MLCC Series HQ Datasheet

Taiyo Yuden

View All Related Products | Download PDF Datasheet

Datasheet

Notice for TAIYO YUDEN Products [ For High Quality and/or Reliability Equipment
(Automotive Electronic Equipment / Industrial Equipment)
]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter TAIYO YUDENs official sales channel ). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDENs official sales
channel.
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to U.S. Export
Administration Regulations , Foreign Exchange and Foreign Trade Control Law of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.

Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
Automotive Application Guide
We classify automotive electronic equipment into the following four application categories and set usable
application categories for each of our products. When using our products for automotive electronic
equipment, please be sure to check such application categories and use our products accordingly. Should
you have any questions on this matter, please contact us.
Category Automotive Electronic Equipment (Typical Example)
POWERTRAIN
・Engine ECU (Electronically Controlled Fuel Injector)
・Cruise Control Unit
・4WS (4 Wheel Steering)
・Automatic Transmission
・Power Steering
・HEV/PHV/EV Core Control (Battery, Inverter, DC-DC)
・Automotive Locator (Car location information providing device), etc.
SAFETY
・ABS (Anti-Lock Brake System)
・ESC (Electronic Stability Control)
・Airbag
・ADAS (Equipment that directly controls running, turning and stopping), etc.
BODY & CHASSIS
・Wiper
・Automatic Door
・Power Window
・Keyless Entry System
・Electric Door Mirror
・Interior Lighting
・LED Headlight
・TPMS (Tire Pressure Monitoring System)
・Anti-Theft Device (Immobilizer), etc.
INFOTAINMENT
・Car Infotainment System
・ITS/Telematics System
・Instrument Cluster
ADAS (Sensor, Equipment that is not interlocked with safety equipment or powertrain), etc.
Automotive Application Guide
15

hq_c_mlcc_e-E07R01
MULTILAYER CERAMIC CAPACITORS
PART NUMBER
J M K 3 1 6 B J 1 0 6 M L H T △=Blank space
①Rated voltage
Code Rated voltage[VDC]
A 4
J 6.3
L 10
E 16
T 25
G 35
U 50
H 100
Q 250
S 630
②Series name
Code Series name
M Multilayer ceramic capacitor
V Multilayer ceramic capacitor for high frequency
W LW reverse type multilayer capacitor
③End termination
Code End termination
K Plated
J Soft Termination
S Cu Internal Electrodes (For High Frequency)
F High Reliability Application
④Dimension(L×W)
Type Dimensions
(L×W)[mm] EIA(inch)
063 0.6 × 0.3 0201
105 1.0 × 0.5 0402
0.52× 1.0 0204
107 1.6 × 0.8 0603
0.8 × 1.6 0306
212 2.0 × 1.25 0805
1.25× 2.0 0508
316 3.2 × 1.6 1206
325 3.2 × 2.5 1210
432 4.5 × 3.2 1812
Note : ※LW reverse type(□WK) only
⑤Dimension tolerance
Code Type L[mm] W[mm] T[mm]
ALL Standard Standard Standard
A
063 0.6±0.05 0.3±0.05 0.3±0.05
105 1.0±0.10 0.5±0.10 0.5±0.10
107 1.6+0.15/-0.05 0.8+0.15/-0.05 0.8+0.15/-0.05
212 2.0+0.15/-0.05 1.25+0.15/-0.05 0.85±0.10
1.25+0.15/-0.05
316 3.2±0.20 1.6±0.20 1.6±0.20
325 3.2±0.30 2.5±0.30 2.5±0.30
B
105 1.0+0.15/-0.05 0.5+0.15/-0.05 0.5+0.15/-0.05
107 1.6+0.20/-0 0.8+0.20/-0 0.8+0.20/-0
212 2.0+0.20/-0 1.25+0.20/-0 0.85±0.10
1.25+0.20/-0
316 3.2±0.30 1.6±0.30 1.6±0.30
C
105 1.0+0.20/-0 0.5+0.20/-0 0.5+0.20/-0
107 1.6+0.25/-0 0.8+0.25/-0 0.8+0.25/-0
212 2.0+0.25/-0 1.25+0.25/-0 1.25+0.25/-0
K
212 2.0±0.15 1.25±0.15 0.85±0.15
316 3.2±0.20 1.6±0.20 1.15±0.20
1.6±0.20
325 3.2±0.50 2.5±0.30 2.5±0.30
Note: . STANDARD EXTERNAL DIMENSIONS = Blank space
⑥Temperature characteristics code
■High dielectric type
Code Applicable
standard
Temperature
range[℃] Ref. Temp.[℃] Capacitance change Capacitance
tolerance
Tolerance
code
BJ EIA X5R -55~+ 85 25 ±15% ±10% K
±20% M
C6 EIA X6S -55~+105 25 ±22% ±10% K
±20% M
B7 EIA X7R -55~+125 25 ±15% ±10% K
±20% M
C7 EIA X7S -55~+125 25 ±22% ±10% K
±20% M
D7 EIA X7T -55~+125 25 +22%/-33% ±10% K
±20% M
REFLOW
AEC-Q200
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
MULTILAYER CERAMIC CAPACITORS
REFLOW
18

AEC- Q200
hq_c_mlcc_e-E07R01
■Temperature compensating type
Code Applicable
standard
Temperature
range[℃] Ref. Temp.[℃] Capacitance change Capacitance
tolerance
Tolerance
code
CG
JIS CG
-55~+125
20
0±30ppm/℃
±0.1pF B
±0.25pF C
±0.5pF D
EIA C0G 25
±1pF F
±2% G
±5% J
⑦Nominal capacitance
Code
(example) Nominal capacitance
0R5 0.5pF
010 1pF
100 10pF
101 100pF
102 1,000pF
103 0.01μF
104 0.1μF
105 1.0μF
106 10μF
107 100μF
Note : R=Decimal point
⑧Capacitance tolerance
Code Capacitance tolerance
A ±0.05pF
B ±0.1pF
C ±0.25pF
D ±0.5pF
G ±2%
J ±5%
K ±10%
M ±20%
⑨Thickness
Code Thickness[mm]
P 0.3
T
V 0.5
C 0.7(107type or more)
A 0.8
D 0.85(212type or more)
F 1.15
G 1.25
L 1.6
N 1.9
M 2.5
⑩Special code
Code Special code
H MLCC for Industrial and Automotive
⑪Packaging
Code Packaging
F φ178mm Taping (2mm pitch)
R φ178mm Embossed Taping (4mm pitch)
T φ178mm Taping (4mm pitch)
P φ178mm Taping (4mm pitch, 1000 pcs/reel)
325 type(Thickness code M)
⑫Internal code
Code Internal code
Standard
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
19
hq_c_mlcc_e-E07R01
STANDARD EXTERNAL DIMENSIONS
LW reverse type
Type( EIA ) Dimension [mm] (inch)
L W T *1 e
□MK063(0201) 0.6±0.03
(0.024±0.001)
0.3±0.03
(0.012±0.001)
0.3±0.03
(0.012±0.001) T 0.15±0.05
(0.006±0.002)
□MK105(0402)
□MF105(0402)
1.0±0.05
(0.039±0.002)
0.5±0.05
(0.020±0.002)
0.5±0.05
(0.020±0.002) V 0.25±0.10
(0.010±0.004)
□WK105(0204)※ 0.52±0.05
(0.020±0.002)
1.0±0.05
(0.039±0.002)
0.3±0.05
(0.012±0.002) P 0.18±0.08
(0.007±0.003)
□MK107(0603)
□MF107(0603)
1.6±0.10
(0.063±0.004)
0.8±0.10
(0.031±0.004)
0.8±0.10
(0.031±0.004) A 0.35±0.25
(0.014±0.010)
□MJ107(0603) 1.6±0.10
(0.063±0.004)
0.8±0.10
(0.031±0.004)
0.8±0.10
(0.031±0.004) A 0.35+0.3/-0.25
(0.014+0.012/-0.010)
□VS107(0603) 1.6±0.10
(0.063±0.004)
0.8±0.10
(0.031±0.004)
0.7±0.10
(0.028±0.004) C 0.35±0.25
(0.014±0.010)
□WK107(0306)※ 0.8±0.10
(0.031±0.004)
1.6±0.10
(0.063±0.004)
0.5±0.05
(0.020±0.002) V 0.25±0.15
(0.010±0.006)
□MK212(0805)
□MF212(0805)
2.0±0.10
(0.079±0.004)
1.25±0.10
(0.049±0.004)
0.85±0.10
(0.033±0.004) D 0.5±0.25
(0.020±0.010)
1.25±0.10
(0.049±0.004) G
□MJ212(0805) 2.0±0.10
(0.079±0.004)
1.25±0.10
(0.049±0.004)
0.85±0.10
(0.033±0.004) D 0.5+0.35/-0.25
(0.020+0.014/-0.010)
1.25±0.10
(0.049±0.004) G
□VS212(0805) 2.0±0.10
(0.079±0.004)
1.25±0.10
(0.049±0.004)
0.85±0.10
(0.033±0.004) D 0.5±0.25
(0.020±0.010)
□WK212(0508)※ 1.25±0.15
(0.049±0.006)
2.0±0.15
(0.079±0.006)
0.85±0.10
(0.033±0.004) D 0.3±0.2
(0.012±0.008)
□MK316(1206)
□MF316(1206)
3.2±0.15
(0.126±0.006)
1.6±0.15
(0.063±0.006)
1.15±0.10
(0.045±0.004) 0.5+0.35/-0.25
(0.020+0.014/-0.010)
1.6±0.20
(0.063±0.008) L
□MJ316(1206) 3.2±0.15
(0.126±0.006)
1.6±0.15
(0.063±0.006)
1.15±0.10
(0.045±0.004) 0.6+0.4/-0.3
(0.024+0.016/-0.012)
1.6±0.20
(0.063±0.008) L
□MK325(1210)
□MF325(1210)
3.2±0.30
(0.126±0.012)
2.5±0.20
(0.098±0.008)
1.15±0.10
(0.045±0.004) F
0.6±0.3
(0.024±0.012)
1.9±0.20
(0.075±0.008) N
2.5±0.20
(0.098±0.008) M
□MJ325(1210) 3.2±0.30
(0.126±0.012)
2.5±0.20
(0.098±0.008)
1.9±0.20
(0.075±0.008) N 0.6+0.4/-0.3
(0.024+0.016/-0.012)
2.5±0.20
(0.098±0.008) M
□MK432(1812) 4.5±0.40
(0.177±0.016)
3.2±0.30
(0.126±0.012)
2.5±0.20
(0.098±0.008) M 0.9±0.6
(0.035±0.024)
Note : ※. LW reverse type, *1.Thickness code
W
L
e
T
T
L
W
e
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
20
hq_c_mlcc_e-E07R01
STANDARD QUANTITY
Type EIA(inch) Dimension Standard quantity[pcs]
[mm] Code Paper tape Embossed tape
063 0201 0.3 T 15000
105 0402 0.5 V 10000
0204 0.30 P
107 0603
0.7 C 4000
0.8 A
0.8 A 3000
(Soft Termination)
0.8 A 3000
(Soft Termination)
0306 0.50 V 4000
212 0805
0.85 D 4000
1.25 G 3000
1.25 G 2000
(Soft Termination)
0508 0.85 D 4000
316 1206 1.15 F 3000
1.6 L 2000
325 1210
1.15 F 2000
1.9 N
2.5 M 500(T),1000(P)
432 1812 2.5 M 500
Note : ※.LW Reverse type(□WK)
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
21
PART NUMBER
・ All the Multilayer Ceramic Capacitors of the catalog lineup are RoHS compliant.
・ Capacitance tolerance code is applied to [] of part number.
・ All the Multilayer Ceramic Capacitors in the catalog lineup are applicable for reflow-soldering.
Note)
・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
・ *1: Automotive (AEC-Q200 Qualified) products for BODY & CHASSIS, and INFOTAINMENT. Please check ”Automotive Application Guide” for further details before using the products.
  <         :AEC-Q200 qualified>
     All the Multilayer Ceramic Capacitors of *1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item.
     125℃ products: AEC-Q200 Grade1 (we conduct the evaluation at the test condition of Grade1.)
     105℃ products: AEC-Q200 Grade2 (we conduct the evaluation at the test condition of Grade2.)
      85℃ products: AEC-Q200 Grade3 (we conduct the evaluation at the test condition of Grade3.)
     Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
     and please review and approve TAIYO YUDEN's product specification before ordering.
・ *2: Industrial products and Medical products
・ *3: For standard case size, please kindly refer to ④Dimension, ⑤Dimension tolerance, ⑨Thickness and STANDARD EXTERNAL DIMENSIONS.
