CAT,CAY 16 Series Datasheet by Bourns Inc.

Datasheet Feedback/Errors

Tesl Method Hated Voltage X 2.5, 5 260 “C :5 ”(1,10 Second 125 °c (30 minmes) , norm 755 °C (30 mmmes) , norm 25a -c um 255 A 5n rsn secnnds .7 Rama Dawn 5 ‘ﬁsunnﬂ \ # T :1 % + 0 Moisture L :3 % +01 ohm ‘000 hours Load We :3 % +01 ohm ‘000 hours rdev CA V 0 4 L

Features

n RoHS compliant*

n Convex and concave terminals

n 2, 4 or 8 isolated elements available

n Resistance tolerance ±1 % and ±5 %

n Resistance range: 10 ohms to 1 megohm

CAT/CAY 16 Series - Chip Resistor Arrays

*RoHS Directive 2015/863, Mar 31, 2015 and Annex.

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Specifications

How To Order

CA Y 16 - 103 J 4 LF

Chip Arrays

Type

• CAT16 = Concave Terminations

• CAY16 = Convex Terminations

Resistance Code

• For 1 % Tolerance:

<100 ohms - “R” represents decimal

point (example: 24R3 = 24.3 ohms)

≥100 ohms - First three digits are

significant, fourth digit represents

number of zeros to follow (example:

8252 = 82.5k ohms)

• For 5 % Tolerance:

<10 ohms - “R” represents decimal

point (example: 4R7 = 4.7 ohms)

≥10 ohms - First two digits are signifi-

cant, third digit represents number of

zeros to follow (example: 474 = 470k

ohms)

• 000 = Zero Ohm Jumper

Resistance Tolerance

• J = ±5 % (2, 4, 8 resistor pkg. and for

Zero Ohm Jumper)

• F = ±1 % (4 resistor pkg. and CAT16-F8)

Resistors

• 2 = 2 Isolated Resistors

• 4 = 4 Isolated Resistors

• 8 = 8 Isolated Resistors

Terminations

• LF = Tin-plated (RoHS compliant)

Requirement Characteristics Test Method

Short Time Overload ±2 % +0.1 ohm Rated Voltage X 2.5, 5 seconds

Soldering Heat ±2 % +0.1 ohm 260 °C ±5 °C, 10 seconds ±1 second

Temperature Cycling (5) ±1 % + 0.1 ohm 125 °C (30 minutes) - normal (15 minutes)

-55 °C (30 minutes) - normal (15 minutes)

Moisture Load Life ±3 % +0.1 ohm 1000 hours

Load Life ±3 % +0.1 ohm 1000 hours

Characteristics

Characteristics CAT16/CAY16

Number of Elements 2 (J2), 4 (F4, J4), 8 (F8, J8)

Power Rating Per Resistor @ 70 °C 0.0625 W

Package Power Rating @ 70 °C 0.250 W

(0.125 W for J2)

Temperature Coefficient of Resistance ±200 PPM/°C

Resistance Tolerance ±1 %, ±5 %

Resistance Range: E24 (J), E96 + E24 (F) 10 ohms - 1 megohm

Zero-Ohm Jumper < 0.05 ohm

Max. Working Voltage 50 V (25 V for CAY16-J8)

Max. Overload Voltage 100 V (50 V for CAY16-J8)

Operating Temp. Range -55 °C - 125 °C

Packaging Size

J2 .......... 0606 Package Size

F4, J4 .... 1206 Package Size

F8 .......... 2406 Package Size for CAT16

J8 .......... 2406 Package Size for CAT16;

1506 Package Size for CAY16

For Standard Values Used in Capacitors,

Inductors, and Resistors, click here.

