Desk-Top Cases Catalog

Schroff

View All Related Products | Download PDF Datasheet

Datasheet

SCHROFF GMBH, LANGENALBER STRASSE 96100, D75334 STRAUBENHARDT WWW.PENTAIREQUIPMENTPROTECTION.COM
Main Catalog 24th Edition
Main Catalog
24TH EDITION | OCTOBER 2012
39601-641 © 2012 Pentair Equipment Protection
EquipmEnt protEction SolutionS
18002_Hauptkatalog_Schroff_Umschlag_AK03_EN.indd 1 10.10.2012 11:15:02
04 Desk-top cases .
Desk-top cases
Overview . . . . . 0
Cabinets . . . . . . 1
Wall mounted
cases . . . . . . . . 2
Accessories for
cabinets and wall
mounted cases 3
Climate control 4
Desk-top cases 5
Subracks/
19" chassis . . . 6
Front panels,
plug-in units . . 7
Systems . . . . . . 8
Power supply
units . . . . . . . . . 9
Backplanes . . 10
Connectors, front
panel component
system . . . . . . 11
Appendix . . . . 12 Downloads und weitere wichtige Informationen finden Sie
im Internet unter www.schroff.biz
5.0 Main Catalogue
E 10/2012
Main Catalo gue
PROLINE
Y
The universal case with 19" compatible
dimensions e.g. for CompactPCI and VME64x
applications
- Aluminium case
- Height 2 ... 7 U
- High EMC shielding
i
The robust case for 19" compatible or custom
electronics assemblies
- Aluminium case with aluminium frame front
- Height 2 ... 6 U
- High EMC shielding
361009005 (12304003 10005004 05802001 06803006 05809001)
5_00_Gehäuse_overview_e.fm Seite 0 Mittwoch, 12. September 2012 8:04 08
Desk-top cases
5.1
Main Catalogue
E 10/2012
Main Catalogue
Accessories
b
Desk-top or portable case
Design alternative to propacPRO
- Front and rear frame in aluminium
- Aluminium case
- Height 2 ... 6 U
- For 19" components or individual electronics
assemblies
J
Case to house
19" subracks or 19" chassis
- Case with aluminium frame to
front and rear
- High stability
- Height 3 ... 12 U
- Identical front and rear
- Internal mounting up to 40 kg
- Protection class IP 20
36109006 (02004001 02202003 05806006 02992004 05806008)
MicroTCA
Overview . . . . 5.0
Introduction . . 5.2
ServicePLUS . . 5.4
ratiopacPRO . . 5.6
propacPRO . . . 5.44
compacPRO . . 5.76
comptec . . . . . . 5.100
Accessories
Handles . . . . . . . . 5.108
Strap handles . . . 5.111
Tip-up carrying
handles . . . . . . . . 5.112
Folding handles 5.113
Tray handles . . . 5.114
Feet . . . . . . . . . . 5.115
ServicePLUS . . 5.4
5_00_Gehäuse_overview_e.fm Seite 1 Mittwoch, 12. September 2012 8:04 08
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.2 Main Catalogue
E 10/2012
Desk-top cases – Introduction
IntroductionMain CataloguePart number in bold face type: ready fo r despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
Desk-top enclosures
Our desk-top cases are used to house PCBs (euroboards) or
individual components
The choice is yours:
쮿ratiopacPRO, the universal case with 19" compatible
dimensions and high EMC shielding,
e.g. for CompactPCI and VME64x applications
쮿propacPRO, the robust case with high EMC shielding for
19"-compatible or custom electronics assemblies
쮿compacPRO, Desk-top or portable case for unshielded
applications
19" cases
Our comptec cases are comparable with small cabinets and are
used to house 19" components such as subracks, 19" fan trays
or 19" front panels
All desk-top enclosures have a very low weight owing to the
materials used and are also suitable for mobile use
Main CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
The most important user domains for desk-top enclosures are:
쮿Fitting with euroboards in accordance with IEC 60297
쮿Fitting with individual electrical or mechanical components,
e.g.on mounting plates
Main CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿Practical technology without time-consuming assembly. The
modular product platform of these cases allows a wide range
of possible uses with only a small number of components.
The intelligent design of all components results in an
astonishingly quick and easy assembly of the components.
With our PRO product platform we offer you full compatibility
of all individual components and accessories, also with our
europacPRO subracks.
Standard desk-top enclosures can also be adapted easily and
with little effort for mobile applications.
Case types: Desk-top enclosure/19" case
01810002 02202004
Desk-top enclosure,
ratiopacPRO 19" case, comptec
Applications for desk-top enclosures
02004079 05809004 05809004
Example above: for euroboards, below: for individual installation
One product platform and extensive accessories
05806008 05806006
02005003 02005006
5_00_Gehäuse_overview_e.fm Seite 2 Mittwoch, 12. September 2012 8:04 08
5.3
Desk-top cases – Introduction
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
IntroductionMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
Supplied in space-saving packs. Simply unpack parts and screw
together - done.
Depending on the kit chosen the threaded insert, the perforated rail
or the EMC gasket is pre-assembled on the horizontal rail.
We offer you three forms of delivery:
쮿Pre-assembled kit for use with 160 mm deep euroboards,
frame fitted, cladding parts and guide rails supplied loose.
쮿Pre-assembled kit for individual configuration, frame
assembled, cladding parts supplied loose.
쮿Ready assembled cases to your specifications. With our
ServicePLUS option you can order ready-assembled cases,
with drilled holes and cut-outs and individual front panels -
if necessary even by express service.
Main CataloguePart number in bold face type: ready for despa tch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿Guide rails form the interface between the mechanics of the
case and the electronics assembled (PCBs, plug-in units, frame
type plug-in units, drive unit modules, etc.).
Robust snap-in fixings on the plastic rails assure that the
components are held securely, even when exposed to
vibrations.
Guide rails can also be screwed on.
Main CataloguePart number in bold face type: ready for despa tch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿Our case product platforms offer standard solutions for
achieving electromagnetic compatibility (EMC) and to avoid
electrostatic interference (ESD)
쮿Shielding on the front and rear of the case is effected by front
panels with EMC gaskets
쮿To prevent electrostatic discharge when inserting PCBs, ESD
contacts are clipped into the guide rails. These provide a
conductive connection between board and case earth/ground
쮿Test reports are available on our website www.schroff.biz for
download
Forms of delivery for desk-top enclosures
06104001
Flat pack delivery to save space
Guide rail
06108084
8381797775731
13579
11
EMC and ESD
06108081
Shielding
04503050
Position of the ESD clip
30
0
20
40
60
80
100
120
dB
400 800 1200 1600 2000
Mhz
5_00_Gehäuse_overview_e.fm Seite 3 Mittwoch, 12. September 2012 8:04 08
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.4 Main Catalogue
E 10/2012
Desk-top cases – ServicePLUS
ServicePLUSMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
configuration Simple. Fast. For the product you want.
Components can be varied and combined
freely
쮿Online configuration: www.schroff.co.uk/configuration
assembly Assembled by professionals. Double benefit!
Fitting of all mechanical, electrical and
electronic components by our specialists
쮿Professional and reliable, without extra costs
쮿Ready for despatch within 10 working days
modification Small changes. Large impact.
Custom drillings, cut-outs and special colours
for off-the-shelf products
쮿CAD data are available for you to download and further modify
from our website www.schroff.biz
쮿Ready for despatch within 10 working days
solution Simple. Fast. From one source.
Integration and custom developments 쮿Flowtherm simulation to calculate heat paths; verification in our
own climate lab
쮿Special sizes, custom solutions
express When fast has to be faster.
Delivery time to customer's request 쮿ServicePLUS assembly ready for despatch within 10 working
days
쮿ServicePLUS modification and ServicePLUS solution ready for
despatch within 15 working days
academy Knowledge. Sharing. Partnerships.
Knowledge transfer and partnership 쮿Seminars held centrally or at your site.
