CF, CFM Series Datasheet

Stackpole Electronics Inc.

View All Related Products | Download PDF Datasheet

Datasheet

Rev Date: 03/02/2016 1 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Carbon Film & Metal Film Resistors (1/4W Body Size)
0.256 ±0.020 inches 0.433 inches
6.50 ±0.50 mm 11.00 mm
0.098 ±0.020 inches 0.500 ±0.039 inches
2.50 ±0.50 mm 12.70 ±1.00 mm
0.091 ±0.008 inches 0.500 ±0.012 inches
2.30 ±0.20 mm 12.70 ±0.30 mm
0.157 ±0.012 inches 0.152 ±0.028 inches
4.00 ±0.30 mm 3.85 ±0.70 mm
0.197 ±0.039 inches 0.250 ±0.051 inches
5.00 ±1.00 mm 6.35 ±1.30 mm
0.748 ±0.039 inches 0.028 ±0.008 inches
19.00 ±1.00 mm 0.70 ±0.20 mm
0.630 ±0.020 inches 0.709 ±0.039 inches
16.00 ±0.50 mm 18.00 ±1.00 mm
1.122 inches
0.49 inches
28.50 mm
12.50 mm
0 ± 0.079 inches 0.354 ±0.030 inches
0 ± 2.00 mm 9.00 ±0.75 mm
0 ± 0.079 inches 0.118 inches
0 ± 2.00 mm 3.00 mm
0.079 inches
2.00 mm
max.
C
Height of bending
F
Resistor lead spacing
T
P
1
P
D
0
Sprocket-hole diameter
Sprocket-hole position
W
0
Hold-down tape width
min.
L
max.
max.
W
Chipboard width(1)
Thickness
(chipboard and tape)
Resitor pitch(1)
min.
W
1
I
Lead protrusion
H
0
Height to lead clinch
h
1
h
Resistor alignment
H
1
Height of resistor
Resistor alignment
Unit
max.
A
Resistor body length
H
Height to bottom of resistor
D
Resistor body diameter
W
2
Hold-down tape position
Cutout Length(1)
P
2
Sprocket-hole center to
resistor center(1)
P
0
Sprocket-hole pitch(1)
Sprocket-hole center to
lead center
Symbol
Description
PANA-SERT
Unit
PANA-SERT
Symbol
Description
Radial Lead Taping Specification Pana-Sert
Rev Date: 03/02/2016 2 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
(1)
(2)
Dimension "E":
The given dimension "D" expresses the standard width spacing. A 26mm narrow spacing is available as option "N" packaging code.
The distance between flanges shall be 0.059 inches (1.50 mm) to 0.315 (8.00 mm) greater than the overall component.
Reference value only. The "A" dimension shall be governed by the overall length of the taped component.
Range of diameters is from 0.547 inches (13.90 mm) to 1.500 inches (38.10 mm).
This is a non-critical dimension that does not have a tolerance in the standard.
Lead-Tape Specifications: Reeled in accordance with EIA-296-F
Series Code Tape Unit
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.500 ±0.079 0.250 inches
10.00 ±0.50 63.50 ±2.00 6.35 mm
61.50
2.508
343.00
13.504
2.736
69.50
2.421
13.504
343.00
13.504
343.00
13.504
343.00
13.504
343.00
63.70
2.638
67.00
69.50
2.972
75.50
3.130
79.50
2.508
13.504
343.00
13.504
343.00
13.504
3.917
99.50
66.50
13.504
343.00
63.70
2.638
67.00
13.504
343.00
2.618
343.00
13.504
343.00
13.504
343.00
D
(2)
B max
2.736
63.70
2.618
66.50
2.736
69.50
343.00
13.504
A max
.(1)
3.917
99.50
63.70
2.618
66.50
ASR
ASRM
CD
CFM
12
14
12
14
CF
18
14
12
1
2
1
14
FRN
14
12
2
1
12
C
18
2.508
2.508
13.504
343.00
343.00
13.504
343.00
13.504
343.00
13.504
Axial Leaded Resistor
Packaging & Identification Variations
Rev Date: 03/02/2016 3 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
(1)
(2)
Dimension "E":
The given dimension "D" expresses the standard width spacing. A 26mm narrow spacing is available as option "N" packaging code.
The distance between flanges shall be 0.059 inches (1.50 mm) to 0.315 (8.00 mm) greater than the overall component.
Reference value only. The "A" dimension shall be governed by the overall length of the taped component.
Range of diameters is from 0.547 inches (13.90 mm) to 1.500 inches (38.10 mm).
This is a non-critical dimension that does not have a tolerance in the standard.
Axial Leaded Resistors
Packaging
Lead Tape Specifications: Reeled in accordance with EIA-296-F (cont.)
Series Code Tape Unit
0.197 ±0.020 2.063 ±0.079 0.250 inches
5.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.875 ±0.079 0.250 inches
10.00 ±0.50 73.03 ±2.00 6.35 mm
0.394 ±0.020 4.310 ±0.079 0.250 inches
10.00 ±0.50 109.47 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
2.756 ±0.118 11.811 ±0.197 0.197 ±0.020 2.047 ±0.020 0.250 inches
70.00 ±3.00 300.00 ±5.00 5.00 ±0.50 52.00 ±0.50 6.35 mm
2.756 ±0.118 11.811 ±0.197 0.197 ±0.020 2.047 ±0.020 0.250 inches
70.00 ±3.00 300.00 ±5.00 5.00 ±0.50 52.00 ±0.50 6.35 mm
2.756 ±0.118 11.811 ±0.197 0.197 ±0.020 2.047 ±0.020 0.250 inches
70.00 ±3.00 300.00 ±5.00 5.00 ±0.50 52.00 ±0.50 6.35 mm
2.756 ±0.118 11.811 ±0.197 0.197 ±0.020 2.047 ±0.020 0.250 inches
70.00 ±3.00 300.00 ±5.00 5.00 ±0.50 52.00 ±0.50 6.35 mm
2.756 ±0.118 11.811 ±0.197 0.197 ±0.020 2.047 ±0.020 0.250 inches
70.00 ±3.00 300.00 ±5.00 5.00 ±0.50 52.00 ±0.50 6.35 mm
2.756 ±0.118 11.811 ±0.197 0.197 ±0.020 2.047 ±0.020 0.250 inches
70.00 ±3.00 300.00 ±5.00 5.00 ±0.50 52.00 ±0.50 6.35 mm
2.756 ±0.118 11.811 ±0.197 0.197 ±0.020 2.047 ±0.020 0.250 inches
70.00 ±3.00 300.00 ±5.00 5.00 ±0.50 52.00 ±0.50 6.35 mm
343.00
13.504
343.00
13.504
343.00
13.504
343.00
13.504
343.00
13.504
343.00
343.00
13.504
2.756
70.00
2.728
94.90
343.00
13.504
343.00
13.504
343.00
13.504
343.00
13.504
69.30
2.787
70.80
4.094
104.00
5.118
130.00
4.764
121.00
3.563
90.50
3.736
RC
14
12
1
RNMF
14
12
RNF
18
14
12
1
2
10
MWW
1
3
5
10
MR
1
3
5
84.10
3.484
88.50
3.850
97.80
D
(2)
A max
.(1)
B max
C
3.311
13.504
Rev Date: 03/02/2016 4 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Lead Tape Specifications: Reeled in accordance with EIA-296-F (cont.)