Multilayer Ceramic Capacitors (High dielectric type)
105TYPE (Demension:1.0×0.5mm JIS:1005 EIA:0402)
【Temperature Characteristic BJ : X5R(-55~+85℃)】 0.5mm thickness(V)
HTLT
Rated voltage x %
UMK105 BJ471[]VHF X5R 470 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 BJ102[]VHF X5R 1000 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 BJ152[]VHF X5R 1500 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 BJ222[]VHF X5R 2200 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 BJ332[]VHF X5R 3300 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 BJ472[]VHF X5R 4700 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 BJ682[]VHF X5R 6800 p ±10, ±20 2.5 150 0.5±0.05 *1, *2
UMK105 BJ103[]VHF X5R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
UMK105 BJ223[]VHF X5R 0.022 μ ±10, ±20 5 200 0.5±0.05 *1, *2
UMK105 BJ473[]VHF X5R 0.047 μ ±10, ±20 5 200 0.5±0.05 *1, *2
UMK105 BJ104[]VHF X5R 0.1 μ ±10, ±20 10 150 0.5±0.05 *1, *2
TMK105 BJ472[]VHF X5R 4700 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
TMK105 BJ682[]VHF X5R 6800 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
TMK105 BJ103[]VHF X5R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
TMK105 BJ153[]VHF X5R 0.015 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
TMK105 BJ223[]VHF X5R 0.022 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
TMK105 BJ333[]VHF X5R 0.033 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
TMK105 BJ473[]VHF X5R 0.047 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
TMK105 BJ104[]VHF X5R 0.1 μ ±10, ±20 5 150 0.5±0.05 *1, *2
TMK105 BJ224[]VHF X5R 0.22 μ ±10, ±20 10 150 0.5±0.05 *1, *2
TMK105ABJ474[]VHF X5R 0.47 μ ±10, ±20 10 150 0.5±0.10 *1, *2
EMK105 BJ103[]VHF X5R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
EMK105 BJ153[]VHF X5R 0.015 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
EMK105 BJ223[]VHF X5R 0.022 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
EMK105 BJ333[]VHF X5R 0.033 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
EMK105 BJ473[]VHF X5R 0.047 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
EMK105 BJ104[]VHF X5R 0.1 μ ±10, ±20 5 150 0.5±0.05 *1, *2
EMK105 BJ224[]VHF X5R 0.22 μ ±10, ±20 10 150 0.5±0.05 *1, *2
EMK105ABJ474[]VHF X5R 0.47 μ ±10, ±20 10 150 0.5±0.10 *1, *2
EMK105 BJ105[]VHF X5R 1 μ ±10, ±20 10 150 0.5±0.05 *1, *2
LMK105 BJ333[]VHF X5R 0.033 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
LMK105 BJ473[]VHF X5R 0.047 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
LMK105 BJ104[]VHF X5R 0.1 μ ±10, ±20 5 150 0.5±0.05 *1, *2
LMK105 BJ224[]VHF X5R 0.22 μ ±10, ±20 5 150 0.5±0.05 *1, *2
LMK105ABJ474[]VHF X5R 0.47 μ ±10, ±20 10 150 0.5±0.10 *1, *2
LMK105 BJ105[]VHF X5R 1 μ ±10, ±20 10 150 0.5±0.05 *1, *2
LMK105ABJ225[]VHF X5R 2.2 μ ±10, ±20 10 150 0.5±0.10 *1, *2
JMK105 BJ104[]VHF X5R 0.1 μ ±10, ±20 5 150 0.5±0.05 *1, *2
JMK105 BJ224[]VHF X5R 0.22 μ ±10, ±20 5 150 0.5±0.05 *1, *2
JMK105 BJ474[]VHF X5R 0.47 μ ±10, ±20 10 150 0.5±0.05 *1, *2
JMK105 BJ105[]VHF X5R 1 μ ±10, ±20 10 150 0.5±0.05 *1, *2
JMK105 BJ225[]VHF X5R 2.2 μ ±10, ±20 10 150 0.5±0.05 *1, *2
JMK105BBJ475MVHF X5R 4.7 μ ±20 10 150 0.5+0.15/-0.05 *1, *2
AMK105 BJ225[]VHF X5R 2.2 μ ±10, ±20 10 150 0.5±0.05 *1, *2
AMK105BBJ475MVHF X5R 4.7 μ ±20 10 150 0.5+0.15/-0.05 *1, *2
AMK105CBJ106MVHF X5R 10 μ ±20 10 150 0.5+0.20/-0 *1, *2
6.3
4
tanδ
[%] Thickness
*3
[mm] Note
50
25
16
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
10
AEC-Q200
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
22
PART NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃)】 0.5mm thickness(V)
HTLT
Rated voltage x %
UMK105 B7221[]VHF X7R 220 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 B7331[]VHF X7R 330 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 B7471[]VHF X7R 470 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 B7681[]VHF X7R 680 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 B7102[]VHF X7R 1000 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 B7152[]VHF X7R 1500 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 B7222[]VHF X7R 2200 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 B7332[]VHF X7R 3300 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
UMK105 B7472[]VHF X7R 4700 p ±10, ±20 2.5 150 0.5±0.05 *1, *2
UMK105 B7682[]VHF X7R 6800 p ±10, ±20 2.5 150 0.5±0.05 *1, *2
UMK105 B7103[]VHF X7R 0.01 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
UMK105 B7223[]VHF X7R 0.022 μ ±10, ±20 10 200 0.5±0.05 *1, *2
UMK105 B7473[]VHF X7R 0.047 μ ±10, ±20 10 200 0.5±0.05 *1, *2
UMK105 B7104[]VHF X7R 0.1 μ ±10, ±20 10 150 0.5±0.05 *1, *2
TMK105 B7472[]VHF X7R 4700 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
TMK105 B7682[]VHF X7R 6800 p ±10, ±20 2.5 200 0.5±0.05 *1, *2
TMK105 B7103[]VHF X7R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
TMK105 B7153[]VHF X7R 0.015 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
TMK105 B7223[]VHF X7R 0.022 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
TMK105 B7333[]VHF X7R 0.033 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
TMK105 B7473[]VHF X7R 0.047 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
TMK105 B7104[]VHF X7R 0.1 μ ±10, ±20 10 150 0.5±0.05 *1, *2
EMK105 B7103[]VHF X7R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1, *2
EMK105 B7153[]VHF X7R 0.015 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
EMK105 B7223[]VHF X7R 0.022 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
EMK105 B7333[]VHF X7R 0.033 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
EMK105 B7473[]VHF X7R 0.047 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
EMK105 B7104[]VHF X7R 0.1 μ ±10, ±20 5 150 0.5±0.05 *1, *2
EMK105 B7224[]VHF X7R 0.22 μ ±10, ±20 10 150 0.5±0.05 *1, *2
LMK105 B7473[]VHF X7R 0.047 μ ±10, ±20 3.5 150 0.5±0.05 *1, *2
LMK105 B7104[]VHF X7R 0.1 μ ±10, ±20 5 150 0.5±0.05 *1, *2
LMK105 B7224[]VHF X7R 0.22 μ ±10, ±20 10 150 0.5±0.05 *1, *2
JMK105 B7104[]VHF X7R 0.1 μ ±10, ±20 5 150 0.5±0.05 *1, *2
JMK105 B7224[]VHF X7R 0.22 μ ±10, ±20 10 150 0.5±0.05 *1, *2
JMK105 B7474[]VHF X7R 0.47 μ ±10, ±20 10 150 0.5±0.05 *1, *2
AMK105 B7474[]VHF 4 X7R 0.47 μ ±10, ±20 10 150 0.5±0.05 *1, *2
107TYPE  (Dimension:1.6×0.8mm JIS:1608 EIA:0603)
【Temperature Characteristic BJ : X5R(-55~+85℃)】 0.8mm thickness(A)
HTLT
Rated voltage x %
UMK107 BJ104[]AHT X5R 0.1 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
UMK107 BJ224[]AHT X5R 0.22 μ ±10, ±20 10 150 0.8±0.10 *1, *2
UMK107 BJ474[]AHT X5R 0.47 μ ±10, ±20 10 150 0.8±0.10 *1, *2
UMK107ABJ105[]AHT X5R 1 μ ±10, ±20 10 150 0.8+0.15/-0.05 *1, *2
GMK107 BJ223[]AHT X5R 0.022 μ ±10, ±20 2.5 200 0.8±0.10 *1, *2
GMK107 BJ473[]AHT X5R 0.047 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
GMK107 BJ104[]AHT X5R 0.1 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
GMK107 BJ224[]AHT X5R 0.22 μ ±10, ±20 10 150 0.8±0.10 *1, *2
GMK107ABJ474[]AHT X5R 0.47 μ ±10, ±20 10 150 0.8+0.15/-0.05 *1, *2
GMK107 BJ105[]AHT X5R 1 μ ±10, ±20 10 150 0.8±0.10 *1, *2
TMK107 BJ223[]AHT X5R 0.022 μ ±10, ±20 2.5 200 0.8±0.10 *1, *2
TMK107 BJ473[]AHT X5R 0.047 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
TMK107 BJ104[]AHT X5R 0.1 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
TMK107 BJ224[]AHT X5R 0.22 μ ±10, ±20 5 150 0.8±0.10 *1, *2
TMK107 BJ474[]AHT X5R 0.47 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
TMK107 BJ105[]AHT X5R 1 μ ±10, ±20 10 150 0.8±0.10 *1, *2
TMK107BBJ225[]AHT X5R 2.2 μ ±10, ±20 10 150 0.8+0.20/-0 *1, *2
EMK107 BJ104[]AHT X5R 0.1 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
EMK107 BJ224[]AHT X5R 0.22 μ ±10, ±20 5 150 0.8±0.10 *1, *2
EMK107 BJ474[]AHT X5R 0.47 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
EMK107 BJ105[]AHT X5R 1 μ ±10, ±20 5 150 0.8±0.10 *1, *2
EMK107ABJ225[]AHT X5R 2.2 μ ±10, ±20 10 150 0.8+0.15/-0.05 *1, *2
EMK107BBJ475[]AHT X5R 4.7 μ ±10, ±20 10 150 0.8+0.20/-0 *1, *2
LMK107 BJ474[]AHT X5R 0.47 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
LMK107 BJ105[]AHT X5R 1 μ ±10, ±20 5 150 0.8±0.10 *1, *2
LMK107 BJ225[]AHT X5R 2.2 μ ±10, ±20 10 150 0.8±0.10 *1, *2
LMK107 BJ475[]AHT X5R 4.7 μ ±10, ±20 10 150 0.8±0.10 *1, *2
LMK107BBJ106MAHT X5R 10 μ ±20 10 150 0.8+0.20/-0 *1, *2
JMK107 BJ105[]AHT X5R 1 μ ±10, ±20 5 150 0.8±0.10 *1, *2
JMK107 BJ225[]AHT X5R 2.2 μ ±10, ±20 10 150 0.8±0.10 *1, *2
JMK107 BJ475[]AHT X5R 4.7 μ ±10, ±20 10 150 0.8±0.10 *1, *2
JMK107ABJ106[]AHT X5R 10 μ ±10, ±20 10 150 0.8+0.15/-0.05 *1, *2
AMK107ABJ106[]AHT X5R 10 μ ±10, ±20 10 150 0.8+0.15/-0.05 *1, *2
AMK107BBJ226MAHT X5R 22 μ ±20 10 150 0.8+0.20/-0 *1, *2
35
25
16
10
6.3
4
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%]
50
25
16
Thickness
*3
[mm] Note
50
10
6.3
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
23
PART NUMBER
【Temperature Characteristic B7 :
X7R(-55~+125℃), C7 : X7S(-55~+125℃), D7 : X7T(-55~+125℃)】 0.8mm thickness(A)
HTLT
Rated voltage x %
UMK107 B7102[]AHT X7R 1000 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7152[]AHT X7R 1500 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7222[]AHT X7R 2200 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7332[]AHT X7R 3300 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7472[]AHT X7R 4700 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7682[]AHT X7R 6800 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7103[]AHT X7R 0.01 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7153[]AHT X7R 0.015 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7223[]AHT X7R 0.022 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7333[]AHT X7R 0.033 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 B7683[]AHT X7R 0.068 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
UMK107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
UMK107 C7224[]AHTE X7S 0.22 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
GMK107 B7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
GMK107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
GMK107 B7224[]AHT X7R 0.22 μ ±10, ±20 10 150 0.8±0.10 *1, *2
GMK107 B7474[]AHT X7R 0.47 μ ±10, ±20 10 150 0.8±0.10 *1, *2
GMK107AB7105[]AHT X7R 1 μ ±10, ±20 10 150 0.8+0.15/-0.05 *1, *2
TMK107 B7223[]AHT X7R 0.022 μ ±10, ±20 2.5 200 0.8±0.10 *1, *2
TMK107 B7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
TMK107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
TMK107 B7224[]AHT X7R 0.22 μ ±10, ±20 10 150 0.8±0.10 *1, *2
TMK107 B7474[]AHT X7R 0.47 μ ±10, ±20 10 150 0.8±0.10 *1, *2
TMK107AB7105[]AHT X7R 1 μ ±10, ±20 10 150 0.8+0.15/-0.05 *1, *2
EMK107 B7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
EMK107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
EMK107 B7224[]AHT X7R 0.22 μ ±10, ±20 5 150 0.8±0.10 *1, *2
EMK107 B7474[]AHT X7R 0.47 μ ±10, ±20 10 150 0.8±0.10 *1, *2
EMK107 B7105[]AHT X7R 1 μ ±10, ±20 10 150 0.8±0.10 *1, *2
LMK107 B7224[]AHT X7R 0.22 μ ±10, ±20 5 150 0.8±0.10 *1, *2
LMK107 B7474[]AHT X7R 0.47 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
LMK107 B7105[]AHT X7R 1 μ ±10, ±20 10 150 0.8±0.10 *1, *2
LMK107BD7225[]AHT X7T 2.2 μ ±10, ±20 10 200 0.8+0.20/-0 *1, *2
JMK107 B7105[]AHT X7R 1 μ ±10, ±20 10 150 0.8±0.10 *1, *2
JMK107 B7225[]AHTR X7R 2.2 μ ±10, ±20 10 150 0.8±0.10 *1, *2
212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805)
【Temperature Characteristic BJ
: X5R(-55~+85℃)】 1.25mm thickness(G)
HTLT
Rated voltage x %
UMK212 BJ104[]GHT X5R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
UMK212 BJ224[]GHT X5R 0.22 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
UMK212 BJ474[]GHT X5R 0.47 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
UMK212 BJ105[]GHT X5R 1 μ ±10, ±20 5 150 1.25±0.10 *1, *2
GMK212 BJ104[]GHT X5R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
GMK212 BJ224[]GHT X5R 0.22 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
GMK212 BJ474[]GHT X5R 0.47 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
GMK212 BJ105[]GHT X5R 1 μ ±10, ±20 5 150 1.25±0.10 *1, *2
GMK212BBJ225[]GHT X5R 2.2 μ ±10, ±20 10 150 1.25+0.20/-0 *1, *2
TMK212 BJ104[]GHT X5R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
TMK212 BJ224[]GHT X5R 0.22 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
TMK212 BJ474[]GHT X5R 0.47 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
TMK212 BJ105[]GHT X5R 1 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
TMK212 BJ225[]GHT X5R 2.2 μ ±10, ±20 5 150 1.25±0.10 *1, *2
TMK212BBJ475[]GHT X5R 4.7 μ ±10, ±20 10 150 1.25+0.20/-0 *1, *2
TMK212BBJ106[]GHT X5R 10 μ ±10, ±20 10 150 1.25+0.20/-0 *1, *2
EMK212 BJ105[]GHT X5R 1 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
EMK212 BJ225[]GHT X5R 2.2 μ ±10, ±20 5 150 1.25±0.10 *1, *2
EMK212ABJ475[]GHT X5R 4.7 μ ±10, ±20 10 150 1.25+0.15/-0.05 *1, *2
EMK212BBJ106[]GHT X5R 10 μ ±10, ±20 10 150 1.25+0.20/-0 *1, *2
LMK212 BJ225[]GHT X5R 2.2 μ ±10, ±20 5 200 1.25±0.10 *1, *2
LMK212ABJ475[]GHT X5R 4.7 μ ±10, ±20 10 150 1.25+0.15/-0.05 *1, *2
LMK212ABJ106[]GHT X5R 10 μ ±10, ±20 10 150 1.25+0.15/-0.05 *1, *2
JMK212ABJ475[]GHT X5R 4.7 μ ±10, ±20 5 200 1.25+0.15/-0.05 *1, *2
JMK212ABJ106[]GHT X5R 10 μ ±10, ±20 10 150 1.25+0.15/-0.05 *1, *2
JMK212BBJ226MGHT X5R 22 μ ±20 10 150 1.25+0.20/-0 *1, *2
AMK212ABJ226MGHT X5R 22 μ ±20 10 150 1.25+0.15/-0.05 *1, *2
AMK212BBJ476MGHT X5R 47 μ ±20 10 150 1.25+0.20/-0 *1, *2
【Temperature Characteristic BJ
: X5R(-55~+85℃)】 0.85mm thickness(D)
HTLT
Rated voltage x %
EMK212 BJ105[]DHT X5R 1 μ ±10, ±20 5 200 0.85±0.10 *1, *2
EMK212ABJ225[]DHT X5R 2.2 μ ±10, ±20 5 150 0.85±0.10 *1, *2
EMK212BBJ475[]DHT X5R 4.7 μ ±10, ±20 10 150 0.85±0.10 *1, *2
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
16
4
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
50
35
25
16
10
6.3
Part number 1 Part number 2 Rated voltage
[V]
tanδ
[%] Thickness
*3
[mm] Note
50
35
25
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
16
10
6.3
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
24
PART NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.25mm thickness(G)
HTLT