쮿CAD drawings, test reports, user manuals
5_00_Gehäuse_overview_e.fm Seite 4 Mittwoch, 12. September 2012 8:04 08
5.5
Desk-top cases – ServicePLUS
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Tex t
Application examples
01809001 01809003
Application: ratiopacPRO-air case in special colour,
shielded board cage, filter mat top and bottom Application: ratiopacPRO-air case with processed
front and rear panels
02009001 02009003
Application: compacPRO case, modified Application: compacPRO case with fitted horizontal rail
with lip and hinged front panel
02009002 02009004
Application: compacPRO case with fitted horizontal rail
with lip and folding front panel Application: compacPRO with tip-up carrying handle and
front panel (without visible screws)
02109001 05809005
Application: inpac case with hinged and modified
front and rear panels Application: propacPRO, EMC case in special colour with
mounting plates for individual construction
5_00_Gehäuse_overview_e.fm Seite 5 Mittwoch, 12. September 2012 8:04 08
Desk-top cases – Y
Overview . . . . . 0
Cabinets . . . . . . 1
Wall mounted
cases . . . . . . . . 2
Accessories for
cabinets and wall
mounted cases 3
Climate control 4
Desk-top cases 5
Subracks/
19" chassis . . . 6
Front panels,
plug-in units . . 7
Systems . . . . . . 8
Power supply
units . . . . . . . . . 9
Backplanes . . 10
Connectors, front
panel component
system . . . . . . 11
Appendix . . . . 12 Downloads and further important information can be found
on the Internet under www.schroff.biz
5.6 Main Catalogue
E 10/2012
YMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
06800002
06801005
ratiopacPRO
Designed for insertion/extractor handles in accordance with
IEC 60297-3-102 and IEEE 1101.10 for CompactPCI and
VME64x applications
ratiopacPRO air
Designed for insertion/extractor handles in
accordance with IEC 60297-3-102 and
IEEE 1101.10 for CompactPCI and VME64x
applications; 1 U extra for ventilation
(1/2 U top, 1/2 U bottom)
Standards
쮿Inner and outer dimensions in accordance with:
IEC 60297-3-101 / IEEE 1101.1
IEC 60297-3-102 / IEEE 1101.10/11
쮿Type of protection IP20 in accordance with
IEC 60529
쮿Earthing connections in accordance with:
DIN EN 50178 / VDE 0160
DIN EN 60950 / VDE 0805
DIN EN 61010-1 / VDE 0411 part 1
DIN EN 61010-1A2 / VDE 0411 part 1/A1
쮿EMC testing in accordance with
VG 95373 part 15
06812001 06800015
Case with mounting plate Prepared for CompactPCI and
VME64x applications
5_1_ratiopacPRO_e.fm Seite 6 Montag, 17. September 2012 7:04 19
Desk-top cases – Y
5.7
Main Catalogue
E 10/2012
YMain Catalogue
The universal case with 19" compatible dimensions
e.g. for CompactPCI, VME64x and other applications
쮿Base level of shielding in basic versions upwards,
additional EMC shielding can be retrofitted
쮿Symmetrical construction, identical front and rear
(identical board cage for ratiopacPRO and ratiopacPRO air)
쮿Converts simply from desktop to 19" rack-mounted case and back
쮿No visible screws; cladding parts removable without tools
ratiopacPRO
쮿Case with cover strip, front handles or 19" brackets
(height 2 U ... 6 U)
쮿Complete case with cover strip and pre-mounted components,
with basic shielding (height 3 U, 6 U), additional EMC shielding
retrofittable
쮿Tower case (width 4 U)
ratiopacPRO air
쮿ratiopacPRO air with additional 1 U height for ventilation
쮿Case with cover strips, front handles or 19" brackets (height 4
U, 5 U, 7 U)
쮿Complete case with cover strips and pre-mounted
components, with basic shielding (height 4 U, 7 U),
additional EMC shielding retrofittable
06800005
06800005
ServicePLUS from page 5.4
e.g. modifications (special colours or sizes)
e.g. custom solutions (cut-outs in top cover,
base plate or side panels)
e.g. assembly service from 1 piece
www.schroff.biz/ServicePLUS
30407004
MicroTCA
Overview . . . . 5.6
ratiopacPRO
Complete cases . 5.8
Dimensions . . . . . 5.9
Cases . . . . . . . . . . 5.10
Tower cases . . . . 5.12
ratiopacPRO air
Cases . . . . . . . . . 5.14
Complete cases . 5.13
Dimensions . . . . . 5.16
Radial fan units . 5.17
EMC gasketing . . 5.18
Accessories
Front panels . . . . 5.21
Rear panels . . . . . 5.22
Feet . . . . . . . . . . . 5.23
Air filters . . . . . . . 5.23
GND/earthing kit 5.24
Front handles . . . 5.24
19" brackets . . . . 5.25
Cable holder. . . . 5.26
Compartment
seals. . . . . . . . . . . 5.26
Strap handles . . . 5.26
Tip-up carrying
handles . . . . . . . . 5.27
Assembly kit. . . . 5.28
Fitting position
of horizontal rails
. . . . . . . . . . . 5.29
Horizontal rails. . 5.31
Threaded
inserts,
perforated strips,
insulation strips . 5.35
Z-rails,
perforated rails. . 5.35
Divider plates . . . 5.36
Mounting plates . 5.37
Horizontal board
assembly . . . . . . 5.38
Combined
mounting . . . . . . 5.39
Guide rails and
ESD clips . . . . . . 5.40
ServicePLUS . . 5.4
5_1_ratiopacPRO_e.fm Seite 7 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.8 Main Catalogue
E 10/2012
Desk-top cases – Y
YMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿Desk-top enclosure with pre-configured components, in
accordance to IEC 60297-3-101; prepared for 19" components,
e.g. plug-in units and euroboards
쮿Ventilation slit in base plate
쮿Rear panel perforated
Delivery comprises (in kit form)
Order Information
Note
쮿Dimension drawings and mounting depths see page 5.9
쮿Components see page 5.18
쮿Front handles and 19" mounting brackets from page 5.24
쮿Guide rails from page 5.40
ratiopacPRO complete cases
06812003
01802050
01808055
01808051
3 U
01808052
6 U
ServicePLUS see page 5.4
499
7
77
816 56
“X” “Y” “Z”
D-20
D
W - 21.4
W
7.5 H
AA-A
A
D-20
D
W - 21.4
W
7.5
AA-A
A
H
Item Qty Description
without
EMC with
EMC
122Side panel, AI, 2 mm, passivated
2 2 2 Side plate, Al, 1 mm, visible surfaces RAL 9006
344Cover strip, Al die-cast, RAL 7016, pre-fitted
only on EMC version
4 4 4 Horizontal rail, type H-LD, Al, visible surfaces
RAL 7016
522Horizontal rail, centre (top/bottom), type H-ST, Al
6 1 1 Horizontal rail, centre (on 6 U only), type ST, Al
76/8 6/8 3 U/6 U: threaded inserts, St, pre-mounted,
for indirect backplane mounting with insulation
strips
8 4 Perforated strip, Al, 1 mm, pre-fitted
944Insulation strip, PBT, UL 94 V-0
10 1 1 Rear panel, perforated, Al, 2.5 mm
11 22Top cover and base plate, Al, 1 mm, internal
surfaces conductive, visible surfaces RAL 9006,
with GND/earthing connection,
base plate with honeycomb grid ventilation
12 4 4 Case foot with anti-slip protection, UL 94 V-0,
PC black
14 –1EMC support profile for side panel,
pre-mounted (kit)
15 4 EMC contact strip for cover plate,
pre-mounted (kit)
16 –4EMC contact strip front panel - horizontal rails
17 1 1 GND/earthing kit, assembly kit
Height H Width W Depth D Unshielded EMC
shielded
U HP mm Part no. Part no.