(1)
(2)
Dimension "E":
The given dimension "D" expresses the standard width spacing. A 26mm narrow spacing is available as option "N" packaging code.
The distance between flanges shall be 0.059 inches (1.50 mm) to 0.315 (8.00 mm) greater than the overall component.
Reference value only. The "A" dimension shall be governed by the overall length of the taped component.
Range of diameters is from 0.547 inches (13.90 mm) to 1.500 inches (38.10 mm).
This is a non-critical dimension that does not have a tolerance in the standard.
Axial Leaded Resistors
Packaging
Series Code A max.(1) B max Tape Unit
2.736 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
69.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
2.815 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
71.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
3.524 13.504
0.394 ±0.020 2.500 ±0.079 0.250 inches
89.50
343.00 10.00 ±0.50 63.50 ±2.00 6.35 mm
3.740 12.008
0.394 ±0.020 2.874 ±0.079 0.250 inches
95.00
305.00 10.00 ±0.50 73.00 ±2.00 6.35 mm
4.331 12.008
0.394 ±0.020 3.465 ±0.079 0.250 inches
110.00
305.00 10.00 ±0.50 88.00 ±2.00 6.35 mm
2.618 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
66.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
2.736 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
69.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
2.815 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
71.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
3.524 13.504
0.394 ±0.020 2.500 ±0.079 0.250 inches
89.50
343.00 10.00 ±0.50 63.50 ±2.00 6.35 mm
3.740 12.008
0.394 ±0.020 2.874 ±0.079 0.250 inches
95.00
305.00 10.00 ±0.50 73.00 ±2.00 6.35 mm
2.618 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
66.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
2.736 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
69.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
2.815 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
71.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
3.524 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
89.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
2.618 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
66.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
2.736 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
69.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
3.366 13.504
0.197 ±0.020 2.063 ±0.079 0.250 inches
85.50
343.00 5.00 ±0.50 52.40 ±2.00 6.35 mm
3.524 13.504
0.394 ±0.020 2.063 ±0.079 0.250 inches
89.50
343.00 10.00 ±0.50 52.40 ±2.00 6.35 mm
1
2
3
12
1
2
3
12
RSPF
RSPL
D(2)
RSF
12
1
2
3
C
5
RSMF
12
1
2
3
5
Rev Date: 03/02/2016 5 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Lead Tape Specifications: Reeled in accordance with EIA-296-F
(1)
(2)
Dimension "E":
The given dimension "D" expresses the standard width spacing. A 26mm narrow spacing is available as option "N" packaging code.
The distance between flanges shall be 0.059 inches (1.50 mm) to 0.315 (8.00 mm) greater than the overall component.
Reference value only. The "A" dimension shall be governed by the overall length of the taped component.
Range of diameters is from 0.547 inches (13.90 mm) to 1.500 inches (38.10 mm).
This is a non-critical dimension that does not have a tolerance in the standard.
Series Code A max.(1) B max Unit
2.063 11.000
0.400 ±0.020 2.063 ±0.079 inches
52.40
279.40 10.16 ±0.50 52.40 ±2.00 mm
2.736 13.504
0.197 ±0.020 2.063 ±0.079 inches
69.50
343.00 5.00 ±0.50 52.40 ±2.00 mm
3.917 13.504
0.394 ±0.020 2.063 ±0.079 inches
99.50
343.00 10.00 ±0.50 52.40 ±2.00 mm
6.299 13.504
0.394 ±0.020 2.063 ±0.079 inches
160.00
343.00 10.00 ±0.50 52.40 ±2.00 mm
6.614 13.504
0.394 ±0.020 2.063 ±0.079 inches
168.00
343.00 10.00 ±0.50 52.40 ±2.00 mm
2.756 11.933
0.197 ±0.020 2.047 ±0.079 0.236 ±0.039 inches
70.00
303.10 5.00 ±0.50 52.00 ±2.00 6.00 ±1.00 mm
2.756 11.933
0.197 ±0.020 2.047 ±0.079 0.236 ±0.039 inches
70.00
303.10 5.00 ±0.50 52.00 ±2.00 6.00 ±1.00 mm
2.756 11.933
0.197 ±0.020 2.047 ±0.079 0.236 ±0.039 inches
70.00
303.10 5.00 ±0.50 52.00 ±2.00 6.00 ±1.00 mm
2.756 11.933
0.197 ±0.020 2.047 ±0.079 0.236 ±0.039 inches
70.00
303.10 5.00 ±0.50 52.00 ±2.00 6.00 ±1.00 mm
2.880 11.000
0.200 ±0.020 2.063 ±0.079 inches
73.15
279.40 5.08 ±0.50 52.40 ±2.00 mm
2.880 11.000
0.200 ±0.020 2.063 ±0.079 inches
73.15
279.40 5.08 ±0.50 52.40 ±2.00 mm
2.880 11.000
0.200 ±0.020 2.063 ±0.079 inches
73.15
279.40 5.08 ±0.50 52.40 ±2.00 mm
2.880 11.000
0.200 ±0.020 2.063 ±0.079 inches
73.15
279.40 5.08 ±0.50 52.40 ±2.00 mm
2.880 11.000
0.200 ±0.020 2.063 ±0.079 inches
73.15
279.40 5.08 ±0.50 52.40 ±2.00 mm
2.063 11.000
0.200 ±0.020 2.500 ±0.079 inches