Rated voltage x %
UMK212 B7103[]GHT X7R 0.01 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
UMK212 B7153[]GHT X7R 0.015 μ ±10, ±20 2.5 200 1.25±0.10 *1, *2
UMK212 B7223[]GHT X7R 0.022 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
UMK212 B7333[]GHT X7R 0.033 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
UMK212 B7473[]GHT X7R 0.047 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
UMK212 B7683[]GHT X7R 0.068 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
UMK212 B7104[]GHT X7R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
UMK212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
UMK212 C7474[]GHTE X7S 0.47 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
UMK212 B7105[]GHT X7R 1 μ ±10, ±20 10 150 1.25±0.10 *1, *2
GMK212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
GMK212 B7105[]GHT X7R 1 μ ±10, ±20 10 150 1.25±0.10 *1, *2
TMK212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
TMK212 B7334[]GHT X7R 0.33 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
TMK212 B7474[]GHT X7R 0.47 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
TMK212 B7105[]GHTR X7R 1 μ ±10, ±20 10 150 1.25±0.10 *1, *2
TMK212 B7225[]GHT X7R 2.2 μ ±10, ±20 10 150 1.25±0.10 *1, *2
EMK212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
EMK212 B7334[]GHT X7R 0.33 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
EMK212 B7474[]GHT X7R 0.47 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
EMK212 B7105[]GHTR X7R 1 μ ±10, ±20 10 150 1.25±0.10 *1, *2
EMK212 B7225[]GHT X7R 2.2 μ ±10, ±20 10 150 1.25±0.10 *1, *2
EMK212AB7475[]GHT X7R 4.7 μ ±10, ±20 10 150 1.25+0.15/-0.05 *1, *2
LMK212 B7105[]GHTR X7R 1 μ ±10, ±20 10 150 1.25±0.10 *1, *2
LMK212 B7225[]GHT X7R 2.2 μ ±10, ±20 10 150 1.25±0.10 *1, *2
LMK212 B7475[]GHT X7R 4.7 μ ±10, ±20 10 150 1.25±0.10 *1, *2
JMK212 B7475[]GHT X7R 4.7 μ ±10, ±20 10 150 1.25±0.10 *1, *2
JMK212AB7106[]GHT X7R 10 μ ±10, ±20 10 150 1.25+0.15/-0.05 *1, *2
316TYPE (Dimension:3.2×1.6mm JIS:3216 EIA:1206)
【Temperature Characteristic BJ : X5R(-55~+85℃)】 1.6mm thickness(L)
HTLT
Rated voltage x %
UMK316 BJ474[]LHT X5R 0.47 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 BJ105[]LHT X5R 1 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 BJ225[]LHT X5R 2.2 μ ±10, ±20 10 150 1.6±0.20 *1, *2
UMK316ABJ475[]LHT X5R 4.7 μ ±10, ±20 10 150 1.6±0.20 *1, *2
GMK316 BJ105[]LHT X5R 1 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
GMK316 BJ225[]LHT X5R 2.2 μ ±10, ±20 10 150 1.6±0.20 *1, *2
GMK316 BJ475[]LHT X5R 4.7 μ ±10, ±20 10 150 1.6±0.20 *1, *2
GMK316BBJ106[]LHT X5R 10 μ ±10, ±20 10 150 1.6±0.30 *1, *2
TMK316 BJ225[]LHT X5R 2.2 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
TMK316 BJ475[]LHT X5R 4.7 μ ±10, ±20 5 150 1.6±0.20 *1, *2
TMK316 BJ106[]LHT X5R 10 μ ±10, ±20 5 150 1.6±0.20 *1, *2
EMK316 BJ225[]LHT X5R 2.2 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
EMK316 BJ475[]LHT X5R 4.7 μ ±10, ±20 5 150 1.6±0.20 *1, *2
EMK316 BJ106[]LHT X5R 10 μ ±10, ±20 5 150 1.6±0.20 *1, *2
EMK316BBJ226MLHT X5R 22 μ ±20 10 150 1.6±0.30 *1, *2
LMK316 BJ475[]LHT X5R 4.7 μ ±10, ±20 5 150 1.6±0.20 *1, *2
LMK316 BJ106[]LHT X5R 10 μ ±10, ±20 5 150 1.6±0.20 *1, *2
LMK316ABJ226[]LHT X5R 22 μ ±10, ±20 10 150 1.6±0.20 *1, *2
JMK316 BJ106[]LHT X5R 10 μ ±10, ±20 5 200 1.6±0.20 *1, *2
JMK316ABJ226[]LHT X5R 22 μ ±10, ±20 10 150 1.6±0.20 *1, *2
JMK316ABJ476MLHT X5R 47 μ ±20 10 150 1.6±0.20 *1, *2
JMK316BBJ107MLHT X5R 100 μ ±20 10 150 1.6±0.30 *2
AMK316ABJ107MLHT 4 X5R 100 μ ±20 10 150 1.6±0.20 *2
6.3
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
50
35
25
16
10
25
16
10
6.3
Part number 1 Part number 2 Rated voltage
[V]
Capacitance
tolerance [%]
tanδ
[%]
Part number 1 Part number 2 Thickness
*3
[mm] Note
50
35
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
25
PART NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃), C7 : X7S(-55~+125℃)】 1.6mm thickness(L)
HTLT
Rated voltage x %
UMK316 B7473[]LHT X7R 0.047 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 B7683[]LHT X7R 0.068 μ ±10, ±20 2.5 200 1.6±0.20 *1, *2
UMK316 B7104[]LHT X7R 0.1 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 B7154[]LHT X7R 0.15 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 B7224[]LHT X7R 0.22 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 B7334[]LHT X7R 0.33 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 B7474[]LHT X7R 0.47 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 B7105[]LHT X7R 1 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
UMK316 B7225[]LHT X7R 2.2 μ ±10, ±20 10 150 1.6±0.20 *1, *2
UMK316AC7475[]LHTE X7S 4.7 μ ±10, ±20 2.5 150 1.6±0.20 *1, *2
GMK316 B7105[]LHT X7R 1 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
GMK316 B7225[]LHT X7R 2.2 μ ±10, ±20 10 150 1.6±0.20 *1, *2
GMK316AB7475[]LHT X7R 4.7 μ ±10, ±20 10 150 1.6±0.20 *1, *2
TMK316 B7105[]LHT X7R 1 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
TMK316 B7225[]LHT X7R 2.2 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
TMK316AB7475[]LHT X7R 4.7 μ ±10, ±20 10 150 1.6±0.20 *1, *2
TMK316AB7106[]LHT X7R 10 μ ±10, ±20 10 150 1.6±0.20 *1, *2
EMK316 B7225[]LHT X7R 2.2 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
EMK316AB7475[]LHT X7R 4.7 μ ±10, ±20 10 150 1.6±0.20 *1, *2
EMK316AB7106[]LHT X7R 10 μ ±10, ±20 10 150 1.6±0.20 *1, *2
LMK316 B7475[]LHT X7R 4.7 μ ±10, ±20 5 150 1.6±0.20 *1, *2
LMK316AB7106[]LHT X7R 10 μ ±10, ±20 10 150 1.6±0.20 *1, *2
JMK316AB7106[]LHT X7R 10 μ ±10, ±20 10 150 1.6±0.20 *1, *2
JMK316AB7226[]LHT X7R 22 μ ±10, ±20 10 150 1.6±0.20 *1, *2
AMK316AB7226[]LHT X7R 22 μ ±10, ±20 10 150 1.6±0.20 *1, *2
AMK316AC7476MLHT X7S 47 μ ±20 10 150 1.6±0.20 *1, *2
325TYPE (Dimension:3.2×2.5mm JIS:3225 EIA:1210)
【Temperature Characteristic BJ : X5R(-55~+85℃)】 2.5mm thickness(M)
HTLT
Rated voltage x %
UMK325 BJ106[]MHP 50 X5R 10 μ ±10, ±20 5 150 2.5±0.20 *1, *2
GMK325 BJ106[]MHP 35 X5R 10 μ ±10, ±20 5 150 2.5±0.20 *1, *2
TMK325 BJ106[]MHP 25 X5R 10 μ ±10, ±20 5 150 2.5±0.20 *1, *2
EMK325 BJ226[]MHP X5R 22 μ ±10, ±20 5 150 2.5±0.20 *1, *2
EMK325ABJ476[]MHP X5R 47 μ ±10, ±20 10 150 2.5±0.30 *1, *2
LMK325 BJ226[]MHP X5R 22 μ ±10, ±20 5 150 2.5±0.20 *1, *2
LMK325 BJ476[]MHP X5R 47 μ ±10, ±20 10 150 2.5±0.20 *1, *2
LMK325ABJ107MMHP X5R 100 μ ±20 10 150 2.5±0.30 *2
JMK325 BJ476[]MHP X5R 47 μ ±10, ±20 10 150 2.5±0.20 *1, *2
JMK325ABJ107MMHP X5R 100 μ ±20 10 150 2.5±0.30 *2
AMK325ABJ107MMHP X5R 100 μ ±20 10 150 2.5±0.30 *2
AMK325ABJ227MMHP X5R 220 μ ±20 10 150 2.5±0.30 *2
【Temperature Characteristic BJ : X5R(-55~+85℃)】 1.9mm thickness(N)
HTLT
Rated voltage x %
UMK325 BJ475[]NHT 50 X5R 4.7 μ ±10, ±20 10 150 1.9±0.20 *1, *2
GMK325 BJ225MNHT X5R 2.2 μ ±20 3.5 200 1.9±0.20 *1, *2
GMK325 BJ475[]NHT X5R 4.7 μ ±10, ±20 10 150 1.9±0.20 *1, *2
TMK325 BJ475[]NHT 25 X5R 4.7 μ ±10, ±20 10 150 1.9±0.20 *1, *2
EMK325 BJ475MNHT X5R 4.7 μ ±20 3.5 200 1.9±0.20 *1, *2
EMK325 BJ106[]NHT X5R 10 μ ±10, ±20 5 150 1.9±0.20 *1, *2
【Temperature Characteristic C6 : X6S(-55~+105℃)】 2.5mm thickness(M)
HTLT
Rated voltage x %
JMK325AC6107MMHP 6.3 X6S 100 μ ±20 10 150 2.5±0.30 *2
【Temperature Characteristic B7 : X7R(-55~+125℃)】 2.5mm thickness(M)
HTLT
Rated voltage x %
UMK325 B7225[]MHP X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.20 *1, *2
UMK325 B7335[]MHP X7R 3.3 μ ±10, ±20 3.5 200 2.5±0.20 *1, *2
UMK325 B7475[]MHP X7R 4.7 μ ±10, ±20 5 150 2.5±0.20 *1, *2
UMK325AB7106[]MHP X7R 10 μ ±10, ±20 10 150 2.5±0.30 *1, *2
GMK325AB7106[]MHP 35 X7R 10 μ ±10, ±20 10 150 2.5±0.30 *1, *2
TMK325 B7335[]MHP X7R 3.3 μ ±10, ±20 3.5 200 2.5±0.20 *1, *2
TMK325AB7106[]MHPR X7R 10 μ ±10, ±20 10 150 2.5±0.30 *1, *2
TMK325 B7226[]MHP X7R 22 μ ±10, ±20 10 150 2.5±0.20 *1, *2
EMK325 B7226[]MHP 16 X7R 22 μ ±10, ±20 10 150 2.5±0.20 *1, *2
LMK325 B7226[]MHP 10 X7R 22 μ ±10, ±20 10 150 2.5±0.20 *1, *2
JMK325 B7226[]MHPR X7R 22 μ ±10, ±20 10 150 2.5±0.20 *1, *2
JMK325 B7476[]MHPR X7R 47 μ ±10, ±20 10 150 2.5±0.20 *1, *2
6.3
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
50
25
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
35
16
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
16
10
6.3
4
25
16
10
6.3
4
Part number 1 Part number 2 Rated voltage
[V]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
50
35
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
26
PART NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.9mm thickness(N)
HTLT
Rated voltage x %
UMK325 B7105[]NHT 50 X7R 1 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
GMK325 B7225[]NHT X7R 2.2 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
GMK325 B7475[]NHTR X7R 4.7 μ ±10, ±20 10 150 1.9±0.20 *1, *2
TMK325 B7475[]NHT 25 X7R 4.7 μ ±10, ±20 10 150 1.9±0.20 *1, *2
EMK325 B7475[]NHT X7R 4.7 μ ±10, ±20 3.5 150 1.9±0.20 *1, *2
EMK325 B7106[]NHTR X7R 10 μ ±10, ±20 10 150 1.9±0.20 *1, *2
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
35
16
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
27
PART NUMBER
Multilayer Ceramic Capacitors Temperature compensating type
063TYPE (Dimension:0.6×0.3mm JIS:0603 EIA:0201)
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】 0.3mm thickness(T)
HTLT
Rated voltage x %
UMK063 CG0R5CTHF CG C0G 0.5 p ±0.25pF 410 200 0.3±0.03 *1, *2
UMK063 CG010CTHF CG C0G 1 p ±0.25pF 420 200 0.3±0.03 *1, *2
UMK063 CG1R5CTHF CG C0G 1.5 p ±0.25pF 430 200 0.3±0.03 *1, *2
UMK063 CG020CTHF CG C0G 2 p ±0.25pF 440 200 0.3±0.03 *1, *2
UMK063 CG030CTHF CG C0G 3 p ±0.25pF 460 200 0.3±0.03 *1, *2
UMK063 CG040CTHF CG C0G 4 p ±0.25pF 480 200 0.3±0.03 *1, *2
UMK063 CG050CTHF CG C0G 5 p ±0.25pF 500 200 0.3±0.03 *1, *2
UMK063 CG060DTHF CG C0G 6 p ±0.5pF 520 200 0.3±0.03 *1, *2
UMK063 CG070DTHF CG C0G 7 p ±0.5pF 540 200 0.3±0.03 *1, *2
UMK063 CG080DTHF CG C0G 8 p ±0.5pF 560 200 0.3±0.03 *1, *2
UMK063 CG090DTHF CG C0G 9 p ±0.5pF 580 200 0.3±0.03 *1, *2
UMK063 CG100DTHF CG C0G 10 p ±0.5pF 600 200 0.3±0.03 *1, *2
UMK063 CG120JTHF CG C0G 12 p ±5% 640 200 0.3±0.03 *1, *2
UMK063 CG150JTHF CG C0G 15 p ±5% 700 200 0.3±0.03 *1, *2
UMK063 CG180JTHF CG C0G 18 p ±5% 760 200 0.3±0.03 *1, *2
UMK063 CG220JTHF CG C0G 22 p ±5% 840 200 0.3±0.03 *1, *2
UMK063 CG270JTHF CG C0G 27 p ±5% 940 200 0.3±0.03 *1, *2
UMK063 CG330JTHF CG C0G 33 p ±5% 1000 200 0.3±0.03 *1, *2
UMK063 CG390JTHF CG C0G 39 p ±5% 1000 200 0.3±0.03 *1, *2
UMK063 CG470JTHF CG C0G 47 p ±5% 1000 200 0.3±0.03 *1, *2
UMK063 CG560JTHF CG C0G 56 p ±5% 1000 200 0.3±0.03 *1, *2
UMK063 CG680JTHF CG C0G 68 p ±5% 1000 200 0.3±0.03 *1, *2
UMK063 CG820JTHF CG C0G 82 p ±5% 1000 200 0.3±0.03 *1, *2
UMK063 CG101JTHF CG C0G 100 p ±5% 1000 200 0.3±0.03 *1, *2
TMK063 CG121JTHF CG C0G 120 p ±5% 1000 200 0.3±0.03 *1, *2
TMK063 CG151JTHF CG C0G 150 p ±5% 1000 200 0.3±0.03 *1, *2
TMK063 CG181JTHF CG C0G 180 p ±5% 1000 200 0.3±0.03 *1, *2
TMK063 CG221JTHF CG C0G 220 p ±5% 1000 200 0.3±0.03 *1, *2
105TYPE (Dimension:1.0×0.5mm JIS:1005 EIA:0402)
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】 0.5mm thickness(V)
HTLT
Rated voltage x %
UMK105 CG0R5CVHF CG C0G 0.5 p ±0.25pF 410 200 0.5±0.05 *1, *2
UMK105 CG010CVHF CG C0G 1 p ±0.25pF 420 200 0.5±0.05 *1, *2
UMK105 CG1R5CVHF CG C0G 1.5 p ±0.25pF 430 200 0.5±0.05 *1, *2
UMK105 CG020CVHF CG C0G 2 p ±0.25pF 440 200 0.5±0.05 *1, *2
UMK105 CG030CVHF CG C0G 3 p ±0.25pF 460 200 0.5±0.05 *1, *2
UMK105 CG040CVHF CG C0G 4 p ±0.25pF 480 200 0.5±0.05 *1, *2
UMK105 CG050CVHF CG C0G 5 p ±0.25pF 500 200 0.5±0.05 *1, *2
UMK105 CG060DVHF CG C0G 6 p ±0.5pF 520 200 0.5±0.05 *1, *2
UMK105 CG070DVHF CG C0G 7 p ±0.5pF 540 200 0.5±0.05 *1, *2
UMK105 CG080DVHF CG C0G 8 p ±0.5pF 560 200 0.5±0.05 *1, *2
UMK105 CG090DVHF CG C0G 9 p ±0.5pF 580 200 0.5±0.05 *1, *2
UMK105 CG100DVHF CG C0G 10 p ±0.5pF 600 200 0.5±0.05 *1, *2
UMK105 CG120JVHF CG C0G 12 p ±5% 640 200 0.5±0.05 *1, *2
UMK105 CG150JVHF CG C0G 15 p ±5% 700 200 0.5±0.05 *1, *2
UMK105 CG180JVHF CG C0G 18 p ±5% 760 200 0.5±0.05 *1, *2
UMK105 CG220JVHF CG C0G 22 p ±5% 840 200 0.5±0.05 *1, *2
UMK105 CG270JVHF CG C0G 27 p ±5% 940 200 0.5±0.05 *1, *2
UMK105 CG330JVHF CG C0G 33 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG390JVHF CG C0G 39 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG470JVHF CG C0G 47 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG560JVHF CG C0G 56 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG680JVHF CG C0G 68 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG820JVHF CG C0G 82 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG101JVHF CG C0G 100 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG121JVHF CG C0G 120 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG151JVHF CG C0G 150 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG181JVHF CG C0G 180 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG221JVHF CG C0G 220 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG271JVHF CG C0G 270 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG331JVHF CG C0G 330 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG391JVHF CG C0G 390 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG471JVHF CG C0G 470 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG561JVHF CG C0G 560 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG681JVHF CG C0G 680 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG821JVHF CG C0G 820 p ±5% 1000 200 0.5±0.05 *1, *2
UMK105 CG102JVHF CG C0G 1000 p ±5% 1000 200 0.5±0.05 *1, *2
50
Q
[at 1MHz]
(Min)
Thickness
*3
[mm] Note
50
25
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance
Capacitance
tolerance
Q
[at 1MHz]
(Min)
Thickness
*3
[mm] Note
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
28
PART NUMBER
Medium-High Voltage Multilayer Ceramic Capacitors
107TYPE  (Dimension:1.6×0.8mm JIS:1608 EIA:0603)
【Temperature Characteristic B7 : X7R(-55~+125℃), C7 : X7S(-55~+125℃)】 0.8mm thickness(A)
HTLT
Rated voltage x %