328 255.5 24572-001 24572-050
3 42 255.5 24572-002 24572-051
342 315.5 24572-003 24572-052
3 63 315.5 24572-004 24572-053
384 315.5 24572-005 24572-054
3 84 375.5 24572-006 24572-055
384 435.5 24572-007 24572-056
6 42 315.5 24572-015 24572-064
663 315.5 24572-016 24572-065
6 84 315.5 24572-017 24572-066
684 375.5 24572-018 24572-067
6 84 435.5 24572-019 24572-068
5_1_ratiopacPRO_e.fm Seite 8 Montag, 17. September 2012 7:04 19
5.9
Desk-top cases – Y
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 11/2013
Tex t
Dimension drawings ratiopacPRO
rppr6637
RatiopacPRO with A - bezel; B - front handle; C - 19" mounting bracket; D - 19" mounting bracket with front handle
Dimensions table ratiopacPRO
Height Width Depth
H h w W w1 w2 w D d D1 d2
in U in mm in mm in HP in mm in mm in mm in mm Total depth
in mm Useable depth
in mm Plug-in depth
in mm Board depth
in mm
288.10 67.90
28 164.42 177.62 198.12 142.82 255.5 235.5 175.5 160
42 235.54 248.74 269.24 213.94 235.5 220
63 342.42 355.42 375.92 320.62
315.5 295.5
175.5 160
84 448.90 462.10 482.60 427.30 235.5 220
3 132.55 112.35
28 164.42 177.62 198.12 142.82 295.5 280
42 235.54 248.74 269.24 213.94
375.5 355.5
175.5 160
63 342.42 355.42 375.92 320.62 235.5 220
84 448.90 462.10 482.60 427.30 295.5 280
4177.00 156.80
28 164.42 177.62 198.12 142.82 355.5 340
42 235.54 248.74 269.24 213.94
435.5 415.5
175.5 160
63 342.42 355.42 375.92 320.62 235.5 220
84 448.90 462.10 482.60 427.30 295.5 280
5 221.45 201.25
28 164.42 177.62 198.12 142.82 355.5 340
42 235.54 248.74 269.24 213.94
495.5 475.5
175.5 160
63 342.42 355.42 375.92 320.62 235.5 220
84 448.90 462.10 482.60 427.30 295.5 280
6265.90 245.70
28 164.42 177.62 198.12 142.82 355.5 340
42 235.54 248.74 269.24 213.94
63 342.42 355.42 375.92 320.62
84 448.90 462.10 482.60 427.30
Components mountable in 15 mm depth grid
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.10 Main Catalogue
E 11/2013
Desk-top cases – Y
YMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿Cases for individual assembly with 19" standard components or
specific internal mounting, e.g. with mounting plate
쮿Unshielded (EMC shielding retrofittable)
쮿Symmetrical design, identical front and rear side
쮿Four versions:
– Bezels
Front handles
19" mounting brackets
19" mounting brackets with front handles
쮿For board depth 160 mm, 220 mm, 280 mm, and 340 mm
(depending on case depth)
Delivery comprises (kit)
3a, 3b, 3c or 3d according to selection
Note
쮿Order information, see following page
Order Information
RatiopacPRO case
01805050 01805051 01805052 01813051
3a: Bezel 3b: Front handle 3c: 19" mounting
bracket 3d: 19" mounting
bracket with front
handle
01813065
Drawing with front cover strip
ServicePLUS see page 5.4
12
11
11
4
2
3a (3b/3c/3d)
1
3
Item Qty Description
1 2 Side panel, AI, 2 mm, chromated
2 2 Side plate, Al, 1 mm, visible surfaces powder-coated,
RAL 9006
3 2 Rear trim, Al die-cast, powder-coated, RAL 7016
3a 2 Bezel, Al die-cast, powder-coated, RAL 7016
3b 2Front handle, Al die-cast, powder-coated, RAL 7016
3c 2 19" mounting bracket, Al diecast, powder-coated,
RAL 7016
3d 219" mounting bracket with front handle, Al diecast,
powder-coated, RAL 7016
4 4 Horizontal rail, type H-LD, Al, visible surfaces powder-
coated, RAL 7016
11 2Top cover and base plate, Al, 1 mm, inner sides
conductive, visible surfaces powder-coated, RAL 9006,
with GND/earthing connections, base plate with
honeycomb grid ventilation
12 4 Case foot with anti-slip protection, UL 94 V-0, PC black
13 1Fixing materials kit
Accessories
Earthing kit CU wire, 1.5 mm2, PVC sleeve, green/yellow,
1 kit 24571-380
Al diecast foot with tip-up silver, 1 piece (SPQ 10) 10603-002
Plastic tip-up foot silver, similar to RAL 9006, PU
4pieces 20603-001
Plastic tip-up foot anthracite, similar to RAL 7016,
4pieces 20603-002
Stacking aid silver, similar to RAL 9006, PA, UL 94 V-0,
PU 4 pieces 20603-004
Stacking aid anthracite, similar to RAL 7016, PA,
UL 94 V-0, PU 4 pieces 20603-003
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5.11
Desk-top cases – Y
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 11/2013
Note
쮿Dimension drawings and mounting depths see page 5.9
쮿Components see page 5.18
RatiopacPRO case
Width
WDepth
DCase height H
2U
HP mm Part no. Part no. Part no. Part no. Part no.
Side panel subdivision
(1 U-3 U-1 U) (3 U-2 U)
Cover strips 28 255.5
24572-500 24571-002 24571-050 24572-117 24572-261 24571-098
28 315.5
24572-503
24571-005
24571-053 24572-120 24572-264 24571-101
42 255.5
24572-510
24571-014
24571-062 24572-129 24572-273 24571-110
42 315.5 24572-513 24571-017
24571-065 24572-132 24572-276 24571-113
42 255.5
24572-514 24571-018 24571-066 24572-133 24572-277 24571-114
63 255.5
24572-520 24571-026 24571-074 24572-141 24572-285 24571-122
63 315.5
24572-523
24571-029
24571-077 24572-144 24572-288 24571-125
63 375.5
24572-524
24571-030
24571-078 24572-145 24572-289 24571-126
84 255.5
24572-530 24571-038 24571-086 24572-153 24572-297 24571-134
84 315.5
24572-533
24571-041
24571-089 24572-156 24572-300 24571-137
84 375.5
24572-534
24571-042
24571-090 24572-157 24572-301 24571-138
84 435.5
24572-535
24571-043 24571-091
24572-158 24572-302 24571-139
RPPR6629 84 495.5
24572-536 24571-044 24571-092 24572-159 24572-303 24571-140
Front handles 28 255.5 24571-702
24571-750 24572-213 24572-357 24571-798
28 315.5
24571-705 24571-753 24572-216 24572-360 24571-801
42 255.5 24571-714
24571-762 24572-225 24572-369 24571-810
42 315.5 24571-717
24571-765 24572-228 24572-372 24571-813
42 375.5
24571-718 24571-766 24572-229 24572-373 24571-814
63 255.5
24571-726 24571-774 24572-237 24572-381 24571-822
63 315.5 24571-729
24571-777 24572-240 24572-384 24571-825
63 375.5
24571-730 24571-778 24572-241 24572-385 24571-826
84 255.5
24571-738 24571-786 24572-249 24572-393 24571-834
84 315.5 24571-741
24571-789 24572-252 24572-396 24571-837
84 375.5 24571-742
24571-790 24572-253 24572-397 24571-838
84 435.5
24571-743
24571-791
24572-254 24572-398 24571-839
01805050 84 495.5
24571-744 24571-792 24572-255 24572-399 24571-840
19" mounting brackets 84 255.5
24572-570
24571-438 24571-486
24572-201 24572-345 24571-534
84 315.5 24572-573 24571-441
24571-489 24572-204 24572-348 24571-537
84 375.5 24572-574 24571-442
24571-490 24572-205 24572-349 24571-538
84 435.5 24572-575 24571-443 24571-491
24572-206 24572-350
24571-539
01805052
84 495.5
24572-576 24571-444
24571-492
24572-207 24572-351 24571-540
19" mounting brackets
with front handles 84 255.5
24572-620
24572-630 24572-640 ––
24572-660
84 315.5 24572-623 24572-633 24572-643 24572-663
84 375.5 24572-624 24572-634 24572-644 ––
24572-664
84 435.5 24572-625 24572-635 24572-645 24572-665
01813051
84 495.5
24572-626
24572-636 24572-646 ––
24572-666
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.12 Main Catalogue
E 10/2012
Desk-top cases – Y
06802001
01802054
1) = open space between the horizontal rails
2) = max. mounting depth
Y
쮿Symmetrical design, identical front and rear side
쮿Mounting space 4 U, 84 HP, depth 475 mm
쮿Case based on ratiopacPRO
쮿Unshielded (EMC shielding retrofittable)
Delivery comprises (in kit form)
Order Information
Note
쮿Components see page 5.18
ratiopacPRO tower with 4 U width
ServicePLUS see page 5.4
4
4
6
3
1
5
2
3
475.5156,8
2)
495.5
177
1)
221,5
448.7
462.25
427.3
Item Qty Description
1 2 Base/top cover, Al, 2 mm, passivated
2 4 Horizontal rail, type H-LD, Al, visible surface powder-
coated, RAL 7016
3 4 Cover, Al die-cast, RAL 7016
4 2 Lateral cover plate, Al, 1 mm, with GND/earthing
connection, visible surfaces powder-coated, internal
surface conductive, RAL 9006
5 1 Top cover plate, Al, 1 mm, visible surface powder-coated,
RAL 9006
6 2 Case foot with anti-slip protection, Al, powder-coated,
RAL 7016
7 1 Assembly kit
Width Part no.
U
4
24571-395
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_1_ratiopacPRO_e.fm Seite 12 Montag, 17. September 2012 7:04 19
5.13
Desk-top cases – Yair
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
airY
쮿The case has 2 x 1/2 U clearance for ventilation
쮿Case with cover strip; with pre-mounted components for
euroboards and backplane with insulation strip; no visible
screws
쮿Symmetrical design, identical front and rear honeycomb grid
ventilation in top cover and base plate
쮿Available in two versions:
unshielded (EMC shielding retrofittable)
with EMC shielding fitted
Delivery comprises (in kit form)
Order Information
Note
쮿Dimension drawings and mounting depths see page 5.16
쮿Components see page 5.18
쮿Front handles and 19" mounting brackets from page 5.24
쮿Guide rails from page 5.40
ratiopacPRO air complete cases
06811001
01802052
01808055
01808053
3 U
01808054
6 U
ServicePLUS see page 5.4
12
13
11
15
“X”
“Y”
“Z”
13
10
6, 7, 9
5, 7, 9
4, 7, 8, 16
2
3
1
15
14
17
11
499
7
77
816 56
“X” “Y” “Z”
D
w
7.5
h
H
AA-A
A
D
w
7.5
AA-A
A
h
H
Item Qty Description
without
EMC with
EMC
1 2 2 Side panel, AI, 2 mm, passivated
2 2 2 Side plate, Al, 1 mm, visible surface RAL 9006
3 4 4 Cover, die-cast zinc, RAL 7016, pre-mounted on
EMC version only
4 4 4 Horizontal rail, type H-LD, Al,
visible surface RAL 7016
5 2 2 Horizontal rail, centre (top/bottom), type H-ST, Al
6 1 1 Horizontal rail, centre (on 6 U only), type ST, Al
76/8 6/8 4 U/7 U: threaded inserts, St, pre-mounted,
for indirect backplane mounting with insulation strips
8 4 Perforated strip, pre-mounted
9 4 4 Insulation strip, PBT, UL 94 V-0
10 1 1 Rear panel, Al, 2.5 mm
11 2 2 Top cover and base plate with honeycomb grid
ventilation, Al, 1 mm, internal surface conductive,
visible surface RAL 9006, with GND/earthing
connection
12 4 4 Case foot with anti-slip protection, UL 94 V-0,
PC, black
13 2 2 Air filter
14 1 EMC support profile for side panel, fitted (kit)
15 4 EMC contact strip for cover plate, pre-mounted (kit)
16 4 EMC contact strip front panel - horizontal rails
17 1 1 Compartment seal, PE foam, self-adhesive,
temperature range -20 °C ... +85 °C
18 1 1 GND/earthing kit, assembly kit
Case
height H PCB height h Width
wDepth
DUnshielded EMC
shielded
UU HPmmPart no.Part no.