Soldering Profile for RoHS Compliant Chip Resistors and Arrays

125

175

225

275

050 100 150 200 250 300

Time (Seconds)

Temperature (°C)

60 - 120 seconds

60 - 90

seconds

260 °C peak

190 °C

150 °C

220 °C

Ramp Down

6 °C/second

255 °C

Maximum of 20 seconds between

+255 °C and +260 °C

Ramp Up

3 °C/second maximum

10 seconds minimum

<1>

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

BOURNS CAT‘S-Jm CAT‘S-F4V -J4Cl 0.401015 3.201020 0.801010 1.601020 0.501010 0.301015 (.015 1 .005) (.125 1 .005) (.032 1 .004) (.053 1 .005) (.020 1 .004) (.012 1 .005) 0 0 015 3.201020 0.801010 1.551025 0.501010 0.301020 (.015 1 .005) (.125 1 .005) 032 1 1 .00 051 1.0095 (.020 1 .004) (.012 1 .0051) 0.501015 0.701010 3.201020 0.801005 1.601020 0.501010 0.301020 (.020 1 .005) (.027 1 .004) (.125 1 .005) (.032 1 .002) (.053 1 .005) (.020 1 .004) (.012 1 .0051) 0.401015 1.601015 0.801005 1.601015 0.601015 0.301020 (.015 1 .005) (.053 1 .005) (.032 1 .002) (.053 1 .005) (.024 1 .005) (.012 1 .0051) 0.601015 1.601015 0.761010 1.601015 0.45 +0.15/50,10 0.301020 (.024 1 .005) (.053 1 .005) (.030 1 .004) (.053 1 .005) (.015 +0.005/50,004) (.012 1 .0051) 0.401015 6.401020 0.801015 1.601020 0.601015 0.301020 (.015 1 .005) (.252 1 .005) (.032 1 .005) (.053 1 .005) (.024 1 .005) (.012 1 .0051) 0.301015 0.301015 3.801020 0.501005 1.601020 0.501010 0.301015 (.012 1 .005) (.012 1 .005) (15 1.005) (02 1.002) (.053 1 .005) (.020 1 .004) (.012 1 .005) 51 5 +1 5 *1 5 *1 5 a 5 WWW j i 1 L i i i 1 5+ 1 1 15+ 1 5—1 T 5 +1 T TL 1 1 +1 5 +1 5 *1 5 1 r j . . ﬂ? 3: I 1

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CAT/CAY 16 Series - Chip Resistor Arrays

Derating Curve

Rated power in percentage (%)

Ambient Temperature (˚C)

0-55

0 125

100

Dimensions

DIMENSIONS: MM

(INCHES)

Model A A’ B C D E F

CAT16-F4 0.40 ± 0.15 — 3.20 ± 0.20 0.80 ± 0.10 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.15

(.016 ± .006) (.126 ± .008) (.032 ± .004) (.063 ± .008) (.020 ± .004) (.012 ± .006)

CAT16-J4 0.40 ± 0.15 — 3.20 ± 0.20 0.80 ± 0.10 1.55 ± 0.25 0.50 ± 0.10 0.30 ± 0.20

(.016 ± .006) (.126 ± .008) (.032 ± ± .004) (.061 ± .0098) (.020 ± .004) (.012 ± .008)

CAY16-F4, -J4 0.50 ± 0.15 0.70 ± 0.10 3.20 ± 0.20 0.80 ± 0.05 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.20

(.020 ± .006) (.027 ± .004) (.126 ± .008) (.032 ± .002) (.063 ± .008) (.020 ± .004) (.012 ± .008)

CAT16-J2 0.40 ± 0.15 — 1.60 ± 0.15 0.80 ± 0.05 1.60 ± 0.15 0.60 ± 0.15 0.30 ± 0.20

(.016 ± .006) (.063 ± .006) (.032 ± .002) (.063 ± .006) (.024 ± .006) (.012 ± .008)

CAY16-J2 — 0.60 ± 0.15 1.60 ± 0.15 0.76 ± 0.10 1.60 ± 0.15 0.45 +0.15/-0.10 0.30 ± 0.20

(.024 ± .006) (.063 ± .006) (.030 ± .004) (.063 ± .006) (.018 +0.006/-0.004) (.012 ± .008)

CAT16-F8, -J8 0.40 ± 0.15 — 6.40 ± 0.20 0.80 ± 0.15 1.60 ± 0.20 0.60 ± 0.15 0.30 ± 0.20

(.016 ± .006) (.252 ± .008) (.032 ± .006) (.063 ± .008) (.024 ± .006) (.012 ± .008)

