2029 Datasheet by Adafruit Industries LLC

Assembled Pi Cobbler Plus - Breakout Cable
for Pi B+/A+/Pi 2
The Raspberry Pi B+/Pi 2 has landed on the Maker World like a 40-GPIO pinned,
quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of
our great Model B accessories by hooking up our downgrade cable, its probably a
good time to upgrade your set up and accessorize using all of the Model B+'s / Pi
2's40 pins.
That's why we now carry the Adafruit AssembledPi Cobbler Plus - Breakout and
Cable for Raspberry Pi A+,B+, and Pi 2.It's an add on prototyping Pi Cobbler from
Adafruit specifically designed for the B+ and Pi 2 that you can break out all those
tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless
breadboard. This will make "cobbling together" prototypes with the Pi super easy.
Designed for use with Raspberry Pi Model A+/B+/Pi 2only! No soldering required!
This Cobbler is in a compact shape, which is the least bulky way to wire up. The
cable plugs between the Pi A+/B+/Pi 2computer and the Cobbler breakout. The
Cobbler can plug into any solderless breadboard (or even a prototyping board like
the PermaProto). The Cobbler PCB has all the pins labeled nicely so you can go
forth and build circuits without keeping a pin-out printout at your desk. We think
this will make it more fun to expand the Pi and build custom circuitry with it.
http://www.adafruit.com/product/2029 11/ 13/2015
Please note, this product only contains an assembled Cobbler Plus and 40-pin
ribbon cable (in slimming Adafruit Black). Raspberry Pi B+, solderless breadboard,
breadboarding wires, cables, components, power supply, etc are not included! We
do stock many of those items in the shop, so check those out as well!
Note: The Raspberry Pi Model A+ and Raspberry Pi 2 arealso compatible with this
Technical Details
Technical Details
63mm x 20mm x 11mm / 2.5" x 0.8" x 0.4"
Height with pins: 20mm / 0.8"
Weight: 12g