HMK107 B7102[]AHT X7R 1000 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7152[]AHT X7R 1500 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7222[]AHT X7R 2200 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7332[]AHT X7R 3300 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7472[]AHT X7R 4700 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7682[]AHT X7R 6800 p ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7103[]AHT X7R 0.01 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7153[]AHT X7R 0.015 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7223[]AHT X7R 0.022 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7333[]AHT X7R 0.033 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8±0.10 *1, *2
HMK107 C7224[]AHTE X7S 0.22 μ ±10, ±20 3.5 150 0.8±0.10 *1, *2
212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805)
【Temperature Characteristic B7 : X7R(-55~+125℃), C7 : X7S(-55~+125℃)】 1.25mm thickness(G)
HTLT
Rated voltage x %
HMK212 B7472[]GHT X7R 4700 p ±10, ±20 2.5 200 1.25±0.10 *1, *2
HMK212 B7682[]GHT X7R 6800 p ±10, ±20 2.5 200 1.25±0.10 *1, *2
HMK212 B7103[]GHT X7R 0.01 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
HMK212 B7153[]GHT X7R 0.015 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
HMK212 B7223[]GHT X7R 0.022 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
HMK212 B7333[]GHT X7R 0.033 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
HMK212 B7473[]GHT X7R 0.047 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
HMK212 B7683[]GHT X7R 0.068 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
HMK212 B7104[]GHT X7R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
HMK212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 200 1.25±0.10 *1, *2
HMK212 C7474[]GHTE X7S 0.47 μ ±10, ±20 3.5 150 1.25±0.10 *1, *2
HMK212BC7105[]GHTE X7S 1 μ ±10, ±20 3.5 150 1.25+0.20/-0 *1, *2
QMK212 B7472[]GHT X7R 4700 p ±10, ±20 2.5 150 1.25±0.10 *1, *2
QMK212 B7682[]GHT X7R 6800 p ±10, ±20 2.5 150 1.25±0.10 *1, *2
QMK212 B7103[]GHT X7R 0.01 μ ±10, ±20 2.5 150 1.25±0.10 *1, *2
QMK212 B7153[]GHT X7R 0.015 μ ±10, ±20 2.5 150 1.25±0.10 *1, *2
QMK212 B7223[]GHT X7R 0.022 μ ±10, ±20 2.5 150 1.25±0.10 *1, *2
【Temperature Characteristic B7 : X7R(-55~+125℃)】 0.85mm thickness(D)
HTLT
Rated voltage x %
HMK212 B7102[]DHT X7R 1000 p ±10, ±20 2.5 200 0.85±0.10 *1, *2
HMK212 B7152[]DHT X7R 1500 p ±10, ±20 2.5 200 0.85±0.10 *1, *2
HMK212 B7222[]DHT X7R 2200 p ±10, ±20 2.5 200 0.85±0.10 *1, *2
HMK212 B7332[]DHT X7R 3300 p ±10, ±20 2.5 200 0.85±0.10 *1, *2
QMK212 B7102[]DHT X7R 1000 p ±10, ±20 2.5 150 0.85±0.10 *1, *2
QMK212 B7152[]DHT X7R 1500 p ±10, ±20 2.5 150 0.85±0.10 *1, *2
QMK212 B7222[]DHT X7R 2200 p ±10, ±20 2.5 150 0.85±0.10 *1, *2
QMK212 B7332[]DHT X7R 3300 p ±10, ±20 2.5 150 0.85±0.10 *1, *2
316TYPE (Dimension:3.2×1.6mm JIS:3216 EIA:1206)
【Temperature Characteristic B7 : X7R(-55~+125℃), C7 : X7S(-55~+125℃)】 1.6mm thickness(L)
HTLT
Rated voltage x %
HMK316 B7473[]LHT X7R 0.047 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
HMK316 B7683[]LHT X7R 0.068 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
HMK316 B7104[]LHT X7R 0.1 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
HMK316 B7154[]LHT X7R 0.15 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
HMK316 B7224[]LHT X7R 0.22 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
HMK316 B7334[]LHT X7R 0.33 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
HMK316 B7474[]LHT X7R 0.47 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
HMK316 B7105[]LHT X7R 1 μ ±10, ±20 3.5 200 1.6±0.20 *1, *2
HMK316AC7225[]LHTE X7S 2.2 μ ±10, ±20 3.5 150 1.6±0.20 *1, *2
QMK316 B7223[]LHT X7R 0.022 μ ±10, ±20 2.5 150 1.6±0.20 *1, *2
QMK316 B7333[]LHT X7R 0.033 μ ±10, ±20 2.5 150 1.6±0.20 *1, *2
QMK316 B7473[]LHT X7R 0.047 μ ±10, ±20 2.5 150 1.6±0.20 *1, *2
QMK316 B7683[]LHT X7R 0.068 μ ±10, ±20 2.5 150 1.6±0.20 *1, *2
QMK316 B7104[]LHT X7R 0.1 μ ±10, ±20 2.5 150 1.6±0.20 *1, *2
SMK316 B7153[]LHT X7R 0.015 μ ±10, ±20 2.5 120 1.6±0.20 *1, *2
SMK316 B7223[]LHT X7R 0.022 μ ±10, ±20 2.5 120 1.6±0.20 *1, *2
630
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm]
250
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
100
250
Capacitance
tolerance [%]
tanδ
[%]
Part number 1 Part number 2
Note
100
tanδ
[%] Thickness
*3
[mm] Note
100
250
Capacitance
tolerance [%]
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F] Thickness
*3
[mm] Note
100
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
29
PART NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.15mm thickness(F)
HTLT
Rated voltage x %
SMK316 B7102[]FHT X7R 1000 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMK316 B7152[]FHT X7R 1500 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMK316 B7222[]FHT X7R 2200 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMK316 B7332[]FHT X7R 3300 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMK316 B7472[]FHT X7R 4700 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMK316 B7682[]FHT X7R 6800 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMK316 B7103[]FHT X7R 0.01 μ ±10, ±20 2.5 120 1.15±0.10 *1, *2
325TYPE (Dimension:3.2×2.5mm JIS:3225 EIA:1210)
【Temperature Characteristic B7 : X7R(-55~+125℃), C7 : X7S(-55~+125℃)】 2.5mm thickness(M)
HTLT
Rated voltage x %
HMK325 B7225[]MHP X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.20 *1, *2
HMK325 C7475[]MHPE X7S 4.7 μ ±10, ±20 3.5 150 2.5±0.20 *1, *2
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.9mm thickness(N)
HTLT
Rated voltage x %
HMK325 B7224[]NHT X7R 0.22 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMK325 B7474[]NHT X7R 0.47 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMK325 B7684[]NHT X7R 0.68 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMK325 B7105[]NHT X7R 1 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
QMK325 B7473[]NHT X7R 0.047 μ ±10, ±20 2.5 150 1.9±0.20 *1, *2
QMK325 B7104[]NHT X7R 0.1 μ ±10, ±20 2.5 150 1.9±0.20 *1, *2
QMK325 B7154[]NHT X7R 0.15 μ ±10, ±20 2.5 150 1.9±0.20 *1, *2
QMK325 B7224[]NHT X7R 0.22 μ ±10, ±20 2.5 150 1.9±0.20 *1, *2
SMK325 B7223[]NHT X7R 0.022 μ ±10, ±20 2.5 120 1.9±0.20 *1, *2
SMK325 B7333[]NHT X7R 0.033 μ ±10, ±20 2.5 120 1.9±0.20 *1, *2
SMK325 B7473[]NHT X7R 0.047 μ ±10, ±20 2.5 120 1.9±0.20 *1, *2
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.15mm thickness(F)
HTLT
Rated voltage x %
HMK325 B7104[]FHT 100 X7R 0.1 μ ±10, ±20 3.5 200 1.15±0.10 *1, *2
432TYPE (Dimension:4.5×3.2mm JIS:4532 EIA:1812)
【Temperature Characteristic B7 : X7R(-55~+125℃)】 2.5mm thickness(M)
HTLT
Rated voltage x %
HMK432 B7474[]MHT X7R 0.47 μ ±10, ±20 3.5 200 2.5±0.20 *1, *2
HMK432 B7105[]MHT X7R 1 μ ±10, ±20 3.5 200 2.5±0.20 *1, *2
HMK432 B7155[]MHT X7R 1.5 μ ±10, ±20 3.5 200 2.5±0.20 *1, *2
HMK432 B7225[]MHT X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.20 *1, *2
QMK432 B7104[]MHT X7R 0.1 μ ±10, ±20 2.5 150 2.5±0.20 *1, *2
QMK432 B7224[]MHT X7R 0.22 μ ±10, ±20 2.5 150 2.5±0.20 *1, *2
QMK432 B7334[]MHT X7R 0.33 μ ±10, ±20 2.5 150 2.5±0.20 *1, *2
QMK432 B7474[]MHT X7R 0.47 μ ±10, ±20 2.5 150 2.5±0.20 *1, *2
SMK432 B7473[]MHT X7R 0.047 μ ±10, ±20 2.5 120 2.5±0.20 *1, *2
SMK432 B7683[]MHT X7R 0.068 μ ±10, ±20 2.5 120 2.5±0.20 *1, *2
SMK432 B7104[]MHT X7R 0.1 μ ±10, ±20 2.5 120 2.5±0.20 *1, *2
100
250
630
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
100
250
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
100
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
630
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
tanδ
[%] Thickness
*3
[mm] Note
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
630
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
30
PART NUMBER
Medium-High Voltage Multilayer Ceramic Capacitors for High Frequency Applications
107TYPE  (Dimension:1.6×0.8mm JIS:1608 EIA:0603)
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】 0.7mm thickness(C)
HTLT
Rated voltage x %
QVS107 CG0R2[]CHT CG C0G 0.2 p ±0.05pF, ±0.1pF 804 200 0.7±0.10 *1, *2
QVS107 CG0R3[]CHT CG C0G 0.3 p ±0.05pF, ±0.1pF 806 200 0.7±0.10 *1, *2
QVS107 CG0R4[]CHT CG C0G 0.4 p ±0.05pF, ±0.1pF 808 200 0.7±0.10 *1, *2
QVS107 CG0R5[]CHT CG C0G 0.5 p ±0.1pF, ±0.25pF 810 200 0.7±0.10 *1, *2
QVS107 CG0R6[]CHT CG C0G 0.6 p ±0.1pF, ±0.25pF 812 200 0.7±0.10 *1, *2
QVS107 CG0R7[]CHT CG C0G 0.7 p ±0.1pF, ±0.25pF 814 200 0.7±0.10 *1, *2
QVS107 CGR75[]CHT CG C0G 0.75 p ±0.1pF, ±0.25pF 815 200 0.7±0.10 *1, *2
QVS107 CG0R8[]CHT CG C0G 0.8 p ±0.1pF, ±0.25pF 816 200 0.7±0.10 *1, *2
QVS107 CG0R9[]CHT CG C0G 0.9 p ±0.1pF, ±0.25pF 818 200 0.7±0.10 *1, *2
QVS107 CG010[]CHT CG C0G 1 p ±0.1pF, ±0.25pF 820 200 0.7±0.10 *1, *2
QVS107 CG1R1[]CHT CG C0G 1.1 p ±0.1pF, ±0.25pF 822 200 0.7±0.10 *1, *2
QVS107 CG1R2[]CHT CG C0G 1.2 p ±0.1pF, ±0.25pF 824 200 0.7±0.10 *1, *2
QVS107 CG1R3[]CHT CG C0G 1.3 p ±0.1pF, ±0.25pF 826 200 0.7±0.10 *1, *2
QVS107 CG1R5[]CHT CG C0G 1.5 p ±0.1pF, ±0.25pF 830 200 0.7±0.10 *1, *2
QVS107 CG1R6[]CHT CG C0G 1.6 p ±0.1pF, ±0.25pF 832 200 0.7±0.10 *1, *2
QVS107 CG1R8[]CHT CG C0G 1.8 p ±0.1pF, ±0.25pF 836 200 0.7±0.10 *1, *2
QVS107 CG020[]CHT CG C0G 2 p ±0.1pF, ±0.25pF 840 200 0.7±0.10 *1, *2
QVS107 CG2R2[]CHT CG C0G 2.2 p ±0.1pF, ±0.25pF 844 200 0.7±0.10 *1, *2
QVS107 CG2R4[]CHT CG C0G 2.4 p ±0.1pF, ±0.25pF 848 200 0.7±0.10 *1, *2
QVS107 CG2R7[]CHT CG C0G 2.7 p ±0.1pF, ±0.25pF 854 200 0.7±0.10 *1, *2
QVS107 CG030[]CHT CG C0G 3 p ±0.1pF, ±0.25pF 860 200 0.7±0.10 *1, *2
QVS107 CG3R3[]CHT CG C0G 3.3 p ±0.1pF, ±0.25pF 866 200 0.7±0.10 *1, *2
QVS107 CG3R6[]CHT CG C0G 3.6 p ±0.1pF, ±0.25pF 872 200 0.7±0.10 *1, *2
QVS107 CG3R9[]CHT CG C0G 3.9 p ±0.1pF, ±0.25pF 878 200 0.7±0.10 *1, *2
QVS107 CG4R3[]CHT CG C0G 4.3 p ±0.1pF, ±0.25pF 886 200 0.7±0.10 *1, *2
QVS107 CG4R7[]CHT CG C0G 4.7 p ±0.1pF, ±0.25pF 894 200 0.7±0.10 *1, *2
QVS107 CG5R1[]CHT CG C0G 5.1 p ±0.25pF, ±0.5pF 902 200 0.7±0.10 *1, *2
QVS107 CG5R6[]CHT CG C0G 5.6 p ±0.25pF, ±0.5pF 912 200 0.7±0.10 *1, *2
QVS107 CG6R2[]CHT CG C0G 6.2 p ±0.25pF, ±0.5pF 924 200 0.7±0.10 *1, *2
QVS107 CG6R8[]CHT CG C0G 6.8 p ±0.25pF, ±0.5pF 936 200 0.7±0.10 *1, *2
QVS107 CG7R5[]CHT CG C0G 7.5 p ±0.25pF, ±0.5pF 950 200 0.7±0.10 *1, *2
QVS107 CG8R2[]CHT CG C0G 8.2 p ±0.25pF, ±0.5pF 964 200 0.7±0.10 *1, *2
QVS107 CG9R1[]CHT CG C0G 9.1 p ±0.25pF, ±0.5pF 982 200 0.7±0.10 *1, *2
QVS107 CG100[]CHT CG C0G 10 p ±2%, ±5% 1000 200 0.7±0.10 *1, *2
QVS107 CG110JCHT CG C0G 11 p ±5% 1020 200 0.7±0.10 *1, *2
QVS107 CG120JCHT CG C0G 12 p ±5% 1040 200 0.7±0.10 *1, *2
QVS107 CG130JCHT CG C0G 13 p ±5% 1060 200 0.7±0.10 *1, *2
QVS107 CG150JCHT CG C0G 15 p ±5% 1100 200 0.7±0.10 *1, *2
QVS107 CG160JCHT CG C0G 16 p ±5% 1120 200 0.7±0.10 *1, *2
QVS107 CG180JCHT CG C0G 18 p ±5% 1160 200 0.7±0.10 *1, *2
QVS107 CG200JCHT CG C0G 20 p ±5% 1200 200 0.7±0.10 *1, *2
QVS107 CG220JCHT CG C0G 22 p ±5% 1240 200 0.7±0.10 *1, *2
QVS107 CG240JCHT CG C0G 24 p ±5% 1280 200 0.7±0.10 *1, *2
QVS107 CG270JCHT CG C0G 27 p ±5% 1340 200 0.7±0.10 *1, *2
QVS107 CG300JCHT CG C0G 30 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG330JCHT CG C0G 33 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG360JCHT CG C0G 36 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG390JCHT CG C0G 39 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG430JCHT CG C0G 43 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG470JCHT CG C0G 47 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG510JCHT CG C0G 51 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG560JCHT CG C0G 56 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG620JCHT CG C0G 62 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG680JCHT CG C0G 68 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG750JCHT CG C0G 75 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG820JCHT CG C0G 82 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG910JCHT CG C0G 91 p ±5% 1400 200 0.7±0.10 *1, *2
QVS107 CG101JCHT CG C0G 100 p ±5% 1400 200 0.7±0.10 *1, *2
Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance
Q
[at 1MHz]
(Min)
Thickness
*3
[mm] Note
250
Part number 1
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
31
PART NUMBER
212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805)
【Temperature Characteristic CG : CG/C0G(-55~+125℃)】 0.85mm thickness(D)
HTLT
Rated voltage x %
QVS212 CG0R3[]DHT CG C0G 0.3 p ±0.1pF, ±0.25pF 806 200 0.85±0.10 *1, *2
QVS212 CG0R4[]DHT CG C0G 0.4 p ±0.1pF, ±0.25pF 808 200 0.85±0.10 *1, *2
QVS212 CG0R5[]DHT CG C0G 0.5 p ±0.1pF, ±0.25pF 810 200 0.85±0.10 *1, *2
QVS212 CG0R6[]DHT CG C0G 0.6 p ±0.1pF, ±0.25pF 812 200 0.85±0.10 *1, *2
QVS212 CG0R7[]DHT CG C0G 0.7 p ±0.1pF, ±0.25pF 814 200 0.85±0.10 *1, *2
QVS212 CGR75[]DHT CG C0G 0.75 p ±0.1pF, ±0.25pF 815 200 0.85±0.10 *1, *2
QVS212 CG0R8[]DHT CG C0G 0.8 p ±0.1pF, ±0.25pF 816 200 0.85±0.10 *1, *2
QVS212 CG0R9[]DHT CG C0G 0.9 p ±0.1pF, ±0.25pF 818 200 0.85±0.10 *1, *2
QVS212 CG010[]DHT CG C0G 1 p ±0.1pF, ±0.25pF 820 200 0.85±0.10 *1, *2
QVS212 CG1R1[]DHT CG C0G 1.1 p ±0.1pF, ±0.25pF 822 200 0.85±0.10 *1, *2
QVS212 CG1R2[]DHT CG C0G 1.2 p ±0.1pF, ±0.25pF 824 200 0.85±0.10 *1, *2
QVS212 CG1R3[]DHT CG C0G 1.3 p ±0.1pF, ±0.25pF 826 200 0.85±0.10 *1, *2
QVS212 CG1R5[]DHT CG C0G 1.5 p ±0.1pF, ±0.25pF 830 200 0.85±0.10 *1, *2
QVS212 CG1R6[]DHT CG C0G 1.6 p ±0.1pF, ±0.25pF 832 200 0.85±0.10 *1, *2
QVS212 CG1R8[]DHT CG C0G 1.8 p ±0.1pF, ±0.25pF 836 200 0.85±0.10 *1, *2
QVS212 CG020[]DHT CG C0G 2 p ±0.1pF, ±0.25pF 840 200 0.85±0.10 *1, *2
QVS212 CG2R2[]DHT CG C0G 2.2 p ±0.1pF, ±0.25pF 844 200 0.85±0.10 *1, *2
QVS212 CG2R4[]DHT CG C0G 2.4 p ±0.1pF, ±0.25pF 848 200 0.85±0.10 *1, *2
QVS212 CG2R7[]DHT CG C0G 2.7 p ±0.1pF, ±0.25pF 854 200 0.85±0.10 *1, *2
QVS212 CG030[]DHT CG C0G 3 p ±0.1pF, ±0.25pF 860 200 0.85±0.10 *1, *2
QVS212 CG3R3[]DHT CG C0G 3.3 p ±0.1pF, ±0.25pF 866 200 0.85±0.10 *1, *2
QVS212 CG3R6[]DHT CG C0G 3.6 p ±0.1pF, ±0.25pF 872 200 0.85±0.10 *1, *2
QVS212 CG3R9[]DHT CG C0G 3.9 p ±0.1pF, ±0.25pF 878 200 0.85±0.10 *1, *2
QVS212 CG4R3[]DHT CG C0G 4.3 p ±0.1pF, ±0.25pF 886 200 0.85±0.10 *1, *2
QVS212 CG4R7[]DHT CG C0G 4.7 p ±0.1pF, ±0.25pF 894 200 0.85±0.10 *1, *2
QVS212 CG5R1[]DHT CG C0G 5.1 p ±0.25pF, ±0.5pF 902 200 0.85±0.10 *1, *2
QVS212 CG5R6[]DHT CG C0G 5.6 p ±0.25pF, ±0.5pF 912 200 0.85±0.10 *1, *2
QVS212 CG6R2[]DHT CG C0G 6.2 p ±0.25pF, ±0.5pF 924 200 0.85±0.10 *1, *2
