IPBT-1yy-yy-yy-S-yy Drawing Datasheet by Samtec Inc.

IXXEXX XXESEXX NO OF ROSITTONS OPTION rRA RTOHTANOL [STVLE VH2 NO VGP GUTDE POS SEE FTC A, SH <7 ax.="" keyed="" pol="" ((no="" of="" rosttton;="" x,165[4|9]]="" +="" 0525)="" ref="" lead="" sme="" see="" hg="" 5’="" 9[2="" 76]="" 7h1="" high="" power,="" thru="" hole="" not="" ava="" ref="" «="" (no="" of="" rosttton;="" 7}]="" x.tss[4.t91="" ref="" a="" (usetrtsssrxxrxxrm="" vh2="" htch="" power="" surface="" mount="" ‘(leave="" elan="" (usetrtsssrx="" 7xx72)="" samiec="" wt="" ut="" oz="" bustness="" a="" j="" fl="" 4="" l="" a="" l="" row="" spectficatton="" [mb]="" ref="" q="" ejee="" e="" w="" ,3="" stngle="" (us="" 1="" r="" “="" v="" vi.="" matte="" ttn="" contact="" and="" tatl="" (usetrisssrxxrtrz’="" vim.="" matte="" ttn="" contact="" and="" tatl="" (e="" [usetvtsssvxxvtvz]="" 050[t="" 27]="" ref="" 4="" .7="" ,2os[52t]="" ref="" trbtrxxrs="" t="" ,259[.s.53]="" ‘7="" ref="" t="" t="" .260="" s="" so="" bo[9.65]="" 2-="" ‘="" .405[io,29]="" [="" ]="" ref="" 5="" t="" ref="" ref="." t="" w="" r="" t="" iuigiuigl—‘li="" ‘="" iui="" tt="" tt="" ‘="" 7="" ©="" ‘="" max="" sway="">UCLT72 6861 IPETJXXHTVXXSVRAVGF IPETVXXVSGP 1155503172 6861 \PBTVIXXVHIVXXSGP IPETVXXVSGP 1155601172 5100 \PBTVIXXHZXXSGP IPETVXXSGP 1155602172 6071
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
DECIMALS ANGLES
.XX:
.01[0.3] 2
.XXX:
.005[0.13]
.XXXX:
.0020[0.051]
TOLERANCES ARE:
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
DO NOT
SCALE FROM
THIS PRINT
.405 10.29
REF
.380 9.65
REF
(EITHER DIRECTION)
2
MAX SWAY
.165 4.19
((No OF POSITIONS -1) x .165[4.19])
.008[.20]
.130 3.30
(SEE NOTE 4)
"A"
"A"
T-1S55-01-T-2
IPBT-XX-S
IPBT-108-H1-XX-S SHOWN
FIG 1
C
C
C
C
((No OF POSITIONS x .165[4.19]) + .0525) REF
.259
REF
6.58
.050
REF
1.27
.205
REF
5.21
(No OF POSITIONS -1) x .165[4.19] REF
.109 2.76
REF
01
C
L
02
L
C
IPBT-1XX-XX-XX-S-XX
No OF POSITIONS
-02 THRU -10
ROW SPECIFICATION
-S: SINGLE (USE IPBT-XX-S)
PLATING SPECIFICATION
LEAD STYLE
-H1: HIGH POWER, THRU HOLE
(USE T-1S55-XX-XX-2)
-H2: HIGH POWER, SURFACE MOUNT
(USE T-1S55-XX-XX-2)
OPTION
-RA: RIGHT ANGLE (SEE FIG 2, SHT 2)
[STYLE -H2 NOT AVAILABLE]
-GP: GUIDE POSTS (USE IPBT-XX-S-GP,
SEE FIG 4, SHT 3)
*-K: KEYED POLARIZATION (USE IPBT-XX-S-K)
(SEE FIG 5, SHT 2)
(NOT AVAILABE W/-GP OPTION)
-T: MATTE TIN CONTACT AND TAIL
(USE T-1S55-XX-T-2)
-TM: MATTE TIN CONTACT AND TAIL
(USE T-1S55-XX-T-2)
*(LEAVE BLANK FOR NO KEYED OPTION.