4 3 28 255.5 24572-025 24572-074
4 3 42 255.5 24572-026 24572-075
4 3 42 315.5 24572-027 24572-076
4 3 63 315.5 24572-028 24572-077
4 3 84 315.5 24572-029 24572-078
4 3 84 375.5 24572-030 24572-079
4 3 84 435.5 24572-031 24572-080
7 6 42 315.5 24572-040 24572-088
7 6 63 315.5 24572-041 24572-089
7 6 84 315.5 24572-042 24572-090
7 6 84 375.5 24572-043 24572-091
7 6 84 435.5
24572-044
24572-092
5_1_ratiopacPRO_e.fm Seite 13 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.14 Main Catalogue
E 11/2013
Desk-top cases – Yair
airY
쮿The case has 2 x 1/2 U clearances for ventilation beneath and
above the board cage
쮿Cases for individual assembly with 19" standard components or
specific internal mounting, e.g. with mounting plate
쮿Unshielded (EMC shielding retrofittable)
쮿Symmetrical design, identical front and rear side
쮿For board depth 160 mm, 220 mm, 280 mm, and 340 mm
(depending on case depth)
쮿Online download of 3D CAD data
쮿Four versions:
– Bezels
Front handles
19" mounting brackets
With 19" mounting brackets and front handles
Delivery comprises (in kit form)
3a, 3b, 3c or 3d according to selection
Note
쮿Order information see following page
Order Information
RatiopacPRO air case
06801005
01805055 01805056 01805057 01813057
3a: Bezel 3b: Front handle 3c: 19" mounting
bracket 3d: 19" mounting
bracket with front
handle
01813066
Drawing with front cover strip
ServicePLUS see page 5.4
12
13
11
11
13
4
2
3a (3b/3c/3d)
3
1
Item Qty Description
1 2 Side panel, AI, 2 mm, chromated
2 2 Side plate, Al, 1 mm, visible surfaces powder-coated,
RAL 9006
3 2 Rear trim, Al die-cast, powder-coated, RAL 7016
3a 2 Bezel, Al die-cast, powder-coated, RAL 7016
3b 2Front handle, Al die-cast, powder-coated, RAL 7016
3c 2 19" mounting angle, Al die-cast, powder-coated,
RAL 7016
3d 219" mounting bracket with front handle, Al diecast,
powder-coated, RAL 7016
4 4 Horizontal rail, type H-LD, Al, visible surfaces powder-
coated, RAL 7016
11 21 Top cover and base plate, Al, 1 mm, internal surfaces
conductive,visible surfaces powder-coated, RAL 9006,
with
GND/earthing connection, top cover and base plate with
ventilation comb
12 4 Case foot with anti-slip protection, UL 94 V-0, PC black
13 2Air filters
14 1 Fixing materials kit
Accessories
Earthing kit CU wire, 1.5 mm2, PVC sleeve, green/yellow,
1 kit 24571-380
Al diecast foot with tip-up silver, 1 piece (SPQ 10) 10603-002
Plastic tip-up foot silver, similar to RAL 9006, PU
4pieces 20603-001
Plastic tip-up foot anthracite, similar to RAL 7016,
4pieces 20603-002
Stacking aid silver, similar to RAL 9006, PA, UL 94 V-0,
PU 4 pieces 20603-004
Stacking aid anthracite, similar to RAL 7016, PA,
UL 94 V-0, PU 4 pieces 20603-003
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5.15
Desk-top cases – Yair
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 11/2013
Note
쮿Dimension drawings and mounting depths see page 5.16
쮿Components see page 5.18
RatiopacPRO air case
Width W Depth D Case height H
4 U 5 U 7 U
PCB height h
HP mm Part no. Part no. Part no.
Bezels 28 255.5
24571-146 24571-194 24571-242
28 315.5
24571-149 24571-197 24571-245
42 255.5
24571-158 24571-206 24571-254
42 315.5
24571-161
24571-209
24571-257
42 375.5
24571-162 24571-210 24571-258
63 255.5
24571-170 24571-218 24571-266
63 315.5
24571-173 24571-221 24571-269
63 375.5
24571-174 24571-222 24571-270
63 435.5
24571-175 24571-223 24571-271
84 255.5
24571-182 24571-230 24571-278
84 315.5
24571-185 24571-233 24571-281
84 375.5
24571-186 24571-234 24571-282
84 435.5
24571-187 24571-235 24571-283
01805055 84 495.5
24571-188 24571-236 24571-284
Front handles 28 255.5
24571-846 24571-894 24571-942
28 315.5
24571-849 24571-897 24571-945
42 255.5
24571-858 24571-906 24571-954
42 315.5
24571-861 24571-909 24571-957
42 375.5
24571-862 24571-910 24571-958
42 435.5
24571-863 24571-911 24571-959
63 315.5
24571-873 24571-921 24571-969
63 375.5
24571-874 24571-922 24571-970
63 435.5
24571-875 24571-923 24571-971
84 255.5
24571-882 24571-930 24571-978
84 315.5
24571-885 24571-933 24571-981
84 375.5
24571-886 24571-934 24571-982
84 435.5
24571-887 24571-935 24571-983
01805056 84 495.5
24571-888 24571-936 24571-984
19" mounting brackets 84 255.5 24571-582
24571-630 24571-678
84 315.5 24571-585
24571-633 24571-681
84 375.5
24571-586 24571-634
24571-682
84 435.5
24571-587 24571-635 24571-683
01805057 84 495.5
24571-588
24571-636
24571-684
With 19" mounting brackets
and front handles 84 255.5 24572-670
24572-690
84 315.5 24572-673 24572-693
84 375.5 24572-674 24572-694
84 435.5 24572-675 24572-695
01805057
84 495.5 24572-676
24572-696
3
1
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.16 Main Catalogue
E 11/2013
Desk-top cases – Yair
Text
Text
RatiopacPRO air dimension drawings
01805058
RatiopacPRO air with A - bezel; B - front handle; C - 19" mounting bracket; D - 19" mounting bracket with front handle
Dimensions table RatiopacPRO air
Height Width Depth
HH WW1 W2 w DdD1d2
in U in mm in mm in
HP in mm in mm in mm in mm Total depth
in mm Usable depth
in mm Plug-in depth
in mm Board depth
in mm
4177.00 112.35
28 164.42 177.62 198.12 142.82 255.5 235.5 175 160
42 235.54 248.74 269.24 213.94 235 220
63 342.42 355.42 375.92 320.62
315.5 295.5
175 160
84 448.90 462.10 482.60 427.30 235 220
5221.45 156.80
42 235.54 248.74 269.24 213.94 295 280
63 342.42 355.42 375.92 320.62
375.5 355.5
175 160
84 448.90 462.10 482.60 427.30 235 220
7310.35 245.70
42 235.54 248.74 269.24 213.94 295 280
63 342.42 355.42 375.92 320.62 355 340
84 448.90 462.10 482.60 427.30
435.5 415.5
175 160
235 220
295 280
355 340
495.5 475.5
175 160
235 220
295 280
355 340
Components mountable in 15 mm depth grid
5.17
Desk-top cases – Yair
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
12309050
12309051
Depth D: 129.8 / 189.9 mm for 160 mm / 220 mm euroboards
Main Catalogue
쮿Only 1/2 U height
쮿Ball-bearing radial fans
쮿Fan holder in 4 widths and 2 depths
쮿Air capacity 36 m³/h (free blowing) per fan
쮿Air exhaust via perforation in cover plate
쮿No mechanical modification to case necessary
쮿Simple mounting
쮿No restriction to rear mounting space
Delivery comprises (Kit)
Order Information
Note
쮿Further configurations available on request
쮿Fans with tacho signal available on request
Radial fan unit for ratiopacPRO air
D
8
26,5
70
W
Item Qty Description
1 1 Fan support, Al, 1.5 mm, with crimp sockets for
mounting the fans
2 1-3 Radial fan, ball bearing, 12 VDC;
airflow volume (50 Hz) 36 m³/h, free blowing;
power consumption 6.7 W;
connecting cable 300 mm, without plug (AWG 26);
noise level in dB (A): 47.0;
max. static pressure in Pa: 190;
max. ambient temperature: 60 °C;
fan housing and rotor: UL 94 V-0
3 1 Compartment seal, PE foam, UL 94, self-adhesive,
temperature range -20 °C ... +85 °C
4 1 Terminal clamp, UL 90 V-0
5 1 Assembly kit
Width Width Number of
fans Part no.
for PCB depth
HP mm 160 mm 220 mm
28 146.87 1
24572-404 24572-408
42 218.00 1
24572-405 24572-409
63 324.67 2
24572-406 24572-410
84 431.35 3 24572-407 24572-411
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
3
4
1
2
5_1_ratiopacPRO_e.fm Seite 17 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.18 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
rppr6639
/ -airY
쮿For vertical EMC shielding between sub-assemblies and side
panel
쮿Scope of delivery sufficient for one case
Delivery comprises (kit)
Order Information
RPPR6640
/ -airY
쮿For horizontal EMC shielding between side panels and cover
plates
쮿Scope of delivery sufficient for one case
Delivery comprises (kit)
Order Information
EMC sealing front/rear panel to side panel
1
2
Item Qty Description
1 4 EMC support profile, Al extrusion
2 2 EMC sealing (textile), core: foam,
sleeve: textile cladding with CuNi coating
3 1 Assembly kit
For case height Part no.