52.40
279.40 5.08 ±0.50 63.50 ±2.00 mm
3.740 11.000
0.400 ±0.020 2.874 ±0.079 inches
95.00
279.40 10.16 ±0.50 73.00 ±2.00 mm
2.500 11.000
0.400 ±0.020 2.500 ±0.079 inches
63.50
279.40 10.16 ±0.50 63.50 ±2.00 mm
3.740 11.000
0.400 ±0.020 2.874 ±0.079 inches
95.00
279.40 10.16 ±0.50 73.00 ±2.00 mm
5.100 11.000
0.400 ±0.020 2.874 ±0.079 inches
129.54
279.40 10.16 ±0.50 73.00 ±2.00 mm
5.100 11.000
0.400 ±0.020 2.874 ±0.079 inches
129.54
279.40 10.16 ±0.50 73.00 ±2.00 mm
5.100 11.000
0.400 ±0.020 2.874 ±0.079 inches
129.54
279.40 10.16 ±0.50 73.00 ±2.00 mm
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
0.250
6.35
Tape
0.250
6.35
0.250
WW
H
1/WWS2
1A
2/WWS3
2A
3/WWS4
3A
10
5/WWS7
7
7B/WWS10
C
SP
3A
WRC
D(2)
TMR
3
5
SPR
12
1
1S
1
2, 2A, 3A, 4A, 5A
3B, 4B, 5B
4/WWS5
Axial Leaded Resistors
Packaging
Rev Date: 03/02/2016 6 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
RAVF10 - RAVF32 Packaging Specifications
FEATURES
Material Pieces/Reel
0.046 ±0.004 0.051 ±0.008 0.071 ±0.004 0.079 ±0.008 0.134 ±0.004 inches
1.17 ±0.10 1.30 ±0.20 1.80 ±0.10 2.00 ±0.20 3.40 ±0.10 mm
0.046 ±0.004 0.091 ±0.008 0.071 ±0.004 0.142 ±0.008 0.220 ±0.004 inches
1.17 ±0.10 2.30 ±0.20 1.80 ±0.10 3.60 ±0.20 5.60 ±0.10 mm
0.157 ±0.004 0.157 ±0.004 0.157 ±0.004 0.157 ±0.004 0.157 ±0.004 inches
4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 mm
0.059 ±0.004 0.059 ±0.004 0.059 ±0.004 0.059 ±0.004 0.039 ±0.004 inches
1.50 ±0.10 1.50 ±0.10 1.50 ±0.10 1.50 ±0.10 1.00 ±0.10 mm
0.138 ±0.002 0.138 ±0.002 0.138 ±0.002 0.138 ±0.002 0.217 ±0.002 inches
3.50 ±0.05 3.50 ±0.05 3.50 ±0.05 3.50 ±0.05 5.50 ±0.05 mm
7.008 ±0.079 7.008 ±0.079 7.008 ±0.079 7.008 ±0.079 7.008 ±0.079 inches
178.00 ±2.00 178.00 ±2.00 178.00 ±2.00 178.00 ±2.00 178.00 ±2.00 mm
inches
mm
0.512 ±0.039 0.512 ±0.039 0.512 ±0.039 0.512 ±0.039 0.512 ±0.008 inches
13.00 ±1.00 13.00 ±1.00 13.00 ±1.00 13.00 ±1.00 13.00 ±0.20 mm
0.827 ±0.039 0.827 ±0.039 0.827 ±0.039 0.827 ±0.039 0.827 ±0.031 inches
21.00 ±1.00 21.00 ±1.00 21.00 ±1.00 21.00 ±1.00 21.00 ±0.80 mm
0.079 ±0.039 0.079 ±0.039 0.079 ±0.039 0.079 ±0.039 0.079 ±0.020 inches
2.00 ±1.00 2.00 ±1.00 2.00 ±1.00 2.00 ±1.00 2.00 ±0.50 mm
0.079 ±0.002 0.079 ±0.002 0.157 ±0.004 0.157 ±0.004 0.157 ±0.004 inches
2.00 ±0.05 2.00 ±0.05 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 mm
0.531 ±0.079 0.531 ±0.079 0.531 ±0.079 0.531 ±0.079 0.354 ±0.012 inches
13.50 ±2.00 13.50 ±2.00 13.50 ±2.00 13.50 ±2.00 9.00 ±0.30 mm
0.031 ±0.008 0.031 ±0.008 0.031 ±0.008 0.031 ±0.008 inches
0.80 ±0.20 0.80 ±0.20 0.80 ±0.20 0.80 ±0.20 mm
0.039 0.039 0.020 0.039 0.010 ±0.002 inches
1.00 1.00 0.50 1.00 0.25 ±0.05 mm
0.055 0.055 0.039 0.055 0.043 inches
1.40 1.40 1.00 1.40 1.10 mm
inches
mm
0.315 ±0.008 0.315 ±0.008 0.315 ±0.008 0.315 ±0.008 0.472 ±0.008 inches
8.00 ±0.20 8.00 ±0.20 8.00 ±0.20 8.00 ±0.20 12.00 ±0.20 mm
T2
U
P
S
T
J
Hub Diameter
W
Symbol
Unit
A
Pocket Width
RAVF324D
RAVF102D
K
L
M
RAVF104D
RAVF162D
RAVF164D/RAVF328
T1
B
C
D
F
H
Paper - 5,000
Embossed - 4,000
60.00
50.00
2.362
1.969
Paper - 10,000
Paper - 10,000
Paper - 5,000
50.00
50.00
1.969
Key Diameter
Strip Width
Strip Thickness
Total Thickness
Key Width
Side Thickness
Reel Outside Width
Reel Inside Width
Pocket Spacing
-
Pocket Length
max
max
max
1.969
50.00
1.969
max
max
max
Pin Spacing
Pin Diameter
Pin-Pocket C/L
Reel Diameter
Hole Diameter
11.40
max
max
max
max
max
max
max
0.449
max
max
max
max
max
-
Chip Array Resistors
Packaging Specifications
Rev Date: 03/02/2016 7 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
FEATURES
Material Pieces/Reel
0.079 ±0.008 0.138 ±0.004 0.098 ±0.004 0.138 ±0.004 inches
2.00 ±0.20 3.50 ±0.10 2.50 ±0.10 3.50 ±0.10 mm
0.142 ±0.008 0.224 ±0.004 0.173 ±0.004 0.266 ±0.004 inches
3.60 ±0.20 5.70 ±0.10 4.40 ±0.10 6.75 ±0.10 mm
0.157 ±0.004 0.157 ±0.004 0.157 ±0.004 0.157 ±0.004 inches
4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 mm
0.059 ±0.004 0.039 ±0.004 0.059 ±0.004 0.059 ±0.004 inches
1.50 ±0.10 1.00 ±0.10 1.50 ±0.10 1.50 ±0.10 mm
0.138 ±0.002 0.217 ±0.002 0.217 ±0.020 0.217 ±0.002 inches
3.50 ±0.05 5.50 ±0.05 5.50 ±0.50 5.50 ±0.05 mm
7.008 ±0.079 7.008 ±0.079 7.008 ±0.079 7.008 ±0.079 inches
178.00 ±2.00 178.00 ±2.00 178.00 ±2.00 178.00 ±2.00 mm
2.362 ±0.039 2.362 ±0.039 2.362 ±0.039 inches
60.00 ±1.00 60.00 ±1.00 60.00 ±1.00 mm
0.512 ±0.039 0.512 ±0.008 0.512 ±0.008 0.512 ±0.008 inches
13.00 ±1.00 13.00 ±0.20 13.00 ±0.20 13.00 ±0.20 mm
0.827 ±0.039 0.827 ±0.031 0.827 ±0.031 0.827 ±0.031 inches
21.00 ±1.00 21.00 ±0.80 21.00 ±0.80 21.00 ±0.80 mm
0.079 ±0.039 0.079 ±0.020 0.079 ±0.020 0.079 ±0.020 inches
2.00 ±1.00 2.00 ±0.50 2.00 ±0.50 2.00 ±0.50 mm