SAMTEC WILL ONLY SUPPORT EXISTING
BUSINESS AS OF REV F.)
.259 6.58
REF
'A' REF
.260 6.60
REF
.045 1.14
SQ
REF
2
MAX SWAY
(EITHER DIRECTION)
SECTION "A"-"A"
C
C
SHEET OF
MATERIAL:
.165 SINGLE ROW TERMINAL ASSEMBLY
BY:
IPBT-1XX-XX-XX-S-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
KEVIN B
05/06/03
3
1
SHEET SCALE: 2:1
INSULATOR: LCP, UL 94 VO COLOR: BLACK
TERMINAL: HIGH COPPER ALLOY
F:\DWG\MISC\MKTG\IPBT-1XX-XX-XX-S-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. PARTS TO BE MOLDED TO POSITION.
3. MINIMUM TERMINAL RETENTION: 1 LB[4.45 N].
4. POST MUST BE WITHIN .005[.13] OF EACH OTHER.
5. PARTS TO BE TUBE PACKAGED, SEE PACKAGING VIEWS SHT 3.
6. THIS FEATURE NOT PRESENT ON -02-S AND -03-S POSITIONS.
ONLY CORNER RIBS (4 PLCS) ARE PRESENT.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION P
ATCH $ \ D I73[4,3E] 90 J REF f 7 ’7 4r 636[17.43] 44k REF i <9 3935:.0050[9.973:o="" 127]="" .147[3="" 73]="" ref="" 4.="" msssmn="" invprocessz="" \nvprocesst="" 7="" zwaswm="" tv="" {ewher="" d‘rect‘dn]©="" .259[6.58]="" ref="" 4i="" 1155570342="" et="" $="" f="" \="" w="" ‘="" 250mm]="" ‘="" e="" ‘="" ref="" e="" 1="" ’="" l?="" 7="" ,="" ,="" ,="" u="" ,="" ,="" ,="" 7="" -="" u="" u="" u="" lu="" u="" u="" i="" 1="" .usoth]="" “bl.="" ©[measureat="" bend)="" 4="" .147="" sect‘on="" ”b"v"b”="" fl="" 2="" ipbivdsvsvk="" fig="" 5="" 7k="" pdlar‘zaiion="" [\pbtvwosvhmxxvsvk="" shown’="" [same="" as="" h6="" 1="" unless="" otherw‘se="" stated’="" l="" 1475:0050="" [37510.13]="" ”75170375="" hg="" 6="" [ifatrmarwrxxrer="" shown]="" [same="" as="" hg}="" unless="" dtherw‘se="" sta="">RonwEuRv my; [3.73] REF Eta:
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
"B"
"B"
.147
REF
3.73
90°
.260 6.60
REF
.060 1.52
(MEASURE AT
BEND)
SECTION "B"-"B"
T-1S55-03-T-2
C
C
.259 6.58
REF
(EITHER DIRECTION)
2
MAX SWAY
01
FIG 2
-RA: RIGHT ANGLE
(IPBT-108-H1-XX-S-RA SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(STYLE -H2 NOT AVAILABLE)
02
C
.3936
±.0050
9.998
±0.127
.173 4.38
REF
.686 17.43
REF
IN-PROCESS 1
T-1S55-03-T-2
LATCH
C
.147
REF
3.73
90°
.1475
±.0050
3.75
±0.13
IN-PROCESS 2
.036 0.90
REF
IPBT-05-S-K
FIG 5
-K: POLARIZATION
(IPBT-105-H1-XX-S-K SHOWN)
(SAME AS FIG 1 UNLESS OTHERWISE STATED)
.036 0.90
REF
IPBT-03-S
SEE NOTE 6
FIG 6