CAY16-J8 0.30 ± 0.15 0.30 ± 0.15 3.80 ± 0.20 0.50 ± 0.05 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.15

(.012 ± .006) (.012 ± .006) (.15 ± .008) (.02 ± .002) (.063 ± .008) (.020 ± .004) (.012 ± .006)

Configurations

CAT16-F4, -J4

CAT16-F8, -J8

CAT16-J2

AA'

CAY16-F4, -J4

AA'

CAY16-J8

CAY16-J2

CAT16-F4, -J4

CAT16-F8, -J8

CAT16-J2

AA'

CAY16-F4, -J4

AA'

CAY16-J8

CAY16-J2

Schematics

R1R2R1R2R3R4

CAT16-F4, -J4

CAY16-F4, -J4



R1R2R3R4

CAT16-F8, -J8

CAY16-J8



R5R6R7R8

CAT16-J2

CAY16-J2

BOURNS 0.710 0.9 0.410 0.45 0.80 2.210 2.6 (02810 .035) .016 to .0178) (.032) (1)8710 .102) 0.710 0.9 0.410 0.45 0.80 2.410 2.8 (02810 .035) (.016 to .0178) (.032) (.094 to .11) 0.710 0.9 0.310 0.35 0.50 2.010 2.2 (02810 .035) (01210 .014) (.020) (.07910 .087) 0.710 0.9 0.410 0.45 0.80 2.210 2.6 (02810 .035) (.016 to .0178) (.032) (1)8710 .102) C 0.710 0.9 0.410 0.5 0.80 2.010 2.6 (02810 .035) (.01610 .020) (.032) (.07910 .102) 1 0 1 5 .01 0 1 40 01 , m 1 1‘ (059.004 0) (155 mmﬁ (027374.311) 130105 (511 020) 50 1 11 11 1 1 71 ”””” ’ (T52) 41 7' 210100 (03 o 004/7 003) W :1: (7037) 3.60 1 0.20 3.50 1.005 8.0 1 0.3 9.0 1 0.3 11.4 11.0 (.142 1.008) (.138 1.004) (.315 1.012) (.354 1.012) (.449 1.040) 1.80 1 0.10 3.50 1.005 8.0 1 0.3 9.0 1 0.3 11.4 11.0 (.070 1.004) (.138 1.004) (.315 1.012) (.354 1.012) (.449 1.040) 6.90 1 0.20 5.50 1 0.10 12.0 1 0.2 13.0 1 0.2 15.4 11.0 (.272 1.008) (.217 1.004) (.472 1.008) (.512 1.008) (.606 1.040) C 4.10 1 0.15 3.50 1 0.05 8.0 1 0.3 9.0 1 0.3 11.4 11.0 (.161 1.012) (.138 1.002) (.315 1.012) (.354 1.012) (.449 1.040)

DIMENSIONS: MM

(INCHES)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CAT/CAY 16 Series - Chip Resistor Arrays

Land Patterns

Solder

resist

Land

Chip

resistor

array

Solder

resist

Land

Chip

resistor

array

Solder

resist

Land

Chip

resistor

array

pSolder

resist

Land

Chip

resistor

array

CAT16-F4, -J4, -F8, -J8 CAY16-F4, -J4, -J8 CAT16-J2 CAY16-J2

Model a b p f

CAT16-F4, -J4, -F8, -J8 0.7 to 0.9 0.4 to 0.45 0.80 2.2 to 2.6

(.028 to .035) (.016 to .0178) (.032) (.087 to .102)

CAY16-F4, -J4 0.7 to 0.9 0.4 to 0.45 0.80 2.4 to 2.8

(.028 to .035) (.016 to .0178) (.032) (.094 to .11)

CAY16-J8 0.7 to 0.9 0.3 to 0.35 0.50 2.0 to 2.2

(.028 to .035) (.012 to .014) (.020) (.079 to .087)

CAT16-J2 0.7 to 0.9 0.4 to 0.45 0.80 2.2 to 2.6

(.028 to .035) (.016 to .0178) (.032) (.087 to .102)

CAY16-J2 0.7 to 0.9 0.4 to 0.5 0.80 2.0 to 2.6

(.028 to .035) (.016 to .020) (.032) (.079 to .102)

Packaging Dimensions

4.0 ± 0.1

(.158 ± .004)

2.0 + 0.1/-0.2

(.08 + .004/-.008) 4.0 ± 0.1

(.157 ± .004)

1.0

(.039) MAX.