QVS212 CG6R8[]DHT CG C0G 6.8 p ±0.25pF, ±0.5pF 936 200 0.85±0.10 *1, *2
QVS212 CG7R5[]DHT CG C0G 7.5 p ±0.25pF, ±0.5pF 950 200 0.85±0.10 *1, *2
QVS212 CG8R2[]DHT CG C0G 8.2 p ±0.25pF, ±0.5pF 964 200 0.85±0.10 *1, *2
QVS212 CG9R1[]DHT CG C0G 9.1 p ±0.25pF, ±0.5pF 982 200 0.85±0.10 *1, *2
QVS212 CG100JDHT CG C0G 10 p ±5% 1000 200 0.85±0.10 *1, *2
QVS212 CG110JDHT CG C0G 11 p ±5% 1020 200 0.85±0.10 *1, *2
QVS212 CG120JDHT CG C0G 12 p ±5% 1040 200 0.85±0.10 *1, *2
QVS212 CG130JDHT CG C0G 13 p ±5% 1060 200 0.85±0.10 *1, *2
QVS212 CG150JDHT CG C0G 15 p ±5% 1100 200 0.85±0.10 *1, *2
QVS212 CG160JDHT CG C0G 16 p ±5% 1120 200 0.85±0.10 *1, *2
QVS212 CG180JDHT CG C0G 18 p ±5% 1160 200 0.85±0.10 *1, *2
QVS212 CG200JDHT CG C0G 20 p ±5% 1200 200 0.85±0.10 *1, *2
QVS212 CG220JDHT CG C0G 22 p ±5% 1240 200 0.85±0.10 *1, *2
QVS212 CG240JDHT CG C0G 24 p ±5% 1280 200 0.85±0.10 *1, *2
QVS212 CG270JDHT CG C0G 27 p ±5% 1340 200 0.85±0.10 *1, *2
QVS212 CG300JDHT CG C0G 30 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG330JDHT CG C0G 33 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG360JDHT CG C0G 36 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG390JDHT CG C0G 39 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG430JDHT CG C0G 43 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG470JDHT CG C0G 47 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG510JDHT CG C0G 51 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG560JDHT CG C0G 56 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG620JDHT CG C0G 62 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG680JDHT CG C0G 68 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG750JDHT CG C0G 75 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG820JDHT CG C0G 82 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG910JDHT CG C0G 91 p ±5% 1400 200 0.85±0.10 *1, *2
QVS212 CG101JDHT CG C0G 100 p ±5% 1400 200 0.85±0.10 *1, *2
Q
[at 1MHz]
(Min)
Thickness
*3
[mm] Note
250
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
32
PART NUMBER
Soft Termination Multilayer Ceramic Capacitors
107TYPE  (Dimension:1.6×0.8mm JIS:1608 EIA:0603)
【Temperature Characteristic B7 : X7R(-55~+125℃)】 0.8mm thickness(A)
HTLT
Rated voltage x %
TMJ107BB7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
TMJ107BB7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
TMJ107BB7224[]AHT X7R 0.22 μ ±10, ±20 10 150 0.8+0.20/-0 *1, *2
TMJ107BB7474[]AHT X7R 0.47 μ ±10, ±20 10 150 0.8+0.20/-0 *1, *2
TMJ107CB7105[]AHR X7R 1 μ ±10, ±20 10 150 0.8+0.25/-0 *1, *2
GMJ107BB7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
GMJ107BB7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
GMJ107BB7224[]AHT X7R 0.22 μ ±10, ±20 10 150 0.8+0.20/-0 *1, *2
GMJ107BB7474[]AHT X7R 0.47 μ ±10, ±20 10 150 0.8+0.20/-0 *1, *2
GMJ107CB7105[]AHR X7R 1 μ ±10, ±20 10 150 0.8+0.25/-0 *1, *2
UMJ107AB7102[]AHT X7R 1000 p ±10, ±20 3.5 200 0.8+0.15/-0.05 *1, *2
UMJ107AB7222[]AHT X7R 2200 p ±10, ±20 3.5 200 0.8+0.15/-0.05 *1, *2
UMJ107BB7472[]AHT X7R 4700 p ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
UMJ107BB7103[]AHT X7R 0.01 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
UMJ107BB7223[]AHT X7R 0.022 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
UMJ107BB7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
UMJ107BB7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
HMJ107AB7102[]AHT X7R 1000 p ±10, ±20 3.5 200 0.8+0.15/-0.05 *1, *2
HMJ107AB7222[]AHT X7R 2200 p ±10, ±20 3.5 200 0.8+0.15/-0.05 *1, *2
HMJ107BB7472[]AHT X7R 4700 p ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
HMJ107BB7103[]AHT X7R 0.01 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
HMJ107BB7223[]AHT X7R 0.022 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
HMJ107BB7473[]AHT X7R 0.047 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
HMJ107BB7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8+0.20/-0 *1, *2
212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805)
【Temperature Characteristic B7 : X7R(-55~+125℃), C7 : X7S(-55~+125℃)】 0.85mm thickness(D)、1.25mm thickness(G)
HTLT
Rated voltage x %
JMJ212CB7106[]GHT 6.3 X7R 10 μ ±10, ±20 10 150 1.25+0.25/-0 *1, *2
EMJ212CB7225[]GHT X7R 2.2 μ ±10, ±20 10 150 1.25+0.25/-0 *1, *2
EMJ212CB7475[]GHT X7R 4.7 μ ±10, ±20 10 150 1.25+0.25/-0 *1, *2
TMJ212CB7225[]GHT 25 X7R 2.2 μ ±10, ±20 10 150 1.25+0.25/-0 *1, *2
GMJ212CB7105[]GHT 35 X7R 1 μ ±10, ±20 10 150 1.25+0.25/-0 *1, *2
UMJ212BB7103[]GHT X7R 0.01 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
UMJ212BB7223[]GHT X7R 0.022 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
UMJ212BB7473[]GHT X7R 0.047 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
UMJ212BB7104[]GHT X7R 0.1 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
UMJ212BB7224[]GHT X7R 0.22 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
UMJ212CC7474[]GHTE X7S 0.47 μ ±10, ±20 3.5 150 1.25+0.25/-0 *1, *2
UMJ212CB7105[]GHT X7R 1 μ ±10, ±20 10 150 1.25+0.25/-0 *1, *2
HMJ212KB7102[]DHT X7R 1000 p ±10, ±20 3.5 200 0.85±0.15 *1, *2
HMJ212KB7222[]DHT X7R 2200 p ±10, ±20 3.5 200 0.85±0.15 *1, *2
HMJ212BB7472[]GHT X7R 4700 p ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
HMJ212BB7103[]GHT X7R 0.01 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
HMJ212BB7223[]GHT X7R 0.022 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
HMJ212BB7473[]GHT X7R 0.047 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
HMJ212BB7104[]GHT X7R 0.1 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
HMJ212BB7224[]GHT X7R 0.22 μ ±10, ±20 3.5 200 1.25+0.20/-0 *1, *2
HMJ212CC7474[]GHTE X7S 0.47 μ ±10, ±20 3.5 150 1.25+0.25/-0 *1, *2
QMJ212KB7102[]DHT X7R 1000 p ±10, ±20 2.5 150 0.85±0.15 *1, *2
QMJ212KB7222[]DHT X7R 2200 p ±10, ±20 2.5 150 0.85±0.15 *1, *2
QMJ212BB7472[]GHT X7R 4700 p ±10, ±20 2.5 150 1.25+0.20/-0 *1, *2
QMJ212BB7103[]GHT X7R 0.01 μ ±10, ±20 2.5 150 1.25+0.20/-0 *1, *2
QMJ212BB7223[]GHT X7R 0.022 μ ±10, ±20 2.5 150 1.25+0.20/-0 *1, *2
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
100
250
35
50
Note
16
50
100
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm]
tanδ
[%] Thickness
*3
[mm] Note
25
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
33
PART NUMBER
316TYPE (Dimension:3.2×1.6mm JIS:3216 EIA:1206)
【Temperature Characteristic B7 : X7R(-55~+125℃), C7 : X7S(-55~+125℃)】 1.15mm thickness(F)、1.6mm thickness(L)
HTLT
Rated voltage x %
LMJ316BB7226[]LHT 10 X7R 22 μ ±10, ±20 10 150 1.6±0.30 *1, *2
EMJ316BB7475[]LHT X7R 4.7 μ ±10, ±20 10 150 1.6±0.30 *1, *2
EMJ316BB7106[]LHT X7R 10 μ ±10, ±20 10 150 1.6±0.30 *1, *2
TMJ316BB7474[]LHT X7R 0.47 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
TMJ316BB7475[]LHT X7R 4.7 μ ±10, ±20 10 150 1.6±0.30 *1, *2
TMJ316BB7106[]LHT X7R 10 μ ±10, ±20 10 150 1.6±0.30 *1, *2
GMJ316BB7474[]LHT X7R 0.47 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
GMJ316AB7225[]LHT X7R 2.2 μ ±10, ±20 10 150 1.6±0.20 *1, *2
GMJ316BB7475[]LHT X7R 4.7 μ ±10, ±20 10 150 1.6±0.30 *1, *2
GMJ316BB7106[]LHT X7R 10 μ ±10, ±20 10 150 1.6±0.30 *1, *2
UMJ316BB7473[]LHT X7R 0.047 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
UMJ316BB7104[]LHT X7R 0.1 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
UMJ316BB7224[]LHT X7R 0.22 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
UMJ316BB7474[]LHT X7R 0.47 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
UMJ316BB7105[]LHT X7R 1 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
UMJ316AB7225[]LHT X7R 2.2 μ ±10, ±20 10 150 1.6±0.20 *1, *2
UMJ316BC7475[]LHTE X7S 4.7 μ ±10, ±20 2.5 150 1.6±0.30 *1, *2
HMJ316 B7102[]FHT X7R 1000 p ±10, ±20 3.5 200 1.15±0.10 *1, *2
HMJ316 B7222[]FHT X7R 2200 p ±10, ±20 3.5 200 1.15±0.10 *1, *2
HMJ316 B7472[]FHT X7R 4700 p ±10, ±20 3.5 200 1.15±0.10 *1, *2
HMJ316KB7103[]FHT X7R 0.01 μ ±10, ±20 3.5 200 1.15±0.20 *1, *2
HMJ316BB7223[]LHT X7R 0.022 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
HMJ316BB7473[]LHT X7R 0.047 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
HMJ316BB7104[]LHT X7R 0.1 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
HMJ316BB7224[]LHT X7R 0.22 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
HMJ316BB7474[]LHT X7R 0.47 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
HMJ316BB7105[]LHT X7R 1 μ ±10, ±20 3.5 200 1.6±0.30 *1, *2
HMJ316BC7225[]LHTE X7S 2.2 μ ±10, ±20 3.5 150 1.6±0.30 *1, *2
QMJ316 B7102[]FHT X7R 1000 p ±10, ±20 2.5 150 1.15±0.10 *1, *2
QMJ316 B7222[]FHT X7R 2200 p ±10, ±20 2.5 150 1.15±0.10 *1, *2
QMJ316 B7472[]FHT X7R 4700 p ±10, ±20 2.5 150 1.15±0.10 *1, *2
QMJ316KB7103[]FHT X7R 0.01 μ ±10, ±20 2.5 150 1.15±0.20 *1, *2
QMJ316BB7223[]LHT X7R 0.022 μ ±10, ±20 2.5 150 1.6±0.30 *1, *2
QMJ316BB7473[]LHT X7R 0.047 μ ±10, ±20 2.5 150 1.6±0.30 *1, *2
QMJ316BB7104[]LHT X7R 0.1 μ ±10, ±20 2.5 150 1.6±0.30 *1, *2
SMJ316 B7102[]FHT X7R 1000 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMJ316 B7222[]FHT X7R 2200 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMJ316 B7472[]FHT X7R 4700 p ±10, ±20 2.5 120 1.15±0.10 *1, *2
SMJ316KB7103[]FHT X7R 0.01 μ ±10, ±20 2.5 120 1.15±0.20 *1, *2
SMJ316BB7223[]LHT X7R 0.022 μ ±10, ±20 2.5 120 1.6±0.30 *1, *2
325TYPE (Dimension:3.2×2.5mm JIS:3225 EIA:1210)
【Temperature Characteristic B7 : X7R(-55~+125℃), C7 : X7S(-55~+125℃)】 1.9mm thickness(N)、2.5mm thickness(M)
HTLT
Rated voltage x %
JMJ325KB7476[]MHP 6.3 X7R 47 μ ±10, ±20 10 150 2.5±0.30 *1, *2
EMJ325KB7226[]MHP 16 X7R 22 μ ±10, ±20 10 150 2.5±0.30 *1, *2
TMJ325AB7475[]MHP X7R 4.7 μ ±10, ±20 5 150 2.5±0.30 *1, *2
TMJ325KB7106[]MHP X7R 10 μ ±10, ±20 10 150 2.5±0.30 *1, *2
GMJ325AB7475[]MHP X7R 4.7 μ ±10, ±20 5 150 2.5±0.30 *1, *2
GMJ325KB7106[]MHP X7R 10 μ ±10, ±20 10 150 2.5±0.30 *1, *2
UMJ325AB7225[]MHP X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.30 *1, *2
UMJ325AB7475[]MHP X7R 4.7 μ ±10, ±20 5 150 2.5±0.30 *1, *2
UMJ325KB7106[]MHP X7R 10 μ ±10, ±20 10 150 2.5±0.30 *1, *2
HMJ325 B7223[]NHT X7R 0.022 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMJ325 B7473[]NHT X7R 0.047 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMJ325 B7104[]NHT X7R 0.1 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMJ325 B7224[]NHT X7R 0.22 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMJ325 B7474[]NHT X7R 0.47 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMJ325 B7105[]NHT X7R 1 μ ±10, ±20 3.5 200 1.9±0.20 *1, *2
HMJ325AB7225[]MHP X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.30 *1, *2
HMJ325KC7475[]MHPE X7S 4.7 μ ±10, ±20 3.5 150 2.5±0.30 *1, *2
QMJ325 B7223[]NHT X7R 0.022 μ ±10, ±20 2.5 150 1.9±0.20 *1, *2
QMJ325 B7473[]NHT X7R 0.047 μ ±10, ±20 2.5 150 1.9±0.20 *1, *2
QMJ325 B7104[]NHT X7R 0.1 μ ±10, ±20 2.5 150 1.9±0.20 *1, *2
QMJ325 B7224[]NHT X7R 0.22 μ ±10, ±20 2.5 150 1.9±0.20 *1, *2
SMJ325 B7223[]NHT X7R 0.022 μ ±10, ±20 2.5 120 1.9±0.20 *1, *2
SMJ325 B7473[]NHT X7R 0.047 μ ±10, ±20 2.5 120 1.9±0.20 *1, *2
Part number 1 Part number 2 Rated voltage
[V]
25
35
50
100
250
630
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
16
25
35
50
tanδ
[%] Thickness
*3
[mm] Note
100
250
630
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
34
PART NUMBER
LW Reversal Decoupling Capacitors (LWDC
TM
)
105TYPE (Dimension:0.52×1.0mm JIS:0510 EIA:0204)
【Temperature Characteristic BJ : X5R(-55~+85℃)】 0.3mm thickness(P)
HTLT
Rated voltage x %
TWK105 BJ104MPHF 25 X5R 0.1 μ ±20 5 150 0.3±0.05 *1, *2
EWK105 BJ224MPHF 16 X5R 0.22 μ ±20 10 150 0.3±0.05 *1, *2
LWK105 BJ474MPHF 10 X5R 0.47 μ ±20 10 150 0.3±0.05 *1, *2
AWK105 BJ105MPHF 4 X5R 1 μ ±20 10 150 0.3±0.05 *1, *2
【Temperature Characteristic C6 : X6S(-55~+105℃), C7 : X7S(-55~+125℃】 0.3mm thickness(P)
HTLT
Rated voltage x %
EWK105 C6104MPHF 16 X6S 0.1 μ ±20 5 150 0.3±0.05 *1, *2
LWK105 C7104MPHF X7S 0.1 μ ±20 5 150 0.3±0.05 *1, *2
LWK105 C6224MPHF X6S 0.22 μ ±20 10 150 0.3±0.05 *1, *2
JWK105 C7104MPHF X7S 0.1 μ ±20 5 150 0.3±0.05 *1, *2
JWK105 C7224MPHF X7S 0.22 μ ±20 10 150 0.3±0.05 *1, *2
JWK105 C6474MPHF X6S 0.47 μ ±20 10 150 0.3±0.05 *1, *2
AWK105 C7224MPHF X7S 0.22 μ ±20 10 150 0.3±0.05 *1, *2
AWK105 C6474MPHF X6S 0.47 μ ±20 10 150 0.3±0.05 *1, *2
107TYPE (Dimension:0.8×1.6mm JIS:0816 EIA:0306)
【Temperature Characteristic BJ : X5R(-55~+85℃)】 0.5mm thickness(V)
HTLT
Rated voltage x %
LWK107 BJ105MVHT 10 X5R 1 μ ±20 10 150 0.5±0.05 *1, *2
JWK107 BJ225MVHT X5R 2.2 μ ±20 10 150 0.5±0.05 *1, *2
JWK107 BJ475MVHT X5R 4.7 μ ±20 10 150 0.5±0.05 *1, *2
【Temperature Characteristic B7 : X7R(-55~+125℃), C6 : X6S(-55~+105℃), C7 : X7S(-55~+125℃)】 0.5mm thickness(V)
HTLT
Rated voltage x %
TWK107 B7104MVHT 25 X7R 0.1 μ ±20 5 150 0.5±0.05 *1, *2
EWK107 B7224MVHT X7R 0.22 μ ±20 5 150 0.5±0.05 *1, *2
EWK107 B7474MVHT X7R 0.47 μ ±20 5 150 0.5±0.05 *1, *2
LWK107 B7474MVHT 10 X7R 0.47 μ ±20 5 150 0.5±0.05 *1, *2
JWK107 C7105MVHT 6.3 X7S 1 μ ±20 10 150 0.5±0.05 *1, *2
AWK107 C6225MVHT X6S 2.2 μ ±20 10 150 0.5±0.05 *1, *2
AWK107 C6475MVHT X6S 4.7 μ ±20 10 150 0.5±0.05 *1, *2
212TYPE (Dimension:1.25×2.0mm JIS:1220 EIA:0508)
【Temperature Characteristic BJ : X5R(-55~+85℃)】 0.85mm thickness(D)
HTLT
Rated voltage x %
LWK212 BJ475[]DHT 10 X5R 4.7 μ ±10, ±20 10 150 0.85±0.10 *1, *2
JWK212 BJ106MDHT 6.3 X5R 10 μ ±20 10 150 0.85±0.10 *1, *2
AWK212 BJ226MDHT 4 X5R 22 μ ±20 10 150 0.85±0.10 *1, *2
【Temperature Characteristic C6 : X6S(-55~+105℃)】 0.85mm thickness(D)
HTLT
Rated voltage x %
JWK212 C6475[]DHT 6.3 X6S 4.7 μ ±10, ±20 10 150 0.85±0.10 *1, *2
Thickness
*3
[mm] NotePart number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%]
Thickness
*3
[mm] Note
6.3
tanδ
[%] Thickness
*3
[mm] Note
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
16
4
Capacitance
tolerance [%]
10
6.3
4
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
tanδ
[%]
tanδ
[%] Thickness
*3
[mm] Note
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%]
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
Thickness
*3
[mm] Note
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
35
PART NUMBER
・ All the Multilayer Ceramic Capacitors of the catalog lineup
are RoHS compliant.