0.157 ±0.004 0.157 ±0.004 0.157 ±0.004 0.157 ±0.004 inches
4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 4.00 ±0.10 mm
0.531 ±0.079 0.354 ±0.012 0.354 ±0.012 0.354 ±0.012 inches
13.50 ±2.00 9.00 ±0.30 9.00 ±0.30 9.00 ±0.30 mm
0.031 ±0.008 inches
0.80 ±0.20 mm
0.020 0.010 ±0.002 0.010 ±0.002 0.010 ±0.002 inches
0.50 0.25 ±0.05 0.25 ±0.05 0.25 ±0.05 mm
0.039 0.043 0.043 0.043 inches
1.00 1.10 1.10 1.10 mm
0.449 ±0.039 0.449 ±0.039 0.449 ±0.039 inches
11.40 ±1.00 11.40 ±1.00 11.40 ±1.00 mm
0.315 ±0.008 0.472 ±0.008 0.472 ±0.008 0.472 ±0.008 inches
8.00 ±0.20 12.00 ±0.20 12.00 ±0.20 12.00 ±0.20 mm
U
W
Symbol
P
S
T
T1
J
K
L
M
C
D
F
H
T2
max
max
Embossed - 4,000
A
B
Pocket Width
Pin Spacing
Pin Diameter
max
max
1.969
Pocket Length
max
max
Unit
Embossed - 4,000
RACF408M
RACF648N/RACF648R
max
Pin-to-Pocket Center
-
-
max
max
max
RACF164D
RACF324D
Paper - 5,000
Embossed - 4,000
50.00
Strip Width
Strip Thickness
Total Thickness
Reel Side Thickness
Reel Diameter
Hub Diameter
Hole Diameter
Key Width
Reel Inside Width
Pocket Spacing
Key Diameter
Reel Outside Width
Chip Array Resistors
Packaging Specifications
RACF16 - RACF64 Packaging Specifications
Rev Date: 03/02/2016 8 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
RMCS Packaging Specifications
Type Unit
0.015 ±0.002 0.027 ±0.002 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
0.38 ±0.05 0.68 ±0.05 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.026 ±0.004 0.045 ±0.004 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
0.65 ±0.10 1.15 ±0.10 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.043 ±0.004 0.075 ±0.004 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
1.10 ±0.10 1.90 ±0.10 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.063 ±0.004 0.094 ±0.008 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
1.60 ±0.10 2.40 ±0.20 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.075 ±0.004 0.138 ±0.008 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
1.90 ±0.10 3.50 ±0.20 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.110 ±0.004 0.138 ±0.008 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
2.80 ±0.10 3.50 ±0.20 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.110 ±0.008 0.217 ±0.008 0.472 ±0.012 0.069 ±0.004 0.217 ±0.002 inches
2.80 ±0.20 5.50 ±0.20 12.00 ±0.30 1.75 ±0.10 5.50 ±0.05 mm
0.138 ±0.008 0.264 ±0.008 0.472 ±0.012 0.069 ±0.004 0.217 ±0.002 inches
3.50 ±0.20 6.70 ±0.20 12.00 ±0.30 1.75 ±0.10 5.50 ±0.05 mm
RMCS0201
RMCS0402
F
L
M
W
E
RMCS2010
RMCS2512
RMCS0603
RMCS0805
RMCS1206
RMCS1210
Chip Resistors
RMCS Paper Tape Specifications
RMCS Embossed Plastic Tape Specifications
Rev Date: 03/02/2016 9 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
RMCS Packaging Specifications (cont.)
Chip Resistors
RMCS Paper Tape Specifications
RMCS Embossed Plastic Tape Specifications
Type Unit
0.157 ±0.004 0.079 ±0.002 0.079 ±0.002 0.059 ±0.004 0.017 ±0.008 inches
4.00 ±0.10 2.00 ±0.05 2.00 ±0.05 1.50 ±0.10 0.42 ±0.20 mm
0.157 ±0.004 0.079 ±0.002 0.079 ±0.002 0.059 ±0.004 0.018 ±0.004 inches
4.00 ±0.10 2.00 ±0.05 2.00 ±0.05 1.50 ±0.10 0.45 ±0.10 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.059 ±0.004 0.028 ±0.004 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.50 ±0.10 0.70 ±0.10 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.059 ±0.004 0.033 ±0.004 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.50 ±0.10 0.85 ±0.10 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.059 ±0.004 0.033 ±0.004 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.50 ±0.10 0.85 ±0.10 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.059 ±0.004 0.033 ±0.004 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.50 ±0.10 0.85 ±0.10 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.059 ±0.004 0.047 - 0 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.50 ±0.10 1.20 - 0 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.059 ±0.004 0.047 - 0 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.50 ±0.10 1.20 - 0 mm
ØD0
K1/K2
RMCS0201
RMCS0402
P0
P1
P2
RMCS0603
RMCS0805
RMCS1206
RMCS1210
RMCS2010
RMCS2512
Rev Date: 03/02/2016 10 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
RNCS Packaging Specifications
Chip Resistors
RNCS Paper Tape Specifications
RNCS Embossed Plastic Tape Specifications
Type Unit
0.028 ±0.002 0.046 ±0.002 0.315 ±0.004 0.069 ±0.004 0.138 ±0.002 inches
0.70 ±0.05 1.16 ±0.05 8.00 ±0.10 1.75 ±0.10 3.50 ±0.05 mm
0.043 ±0.002 0.075 ±0.002 0.315 ±0.004 0.069 ±0.004 0.138 ±0.002 inches
1.10 ±0.05 1.90 ±0.05 8.00 ±0.10 1.75 ±0.10 3.50 ±0.05 mm
0.063 ±0.002 0.093 ±0.002 0.315 ±0.004 0.069 ±0.004 0.138 ±0.002 inches
1.60 ±0.05 2.37 ±0.05 8.00 ±0.10 1.75 ±0.10 3.50 ±0.05 mm