1.5 + 0.1 - 0

(.059 + .004 - 0)

180

(7.087)

2.0 ± 0.5

(.079 ± .020)

(2.362)

21.0 ± 0.8

(.827 ± .031)

13.0 ± 0.5

(.511 ± .020)

DIMENSIONS: MM

(INCHES)

Model a b c d e

CAT16-F4, -J4 & CAY16-F4, J4 3.60 ± 0.20 3.50 ± .005 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0

(.142 ± .008) (.138 ± .004) (.315 ± .012) (.354 ± .012) (.449 ± .040)

CAT16-J2 & CAY16-J2 1.80 ± 0.10 3.50 ± .005 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0

(.070 ± .004) (.138 ± .004) (.315 ± .012) (.354 ± .012) (.449 ± .040)

CAT16-F8, -J8 6.90 ± 0.20 5.50 ± 0.10 12.0 ± 0.2 13.0 ± 0.2 15.4 ± 1.0

(.272 ± .008) (.217 ± .004) (.472 ± .008) (.512 ± .008) (.606 ± .040)

CAY16-J8 4.10 ± 0.15 3.50 ± 0.05 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0

(.161 ± .012) (.138 ± .002) (.315 ± .012) (.354 ± .012) (.449 ± .040)

• 5,000 pcs. per reel (J2, J4, CAY16-J8)

4,000 pcs. per reel (CAT16-F8, -J8)

• Paper tape

REV. 12/20

BOURNS Preheaxing Idering Gradual Cooling ‘9 60 sec. min.~>l10730 seek; 120 sec. min. 4»

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Chip Resistor Arrays - Application Note

Component Placement

a. Reduce the mechanical stress to a minimum during and after placing of the unit in order not to damage the terminals and

protective coating.

b. Misplacement of components may cause solder bridges.

Soldering

a. Reflow soldering: Recommendation is shown in the following chart.

b. Wave soldering: Recommendation according to IEC standards.

c. Hand soldering: Don’t touch the protective coating of the part. Solder within 3 seconds when the temperature is over 280 ºC.

250

200

150

100

Preheating Soldering Gradual Cooling

60 sec. min. 10-30 sec. 120 sec. min.

Temperature (°C)

BOURNS'

Legal Disclaimer Notice

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its

affiliates (collectively, “Bourns”).

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change

without notice. Users should check for and obtain the latest relevant information and verify that such information is current and

complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and

statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical

requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary

from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components

in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®

product also can and do vary in different applications and actual performance may vary over time. Users should always verify

the actual performance of the Bourns® product in their specific devices and applications, and make their own independent

judgments regarding the amount of additional test margin to design into their device or application to compensate for

differences between laboratory and real world conditions.

Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry

standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any

failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of

Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their

devices or applications.

Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-

plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or

environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a

case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s

sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and

generally equivalent classifications outside of the United States.

Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such

products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two

authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive

application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns

expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment

or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®

standard product is considered for potential use in automotive applications, it should only be used in such sub-category of

automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard

or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.

Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally

or any other generally equivalent governmental organization standard applicable to products designed or manufactured for

use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft

or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically

approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard

product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the

user’s sole risk.

The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and

the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the

user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply

to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the

design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use

Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions

apply to all uses and applications that violate national or international prohibitions, including embargos or international

regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be

exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior

authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible

to receive U.S. commodities, software, and technical data.

To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,

incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties

of fitness for particular purpose, non-infringement and merchantability.

For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese

bilingual versions are available at:

Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies

PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf

C1753 05/17/18R

CAT,CAY 16 Series Datasheet by Bourns Inc.

INFORMATION

HELP

CONTACT US

FOLLOW US