ROB-13207 Datasheet by SparkFun Electronics

Page 1 of 2
Cable Carrier - 10x15mm (0.5m Length)
ROB-13207 ROHS
images are CC BY-NC-SA 3.0
Description: No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with
10x15mm bits composing its main body and two screw fasteners at each end for
efficient mounting. Sometimes called a “drag chain,” each carrier can be used in
projects with a large number of moving parts to protect internally installed cables,
pipes, or tubes so they can be bent and moved while remaining protected. Cable
carriers can most commonly been found in 3D printers and CNC machines but they
can be used in any situation where you need cables or tubes to bend without risk of
them being damaged or wearing out prematurely.
This specific cable carrier offers inner dimensions of 10mm (height) by 15mm (wide),
an outer width of 22mm, and a bend radius of 20mm. Additionally, these carriers are
thin enough to fit into an Actobotics channel, making custom slide machines or other
projects even easier to manage. Much like a chain, individual links can be added or
removed to make custom lengths.
Page 1 of 2
Page 2 of 2 https://www.sparkthn.com/products/13207 2/12/2016
Features:
Inner Bit Height: 10mm
Inner Bit Width: 15mm
Outer Bit Height: 14
Outer Bit Width: 22mm
Minimum Bend Radius: 20mm
Reinforced Nylon Structure
Page 2 of 2
2
/
12
/
201
6
htt
p
s://www.s
p
arkfun.com/
p
roducts/1320
7