0.079 ±0.002 0.140 ±0.002 0.315 ±0.004 0.069 ±0.004 0.138 ±0.002 inches
2.00 ±0.05 3.55 ±0.05 8.00 ±0.10 1.75 ±0.10 3.50 ±0.05 mm
0.112 ±0.004 0.215 ±0.004 0.472 ±0.004 0.069 ±0.004 0.217 ±0.002 inches
2.85 ±0.10 5.45 ±0.10 12.00 ±0.10 1.75 ±0.10 5.50 ±0.05 mm
0.134 ±0.004 0.262 ±0.004 0.472 ±0.004 0.069 ±0.004 0.217 ±0.002 inches
3.40 ±0.10 6.65 ±0.10 12.00 ±0.10 1.75 ±0.10 5.50 ±0.05 mm
Type Unit
0.157 ±0.004 0.079 ±0.002 0.079 ±0.002 0.061 ±0.002 0.016 ±0.001 inches
4.00 ±0.10 2.00 ±0.05 2.00 ±0.05 1.55 ±0.05 0.40 ±0.03 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.061 ±0.002 0.024 ±0.001 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.60 ±0.03 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.061 ±0.002 0.030 ±0.002 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.75 ±0.05 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.061 ±0.002 0.030 ±0.002 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 0.75 ±0.05 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.061 ±0.002 0.039 ±0.008 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 1.00 ±0.20 mm
0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.061 ±0.002 0.039 ±0.008 inches
4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.55 ±0.05 1.00 ±0.20 mm
RNCS0805
RNCS1206
RNCS2010
RNCS2512
RNCS0402
RNCS0603
K1/K2
P
0
P1
P2
ØD
0
W
E
F
RNCS2010
RNCS2512
L
M
RNCS0402
RNCS0603
RNCS0805
RNCS1206
Rev Date: 03/02/2016 11 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
RPC Packaging Specifications
Chip Resistors
RPC Paper Tape Specifications
RPC Embossed Plastic Tape Specifications
Type Unit
0.043 ±0.004 0.075 ±0.004 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
1.10 ±0.10 1.90 ±0.10 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.063 ±0.004 0.094 ±0.008 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
1.60 ±0.10 2.40 ±0.20 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.075 ±0.004 0.138 ±0.008 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
1.90 ±0.10 3.50 ±0.20 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.110 ±0.004 0.138 ±0.008 0.315 ±0.008 0.069 ±0.004 0.138 ±0.002 inches
2.80 ±0.10 3.50 ±0.20 8.00 ±0.20 1.75 ±0.10 3.50 ±0.05 mm
0.110 ±0.008 0.217 ±0.008 0.472 ±0.012 0.069 ±0.004 0.217 ±0.002 inches
2.80 ±0.20 5.50 ±0.20 12.00 ±0.30 1.75 ±0.10 5.50 ±0.05 mm
0.138 ±0.008 0.264 ±0.008 0.472 ±0.012 0.069 ±0.004 0.217 ±0.002 inches
3.50 ±0.20 6.70 ±0.20 12.00 ±0.30 1.75 ±0.10 5.50 ±0.05 mm
Type Unit
0.157 ±0.004 0.157 ±0.394 0.079 ±0.002 0.059 ±0.004 0.028 ±0.004 inches
4.00 ±0.10 4.00 ±10.00 2.00 ±0.05 1.50 ±0.10 0.70 ±0.10 mm
0.157 ±0.004 0.157 ±0.394 0.079 ±0.002 0.059 ±0.004 0.033 ±0.004 inches
4.00 ±0.10 4.00 ±10.00 2.00 ±0.05 1.50 ±0.10 0.85 ±0.10 mm
0.157 ±0.004 0.157 ±0.394 0.079 ±0.002 0.059 ±0.004 0.033 ±0.004 inches
4.00 ±0.10 4.00 ±10.00 2.00 ±0.05 1.50 ±0.10 0.85 ±0.10 mm
0.157 ±0.004 0.157 ±0.394 0.079 ±0.002 0.059 ±0.004 0.033 ±0.004 inches
4.00 ±0.10 4.00 ±10.00 2.00 ±0.05 1.50 ±0.10 0.85 ±0.10 mm
0.157 ±0.004 0.157 ±0.394 0.079 ±0.002 0.059 ±0.004 0.047 -0.000 inches
4.00 ±0.10 4.00 ±10.00 2.00 ±0.05 1.50 ±0.10 1.20 -0.00 mm
0.157 ±0.004 0.157 ±0.394 0.079 ±0.002 0.059 ±0.004 0.047 -0.000 inches
4.00 ±0.10 4.00 ±10.00 2.00 ±0.05 1.50 ±0.10 1.20 -0.00 mm
RPC2512
P
0
P1
P2
K1/K2
RPC1210
RPC0805
RPC1206
RPC2010
RPC2512
RPC1206
RPC1210
RPC2010
RPC0603
F
E
ØD0
L
M
W
RPC0603
RPC0805
Rev Date: 03/02/2016 12 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
CSS Packaging Specifications
Type Unit
0.137 ±0.004 0.072 ±0.004 0.315 ±0.006 0.069 ±0.004 0.138 ±0.004 0.043 ±0.004
inches
3.48 ±0.10 1.83 ±0.10 8.00 ±0.15 1.75 ±0.10 3.50 ±0.10 1.10 ±0.10
mm
0.215 ±0.004 0.114 ±0.004 0.472 ±0.006 0.069 ±0.004 0.217 ±0.004 0.052 ±0.004
inches
5.45 ±0.10 2.90 ±0.10 12.00 ±0.15 1.75 ±0.10 5.50 ±0.10 1.33 ±0.10
mm
0.266 ±0.004 0.138 ±0.004 0.472 ±0.006 0.069 ±0.004 0.217 ±0.004 0.051 ±0.004
inches
6.75 ±0.10 3.50 ±0.10 12.00 ±0.15 1.75 ±0.10 5.50 ±0.10 1.30 ±0.10
mm
0.281 ±0.004 0.266 ±0.004 0.472 ±0.006 0.069 ±0.004 0.217 ±0.004 0.077 ±0.004
inches
7.15 ±0.10 6.75 ±0.10 12.00 ±0.15 1.75 ±0.10 5.50 ±0.10 1.95 ±0.10
mm
0.281 ±0.004 0.303 ±0.004 0.472 ±0.006 0.069 ±0.004 0.217 ±0.004 0.057 ±0.004
inches
7.15 ±0.10 7.70 ±0.10 12.00 ±0.15 1.75 ±0.10 5.50 ±0.10 1.45 ±0.10
mm
0.465 ±0.004 0.283 ±0.004 0.945 ±0.006 0.069 ±0.004 0.453 ±0.004 0.079 ±0.004
inches
11.80 ±0.10 7.20 ±0.10 24.00 ±0.15 1.75 ±0.10 11.50 ±0.10 2.00 ±0.10
mm
Type
0.008 ±0.002 0.157 ±0.004 0.157 ±0.004 0.079 ±0.004 0.059 ±0.004
0.20 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.10 1.50 ±0.10
0.009 ±0.002 0.157 ±0.004 0.157 ±0.004 0.079 ±0.004 0.059 ±0.004