・ Capacitance tolerance code is applied to [] of part number.
・ All the Multilayer Ceramic Capacitors in the catalog lineup
are applicable for reflow-soldering.
Note)
・ The exchange of individual specifications is necessary depe
nding on the application and circuit condition. Please contact Taiyo Yuden sales channels.
・ *1: Automotive (AEC-Q200 Qualified) products for POWERTRAIN
, and SAFETY. Please check ”Automotive Application Guide” for further details before using the products.
  <         :AEC-Q200 qualified>
     All the Multilayer Ceramic Capacitors of *1 marks are test
ed based on the test conditions and methods defined in AEC-Q200 family item.
     125℃ products: AEC-Q200 Grade1 (we conduct the evaluation
at the test condition of Grade1.)
     Please consult with TAIYO YUDEN’s official sales channel f
or the details of the product specification and AEC-Q200 test results, etc.,
     and please review and approve TAIYO YUDEN's product specif
ication before ordering.
・ *3: For standard case size, please kindly refer to ④Dimensi
on, ⑤Dimension tolerance, ⑨Thickness and STANDARD EXTERNAL DIMENSIONS.
High Reliability Application Multilayer Ceramic Capacitors
105TYPE (Demension:1.0×0.5mm JIS:1005 EIA:0402)
【Temperature Characteristic B7 : X7R(-55~+125℃)】 0.5mm thickness(V)
HTLT
Rated voltage x %
UMF105 B7102[]VHF X7R 1000 p ±10, ±20 2.5 200 0.5±0.05 *1
UMF105 B7222[]VHF X7R 2200 p ±10, ±20 2.5 200 0.5±0.05 *1
UMF105 B7472[]VHF X7R 4700 p ±10, ±20 2.5 150 0.5±0.05 *1
UMF105 B7103[]VHF X7R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1
TMF105 B7102[]VHF X7R 1000 p ±10, ±20 2.5 200 0.5±0.05 *1
TMF105 B7222[]VHF X7R 2200 p ±10, ±20 2.5 200 0.5±0.05 *1
TMF105 B7472[]VHF X7R 4700 p ±10, ±20 2.5 200 0.5±0.05 *1
TMF105 B7103[]VHF X7R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1
TMF105 B7223[]VHF X7R 0.022 μ ±10, ±20 3.5 150 0.5±0.05 *1
TMF105 B7473[]VHF X7R 0.047 μ ±10, ±20 3.5 150 0.5±0.05 *1
EMF105 B7102[]VHF X7R 1000 p ±10, ±20 2.5 200 0.5±0.05 *1
EMF105 B7222[]VHF X7R 2200 p ±10, ±20 2.5 200 0.5±0.05 *1
EMF105 B7472[]VHF X7R 4700 p ±10, ±20 2.5 200 0.5±0.05 *1
EMF105 B7103[]VHF X7R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1
EMF105 B7223[]VHF X7R 0.022 μ ±10, ±20 3.5 200 0.5±0.05 *1
EMF105 B7473[]VHF X7R 0.047 μ ±10, ±20 3.5 200 0.5±0.05 *1
EMF105 B7104[]VHF X7R 0.1 μ ±10, ±20 5 150 0.5±0.05 *1
LMF105 B7102[]VHF X7R 1000 p ±10, ±20 2.5 200 0.5±0.05 *1
LMF105 B7222[]VHF X7R 2200 p ±10, ±20 2.5 200 0.5±0.05 *1
LMF105 B7472[]VHF X7R 4700 p ±10, ±20 2.5 200 0.5±0.05 *1
LMF105 B7103[]VHF X7R 0.01 μ ±10, ±20 3.5 200 0.5±0.05 *1
LMF105 B7223[]VHF X7R 0.022 μ ±10, ±20 3.5 200 0.5±0.05 *1
LMF105 B7473[]VHF X7R 0.047 μ ±10, ±20 3.5 200 0.5±0.05 *1
LMF105 B7104[]VHF X7R 0.1 μ ±10, ±20 5 200 0.5±0.05 *1
107TYPE (Dimension:1.6×0.8mm JIS:1608 EIA:0603)
【Temperature Characteristic B7 : X7R(-55~+125℃)】 0.8mm thickness(A)
HTLT
Rated voltage x %
UMF107 B7223[]AHT X7R 0.022 μ ±10, ±20 3.5 200 0.8±0.10 *1
UMF107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8±0.10 *1
TMF107 B7223[]AHT X7R 0.022 μ ±10, ±20 3.5 200 0.8±0.10 *1
TMF107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8±0.10 *1
EMF107 B7223[]AHT X7R 0.022 μ ±10, ±20 3.5 200 0.8±0.10 *1
EMF107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8±0.10 *1
EMF107 B7105[]AHT X7R 1 μ ±10, ±20 10 150 0.8±0.10 *1
LMF107 B7223[]AHT X7R 0.022 μ ±10, ±20 3.5 200 0.8±0.10 *1
LMF107 B7104[]AHT X7R 0.1 μ ±10, ±20 3.5 200 0.8±0.10 *1
LMF107 B7105[]AHT X7R 1 μ ±10, ±20 10 150 0.8±0.10 *1
16
10
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
50
25
Note
50
25
16
10
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm]
AEC-Q200
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
36
PART NUMBER
212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805)
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.25mm thickness(G)
HTLT
Rated voltage x %
HMF212 B7103[]GHT X7R 0.01 μ ±10, ±20 3.5 200 1.25±0.10 *1
HMF212 B7223[]GHT X7R 0.022 μ ±10, ±20 3.5 200 1.25±0.10 *1
UMF212 B7103[]GHT X7R 0.01 μ ±10, ±20 3.5 200 1.25±0.10 *1
UMF212 B7223[]GHT X7R 0.022 μ ±10, ±20 3.5 200 1.25±0.10 *1
UMF212 B7473[]GHT X7R 0.047 μ ±10, ±20 3.5 200 1.25±0.10 *1
UMF212 B7104[]GHT X7R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1
UMF212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 200 1.25±0.10 *1
UMF212 B7105[]GHT X7R 1 μ ±10, ±20 10 150 1.25±0.10 *1
TMF212 B7103[]GHT X7R 0.01 μ ±10, ±20 3.5 200 1.25±0.10 *1
TMF212 B7223[]GHT X7R 0.022 μ ±10, ±20 3.5 200 1.25±0.10 *1
TMF212 B7473[]GHT X7R 0.047 μ ±10, ±20 3.5 200 1.25±0.10 *1
TMF212 B7104[]GHT X7R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1
TMF212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 200 1.25±0.10 *1
TMF212 B7105[]GHT X7R 1 μ ±10, ±20 10 200 1.25±0.10 *1
EMF212 B7473[]GHT X7R 0.047 μ ±10, ±20 3.5 200 1.25±0.10 *1
EMF212 B7104[]GHT X7R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1
EMF212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 200 1.25±0.10 *1
EMF212 B7105[]GHT X7R 1 μ ±10, ±20 10 200 1.25±0.10 *1
EMF212AB7475[]GHT X7R 4.7 μ ±10, ±20 10 150 1.25+0.15/-0.05 *1
LMF212 B7473[]GHT X7R 0.047 μ ±10, ±20 3.5 200 1.25±0.10 *1
LMF212 B7104[]GHT X7R 0.1 μ ±10, ±20 3.5 200 1.25±0.10 *1
LMF212 B7224[]GHT X7R 0.22 μ ±10, ±20 3.5 200 1.25±0.10 *1
LMF212 B7105[]GHT X7R 1 μ ±10, ±20 10 200 1.25±0.10 *1
LMF212 B7475[]GHT X7R 4.7 μ ±10, ±20 10 150 1.25±0.10 *1
316TYPE (Dimension:3.2×1.6mm JIS:3216 EIA:1206)
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.15mm thickness(F)
HTLT
Rated voltage x %
HMF316 B7102[]FHT X7R 1000 p ±10, ±20 2.5 200 1.15±0.10 *1
HMF316 B7222[]FHT X7R 2200 p ±10, ±20 2.5 200 1.15±0.10 *1
HMF316 B7472[]FHT X7R 4700 p ±10, ±20 2.5 200 1.15±0.10 *1
HMF316 B7103[]FHT X7R 0.01 μ ±10, ±20 2.5 200 1.15±0.10 *1
UMF316 B7102[]FHT X7R 1000 p ±10, ±20 2.5 200 1.15±0.10 *1
UMF316 B7222[]FHT X7R 2200 p ±10, ±20 2.5 200 1.15±0.10 *1
UMF316 B7472[]FHT X7R 4700 p ±10, ±20 2.5 200 1.15±0.10 *1
UMF316 B7103[]FHT X7R 0.01 μ ±10, ±20 2.5 200 1.15±0.10 *1
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.6mm thickness(L)
HTLT
Rated voltage x %
HMF316 B7104[]LHT 100 X7R 0.1 μ ±10, ±20 3.5 200 1.6±0.20 *1
UMF316 B7104[]LHT X7R 0.1 μ ±10, ±20 3.5 200 1.6±0.20 *1
UMF316 B7105[]LHT X7R 1 μ ±10, ±20 3.5 150 1.6±0.20 *1
TMF316 B7104[]LHT X7R 0.1 μ ±10, ±20 3.5 200 1.6±0.20 *1
TMF316AB7475[]LHT X7R 4.7 μ ±10, ±20 10 150 1.6±0.20 *1
EMF316AB7106[]LHT 16 X7R 10 μ ±10, ±20 10 150 1.6±0.20 *1
JMF316AB7106[]LHT 6.3 X7R 10 μ ±10, ±20 10 200 1.6±0.20 *1
325TYPE (Dimension:3.2×2.5mm JIS:3225 EIA:1210)
【Temperature Characteristic B7 : X7R(-55~+125℃)】 2.5mm thickness(M)
HTLT
Rated voltage x %
HMF325 B7225[]MHP 100 X7R 2.2 μ ±10, ±20 3.5 150 2.5±0.20 *1
UMF325 B7225[]MHP X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.20 *1
UMF325 B7475[]MHP X7R 4.7 μ ±10, ±20 5 150 2.5±0.20 *1
TMF325 B7225[]MHP X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.20 *1
TMF325 B7475[]MHP X7R 4.7 μ ±10, ±20 5 200 2.5±0.20 *1
EMF325 B7225[]MHP X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.20 *1
EMF325 B7475[]MHP X7R 4.7 μ ±10, ±20 5 200 2.5±0.20 *1
LMF325 B7225[]MHP X7R 2.2 μ ±10, ±20 3.5 200 2.5±0.20 *1
LMF325 B7475[]MHP X7R 4.7 μ ±10, ±20 5 200 2.5±0.20 *1
16
10
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
50
25
25
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
50
100
50
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
Part number 1 Part number 2 Rated voltage
[V]
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
100
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
50
25
16
10
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
37
PART NUMBER
【Temperature Characteristic B7 : X7R(-55~+125℃)】 1.9mm thickness(N)
HTLT
Rated voltage x %
HMF325 B7223[]NHT X7R 0.022 μ ±10, ±20 2.5 200 1.9±0.20 *1
HMF325 B7473[]NHT X7R 0.047 μ ±10, ±20 2.5 200 1.9±0.20 *1
UMF325 B7223[]NHT X7R 0.022 μ ±10, ±20 2.5 200 1.9±0.20 *1
UMF325 B7473[]NHT X7R 0.047 μ ±10, ±20 2.5 200 1.9±0.20 *1
UMF325 B7104[]NHT X7R 0.1 μ ±10, ±20 3.5 200 1.9±0.20 *1
UMF325 B7224[]NHT X7R 0.22 μ ±10, ±20 3.5 200 1.9±0.20 *1
UMF325 B7474[]NHT X7R 0.47 μ ±10, ±20 3.5 200 1.9±0.20 *1
UMF325 B7105[]NHT X7R 1 μ ±10, ±20 3.5 200 1.9±0.20 *1
TMF325 B7224[]NHT X7R 0.22 μ ±10, ±20 3.5 200 1.9±0.20 *1
TMF325 B7474[]NHT X7R 0.47 μ ±10, ±20 3.5 200 1.9±0.20 *1
TMF325 B7105[]NHT X7R 1 μ ±10, ±20 3.5 200 1.9±0.20 *1
EMF325 B7224[]NHT X7R 0.22 μ ±10, ±20 3.5 200 1.9±0.20 *1
EMF325 B7474[]NHT X7R 0.47 μ ±10, ±20 3.5 200 1.9±0.20 *1
EMF325 B7105[]NHT X7R 1 μ ±10, ±20 3.5 200 1.9±0.20 *1
LMF325 B7224[]NHT X7R 0.22 μ ±10, ±20 3.5 200 1.9±0.20 *1
LMF325 B7474[]NHT X7R 0.47 μ ±10, ±20 3.5 200 1.9±0.20 *1
LMF325 B7105[]NHT X7R 1 μ ±10, ±20 3.5 200 1.9±0.20 *1
50
25
16
10
Capacitance
[F]
Capacitance
tolerance [%]
tanδ
[%] Thickness
*3
[mm] Note
100
Part number 1 Part number 2 Rated voltage
[V]
Temperature
characteristics
hq_c_mlcc_e-E07R01
CERAMIC CAPACITORS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
38
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Multilayer Ceramic Capacitors
PACKAGING
①Minimum Quantity
Taped package
Type(EIA) Thickness Standard quantity [pcs]
mm code Paper tape Embossed tape
□MK021(008004) 0.125 K 50000
□VS021(008004)
□MK042(01005) 0.2 C, D 40000
□VS042(01005) 0.2 C
□MK063(0201) 0.3 P,T 15000
□WK105(0204) 0.3 P 10000
□MK105(0402)
□MF105(0402)
0.13 H 20000
0.18 E 15000
0.2 C 20000
0.3 P 15000
0.5 V 10000
□VK105(0402) 0.5 W 10000
□MK107(0603)
□WK107(0306)
□MF107(0603)
0.45 K 4000
0.5 V 4000
0.8 A 4000
□VS107(0603) 0.7 C 4000
□MJ107(0603) 0.8 A 3000 3000
□MK212(0805)
□WK212(0508)
□MF212(0805)
0.45 K 4000
0.85 D
1.25 G 3000
□VS212(0805) 0.85 D 4000
□MJ212(0805) 0.85 D 4000
1.25 G 2000
□MK316(1206)
□MF316(1206)
0.85 D 4000
1.15 F 3000
1.6 L 2000
□MJ316(1206) 1.15 F 3000
1.6 L 2000
□MK325(1210)
□MF325(1210)
0.85 D
2000
1.15 F
1.9 N
2.0max. Y
2.5 M 1000
□MJ325(1210) 1.9 N 2000
2.5 M 500(T), 1000(P)
□MK432(1812) 2.5 M 500
Note : LW Reverse type.
②Taping material
※No bottom tape for pressed carrier tape
Card board carrier tape
Top tape
Base tape
Sprocket hole
Bottom tape Chip cavity
Embossed tape
Top tape
Base tape
Sprocket hole
Chip cavity
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Chip filled
Chip
LW Reverse type.