U
2, 3-air 24571-334
3, 4-air 24571-331
4, 5-air 24571-332
6, 7-air 24571-333
5, 6-air 24571-335
EMC sealing side panel to cover plate
Item Qty Description
1 4 Contact strip, stainless steel
Depth Part no.
mm
255 24571-338
315 24571-339
375 24571-340
435 24571-341
495 24571-342
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_1_ratiopacPRO_e.fm Seite 18 Montag, 17. September 2012 7:04 19
5.19
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
rppr6739
Main Catalogue
쮿The contact strip is clipped onto the horizontal rail and sets up
the contact to front panel or rear panel
쮿Can be used for rear horizontal rails (H-VT, L-VT) and all front
horizontal rails
Delivery comprises
Order Information
/ -airY
쮿For shielding of two horizontal rails located directly above each
other with vertical division of the mounting height
Delivery comprises
Order Information
EMC sealing front/rear panel to horizontal
rail
Item Qty Description
110/100 Stainless steel EMC gasket
Width Width Qty/PU Part no.
HP mm
28 131.78 10 24560-229
42 202.9 10 24560-231
63 304.8 10 24560-233
84 416.3 10 24560-235
84 416.3 100 24560-236
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
EMC sealing horizontal rail to horizontal rail
BPA46548 BZA45877
aza45937
Assembly tool
Item Qty Description
1 1 Cover strip, Al, 1 mm
2 2 Contact spring, St, stainless
Length Part no.
HP
20 24562-520
28 24562-528
40 24562-540
42 24562-542
63 24562-563
84 24562-584
Assembly tool for EMC sealing,
St, stainless (horizontal rails),1 piece 24560-271
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_1_ratiopacPRO_e.fm Seite 19 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.20 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
/ -airYMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿No screws required for fixing
쮿Special horizontal rails cover the edges of the front panel
(top and bottom) and prevent bowing of the front panel
Delivery comprises (Kit)
Order Information
Note
쮿To obtain a shielded case, all EMC sealings must be fitted (front
panel/rear panel - side panel; side panel - cover plate; front
panel/rear panel - horizontal rail; horizontal rail - horizontal rail)
쮿EMC sealing see from page 5.18
EMC front/rear panel, slotted, shielded
01811055
01811056
Front panel/horizontal rail
H
W
Item Qty Description
1 1 Full-width front panel, Al, 2.5 mm,
front: anodised, rear: colour passivated
2 2 Horizontal rail, front; special for this front panel
3 4 EMC support profile
4 2 Contact strip horizontal rail - front panel
5 3 EMC textile gasket
6 1 Fixing material kit, user manual
For case
height Height H For case
width Width W Part no.
UmmHPmm
2, 3-air 84.0 28 141.9
24572-599
2, 3-air 84.0 42 213.2
24572-600
2, 3-air 84.0 63 319.7
24572-601
2, 3-air 84.0 84 426.4
24572-602
3, 4-air 128.4 28 141.9 24572-603
3, 4-air 128.4 42 213.2 24572-604
3, 4-air 128.4 63 319.7 24572-605
3, 4-air 128.4 84 426.4 24572-606
4, 5-air 172.9 28 141.9
24572-607
4, 5-air 172.9 42 213.2
24572-608
4, 5-air 172.9 63 319.7
24572-609
4, 5-air 172.9 84 426.4
24572-610
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_1_ratiopacPRO_e.fm Seite 20 Montag, 17. September 2012 7:04 19
5.21
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
06801502
/ -airY
쮿Front panels can also be used as rear panels
쮿No screws required for fixing
쮿Inserted between side panel and castings such as trim,
19" mounting bracket or handle
Delivery comprises
Order Information
Note
쮿Screw-fixed front panels see chapter Front panels, page 7.4
Full-width front panel, slotted, unshielded
Item Qty Description
1 1 Front panel, Al, 2.5 mm,
front: anodised, rear: colour passivated
For case
height Height H For case
width Width W Part no.
UmmHPmm
2, 3-air 84 28 141.9
34571-617
2, 3-air 84 42 213.2
34571-618
2, 3-air 84 63 319.7
34571-619
2, 3-air 84 84 426.4 34571-620
3, 4-air 128.4 28 141.9 34571-605
3, 4-air 128.4 42 213.2 34571-606
3, 4-air 128.4 63 319.7 34571-607
3, 4-air 128.4 84 426.4 34571-608
4, 5-air 172.9 28 141.9
34571-609
4, 5-air 172.9 42 213.2
34571-610
4, 5-air 172.9 63 319.7
34571-611
4, 5-air 172.9 84 426.4 34571-612
5, 6-air 217.3 28 141.9
34571-621
5, 6-air 217.3 42 213.2
34571-622
5, 6-air 217.3 63 319.7
34571-623
5, 6-air 217.3 84 426.4
34571-624
6, 7-air 261.8 28 141.9
34571-613
6, 7-air 261.8 42 213.2
34571-614
6, 7-air 261.8 63 319.7
34571-615
6, 7-air 261.8 84 426.4 34571-616
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_1_ratiopacPRO_e.fm Seite 21 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.22 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
01802055
Shieldable
01804050
Unshielded
/ -airY
쮿Two versions:
unshielded, Al, 2.5 mm;
shieldable, Al extrusion (textile EMC seal, retrofittable)
쮿Mounting on horizontal rails (top and bottom)
Delivery comprises
Order Information
쮿Please order textile EMC seals separately
쮿Assembly parts see page Chapter 7, Front panels
쮿Rear/front panels without perforation see Chapter 7,
Front panels
쮿Rear panels with fan available on request
04602054
Front panels
Delivery comprises
Order Information
Rear panels with ventilation slots
7,45 7,45
B
ø 5,9 x 3,3
W
Z
W - 2,58
3,2 7,2
25
2,5 3 3
H
3,7
3,7
2,5
Item Qty Description
1 1 Rear panel, Al, 2.5 mm, front: anodised, rear: iridescent
green chromated; unshielded or shieldable with
EMC seal (textile)
Height H Width W B unshielded shieldable
UmmHPmmmmPart no.Part no.
2, 3-air 84 28 141.9 30849-007
20848-679
2, 3-air 84 42 213 101.6 30849-014
20848-680
2, 3-air 84 63 319.7 157.5 30849-015
20848-681
2, 3-air 84 84 426.4 208.3 30849-016
20848-682
3, 4-air 128.4 28 141.9 30849-008 20848-633
3, 4-air 128.4 42 213 101.6 30849-021
20848-634
3, 4-air 128.4 63 319.7 157.5 30849-022
20848-635
3, 4-air 128.4 84 426.4 208.3 30849-023 20848-636
4, 5-air 172.9 28 141.9 30849-009
20848-656
4, 5-air 172.9 42 213 101.6 30849-028
20848-657
4, 5-air 172.9 63 319.7 157.5 30849-029
20848-658
4, 5-air 172.9 84 426.4 208.3 30849-030
20848-659
5, 6-air 217.3 28 141.9 30849-011
20848-744
5, 6-air 217.3 42 213 101.6 30849-171
20848-745
5, 6-air 217.3 63 319.7 157.5 30849-172
20848-746
5, 6-air 217.3 84 426.4 208.3 30849-173
20848-747
6, 7-air 261.8 28 141.9 30849-010
20848-640
6, 7-air 261.8 42 213 101.6 30849-035 20848-641
6, 7-air 261.8 63 319.7 157.5 30849-036
20848-642
6, 7-air 261.8 84 426.4 208.3 30849-037 20848-643
Textile EMC seals
Item Qty Description
110/100 Textile EMC seal, core: foam,
sleeve: textile cladding with CuNi coating
Height Height Qty/PU Part no.