0.23 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.10 1.50 ±0.10
0.008 ±0.002 0.157 ±0.004 0.157 ±0.004 0.079 ±0.004 0.059 ±0.004
0.20 ±0.05 4.00 ±0.10 4.00 ±0.10 2.00 ±0.10 1.50 ±0.10
0.010 ±0.002 0.315 ±0.004 0.157 ±0.004 0.079 ±0.004 0.059 ±0.004
0.25 ±0.05 8.00 ±0.10 4.00 ±0.10 2.00 ±0.10 1.50 ±0.10
0.010 ±0.002 0.472 ±0.004 0.157 ±0.004 0.079 ±0.004 0.059 ±0.004
0.25 ±0.05 12.00 ±0.10 4.00 ±0.10 2.00 ±0.10 1.50 ±0.10
0.012 ±0.004 0.472 ±0.004 0.157 ±0.004 0.079 ±0.004 0.059 ±0.004
0.30 ±0.10 12.00 ±0.10 4.00 ±0.10 2.00 ±0.10 1.50 ±0.10
E
F
CSS2725
CSS2728
A
B
W
CSS2728
CSS4527
T2
P
T1
CSS1206
CSS2010
CSS2512
CSS2725
P0
P1
ΦD
CSS1206
CSS4527
CSS2010
CSS2512
Unit
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
inches
mm
Chip Resistors
CSS Embossed Plastic Tape Specifications
Rev Date: 03/02/2016 13 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Type Unit
7.087 ±0.118 2.362 ±0.039 0.512 ±0.008 0.827 ±0.031 0.079 ±0.020 0.512 ±0.012 0.606 ±0.039 Inches
180.00 ±3.00 60.00 ±1.00 13.00 ±0.20 21.00 ±0.80 2.00 ±0.50 13.00 ±0.30 15.40 ±1.00 mm
RHC2512
W2
A
B
C
D
E
W1
RHC Embossed Plastic Tape Specifications
RHC Packaging Specifications
Type Unit
0.134 ±0.004 0.260 ±0.004 0.472 ±0.008 0.217 ±0.002 0.069 ±0.004 0.157 ±0.004 Inches
3.40 ±0.10 6.60 ±0.10 12.00 ±0.20 5.50 ±0.05 1.75 ±0.10 4.00 ±0.10 mm
Type
0.079 ±0.002 0.157 ±0.004 0.061 ±0.002 0.010 ±0.002 0.039 ±0.004
2.00 ±0.05 4.00 ±0.10 1.55 ±0.05 0.25 ±0.05 1.00 ±0.10
P1
t1
t2
A
B
W
F
E
RHC2512
RHC2512
P2
P0
D0
Unit
Inches
mm
RHC Reel Specifications
Rev Date: 03/02/2016 14 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Notes:
1. Dimensions are 0.472 ± 0.004 inches (12 ± 0.1 mm) for 2010 and 2512 size.
2. 5,000 per 7" reel - 0603, 0805 & 1206 size; 4,000 per 7" reel - 1210, 2010 & 2512 size. Available options - 10,000 piece 13" reels.
3. Embossed taping standard 4,000 per 7" reel on 1210, 2010 & 2512 size.
E G Unit
0.157 ±0.004 0.079 ±0.004 0.157 ±0.004 0.059 +0.004 /-0 0.039 0.069 ±0.002 0.197 0.138 ±0.002 0.315 ±0.004 inches
4.00 ±0.10 2.00 ±0.10 4.00 ±0.10 1.50 +0.10 / -0 1.00 1.75 ±0.05 5.00 3.50 ±0.05 8.00 ±0.10 mm
F
H
J (1)
A
B
C
D
Packaging: Chips per EIA Standard RS-481
Unit
0.043 max 0.043 ±0.008 0.075 ±0.008 inches
1.10 max 1.10 ±0.20 1.90 ±0.20 mm
0.043 max 0.065 ±0.008 0.094 ±0.008 inches
1.10 max 1.65 ±0.20 2.40 ±0.20 mm
0.043 max 0.094 max 0.079 ±0.004 0.138 ±0.002 inches
1.10 max 2.40 max 2.00 ±0.10 3.50 ±0.05 mm
0.094 max 0.110 ±0.008 0.142 ±0.008 inches
2.40 max 2.80 ±0.20 3.60 ±0.20 mm
0.094 max 0.110 ±0.008 0.217 ±0.008 inches
2.40 max 2.80 ±0.20 5.50 ±0.20 mm
0.094 max 0.150 ±0.008 0.264 ±0.008 inches
2.40 max 3.80 ±0.20 6.70 ±0.20 mm
Type
CSR0603, HVC0603, RGC0603,
RMCF0603, RNCF0603
K1
L
M
K2
-
CSR0805, FCR0805, HMC0805, HVC0805,
RGC0805, RMCF0805, RNCF0805
CSR2512, HVC2512, RMCF2512, RNCF2512
RMCF1210, FCR1210, RNCF1210
CSR2010, HVC2010, RMCF2010, RNCF2010
-
CSR1206, FCR1206, HMC1206, HVC1206,
RGC1206, RMCF1206, RNCF1206
Chip Resistor Reel
Nominal Dimensions
Inches (mm)
Rev Date: 03/02/2016 15 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Standard Tape Packaging
2mm Pitch - 10,000 per reel
Reel diameter - 7 inches (178 mm)
Reel width - 0.315 inches (8 mm)
Packaging: HPC and SM
Unit
0.026 ±0.004 0.045 ±0.004 0.315 ±0.008 0.138 ±0.002 0.069 ±0.004 inches
0.65 ±0.10 1.15 ±0.10 8.00 ±0.20 3.50 ±0.05 1.75 ±0.10 mm
Unit
0.079 ±0.002 0.039 ±0.002 0.059 ±0.004 0.016 ±0.002 0.020 inches
2.00 ±0.05 1.00 ±0.05 1.50 ±0.10 0.40 ±0.05 0.50 mm
F
G
E
A
B
C
D
max
max
J
K
L
Chip Resistors
Packaging Specifications
HPC and SMD Resistors
Packaging Specifications
Packaging 0201 and 0402 Chip Size (2mm pitch)
Product P
0
E
1
T S
0
P
1
A
0
K
0
B
0
Unit
1.260 ±0.012 0.157 0.069 0.018 1.118 0.945 0.529 0.440 0.529 inches
32.00 ±0.30 4.00 1.75 0.45 28.40 24.00 13.44 11.17 13.44 mm
0.630 +0.012 0.157 0.069 0.018 0.315 0.161 0.159 0.302 inches
16.00 +0.30 4.00 1.75 0.45 8.00 4.10 4.03 7.66 mm
0.945 +0.012 0.157 0.069 0.018 0.472 0.257 0.206 0.457 inches
24.00 +0.30 4.00 1.75 0.45 12.00 6.53 5.22 11.60 mm
1.260 ±0.012 0.157 0.069 0.018 1.118 0.472 0.276 0.271 0.665 inches
32.00 ±0.30 4.00 1.75 0.45 28.40 12.00 7.01 6.88 16.89 mm
1.732 ±0.012 0.157 0.069 0.018 1.591 0.630 0.343 0.396 0.856 inches
44.00 ±0.30 4.00 1.75 0.45 40.40 16.00 8.71 10.05 21.73 mm
1.732 ±0.012 0.157 0.069 0.018 1.591 0.630 0.395 0.423 0.837 inches
44.00 ±0.30 4.00 1.75 0.45 40.40 16.00 10.04 10.75 21.25 mm
W
SM4
SM4C
HPC
SM1
SM2
SM3
-
-
Rev Date: 03/02/2016 16 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
1% Marking
The nominal resistance is marked on the
surface of the overcoating with the use
of 4 digit markings.