③Representative taping dimensions
Paper Tape(8mm wide)
Pressed carrier tape 2mm pitch Unitmminch)
F2.0±0.05
(0.079±0.002)
4.0±0.1
(0.157±0.004)
1.75
±
0.1
(0.069±0.004)
3.5±0.05
(0.138±0.002)
8.0±0.3
(0.315±0.012)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Sprocket hole
A
B
T
T1
Type(EIA) Chip Cavity Insertion Pitch Tape Thickness
T1
□MK063(0201) 0.37 0.67
2.0±0.05
0.45max. 0.42max.
□WK105(0204)
0.65 1.15
□MK105(0402) (*1 C) 0.4max. 0.3max.
□MK105(0402) (*1 P) 0.45max. 0.42max.
Note *1 Thickness, C:0.2mm ,P:0.3mm. LW Reverse type. Unit:mm
●Punched carrier tape (2mm pitch) Unit:mm(inch)
F2.0±0.05
(0.079±0.002)
4.0±0.1
(0.157±0.004)
1.75
±
0.1
(0.069±0.004)
3.5±0.05
(0.138±0.002)
8.0±0.3
(0.315±0.012)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Sprocket hole
A
B
T
Type(EIA) Chip Cavity Insertion Pitch Tape Thickness
□MK105 (0402)
□MF105 (0402)
□VK105 (0402)
0.65 1.15 2.0±0.05 0.8max.
Unit:mm
●Punched carrier tape (4mm pitch) Unit:mm(inch)
F
2.0±0.1
(0.079±0.004)
4.0±0.1
(0.157±0.004)
1.75
±
0.1
(0.069±0.004)
3.5±0.05
(0.138±0.002)
8.0±0.3
(0.315±0.012)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Sprocket hole
A
B
T
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Type(EIA) Chip Cavity Insertion Pitch Tape Thickness
□MK107(0603)
□WK107(0306)
□MF107(0603)
1.0 1.8
4.0±0.1
1.1max.
□MK212(0805)
□WK212(0508) 1.65 2.4 1.1max.
□MK316(1206) 2.0 3.6
Note:Taping size might be different depending on the size of the product. LW Reverse type. Unit:mm
Embossed tape4mm wide Unitmminch
F1.0±0.02
(
0.039
±
0.001)
2.0±0.04
(
0.079
±
0.002)
0.9
±
0.05
(0.035±0.002)
1.8±0.02
(0.071±0.001)
4.0±0.05
(0.157±0.002)
φ0.8±0.04
(φ0.031±0.002)
Sprocket hole
A
B
Type(EIA) Chip Cavity Insertion Pitch Tape Thickness
K T
□MK021(008004) 0.135 0.27
1.0±0.02 0.5max. 0.25max.
□VS021(008004)
□MK042(01005) 0.23 0.43
□VS042(01005)
Unit:mm
Embossed tape8mm wide Unitmminch
F
2.0±0.1
(0.079±0.004)
4.0±0.1
(0.157±0.004)
1.75±0.1
(0.069±0.004)
3.5±0.05
(0.138±0.002)
8.0±0.3
(0.315±0.012)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Sprocket hole
A
B
Type(EIA) Chip Cavity Insertion Pitch Tape Thickness
K T
□MK105(0402) 0.6 1.1 2.0±0.1 0.6max 0.2±0.1
□WK107(0306) 1.0 1.8
4.0±0.1
1.3max. 0.25±0.1
□MK212(0805)
□MF212(0805) 1.65 2.4
3.4max. 0.6max.
□MK316(1206)
□MF316(1206) 2.0 3.6
□MK325(1210)
□MF325(1210) 2.8 3.6
Note: LW Reverse type. Unit:mm
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Embossed tape(12mm wide) Unit:mm(inch)
F
2.0±0.1
(0.079±0.004)
4.0±0.1
(0.157±0.004)
1.75±0.1
(0.069±0.004)
5.5±0.05
(0.217±0.002)
12.0±0.3
(0.472±0.012)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Sprocket hole
A
B
Type(EIA) Chip Cavity Insertion Pitch Tape Thickness
K T
□MK325(1210) 3.1 4.0 8.0±0.1 4.0max. 0.6max.
□MK432(1812) 3.7 4.9 8.0±0.1 4.0max. 0.6max.
Unit:mm
④Trailer and Leader
Blank portion Chip cavity Blank portion Leader
160mm or more
(6.3inches or more)
Direction of tape feed
100mm or more
(3.94inches or more)
400mm or more
(15.7inches or more)
⑤Reel size
E
C
D
R B
t
A
W
A B C D E R
φ178±2.0 φ50min. φ13.0±0.2 φ21.0±0.8 2.0±0.5 1.0
T W
4mm wide tape 1.5max. 5±1.0
8mm wide tape 2.5max. 10±1.5
12mm wide tape 2.5max. 14±1.5 Unit:mm
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
0~20° Top tape
Base tape
Pull direction
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
Multilayer Ceramic Capacitors
RELIABILITY DATA
1.Operating Temperature Range
Specified
Value
Temperature
Compensating(Class1)
Standard -55 to +125℃
High Frequency Type
High Permittivity (Class2)
Specification Temperature Range
BJ B -25 to +85℃
X5R -55 to +85℃
B7 X7R -55 to +125℃
C6 X6S -55 to +105℃
C7 X7S -55 to +125℃
D7 X7T -55 to +125℃
LD(※) X5R -55 to +85℃
Note: ※LD Low distortion high value multilayer ceramic capacitor
2. Storage Conditions
Specified
Value
Temperature
Compensating(Class1)
Standard -55 to +125℃
High Frequency Type
High Permittivity (Class2)
Specification Temperature Range
BJ B -25 to +85℃
X5R -55 to +85℃
B7 X7R -55 to +125℃
C6 X6S -55 to +105℃
C7 X7S -55 to +125℃
D7 X7T 55 to +125℃
LD(※) X5R -55 to +85℃
Note: ※LD Low distortion high value multilayer ceramic capacitor
3. Rated Voltage
Specified
Value
Temperature
Compensating(Class1)
Standard 50VDC, 25VDC
High Frequency Type 50VDC, 25VDC
High Permittivity (Class2) 50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC
4. Withstanding Voltage (Between terminals)
Specified
Value
Temperature
Compensating(Class1)
Standard
No breakdown or damage
High Frequency Type
High Permittivity (Class2)
Test
Methods and
Remarks
Class 1 Class 2
Applied voltage Rated volta×3 Rated voltage×2.5
Duration 1 to 5 sec.
Charge/discharge current 50mA max.
5. Insulation Resistance
Specified
Value
Temperature
Compensating(Class1)
Standard 10000 MΩ min.
High Frequency Type
High Permittivity (Class2) Note 1 C≦0.047μF : 10000 min.
C>0.047μF : 500MΩ・μF
Test
Methods and
Remarks
Applied voltage : Rated voltage
Duration : 60±5 sec.
Charge/discharge current : 50mA max.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
6. Capacitance (Tolerance)
Specified
Value
Temperature
Compensating(Class1)
Standard
C□
U□
SL
0.2pF≦C≦5pF : ±0.25pF
0.2pF≦C≦10pF : ±0.5pF
C>10pF : ±5% or ±10%
High Frequency Type CH 0.3pF≦C≦2pF : ±0.1pF
C>2pF : ±5%
High Permittivity (Class2) BJ, B7, C6, C7, D7, LD(※) : ±10% or ±20%
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1 Class 2
Standard High Frequency Type C≦10μF C>10μF
Preconditioning None Thermal treatment (at 150℃ for 1hr) Note 2
Measuring frequency 1MHz±10% 1kHz±10% 120±10Hz
Measuring voltage Note 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1rms
Bias application one
7. Q or Dissipation Factor
Specified
Value
Temperature
Compensating(Class1)
Standard C<30pF : Q≧400+20C
C≧30pF : Q≧1000CNominal capacitance)
High Frequency Type Refer to detailed specification
High Permittivity (Class2) Note 1 BJ, B7, C6, C7, D7:2.5% max.
Test
Methods and
Remarks
Class 1 Class 2
Standard High Frequency Type C≦10μF C>10μF
Preconditioning None Thermal treatment (at 150℃ for 1hr) Note 2
Measuring frequey 1MHz±10% 1GHz 1kHz±10% 120±10Hz
Measuring voltage Note 1 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1Vrms
Bias application None
High Frequency Type
Measuring equipment : HP4291A
Measuring jig : HP16192A
8. Temperature Characteristic (Without voltage application)
Specified
Value
Temperature
Compensating(Class1)
Standard
Temperature Characteristic [ppm/℃] Tolerance [ppm/℃]
C□ : 0 CG,CH, CJ, CK G : ±30
H : ±60
J : ±120
K : ±250
U□ : -750 UJ, UK
SL : +350 to -1000
High Frequency Type Temperature Characteristic [ppm/℃] Tolerance [ppm/℃]
C□ : 0 CH H : ±60
High Permittivity (Class2)
Specification Capacitance
change
Reference
temperature Temperature Range
BJ B ±10% 20℃ -25 to +85℃
X5R ±15% 25℃ -55 to +85℃
B7 X7R ±15% 25℃ -55 to +125℃
C6 X6S ±22% 25℃ -55 to +105℃
C7 X7S ±22% 25℃ -55 to +125℃
D7 X7S +22/-33% 25℃ -55 to +125℃
LD(※) X5R ±15% 25℃ -55 to +85℃
Note : ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
(C85-C20 ×106(ppm/℃)
C20×△T △T=65
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step B X5R、X7R、X6S、X7S、X7T
1 Minimum operating temperature
2 20℃ 25℃
3 Maximum operating temperature
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
(C-C2 ×100(%)
C2
C :Capacitance in Step 1 or Step 3
C2 :Capacitance in Step 2
9. Deflection
Specified
Value
Temperature
Compensating(Class1)
Standard Appearance : No abnormality
Capacitance change : Within ±5% or ±0.5 pF, whichever is larger.
High Frequency Type Appearance : No abnormality
Cpaitance change : Within±0.5 pF
High Permittivity (Class2)
Appearance : No abnormality
Capacitance change : Within ±12.5%(BJ, B7, C6, C7, D7, LD(※))
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Multilayer Ceramic Capacitors
042, 063, ※1105 Type The other types
Board Glass epoxy-resin substrate
Thickness 0.8mm 1.6mm
Warp 1mm (Soft Termination type:3mm)
Duration 10 sec.
※1:105 Type thickness, C: 0.2mm ,P 0.3mm.
Capacitance measurement shall be conducted
with the board bent
10. Body Strength
Specified
Value
Temperature
Compensating(Class1)
Standard
High Frequency Type No mechanical damage.
High Permittivity (Class2)
Test
Methods and
Remarks
High Frequency Type
Applied force : 5N
Duration : 10 sec.
11. Adhesive Strength of Terminal Electrodes
Specified
Value
Temperature
Compensating(Class1)
Standard
No terminal separation or its indication.
High Frequency Type
High Permittivity (Class2)
Test
Methods and
Remarks
Multilayer Ceramic Capacitors
042, 063 Type 105 Type or more
Applied force 2N 5N
Duration 30±5 sec.
12. Solderability
Specified
Value
Temperature
Compensating(Class1)
Standard
At least 95% of terminal electrode is covered by new solder.
High Frequency Type
High Permittivity (Class2)
Test
Methods and
Remarks
Eutectic solder Lead-free solder
Solder type H60A or H63A Sn-3.0Ag-0.5Cu
Solder temperature 230±5℃ 245±3℃
Duration 4±1 sec.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
13. Resistance to Soldering
Specified
Value
Temperature
Compensating(Class1)
Standard
Appearance : No abnormality
Capacitance change : Within ±2.5% or ±0.25pF, whichever is larger.
Q : Initial value
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
High Frequency Type
Appearance : No abnormality
Capacitancecange : Within ±2.5%
Q : Initial value
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
High Permittivity (Class2) Note 1
Appearance : No abormality
Capactace change : Within ±7.5%(BJ, B7, C6, C7, D7, LD(※))
Dissipation factor : Initial value
Insulation resistance : Initial value
Withstanding voltage (between terminals): No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
lss 1
042, 063 Type 105 Type
Preconditioning None
Preheating 150℃, 1 to 2 min. 80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
Solder temp. 270±5℃
Duration 3±0.5 sec.
Recovery 6 to 24 hrs (Standard condition) Noe 5
Class 2
042、063 Type 105, 107, 212 Type 316, 325 Type
Preconditioning Thermal treatment (at 150℃ for 1 hr) Note 2
Preheating 150℃, 1 to 2 min. 80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
80 to 100℃, 5 to 10 min.
150 to 200℃, 5 to 10 min.
Solder temp. 270±5℃
Duration 3±0.5 sec.
Recovery 24±2 hrs (Standard condition) Note 5
14. Temperature Cycle (Thermal Shock)
Specified
Value
Temperature
Compensating(Class1)
Standard
Appearance : No abnormality
Capacitance change : Within ±2.5% or ±0.25pF, whichever is larger.
Q : Initial value
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
High Frequency Type
Appearance : No abnormality
Capacitance change : Within ±0.25pF
Q : Initial value
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
High Permittivity (Class2) Note 1
Appearance : No abnormality
Capacitance change : Within ±7.5% (BJ, B7, C6, C7, D7, LD(※))
Dissipation factor : Initial value
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1 Class 2
Preconditioning None Thermal treatment (at 150℃ for 1 hr)
Note 2
1 cycle
Step Temperature(℃) Time(min.)
1 Minimum operating temperature 30±3
2 Normal temperature 2 to 3
3 Maximum operating temperature 30±3
4 Normal temperature 2 to 3
Number of cycles 5 times
Recovery 6 to 24 hrs (Standard condition) Note 5 24±2 hrs (Standard condition) Note 5
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
15. Humidity (Steady State)
Specified
Value
Temperature
Compensating(Class1)
Standard
Appearance : No abnormality
Capacitance change : Within ±5% or ±0.5pF, whichever is larger.
Q : C<10pF : Q≧200+10C
10≦C<30pF : Q≧275+2.5C
C≧30pF:Q≧350(C:Nominal capacitance)
Insulation resistance : 1000 MΩ min.
High Frequency Type
Appearance : No abnormality
Capacitance change : Within ±0.5pF,
Insulation resistance : 1000 MΩ min.
High Permittivity (Class2) Note 1
Appearance : No abnormality
Capacitance change : Within ±12.5% (BJ, B7, C6, C7, D7, LD(※))
Dissipation factor : 5.0% max.(BJ, B7, C6, C7, D7, LD(※))
Insulation resistance : 50 MΩμF or 1000 MΩ whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1 Class 2
Standard High Frequency Type All items
Preconditioning None Thermal treatment( at 150℃ for 1 hr) Note 2
Temperature 40±2℃ 60±2℃ 40±2℃
Humidity 90 to 95%RH 90 to 95%RH
Duration 500+24/-0 hrs 500+24/-0 hrs
Recovery 6 to 24 hrs (Standard condition) Note 5 24±2 hrs (Standard condition) Note 5
16. Humidity Loading
Specified
Value
Temperature
Compensating(Class1)
Standard
Appearance : No abnormality
Capacitance change : Within ±7.5% or ±0.75pF, whichever is larger.
Q : C<30pF:Q≧100+10C/3
C≧30pF:Q≧200 (C:Nominal capacitance)
Insulation resistance : 500 MΩ min.
High Frequency Type
Appearance : No abnormality
Capacitance change : C≦2pF:Within ±0.4 pF
C>2pF:Within ±0.75 pF
CNominal capacitance)
Insulation resistance : 500 MΩ min.
High Permittivity (Class2) Note 1
Appearance : No abnormality
Capacitance change : Within ±12.5% (BJ, B7, C6, C7, D7, LD(※))
Dissipation factor : 5.0% max. (BJ, B7, C6, C7, D7, LD(※))
Insulation resistance : 25 MΩμF or 500 , whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1 Class 2
Standard High Frequency Type All items
Preconditioning None Voltage treatment
(Rated voltage are applied for 1 hour at 40℃) Note 3
Temperature 40±2℃ 60±2℃ 40±2℃
Humidity 90 to 95%RH 90 to 95%RH
Duration 500+24/-0 hrs 500+24/-0 hrs
Applied voltage Rated voltage Rated voltage
Charge/discharge
current 50mA max. 50mA max.
Recovery 6 to 24 hrs (Standard condition) Note 5 24±2 hrs(Standard condition) Note 5
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
17. High Temperature Loading
Specified
Value
Temperature
Compensating(Class1)
Standard
Appearance : No abnormality
Capacitance change : Within ±3% or ±0.3pF, whichever is larger.
Q : C<10pF: Q≧200+10C
10≦C<30pF:Q≧275+2.5C
C≧30pF: Q≧350(C:Nominal capacitance)
Insulation resistance : 1000 MΩ min.
High Frequency Type
Appearance : No abnormality
Capacitance change : Within ±3% or ±0.3pF, whichever is larger.
Insulation resistance : 1000 MΩ min.
High Permittivity (Class2) Note 1
Appearance : No abnormality
Capacitance change : Within ±12.5% (BJ, B7, C6, C7, D7, LD(※))
Dissipation factor : 5.0% max.(BJ, B7, C6, C7, D7, LD(※))
Insulation resistance : 50 MΩμF or 1000 MΩ, whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Test
Methods and
Remarks
Class 1 Class 2
Standard High Frequency Type BJ, LD(※) C6 B7, C7, D7
Preconditioning None Voltage treatment(Twice the rated voltage shall be applied for
1 hour at 85℃, 105℃ or 125℃) Note 3, 4
Temperature Maximum operating temperature Maximum operating temperature
Duration 1000+48/-0 hrs 1000+48/-0 hrs
Applied voltage Rated voltage×2 Rated voltage×2 Note 4
Charge/discharge
current 50mA max. 50mA max.