U mm pieces
2, 3-air 52 10 21101-857
3, 4-air 97 100 21101-854
3, 4-air 97 10 21101-853
4, 5-air 142 10 21101-858
5, 6-air 187 10 21101-978
6, 7-air 232 100 21101-856
6, 7-air 232 10 21101-855
5_1_ratiopacPRO_e.fm Seite 22 Montag, 17. September 2012 7:04 19
5.23
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
01802075
Tip-up foot
01802076
Stacking aid/design element
/ -airY
쮿Can be used instead of standard feet
쮿Carrying capacity: 25 kg per foot
쮿Mounting holes in bottom of casing
Delivery comprises ((kit))
Order Information
Note
쮿Tip-up feet are required to mount the stacking aid
rppr6658
/ -airY
쮿Retrofit mounting without reworking and tools
쮿Filter replacement without opening the case, IP protection
retained
Delivery comprises (kit)
Order Information
쮿To optimise the air supply, tip-up feet must be fitted to the case,
see page 5.23
Tip-up feet and stacking aid/design element
Item Qty Description
1 4 Foot, PA, UL 94 V-0
2 4 Anti-slip protection, TPE
3 2 Tip-up device, PA, UL 94 V-0
4 1 Assembly kit
Description Part no.
Tip-up foot, silver, similar to RAL 9006 20603-001
Tip-up foot, anthracite, similar to RAL 7016 20603-002
Stacking aid/design element silver, similar to RAL 9006,
PA, UL 94 V-0, PU 4 pieces 20603-004
Stacking aid/design element anthracite, similar to
RAL 7016, PA, UL 94 V-0, PU 4 pieces 20603-003
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Air filters for ratiopacPRO air
Item Qty Description
1 1 Filter holder, Al, 1 mm, powder-coated, RAL 9006
2 1 Filter mat, synthetic fibre
31 Self-adhesive fixings
For case width Air filter Replacement
filter 1 piece
HP Part no. Part no.
28 24571-325 64571-033
42 24571-326 64571-034
63 24571-327 64571-035
84 24571-328 64571-036
5_1_ratiopacPRO_e.fm Seite 23 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.24 Main Catalogue
E 11/2013
Desk-top cases – Y/ -air
aza43284
/ -airY
쮿Forms the GND/earthing connections between side panels,
base plate, top cover and rear panel
쮿Protective GND/earthing connections in accordance with:
DIN EN 50178/VDE 0160
DIN EN 60950/VDE 0805
DIN EN 61010-1/VDE 0411 part 1
DIN EN 61010-1A2/VDE 0411 part 1/A1
쮿VDE tested
Order Information
Earthing kit
Description Part no.
GND/earthing kit, Cu wire 1.5 mm2, PVC sleeve,
green/yellow 24571-380
5.25
Desk-top cases – Y
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 11/2013
Y
쮿For conversion of cases with cover strip, 19" mounting bracket
or 19" mounting bracket with front handle
Delivery comprises
Order Information
Y
쮿For conversion of cases with cover strip, front handle or 19"
mounting bracket with front handle
Delivery comprises
Order Information
YMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿For conversion of cases with cover strip, front handle or 19"
mounting bracket
Delivery comprises
Order Information
Front handles for retrofitting
RPPR6651
Item Qty Description
1 2 Front handle, Al die-cast, powder-coated, RAL 7016
Front handle for Part no.
RatiopacPRO 3 U 24571-301
RatiopacPRO 4 U 24571-302
RatiopacPRO 5 U 24571-993
RatiopacPRO 6 U 24571-303
RatiopacPRO air 3/4 U 24571-304
RatiopacPRO air 4/5 U 24571-305
RatiopacPRO air 6/7 U 24571-306
19" mounting brackets for retrofitting
RPPR6652
Qty Description
219" mounting bracket, Al diecast, powder-coated, RAL 7016
19" mounting angle Part no.
RatiopacPRO 2 U 24571-994
RatiopacPRO 3 U 24571-295
RatiopacPRO 4 U 24571-296
RatiopacPRO 5 U 24571-992
RatiopacPRO 6 U 24571-297
RatiopacPRO air 4 U 24571-298
RatiopacPRO air 5 U 24571-299
RatiopacPRO air 7 U 24571-300
19" mounting bracket with front handle for
conversion
01813056
Qty Description
219" mounting bracket with front handle, Al diecast, powder-
coated, RAL 7016
19" mounting angle Part no.
RatiopacPRO 2 U 24572-700
RatiopacPRO 3 U 24572-701
RatiopacPRO 4 U 24572-702
RatiopacPRO 6 U 24572-704
RatiopacPRO air 4 U 24572-705
RatiopacPRO air 7 U 24572-707
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.26 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
Delivery comprises
Order Information
/ -airY
쮿The air baffle (item 1) closes the space (1/2 U) between the rear
horizontal rail and base plate
Delivery comprises (in kit form)
Order Information
Note
쮿Fan rear panel available on request
쮿Radial fan unit see page 5.17
06801515
/ -airY
쮿Retrofittable without mechanical modifications to the case
쮿Static load-carrying capacity 20 kg per pair
Delivery comprises (kit)
Order Information
Cable holder
02908053 02908052
919
17
14
26,5
46
20,2
Ø
4,4
Ø
3
Ø
4,4
Ø
3
Item Qty Description
1 2 Cable bracket, ABS, UL V-94 0, RAL 7016,
detent for cables between 8 mm and 12 mm
2 1 Drilling template, two drilled holes each per bracket are
needed in rear panel
31 Assembly kit
Description Part no.
Cable holder 24575-800
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Air baffles for ratiopacPRO air
01805059
Item Qty Description
1 1 Compartment seal, PE foam, UL 94 HF 1 + HF 2,
self-adhesive, temperature range: -40 °C ... +85 °C
For case width Length Part no.
HP mm
42 218.4 20833-351
63 325.1 20833-352
84 431.8 20833-353
Strap handles
Item Qty Description
1 1 Handle, steel spring, plastic-sheathed (flexible plastic),
RAL 7016
2 1 Side plate, Al, visible surfaces powder-coated, RAL 9006
3 2 Adaptor, Al die-cast
4 1 Assembly kit
For case depth For case height
3 U, 4 U air For case height4
HE, 5 Uair
mm Part no. Part no.
315 24571-308 24571-314
375 24571-309 24571-315
435 24571-310 24571-316
5_1_ratiopacPRO_e.fm Seite 26 Montag, 17. September 2012 7:04 19
5.27
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 03/2013
/ -airY
쮿Retrofittable without mechanical modifications to the case
쮿Adjustable in 30° increments
쮿Static load-carrying capacity 30 kg
Delivery comprises (kit)
Order Information
Note
쮿Cannot be used in conjunction with front handles
쮿Assembly kit is required for tip-up carrying handle, please order
separately
Tip-up carrying handles
06803006
RPA43897
For case height For case width A B C D
UHPmmmmmmmm
3, 4, 4-air, 5-air 42 283,4 279,4 247,4 115
3, 4, 4-air, 5-air 63 390,1 386,1 354,1 195
3, 4, 4-air, 5-air 84 496,8 492,8 460,8 195
rpa43898
Item Qty Description
1 1 Carrying bar, Al extrusion, powder coated, RAL 9006
2 1 Handle shell, ABS, UL 94 V-0, RAL 7016
3 2 Tip-up protection, ABS, UL 94 V-0, RAL 7016
4 2 Notch device, Al die-cast
5 2 Cover cap, ABS, UL 94 V-0, RAL 7016
For case
height For case
width For case
depth Tip-up
carrying
handle
Assembly
kit
U HP mm Part no. Part no.
3, 4-air 42 255 24571-320 24571-352
3, 4-air 42 315 24571-320 24571-353
3, 4-air 42 375 24571-320 24571-354
3, 4-air 42 435 24571-320 24571-355
3, 4-air 42 495 24571-320 24571-356
3, 4-air 63 255 24571-321 24571-352
3, 4-air 63 315 24571-321 24571-353
3, 4-air 63 375 24571-321 24571-354
3, 4-air 63 435 24571-321 24571-355
3, 4-air 63 495 24571-321 24571-356
3, 4-air 84 255 24571-322 24571-352
3, 4-air 84 315 24571-322 24571-353
3, 4-air 84 375 24571-322 24571-354
3, 4-air 84 435 24571-322 24571-355
3, 4-air 84 495 24571-322 24571-356
4, 5-air 42 255 24571-320 24571-359
4, 5-air 42 315 24571-320 24571-360
4, 5-air 42 375 24571-320 24571-361
4, 5-air 42 435 24571-320 24571-362
4, 5-air 42 495 24571-320 24571-363
4, 5-air 63 255 24571-321 24571-359
4, 5-air 63 315 24571-321 24571-360
4, 5-air 63 375 24571-321 24571-361
4, 5-air 63 435 24571-321 24571-362
4, 5-air 63 495 24571-321 24571-363
4, 5-air 84 255 24571-322 24571-359
4, 5-air 84 315 24571-322 24571-360
4, 5-air 84 375 24571-322 24571-361
4, 5-air 84 435 24571-322 24571-362
4, 5-air 84 495 24571-322 24571-363
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.28 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
/ -airY
Order Information
Main CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
Order Information
Order Information
Torx panhead screws
Description Application Material Dimension Qty/PU Part no.