0201 and 0402 are not marked.
5% Marking
The nominal resistance is marked on the
surface of the overcoating with the use
of 3 digit markings.
0201 and 0402 are not marked.
Chip Resistors – Part Marking Instructions
Mark Instructions for 0603 1% Chip Resistor (per EIA-J)
A = 10
D = 10,000
X = 1
C = 1,000
F = 1,000,000
Y = 0.1
B = 100
E = 100,000
EXAMPLE:
1% #1% #1% #1% #1% #1% #
10.0 01 14.7 17 21.5 33 31.6 49 46.4 65 68.1 81
10.2 02 15.0 18 22.1 34 32.4 50 47.5 66 69.8 82
10.5 03 15.4 19 22.6 35 33.2 51 48.7 67 71.5 83
10.7 04 15.8 20 23.2 36 34.0 52 49.9 68 73.2 84
11.0 05 16.2 21 23.7 37 34.8 53 51.1 69 75.0 85
11.3 06 16.5 22 24.3 38 35.7 54 52.3 70 76.8 86
11.5 07 16.9 23 24.9 39 36.5 55 53.6 71 78.7 87
11.8 08 17.4 24 25.5 40 37.4 56 54.9 72 80.6 88
12.1 09 17.8 25 26.1 41 38.3 57 56.2 73 82.5 89
12.4 10 18.2 26 26.7 42 39.2 58 57.6 74 84.5 90
12.7 11 18.7 27 27.4 43 40.2 59 59.0 75 86.6 91
13.0 12 19.1 28 28.0 44 41.2 60 60.4 76 88.7 92
13.3 13 19.6 29 28.7 45 42.2 61 61.9 77 90.9 93
13.7 14 20.0 30 29.4 46 43.2 62 63.4 78 93.1 94
14.0 15 20.5 31 30.1 47 44.2 63 64.9 79 95.3 95
14.3 16 21.0 32 30.9 48 45.3 64 66.5 80 97.6 96
01B
01 means 10.0 and B = 100
10.0 x 100 = 1 K ohm
E96
25C
25 means 17.8 and C = 1,000
17.8 x 1,000 = 17.8 K ohm
93D
93 means 90.9 and D = 10,000
90.9 x 10,000 = 909 K ohm
Chip Marking
Explanation
Value
For shared E24/E96 values, 1% tolerance product may be marked with three digit marking instead of the standard four
digit marking for all other E96 values. All E24 values available in 1% tolerance are also marked with three digit marking.
Standard HVC is unmarked.
A two-digit number is assigned to each standard R-Value (E96) as shown in the chart below.
This is followed by one alpha character which is used as a multiplier. Each letter from “Y” “F” represents a
specific multiplier as follows:
Rev Date: 03/02/2016 17 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Stackpole/MIL Reference Tolerance
S±40% Series Tolerance
N±30% E12 ±10%
M±20% ±5%
K±10% ±2%
J±5% E96 ±1%
H±3% ±0.5%
G±2% ±0.25%
F±1% ±0.1%
D±0.5%
C±0.25%
B±0.1%
A±0.05%
T±0.01%
Stackpole Standard for Nominal Values & Tolerances
E24
Note: Non-standard ohmic values are available.
Consult factory for minimum order quantities
E192
General Product Information
Temperature Coefficient Codes
Tolerance Codes Resistance Values
Component Flammability
Stackpole TC Code MIL TC Code Industry Std TC Code Temperature Coefficient
MN/A -±300 ppm/ºC
LN/A T0 ±200 ppm/ºC
D D T1 ±100 ppm/ºC
C C T2 ±50 ppm/ºC
E E T9 ±25 ppm/ºC
SN/A T10 ±15 ppm/ºC
T N/A T13 ±10 ppm/ºC
YN/A T16 ±5 ppm/ºC
Product Type Polymer Type IEC 695-2-2 UL94V Rating Total Polymer Mass Oxygen Index
Carbon Films
CF18 (CFM14) Epoxy Meets Specification N/A 3 mg N/A
CF14 (CFM12) Epoxy Meets Specification N/A 15 mg N/A
CF12 Epoxy Meets Specification N/A 30 mg N/A
Metal Films
RNF18 (RNMF14) Epoxy Meets Specification N/A 3 mg N/A
RNF14 (RNMF12) Epoxy Meets Specification N/A 15 mg N/A
RNF12 Epoxy Meets Specification N/A 30 mg N/A
Metal Oxides
RSMF12 Silicone Meets Specification 94V-0 20 mg 46 - 48%
RSMF1 (RSF12) Silicone Meets Specification 94V-0 30 mg 46 - 48%
RSMF2 (RSF1) Silicone Meets Specification 94V-0 50 mg 46 - 48%
RSMF3 (RSF2) Silicone Meets Specification 94V-0 130 mg 46 - 48%
RSMF5 (RSF3) Silicone Meets Specification 94V-0 500 mg 46 - 48%
RSF5 Silicone 94V-0 400 mg 46 - 48%
Chip Resistors
RMCF Series
Boro-Silicated Acid Lead
Glass
Meets Specification 94V-0 N/A N/A
Chip Networks
RACF Series
Boro-Silicated Acid Lead
Meets Specification 94V-0 N/A N/A
RAVF Series
Boro-Silicated Acid Lead
Meets Specification 94V-0 N/A N/A
Rev Date: 03/02/2016 18 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Band Color Nominal Multiplier Tolerance (%)
Black 01 -
Brown 110 1
Red 2100 2
Orange 31K -
Yellow 410K -
Green 5100K 0.5
Blue 61,000K 0.25
Violet 7- -
Gray 8--
White 90.001 -
Silver -0.01 10
Gold -0.1 5
Band Precision General Purpose
Have three significant-figure bands, a multiplier band
and a tolerance band. Tolerances 1% or less.
Have two significant-figure bands, a multiplier band
and a tolerance band. Tolerances 2% or greater.
1st Band Nominal Nominal
2nd Band Nominal Nominal
3rd Band Nominal Multiplier
4th Band Multiplier Tolerance
5th Band Tolerance
Standard Color Codes
Standard Color Codes
Color Band Description
Rev Date: 03/02/2016 19 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Term Definition
Ambient temperature The ambient temperature is the temperature in the immediate environment of the resistor.
Carbon-composition Resistor with the resistance element formed by molding a body of carbon powder mixed with a phenolic binder.
Carbon-film Resistor whose resistance element is carbon film deposited on a ceramic core.
Climate category Indicates the lowest and the highest ambient temperature at which the resistors may be operated continuously.
Color-band or color code
Method of indicating value and tolerance on axial leaded resistors whose body is too small for legible alphanumerical
marking.
Critical resistance
The critical resistance (Rcrit) is the resistance that can be calculated from the rated dissipation Pv occurring under operating
voltage Vmax. A resistor of critical resistance will exhibit the largest drift in a style, because it is the highest value that may
carry the full rated power load.