(IPBT-103-H1-XX-S-K SHOWN)
(SAME AS FIG 1 UNLESS OTHERWISE STATED)
SHEET OF
.165 SINGLE ROW TERMINAL ASSEMBLY
BY:
IPBT-1XX-XX-XX-S-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
KEVIN B
05/06/03
3
2
SHEET SCALE: 2:1
REVISION P
F:\DWG\MISC\MKTG\IPBT-1XX-XX-XX-S-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
¥ 41mm] 160mm] " REF ? 7 7V , [15.42] ~14 7, REF .327[E.31]© Trwsssroztrz/ Jams 60] REF INVPROCESS 1 © 450“ 1.43] 115550er72 A “m 7y Ru 74“ H6 3 7 SME VH2. SURFACE MOUNT § (\Rmrwuerzxxrs SHOWN) (D‘FFERENT AS SHOWN OTHERMSE SAME As HG 1) .145[3.53] L 41mm] «J ”“1“ NB OF POS‘T‘ONS COPLANARI'TV \N’PROCESS 2 41szan um[ m] 09 & 40 005[ 15] H ((No DFFDSWONSXJéSMJ?“+,ZAO[6.10]REF 4. m 02 I a ‘7 memos] W THROUGH HoLE SURFACE MOUNT REF TUBE, P17194014“) TUBE. P11440575] TUBE PI § mm 1 4 PLUG W” PLUG. TP707 PLUGI “”551 + Em El EL E1 EL E1 m Ed + momma REF r 1 r 1 PACKAGING VIEW [PARTS TO HAVE RosmoN uv LOADED w t sAMEmREcnoN AsARRow ON TUBE] \PsrxxrerR a.135[3.43] REF chPR rm uc’z ‘ — — [(No OF RosmoNs x .1 .55“ 191’ + 433m 2 27] REF [EZFLL‘VL’J’CL‘ZBLELIEC‘Z‘KRik 5 a m e a — — FIG 4
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
.607 15.42
REF
.160 4.06
REF
.327 8.31
IN-PROCESS 1
T-1S55-02-T-2
C
.145 3.68
90°
-
+
.46 11.6
IN-PROCESS 2
TUBE: PT-1-24-06-51
PLUG: TP-07
THROUGH HOLE
TUBE: PT-1-24-01-40
PLUG: TP-13
RIGHT ANGLE
PACKAGING VIEW
[PARTS TO HAVE POSITION #1 LOADED IN
SAME DIRECTION AS ARROW ON TUBE]
TUBE: PT-1-24-01-58
PLUG: TP-13
SURFACE MOUNT
((No OF POSITIONS x .165[4.19]) +.240[6.10] REF
.135
REF
3.43
((No OF POSITIONS x .165[4.19]) +.483[12.27] REF
.259 6.58
REF
.110
REF
2.79
.160 4.06
REF
IPBT-XX-S-GP
01
02
FIG 4
-GP: GUIDE POSTS
(IPBT-108-H1-XX-S-RA-GP SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1, 2 OR 3)
(AVAILABLE WITH THROUGH HOLE, SURFACE MOUNT & -RA OPTION)
"C"
"C"
FIG 3
STYLE -H2: SURFACE MOUNT
(IPBT-108-H2-XX-S SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.46 11.6
02
01
90°
-
+
.260
REF
6.60
.450 11.43
SECTION "C"-"C"
T-1S55-02-T-2
CC
C
SEE TABLE 2
SHEET OF
.165 SINGLE ROW TERMINAL ASSEMBLY
BY:
IPBT-1XX-XX-XX-S-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
KEVIN B
05/06/03
3
3
SHEET SCALE: 2:1
REVISION P
F:\DWG\MISC\MKTG\IPBT-1XX-XX-XX-S-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322