Countersunk
screw with Torx For horizontal rail to side panel, with GND/earthing
function St,
zinc-plated M4 х 14 100 24571-371
AZA45923
Countersunk
screw with Torx For horizontal rail to side panel, if guide rail is
bolted onto slot 1 St,
zinc-plated M4 х 10 100 24571-372
Nut
Description Application Material Dimension Qty/PU Part no.
AZA45921
Square nut For fixing: parts to side panels, support profiles,
mounting plates St,
zinc-plated M4 100 24560-140
Assembly tools
Description Application Dimension Qty/PU Part no.
Torx screwdriver
T8 164560-026
AZA45925
T20 1 64560-027
aza45938
Assembly tool for
horizontal rails Exclusively to fix stainless steel
EMC gaskets in horizontal rails – 1 24560-271
aza45937
Assembly tool for front
panels
For mounting stainless steel
EMC contact strips on front
panels with lateral slot –124560-270
5_1_ratiopacPRO_e.fm Seite 28 Montag, 17. September 2012 7:04 19
5.29
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Tex t
Mounting position ratiopacPRO
horizontal rails/central rails
front rear front rear
2 U 3 U
01805060 01802057
4 U (3 U + 1 U)
01802058
5 U (1 U + 3 U + 1 U) 5 U (3 U + 2 U)
01805061 01805062
6 U 6 U (2 x 3 U)
01802059 01802060
Horizontal rails can be bolted on in 15 mm depth grid 01808050
H-LDH-LD
H-LDH-LD
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
100
H-LDH-LD
H-LD
H-LD
100
H-KD / H-LD / L-KD
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
H-LDH-LD
H-LDH-LD
H-LDH-LD
H-LD
H-LD
100
H-KD / H-LD / L-KD
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
H-LDH-LD
H-LD
H-LD
233,35
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
ST / VT / MZ
H-LDH-LD
H-LDH-LD
L-ST / L-VT / L-MZ
H-ST / H-VT / H-MZ
100
100
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
H-KD / H-LD / L-KD
H-LDH-LD
H-LDH-LD
H-STH-LD L-ST ST VT MZ
H-VTH-KD L-VT
H-MZL-KD L-MZ
5_1_ratiopacPRO_e.fm Seite 29 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.30 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
Text
Mounting position ratiopacPRO air
horizontal rails/central rails
front rear front rear
4-air U (1/2 U + 3 U + 1/2 U)
01802061
5-air U (1/2 U + 3 U + 1U +1/2 U)
01802062
7-air U (1/2 U + 6 U + 1/2 U) 7-air U (1/2 U + 3 U + 3U 1/2 U)
01802063 01802064
Horizontal rails can be bolted on in 15 mm depth grid 01808050
100
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
H-LDH-LD
H-LD
H-LD
H-KD / H-LD / L-KD
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
100
H-LDH-LD
H-LD
H-LD
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
L-ST / L-VT / L-MZ
H-ST / H-VT / H-MZ
ST / VT / MZ
233,35
H-LDH-LD
H-LD
H-LD
100 100
H-ST / H-VT / H-MZ
L-ST / L-VT / L-MZ
H-KD / H-LD / L-KD
H-LDH-LD
H-LD
H-LD
H-STH-LD L-ST ST VT MZ
H-VTH-KD L-VT
H-MZL-KD L-MZ
5_1_ratiopacPRO_e.fm Seite 30 Montag, 17. September 2012 7:04 19
5.31
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Order Information
Front horizontal rails
With long lip for insertion/extraction of CompactPCI
and VME64x boards
"heavy" "heavy"
Type H-KD Type H-LD
short lip long lip
bza44980 06197008 06197009
Al extrusion, anodised finish, contact surface conducting, with
printed HP markings Al extrusion, anodised finish, contact surface conducting, with
printed HP markings
Usable length Length 1 piece (SPQ 10)1) 1 piece (SPQ 10)1)
HP mm
28 147.32 34560-228 34560-328
42 218.44 34560-242 34560-342
63 325.12 34560-263 34560-363
84 431.80 34560-284 34560-384
M4 × 10, St, zinc-plated,
necessary if guide rail is
screwed to slot 1, PU 100 pieces 24571-372 24571-372
Threaded inserts see page 5.35 5.35
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
"light": loading capacity up to approx. 7.5 kg; "heavy": loading capacity > 7.5 kg
5_1_ratiopacPRO_e.fm Seite 31 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.32 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
Main Catalogue
Order Information
Rear horizontal rails
For indirect backplane fixing
with insulation strip For direct backplane fixing For direct fixing of connectors to
EN 60603-2 (DIN 41612)
04400001 04400002 04400003
"heavy" "heavy" "heavy"
Type H-ST Type H-VT Type H-MZ
standard long lip with Z-rail
06105074 06197011 06197013 06197015
Al extrusion, anodised finish, contact
surface conducting, with printed HP
markings
Al extrusion, anodised finish, contact
surface conducting, with printed HP
markings
Al extrusion, anodised finish, contact
surface conducting, with printed HP
markings
Usable length Length 1 piece (SPQ 10)1) 1 piece (SPQ 10)1) 1 piece (SPQ 10)1)
HP mm
28 147.32 34560-528 34560-728 34560-928
42 218.44 34560-542 34560-742 34560-942
63 325.12 34560-563 34560-763 34560-963
84 431.80 34560-584 34560-784 34560-984
Torx panhead screw, 4 x 10 24571-372 24571-372 24571-372
Perforated rail for connector
mounting with insulation strip
see page 5.35
Z-rail for connector mounting
without insulation strip see page 5.35 – –
Insulation strips see page 5.35
Threaded inserts see page 5.35 5.35 5.35
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
"light": loading capacity up to approx. 7.5 kg; "heavy": loading capacity > 7.5 kg
5_1_ratiopacPRO_e.fm Seite 32 Montag, 1. Oktober 2012 5:30 05
5.33
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Main Catalogue
Order Information
Horizontal rails rear, centre
For indirect mounting of
backplanes via insulation strip For direct backplane mounting For direct fixing of connectors to
EN 60603-2 (DIN 41612)
04400001 04400002 04400003
Type ST Type VT Type MZ
06108090 06197016 06197017 06197018
Al extrusion, finish anodised,
conductive contact surface;
horizontal rail type AB (AB = support)
is required to fix the 80 mm rear I/O boards;
without marking
Al extrusion, finish anodised,
conductive contact surface;
horizontal rail type AB (AB = support)
is required to fix the 80 mm rear I/O boards;
without marking
Al extrusion, finish anodised,
conductive contact surface;
horizontal rail type AB (AB = support)
is required to fix the 80 mm rear I/O boards;
without marking
Usable length Length 1 piece (SPQ 10)1) 1 piece (SPQ 10)1) 1 piece (SPQ 10)1)
HP mm
28 147.32 34561-028 34561-128 34561-228
42 218.44 34561-042 34561-142 34561-242
63 325.12 34561-063 34561-163 34561-263
84 431.80 34561-084 34561-184 34561-284
Torx panhead screw, 4 x 10 24571-372 24571-372 24571-372
Insulation strips see page 5.35
Threaded inserts see page 5.35 5.35 5.35
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
5_1_ratiopacPRO_e.fm Seite 33 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.34 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
Main Catalogue
Order Information
Note
쮿All horizontal rails without print
쮿1000 mm version without M4 thread in end
Horizontal rails (type AB) for rear I/O guide rails
For CompactPCI in rear I/O area
06108009
Type AB
06108069 06197009
Al extrusion, finish anodised,
conductive contact surface;
horizontal rail type AB (AB = support)
is required to fix the 80 mm rear I/O boards;
without marking
Usable length Length 1 piece (SPQ 10)1)
HP mm
20 106.68 34561-520
28 147.32 34561-528
40 208.28 34561-540
42 218.44 34561-542
63 325.12 34561-563
84 431.80 34561-584
1000 34561-501
Screw, M4 x 14, PU 100 pieces, for fastening horizontal rail
to side panel 24560-130
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
"light": loading capacity up to approx. 7.5 kg; "heavy": loading capacity > 7.5 kg
H-KD
H-KD
H-ST AB
ABH-ST
12,75 12,7515
39,75
5_1_ratiopacPRO_e.fm Seite 34 Montag, 17. September 2012 7:04 19
5.35
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Threaded inserts, perforated strips, insulation strips
Threaded insert Perforated strip Insulation strip
M2.5 M3 (item 1)
06103056 BZA45853 BZ6749
Required for fixing the front panel to the horizontal rail; St,
zinc-plated; use collar screw 12.3 mm, see page
6.64
For centring shielded plug-in units,
Al, 1 mm, please order fixing grub screw
separately
For insulated mounting of backplane;
PBT UL 94 V-0, grey
Usable length Length Length Length
HP mm 1 piece
(SPQ 10)1) 1 piece
(SPQ 10)1) mm 1 piece (SPQ 10)1) mm PU 10 pieces2)
28 146.82 34561-328 147.12 30845-197 144.20 24560-828
42 217.94 34561-342 – 218.24 30845-211 210.40 24560-842