Current noise Random low frequency electrostatic noise arising from current fluctuations in parallel with the resistor.
Current sensor A resistive device employed to sense levels of changes in current.
Derating
The power load capability of a resistor is limited by its permissible element temperature. Since the rated power dissipation is
referenced to a specific ambient temperature, higher ambient temperatures require a reduced permissible load, i.e., a
derating. The derating curve indicates the permissible power load as a function of the ambient temperature.
Dielectric strength (dielectric
withstanding voltage)
The ultimate breakdown voltage of the dielectric or insulation of the resistor when the voltage is applied between the case
and all terminals tied together. Dielectric strength is usually specified at sea level and simulated at high altitude air
pressures.
DIP Dual-in-line package resistor network.
E-series
Method of deriving nominal resistance values required for each tolerance level. The series E24 is comprised of 24 values
per decade and applies to 2% and 5% tolerances. The series E96 applies to 1% tolerance and E192 applies to 0.1%, 0.25%
and 0.5%.
Failure rate
The failure rate indicates the statistically established maximum rate of failures at a level of confidence of 60%. The figures
are derived from certified results of standard endurance tests after 1000 hours duration at the rated dissipation.
Film temperature
The temperature of the resistive film is considered in discussions about power rating and pulse load capability. The film
temperature determines the drift and stability of the resistor. For resistors that feature hot spots in the resistive film, the
higher temperature of the hot spot is to be considered. Since most resistors are covered with lacquer or protective coating,
only the surface temperature can be measured on the outside. However, the surface temperature is almost as high as the
film temperature.
Fixed resistors Resistors whose value is set in the manufacturing process.
Insulation resistance
The DC resistance measured between all terminals connected together and the case, exterior insulation, or external
hardware.
Kelvin connection
Four-terminal connection required in low-resistance measurements to eliminate the effects of contact resistance and lead
resistance, as well as the effects of lead temperature, providing accurate measurements. Invented by Lord Kelvin in the 19th
Century.
Resistor Glossary
Rev Date: 03/02/2016 20 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
Term Definition
Maximum working voltage
The maximum voltage stress (DC or rms) that may be applied to the resistor (resistance element). A function of
the materials used, the required performance, and the physical dimensions.
Metal oxide
Resistor whose resistance element is a thick film ruthenium oxide paste deposited on a cylindrical ceramic core
by means of dipping or spiral-coating.
Operating voltage
The limiting element voltage Vmax is the maximum voltage that may be applied continuously to the resistor,
provided its resistance value is equal to or higher than the critical resistance. The limit applies to DC voltages
and to AC rms voltage of undistorted sinusoidal shape.
Power rating
Maximum power in still air that will limit the resistor internal hot-spot temperature to a satisfactory level. Power
ratings must be reduced as the temperature rises, so derating curves or charts are published. These
parameters are application-dependent.
Pulse load capability
The pulse load capability of a resistor is its ability to withstand transient loads that considerably exceed the rated
dissipation with its peak value.
Resistance temperature
characteristic (coefficient)
The magnitude of change in resistance due to temperature, expressed in percent or degree centigrade or parts-
per-million per degree centigrade (PPM/C). If the resistance changes are linear over the specified temperature
range, the parameter is known as the temperature "coefficient". This assumption of linearity is usually made in
order to ease calculations.
Resistance tolerance
The permissible deviation of the manufactured resistance value (express in percent) from the specified nominal
resistance value at standard or stated environmental conditions.
Resistor A device that converts electrical energy to thermal energy according to Ohm's Law.
Shunt A resistive device employed to divert most of the current in an electric circuit.
SIP Single-in-line package resistor network.
SMD Surface mount devices. Chips and chip arrays are examples.
Solderability Property of the termination to accept new solder in a soldering process.
Stability
Ability of a resistor to maintain its initial resistance value of extended periods of time when subjected to any
combination of electrical stresses and environmental conditions.
Temperature rise Thermal resistance that impedes the dissipation of heat from the resistor.
Thick-film
Resistor whose resistance element consists of a ruthenium oxide (also called cermet) screen printed onto a
ceramic substrate and fired at a high temperature.
Variable resistors Resistors whose value can be adjusted (trimmed) by the user, typically by means of a dial.
Voltage coefficient
A resistor has a voltage coefficient if measurements of resistance with different voltages yield different results.
The voltage coefficient is the quotient of the relative difference in resistance and the difference of measuring
voltage.
Wirewound
Resistor whose resistance element consists of a wire (nickel-chromium, copper-nickel, or gold-platinum) wound
around a bobbin or core.
Zero-ohm resistors Jumpers that are manufactured into resistor bodies for ease of insertion by the user.
Resistor Glossary
(cont.)
Rev Date: 03/02/2016 21 www.seielect.com
This specification may be changed at any time without prior notice marketing@seielect.com
Please confirm technical specifications before you order and/or use.
Stackpole Electronics, Inc.
Resistive Product Solutions
Packaging and Technical Information
EIA Standard Resistor Values

Products

RES 0 OHM JUMPER 1/16W 0402
Available Quantity604704
Unit Price0.1
RES 0 OHM JUMPER 1/4W 1206
Available Quantity104067
Unit Price0.1
RES 1K OHM 1/4W 5% AXIAL
Available Quantity1604211
Unit Price0.1
RES 10K OHM 1/4W 5% AXIAL
Available Quantity982813
Unit Price0.1
RES 10K OHM 1/8W 5% CF AXIAL
Available Quantity703155
Unit Price0.1
RES 1K OHM 1/8W 5% CF AXIAL
Available Quantity464886
Unit Price0.1
RES 10K OHM 1/4W 1% AXIAL
Available Quantity292719
Unit Price0.1
RES 1K OHM 1/4W 1% AXIAL
Available Quantity197300
Unit Price0.1
RES 0 OHM JUMPER 1/2W 1210
Available Quantity1276223
Unit Price0.12
RES 10K OHM 0.5% 1/8W 0805
Available Quantity315546
Unit Price0.17
RES 0 OHM JUMPER 3/4W 2010
Available Quantity273522
Unit Price0.24
RES 0 OHM JUMPER 1W 2512
Available Quantity295559
Unit Price0.31
RES 100 OHM 5% 1W 2512
Available Quantity294706
Unit Price0.31
RES 47 OHM 5% 1W 2512
Available Quantity168316
Unit Price0.31
RES 2.7 OHM 5% 1W 2512
Available Quantity104077
Unit Price0.31
RES 1K OHM 5% 1W 2512
Available Quantity28825
Unit Price0.31
RES 10K OHM 0.1% 1/16W 0402
Available Quantity58567
Unit Price0.42
RES 0.75 OHM 1% 1/2W 1206
Available Quantity18547
Unit Price0.42
RES 0.13 OHM 1% 1/2W 1206
Available Quantity69785
Unit Price0.47
RES 0 OHM JUMPER 1/4W 0603
Available Quantity247941
Unit Price0.54