Recovery 6 to 24hr (Standard condition) Note 5 24±2 hrs (Standard condition) Note 5
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature for
24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in
the test conditions, and kept at room temperature for 24±2hours.
Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information.
Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning
measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the
"standard condition".
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01
Medium-High Voltage Multilayer Ceramic Capacitor
RELIABILITY DATA
1. Operating Temperature Range
Specified Value
Temperature Compensating(High Frequency type)
CG(C0G) : -55 to +125℃
High permittivity
X7R, X7S : -55 to +125℃
X5 : -55 to +85℃
B : -25 to +85℃
2. Storage Temperature Range
Specified Value
Temperature Compensating(High Frequency type)
CG(C0G) : -55 to +125℃
High permittivity
X7R, X7S : -55 to +125℃
X5R : -55 to +85℃
B : -25 to +85℃
3. Rated Voltage
Specified Value 100VDC(HMK,HMJ), 250VDC(QMK,QMJ,QVS), 630VDC(SMK,SMJ)
4. Withstanding Voltage(Between terminals)
Specified Value No breakdown or damage
Test Methods and
Remarks
Applied voltage : Rated voltage×2.5(HMK,HMJ), Rated voltage×2(QMK,QMJ,QVS), Rated voltage×1.2(SMK,SMJ)
Duration : 1 to 5sec.
Carge/discharge current : 50mA max.
5.Insulation Resistance
Specified Value
Temperature Compensating(High Frequency type)
10000MΩ min
High permittivity
100MΩμF or 10GΩ, whichever is smaller.
Test Methods and
Remarks
Applied voltage : Rated voltage(HMK,HMJ, QMK,QMJ,QVS), 500V(SMK,SMJ)
Duration : 60±5sec.
Charge/discharge current : 50mA max.
6.Capacitance (Tolerance)
Specified Value
Temperature Compensating(High Frequency type)
±0.1pF (C<5pF) ±0.25pF (C<10pF) ±0.5pF (5pF≦C<10pF) ±2%(C=10pF) ±5%(C≧10pF)
High permittivity
±10%, ±20%
Test Methods and
Remarks
Temperature Compensating(High Frequency type)
Measuring frequency : 1MHz±10%
Measuring voltage : 0.5 to 5Vrms
Bias application : None
High permittivity
Measuring frequency : 1kHz±10%
Measuring voltage : 1±0.2Vrms
Bias application : None
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01
7.Q or Dissipation Factor
Specified Value
Temperature Compensating(High Frequency type)
C<30pF : Q≧800+20C
C≧30pF : Q≧1400 C:Normal Capacitance(/pF)
High permittivity
3.5%max(HMK,HMJ)
2.5%max(QMK,QMJ, SMK,SMJ)
Test Methods and
Remarks
Temperature Compensating(High Frequency type)
Measuring frequency : 1MHz±10%
Measuring voltage : 0.5 to 5Vrms
Bas application : None
High permittivity
Measuring frequency : 1kHz±10%
Measuring voltage : 1±0.2Vrms
Bas application : None
8.Temperature Characteristic of Capacitance
Specified Value
Temperature Compensating(High Frequency type)
C0G :±30ppm(25 to +125℃)
High permittivity
B : ±10%(-25 to +85℃)
X5R : ±15%(-55 to +85℃)
X7R : ±15%(-55 to +125℃)
X7S : ±22%(-55 to +125℃)
Test Methods and
Remarks
Temperature Compensating(High Frequency type)
Capacitance at 25℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
(C85-C25 ×106×[ppm/℃]
C25×ΔT
High permittivity
Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
Step B X5R、X7R、X7S
1 Minimum operating tempeature
2 20℃ 25℃
3 Maximum operating temperature
(C-C2 ×100(%)
C2
C : Capacitance value in Step 1 or Step 3
C2 : Capacitance value in Step 2
9.Deflection
Specified Value
Temperature Compensating(High Frequency type)
Appearance : No abnormality
Capacitance change :±5% or ±0.5pF, whichever is larger.
High permittivity
Appearance : No abnormality
Capacitance change : Within±10%
Test Methods and
Remarks
Warp : 1mm (Soft Termination type:3mm)
Duration : 10sec.
Test board : Glass epoxy-resin substrate
Thicknss : 1.6mm
Capacitance measurement shall be conducted with the board bent.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01
10.Adhesive Strength of Terminal Electrodes
Specified Value No terminal separation or its indication.
Test Methods and
Remarks
Temperature Compensating(High Frequency type)
Applied force : 2N
Duration : 10±5sec.
High permittivity
Applied force : 5N
Duration : 30±5sec.
11.Solderability
Specified Value At least 95% of terminal electrode is covered by new solder
Test Methods and
Remarks
Eutectic solder Lead-free solder
Solder type H60A or H63A Sn-3.0Ag-0.5Cu
Solder temperature 230±5℃ 245±3℃
Duration 4±1 sec.
12.Resistance to Soldering
Specified Value
Temperature Compensating(High Frequency type)
Appearance : No abnormality
Capacitance change : C※≦10pF :±0.25pF C※>10pF :±2.5% ※Normal capacitance
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
High permittivity
Appearance : No abnormality
Capacitance change : Within±15%(HMK,HMJ), ±10%(QMK,QMJ, SMK,SMJ
Dissipation factor : Inital value
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
Test Methods and
Remarks
Preconditioning : Thermal treatment(at 150℃ for 1hr) Note1 (Only High permittivity)
Solder temperature : 270±5℃
Duration : 3±0.5sec.
Preheating conditions : 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5min.
Recovery : 24±2hrs under the stadard condition Note3
13.Temperature Cycle (Thermal Shock)
Specified Value
Temperature Compensating(High Frequency type)
Appearance : No abnormality
Capacitance change : C※≦10pF :±0.25% C※>10pF :±2.5%
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
High permittivity
Appearance : No abnormality
Capacitance change : Within±15%(HMK,HMJ), ±7.5%(QMK,QMJ, SMK,SMJ)
Dissipation factor : Initial value
Insulation resistance : Initial value
Withstanding voltage (between terminals) : No abnormality
Test Methods and
Remarks
Preconditioning : Thermal treatment (at 150℃ for 1hr) Note1
Conditions for 1 cycle
Step temperature(℃) Time(min.)
1 Minimum operating temperature 30±3min.
2 Normal temperature 2 to 3min.
3 Maximum operating temperature 30±3min.
4 Normal temperature 2 to 3min.
Number of cycles : 5 times
Recovery : 24±2hrs under the standard condition Note3
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01
14.Humidity (Steady state)
Specified Value
Temperature Compensating(High Frequency type)
Appearance : No abnormality
Capacitance change : C※≦10pF :±0.5pF C※>10pF :±5% ※Normal capacitance
Insulation resistance : 1000MΩmin
High permittivity
Appearance : No abnormality
Capacitance change : Within±15%
Dissipation factor : 7%max(HMK,HMJ), 5%max(QMK,QMJ, SMK,SMJ).
Insulation resistance : 25MΩμF or 1000MΩ, whichever is smaller.
Test Methods and
Remarks
Preconditioning : Thermal treatment(at 150℃ for 1hr) Note1 (Only High permittivity)
Temperature : 40±2℃
Humidity : 90 to 95%RH
Duration : 500 +24/-0 hrs
Recovery : 24±2hrs under the standard condition Note3
15.Humidity Loading
Specified Value
Temperature Compensating(High Frequency type)
Appearance : No abnormality
Capacitance change : C※≦2.0pF :±0.4pF 2.0pF<C≦10pF : ±0.75pF C※>10pF :±7.5%
: ※Normal capacitance
Insulation resistance : 500MΩmin
High permittivity
Appearance : No abnormality
Capacitance change : Within±15%
Dissipation factor : 7%max(HMK,HMJ), 5%max(QMK,QMJ, SMK,SMJ).
Insulation resistance : 10MΩμF or 500MΩ, whichever is smaller.
Test Methods and
Remarks
According to JIS 5102 clause 9.9.
Preconditioning : Voltage treatment Note2 (Only High permittivity)
Temperature : 40±2℃
Humidity : 90 to 95%RH
Applied voltage : Rated voltage
Charge/discharge current : 50mA max.
Duration : 500 +24/-0 hrs
Recovery : 24±2hrs under the standard condition Note3
16.High Temperature Loading
Specified Value
Temperature Compensating(High Frequency type)
Appearance : No abnormality
Capacitance change : C※≦10pF :±0.3pF C※>10pF :±3%
Insulation resistance :1000MΩmin
High permittivity
Appearance : No abnormality
Capacitance change : Within±15%
Dissipation factor : 7%max(HMK,HMJ), 5%max(QMK,QMJ, SMK,SMJ).
Insulation resistance : 50MΩμF or 1000MΩ, whichever is smaller.
Test Methods and
Remarks
According to JIS 5102 clause 9.10.
Preconditioning : Voltage treatment Note2 (Only High permittivity)
Temperature : Maximum operating temperature
Applied voltage : Rated voltage×2(HMK,HMJ,QVS) Rated voltage×1.5(QMK,QMJ) Rated voltage×1.2(SMK,SMJ)
Charge/discharge current : 50mA max.
Duration : 1000 +24/-0 hrs
Recovery : 24±2hrs under the standard condition Note3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature
for 24±2hours.
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in
the test conditions, and kept at room temperature for 24±2hours.
Note3 Standard condition : Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted
under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
Precautions on the use of Multilayer Ceramic Capacitors
PRECAUTIONS
1. Circuit Design
Precautions
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have
severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from
them used in general purpose applications.
◆Operating Voltage (Verification of Rated voltage)
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC
voltage or a pulse voltage having rapid rise time is used in a circuit.
2. PCB Design
Precautions
◆Pattern configurations (Design of Land-patterns)
1. When capacitors are mounted on PCBs, the amount of solder used (size of fillet) can directly affect the capacitor performance.
Therefore, the following items must be carefully considered in the design of land patterns:
(1)Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider
appropriate land-patterns for proper amount of solder.
(2)When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by
solder-resist.
◆Pattern configurations (Capacitor layout on PCBs)
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes (PCB
cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.). For this reason, land
pattern configurations and positions of capacitors shall be carefully considered to minimize stresses.
Technical
considerations
◆Pattern configurations (Design of Land-patterns)
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
(1)Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions
(unit: mm)
Wave-soldering
Type 107 212 316 325
Size L 1.6 2.0 3.2 3.2
W 0.8 1.25 1.6 2.5
A 0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5
B 0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7
C 0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5
Land patterns for PCBs
C
B A B
Chip capacitor
Land pattern
Solder-resist
L
W
Chip capacitor
Reflow-soldering
Type 042 063 105 107 212 316 325 432
Size L 0.4 0.6 1.0 1.6 2.0 3.2 3.2 4.5
W 0.2 0.3 0.5 0.8 1.25 1.6 2.5 3.2
A 0.15 to 0.25 0.20 to 0.30 0.45 to 0.55 0.8 to 1.0 0.8 to 1.2 1.8 to 2.5 1.8 to 2.5 2.5 to 3.5
B 0.15 to 0.20 0.20 to 0.30 0.40 to 0.50 0.6 to 0.8 0.8 to 1.2 1.0 to 1.5 1.0 to 1.5 1.5 to 1.8
C 0.15 to 0.30 0.25 to 0.40 0.45 to 0.55 0.6 to 0.8 0.9 to 1.6 1.2 to 2.0 1.8 to 3.2 2.3 to 3.5
Note:Recommended land size might be different according to the allowance of the size of the product.
●LWDC: Recommended land dimensions for reflow-soldering
(unit: mm)
Type 105 107 212
Size L 0.52 0.8 1.25
W 1.0 1.6 2.0
A 0.18 to 0.22 0.25 to 0.3 0.5 to 0.7
B 0.2 to 0.25 0.3 to 0.4 0.4 to 0.5
C 0.9 to 1.1 1.5 to 1.7 1.9 to 2.1
L
W
LWDC
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
(2)Examples of good and bad solder application
Items Not eommended Recommended
Mixed mounting of SMD and
leaded components
Lead wire of component
Solder-resist
Component placement close to
the chassis
Chassis
Solder (for grounding)
Electrode pattern
Solder-resist
Hand-soldering of leaded
Components near mounted
components
Soldering iron
Lead wire of component
Solder-resist
Horizontal component
placement
Solder-resist
◆Pattern configurations (Capacitor layout on PCBs)
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any possible mechanical
stresses from board warp or deflection.
Items Not recommended Recommended
Deflection of board
Place the product at a right
angle to the direction of the
anticipated mechanical
stress.
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
E
D
C
A B
Slit
Magnitude of stress A>B=C>D>E
Perforation
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods
are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB,
split methods as well as chip location.
3. Mounting
Precautions
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2. Maintenance and inspection of mounting machines shall be conducted periodically.
◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the
following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and
hardening period. Therefore, please contact us for further information.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
Technical
considerations
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid
this, the following points shall be considerable.
(1)The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
(2)The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
(3)To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be
used on the other side of the PCB. The following diagrams show some typical examples of good and bad pick-up nozzle
placement:
Items Not recommended Recommended
Single-sided mounting
chipping
or cracking
supporting pins
or back-up pins
Double-sided mounting
chipping
or cracking
supporting pins
or back-up pins
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical
impact on the capacitors.
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of
the pin shall be conducted periodically.
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in
stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect
components. Therefore, the following precautions shall be noted in the application of adhesives.
(1)Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f. The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
(2)The recommended amount of adhesives is as follows;
[Recommended condition]
Figure 212/316 case sizes as examples
a 0.3mm min
b 100 to 120μm
c Adhesives shall not contact land
Amount adhesive
a a
b
After capacitor are bonded
c c
4. Soldering
Precautions
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
(1)Flux used shall be less than or equal to 0.1 wt%( in Cl equivalent) of halogenated content. Flux having a strong acidity content shall
not be applied.
(2)When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
(3)When water-soluble flux is used, special care shall be taken to properly clean the boards.
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
Technical
considerations
◆Selection of Flux
1-1. When too much halogenated substance(Chlorine, etc.) content is used to activate flux, or highly acidic flux is used, it may lead to
corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted
and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high
humidity conditions may cause a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning
methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
◆Soldering
Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal
shock.
Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within
100 to 130℃.
Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.
[Reflow soldering]
【Recommended conditions for eutectic soldering】
Preheating 230℃
Within 10sec.
Slow cooling
60sec.
Min.
60sec
Min.
300
200
100
0
Temperature(℃)
【Recommended condition for Pb-free soldering】
Peak
260℃ Max.
Within 10sec.
Slow
cooling
Heating above
230℃
40sec. Max.
300
200
100
0
Temperature(℃)
Preheating150℃
60sec. Min.
Caution
The ideal condition is to have solder mass(filletcontrolled to 1/2 to 1/3 of the
thickness of a capacitor.
②Because excessive dwell times can adversely affect solderability, soldering duration shall
be kept as close to recommended times as possible.
③Allowable number of reflow soldering : 2 times max.
1/2T~1/3T
PC board
Solder
Capacitor
T
[Wave soldering]
【Recommended conditions for eutectic soldering】
230~250℃
Within 3sec.
Slow cooling
Preheating
120sec. Min.
300
200
100
0
Temperature(℃)
【Recommended condition for Pb-free soldering】
Peak
260℃ Max.
Within 10sec.
Slow
cooling
120sec. Min.
300
200
100
0
Temperature(℃)
Preheating
150℃
Caution
①Wave soldering must not be applied to capacitors designated as for reflow soldering only.
②Allowable number of wave soldering : 1 times max.
[Hand soldering]
【Recommended conditions for eutectic soldering】
230~280℃
Within 3sec.
Slow cooling
Preheating
60sec. Min.
400
200
100
0
Temperature(℃)
300
【Recommended condition for Pb-free soldering】
Peak
350℃ Max.
Within 3sec.
Slow cooling
⊿T
400
200
100
0
Temperature(℃)
Preheating
150℃ Min.
60sec. Min.
300
⊿T
316type or less ⊿T≦150℃
Peak
280℃ Max.
Within 3sec.
Slow cooling
⊿T
400
200
100
0
温度(℃)
Preheating
150℃ Min.
60sec. Min.
300
⊿T
325type or more ⊿T≦130℃
Caution
①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.
②The soldering iron shall not directly touch capacitors.
③Allowable number of hand soldering : 1 times max.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
5. Cleaning
Precautions
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use
of the cleaning. (e.g. to remove soldering flux or other materials from the production process.)
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect
capacitor's characteristics.
Technical
considerations
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate
their outer coating, resulting in a degradation of the capacitor's electrical properties (especially insulation resistance).
2. Inappropriate cleaning conditions( insufficient or excessive cleaning) may adversely affect the performance of the capacitors.
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the
cracking of capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall
be carefully checked;
Ultrasonic output : 20 W/ or less
Ultrasonic frequency : 40 kHz or less
Ultrasonic washing period : 5 min. or less
6. Resin coating and mold
Precautions
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or
while left under normal storage conditions resulting in the deterioration of the capacitor's performance.
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat
may lead to damage or destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
7. Handling
Precautions
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
(1)If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
(2)Please be careful that the mounted components do not come in contact with or bump against other boards or components.
8. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature : Below 30℃
Humidity : Below 70% RH
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as
time passes, so capacitors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, so