DD22 Series Datasheet by SCHURTER Inc.

Ratmgs IEC | r10A @ Ta 40 °C / 250VAC. 50Hz Ratmgs UL/CSA | , 10A @ Ta 40 °C / 250VAC: 50/80 Hz medical < 5="" ua="" (250="" v="" so="" hz)="" test="" vo‘lage="" 1="" min/50="" hz="" ratme="" climatic="" calegom="" 25/055/21="" acc.="" to="" ie0="" 60m1="" iprproteclion="" from="" want="" side="" ip40="" acc.="" to="" \ec="" 60529="" class="" \="" acc.="" to="" \ec="" 61140="" quick="" connect="" 6.3="" x="" 0.5="" mm="" mounting="" screw="" torque="" max="" 0="" 5="" nm="" malenal="" housing="" thermoplastic,="" black.="" 0l="" 94vro="" mtbf="" protection="" class="" \="" for="" fusfilinks="" 5="" x="" 20mm="" pale="" techmca‘="" detaus="" team="" data=""> 2'000'000h acc. to MILVHBV217 F
1
Power Entry Modules with Line Filter DD22
https://www.schurter.com /PG06
EMC Products
IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, Line Switch 2-pole, for PCB Mounting
Order required accessories separately
See below:
Approvals and Compliances
C14
70° C
Description
- Panel mount :
Screw-on mounting on PCB , from rear-side
- 4 Functions :
Appliance Inlet Protection class I , Line Switch 2-pole , Fuseholder for
fuse-links 5 x 20 mm 1- or 2-pole , Line filter in standard and medical
version
- V-Lock notch standard
- PCB terminals
Unique Selling Proposition
- Most compact power entry module
- Attractive flat design
- Switch for highest inrush current
- V-Lock cord retaining
Characteristics
- Ultra-compact design. Ideal for low profile designs
- All single elements are already wired
- For added safety "Extra-Safe" fuse drawers are available
- Ideal for application with high transient loads
- Suitable for use in equipment according to IEC/UL 60950
Suitable for use in medical equipment according to IEC/UL 60601-1
Other versions on request
- Fuse drawer 1-pole, plus spare fuse case
- Fuse drawer 2-pole, with shorting bar
- Other rocker marking
- Line switch, illuminated
- Line switch 1-pole
- Medical version M80
- Protection class II, 70°C
References
Alternative: version without line filter DD21
Alternative: Standard version
Weblinks
pdf data sheet, html datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product, Landing Page
Technical Data
Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 250 VAC; 50/60 Hz
Leakage Current standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)
Dielectric Strength > 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (1 min/50 Hz)
Allowable Operation Tempe-
rature
-25 °C to 85 °C
Climatic Category 25/085/21 acc. to IEC 60068-1
IP-Protection from front side IP40 acc. to IEC 60529
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Terminal For PCB mounting 3 mm additional
quick connect 6.3 x 0.8 mm
Panel Thickness S Screw-on mounting: max 3 mm
Mounting screw torque max 0.5 Nm
Material: Housing Thermoplastic, black, UL 94V-0
appliance inlet/-outlet C14 acc. to IEC 60320-1
UL 498 CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class I
Fuseholder 1 or 2 pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
Rated Power Acceptance @
Ta 23 °C
5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per
pole
Power Acceptance @ Ta >
23°C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Line Switch Rocker switch 2-pole, non-illuminated,
acc. to IEC 61058-1
Technical Details
Line Filter Standard and Medical Version, IEC
60939, UL 1283, CSA C22.2 no. 8
Technical Details
MTBF > 2'000'000 h acc. to MIL-HB-217 F
Approvals and Compliances
\ ELSCHIJRTER \
2
Power Entry Modules with Line Filter
DD22 https://www.schurter.com /PG06
EMC Products
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: DD22
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40001522
UL Approvals UL UL File Number: E72928
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements
Designed according to UL 498 Standard for Attachment Plugs and Receptacles
Designed according to UL 1283 Electromagnetic interference filters
Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technology equipment.
Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
El \ ISCHURTER \
3
Power Entry Modules with Line Filter DD22
https://www.schurter.com /PG06
EMC Products
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
White paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Medical Technology SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1
Dimension [mm]
Screw version
49.2
33
29.7
2.15
3.4
11.55
R 4.35
3.55
11.5 14.75
58.5
66.3
4.5 17
±0.10
2.8
47.6
9.8 3.5
0.85
30.8 16.25
30.1
58.5
49.6
±0.15
±0.10
R 4.5±0.05
3.6
60.9
31.5
1)
57.5
48
6.2
±0.20
30.8
3.6
6.641
3.4
1.6
1.6
+0.10
0
57.5
+0.10
0
±0.2
R 4.4
2)
1.6
+0.10
0
3.6
11.5
±0.15
14.75
±0.15
±0.1
6.05
3.55
±0.1
1) all terminals with 1.25 x 0.8
2) Quick connect terminal 6.3 x 0.8
\ um n1 ‘ m mwnwx
4
Power Entry Modules with Line Filter
DD22 https://www.schurter.com /PG06
EMC Products
Technical Data of Filter-Components
Rated Current
[A]
Filter-Type Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
1Standard Version 2 x 10 100 2.2 1
2Standard Version 2 x 4 100 2.2 1
4Standard Version 2 x 1.5 100 2.2 1
6Standard Version 2 x 0.8 100 2.2 1
10 Standard Version 2 x 0.3 100 2.2 1
1Medical Version (M5) 2 x 10 100 - 1
2Medical Version (M5) 2 x 4 100 - 1
4Medical Version (M5) 2 x 1.5 100 - 1
6Medical Version (M5) 2 x 0.8 100 - 1
10 Medical Version (M5) 2 x 0.3 100 - 1
Diagrams
Filter Standard
non-illuminated
L
PE
N
Cx
L1
L2
Cy
Cy
L’
PE’
N’
R
1) 2)
F1
F2
PE”
S
1) Line
2) Load
Filter Medical M5
non-illuminated
L
PE
N
Cx
L1
L2 Cy
L’
PE’
N’
RS
1) 2)
F1
F2
PE”
1) Line
2) Load
Derating Curves
1-pole
Admissible power
acceptance in Watt
020406080 100
I = << In
I = 0.7 In
I = 1.0 In
2.0
1.5
1.0
0.5
0.0
Ambient air temperature Ta °C
2-pole
Admissible power
acceptance in Watt
020406080 100
0.2
0.0
I = << In
I = 0.7 In
I = 1.0 In
1.6
0.6
0.4
0.8
1.2
1.0
1.4
Ambient air temperature Ta °C
Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode
Standard version
1 A 2 A 4 A 6 A
10 A
V \ \ ISCHURTER \
5
Power Entry Modules with Line Filter DD22
https://www.schurter.com /PG06
EMC Products
Medical version (M5)
1 A 2 A 4 A 6 A
10 A
All Variants
Rated Current
[A]
Filter-Type Fuseholder Line Switch Illumination Order Number
1Standard Version 1-pole 2-pole non-illuminated DD22.1111.1111
2Standard Version 1-pole 2-pole non-illuminated DD22.2111.1111
4Standard Version 1-pole 2-pole non-illuminated DD22.4111.1111
6Standard Version 1-pole 2-pole non-illuminated DD22.6111.1111
10 Standard Version 1-pole 2-pole non-illuminated DD22.9111.1111
1Standard Version 2-pole 2-pole non-illuminated DD22.1121.1111
2Standard Version 2-pole 2-pole non-illuminated DD22.2121.1111 █
4Standard Version 2-pole 2-pole non-illuminated DD22.4121.1111
6Standard Version 2-pole 2-pole non-illuminated DD22.6121.1111
10 Standard Version 2-pole 2-pole non-illuminated DD22.9121.1111
1Medical Version (M5) 2-pole 2-pole non-illuminated DD22.1321.1111
2Medical Version (M5) 2-pole 2-pole non-illuminated DD22.2321.1111
4Medical Version (M5) 2-pole 2-pole non-illuminated DD22.4321.1111
6Medical Version (M5) 2-pole 2-pole non-illuminated DD22.6321.1111
10 Medical Version (M5) 2-pole 2-pole non-illuminated DD22.9321.1111
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit 20 Pcs
Required Accessory
Description
Fusedrawer 2
Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert
Fingergrip, 2-pole 4301.1401
Extra-Safe, 2-pole 4301.1403
Fingergrip, 1-pole 4301.1405
Extra-Safe, 1-pole 4301.1407
...
\ ELSCHIJRTER \
6
Power Entry Modules with Line Filter
DD22 https://www.schurter.com /PG06
EMC Products
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with pro-
tection class I 4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for
appliances with protection class I 4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091
Appliance Outlet further types to DD22
Connector Overview complete
4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782
4012 Mounting: Power Supply Cord, 3 x 1 mm², Screw clamps, Connector: IEC C13 4012
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06
Connector further types to DD22 ...
Mating Outlets/Connectors shuttered
Power Cord Overview complete
VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS
Power Cord further types to DD22
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
30.05.2019