63 324.62 34561-363 324.92 30845-232 316.88 24560-863
84 431.30 34561-384 34561-484 431.60 30845-253 428.64 24560-884
5
2
5,08
Accessories
Grub screw M2.5 x 8, PU
100 pieces 21100-276 – – –
Grub screw M2.5 x 9, PU
100 pieces –– 21101-359
Grub screw M3 x 8, PU
100 pieces 21100-646 – –
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least
the SPQ quantity or a multiple thereof
2) Part no. includes one packing unit (PU); delivery is exclusively made in PU
Z-rails, perforated rails
Z-rail for connectors Perforated rail
DIN EN 60603-2, DIN 41612
item 1 31-pin, DIN 41617 EN 606032, DIN 41612
item 1
BZA45849 BZA45850 BZA45848
06708063 06708051
For connector mounting with ST
horizontal rails, please order
threaded insert and screw
separately
For connector mounting with ST
horizontal rails, please order
threaded insert and screw
separately
For connector mounting with VT
horizontal rails, please order
threaded insert and screw
separately
Usable length Length
HP mm 1 piece 1 piece PU 4 pieces
28 142.24 30822-033 20822-049
42 213.36 30822-047 20822-050
60 304.80 30822-065 30819-783 20822-047
84 426.70 30822-089 30819-808 20822-048
Torx panhead screw, to fix connector to
perforated rail,, M2.5 × 7, PU 100 piecesItem 3 24560-147 24560-147 24560-147
Torx panhead screw, to fix perforated rail to
horizontal rail, M2.5 × 10, PU 100 pieces Item 2 24560-148 24560-148 24560-148
172,5
172,5
175,5
2
1
3
3,0
9,75
12,75
2
1
3
12,75
5_1_ratiopacPRO_e.fm Seite 35 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.36 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
Order Information
Divider plates
Divider plates
Mounting position for
stainless steel EMC gasket Mounting position for
textile EMC gasket
front rear front rear
bpa45911 06105078
bpa45912
Stainless steel, 1 mm, is mounted by clipping onto horizontal rail, space
requirement on component side 2 mm; mounting direction varies with
shielding design (EMC stainless steel or textile gasket); retrofitting the divider
plate in an already-assembled subrack/case will first require dismantling of
the horizontal rails; where front panels are unshielded, both mounting
directions are possible
HeightDepthABH
U mmmmmmmm 1 piece
3160 158.3 135.0 113.5 34562-761
3 220 218.3 195.0 113.5 34562-762
6160 158.3 135.0 246.9 34562-763
6 220 218.3 195.0 246.9 34562-764
5_1_ratiopacPRO_e.fm Seite 36 Montag, 17. September 2012 7:04 19
5.37
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Order Information
Note
쮿Please order fixing material for assembly of mounting plate
separately
쮿A guide rail can be mounted on the first and last slot position
쮿4.4" and "reinforced" guide rails cannot be used
Mounting plates
Mounting plate Assembly strip for
partial widths
bpa45875 bpa46557
06812002
Al, 1.5 mm; for mounting over partial
width, please order assembly strips
separately
St, 2 mm, zinc-plated; is bolted from
front to rear onto the horizontal rails;
to fix mounting plates
Width Board lengths
HP mm mm 1 piece 1 piece
28 146.88 160 34562-745 30840-021
28 146.88 220 34562-749 30840-033
28 146.88 280 34562-753 30840-045
28 146.88 340 34562-757 30840-057
42 217.99 160 34562-746 30840-021
42 217.99 220 34562-750 30840-033
42 217.99 280 34562-754 30840-045
42 217.99 340 34562-758 30840-057
63 324.67 160 34562-747 30840-021
63 324.67 220 34562-751 30840-033
63 324.67 280 34562-755 30840-045
63 324.67 340 34562-759 30840-057
84 431.35 160 34562-748 30840-021
84 431.35 220 34562-752 30840-033
84 431.35 280 34562-756 30840-045
84 431.35 340 34562-760 30840-057
Assembly kit for mounting plate
PU 1 kit (Torx countersunk screw M4 x 5, St, zinc-
plated, 12 pieces; screw M4 x 6, St, zinc-plated,
10 pieces; M4 square nut, St, zinc-plated,
10 pieces)
24560-184
Assembly kit for assembly strips of mounting
plate
Torx screw
M2.5 × 5, St, zinc-plated, PU 100 pieces
24560-146
5_1_ratiopacPRO_e.fm Seite 37 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.38 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
Order Information
Note
쮿Please order front frame separately
Horizontal board installation
Horizontal board installation
Board cage Front frame for EMC
shielding Front frame, unshielded
06102073 bpa45913 bza43061
bpa45914
Struts die-cast zinc;
horizontal rails front and rear;
threaded insert, St, zinc-plated;
fixing material kit;
for horizontal mounting of
double-height euroboards in
3 or 4 U high subracks/cases;
54 TE space required; please
order front frame for EMC
shielding separately
2 horizontal covers,
AI, 2.5 mm, front anodised,
rear iridescent green chromated;
2 vertical trims, Al extrusion,
clear passivated;
stainless steel EMC gasket;
front frame forms the contact
between subrack and the sub-
assemblies
Al, 2.5 mm, clear anodised;
front frame with cut-out,
clear internal width w = 266.35 mm
Height Usable
height h
HP
Other dimensions and
options
UHorizontal rail,
front Horizontal rail,
rear PU 1 kit PU 1 kit 1 piece
320 24564-117 24564-109
34564-108
320 24564-118 24564-109
34564-109
428 24564-217 24564-209 34564-208
Assembly tool, for mounting the
EMC gasket (stainless steel) 24560-270
* For direct backplane mounting
273.98 = 54 TE
h
H
273,98 = 54 TE
w
5_1_ratiopacPRO_e.fm Seite 38 Montag, 17. September 2012 7:04 19
5.39
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Order Information
쮿Subdivision of the 6 U assembly area into:
2 x 3 U
1 x 6 U
쮿Designed to accept Euroboards (100 mm high) and double
Euroboards (233.35 mm high)
Note
쮿Please order EMC gasketing kit for horizontal rails separately,
see page 5.19
쮿Please order perforated strips for horizontal rails separately, see
page 5.35
쮿Please order rear centre horizontal rail separately, see page
5.33
Combined mountings (6 U and 2 x 3 U one above the other)
Combined mounting Alternative front panels for
combined mounting Splitting extrusion
Horizontal and vertical
subdivision
(incl. front panel for
stainless steel EMC gasket)
Unshielded front
panel, 6 U, 2 HP
item 6
Front panel for
textile EMC gasket,
6U, 2HP
item 6
For combined
mounting
Item 2
bpa46549 bpa46549 bpa46549 bza45857
bza42182
Item 1: 2 front horizontal rails (H-KD),
Al extrusion, anodised;
item 2: 2 rear horizontal rails (AB),
Al extrusion, anodised;
item 3: threaded insert, St, zinc-
plated;
item 4: Zn die-cast support member;
item 6: front panel 2 HP, 6 U,
shielded; with EMC stainless steel
gasket (84:0 without items 4, 6)
Al, 2.5 mm,
front anodised,
rear iridescent green
chromated
Al, 2.5 mm, U-profile
with notch, 6 U, 2 HP 6 U, die-cast zinc;
splitting extrusion is
inserted in the
grid holes of the
horizontal rail;
the splitting extrusion
can be bolted
Width pitch T1:T2
HP PU 1 kit 1 (SPQ 5) 1 piece (SPQ 5)1) 1 piece
20:62 24562-420
30847-472 30849-140 64560-010
40:42 24562-440
42:40 24562-442
63:19 24562-463
84:0 24562-484
Countersunk screw with Torx
M4 × 14, zinc-plated, PU 100 pieces
fixing splitting extrusion/horizontal rail ––
24560-145
Panhead screw
M2.5 × 10, St, zinc-plated, PU 100 pieces
fixing horizontal rail/splitting extrusion 24560-179
Pozidrive/slotted collar screw
M2.5 x 12.3, St, nickel-plated, PU 100 pieces 21101-101 21101-101
Pozidrive/slotted collar screw
M2.5, black, zinc-plated, PU 100 pieces 21101-102 21101-102
Washer, 2.7 x 5 x 1, plastic PA 6, PU 100 pieces 21101-121 21101-121
Textile gasket, core: foam,
sleeve: textile cladding with CuNi coating,
UL 94 V-0, PU 10 pieces 21101-855
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
4
4
6
1,3
1,3
2
2
5_1_ratiopacPRO_e.fm Seite 39 Montag, 17. September 2012 7:04 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.40 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
Main Catalogue
Order Information
Guide rails for plug-in units and modules, one-piece,
groove width 2 mm and 2.5 mm
Assembly
- can be clipped into Al extruded
horizontal rails
- can be clipped into 1.5 mm thick
plates
Storage temperature
from -40 °C ... 130 °C
For plug-in units and frame type plug-in units
Standard With DIN connector fixing as standard
06101001 06101501
Up to 220 mm length, PBT, UL 94 V-0; from 280 mm length,
multi-piece, end piece PBT, UL 94 V-0,
central section Al extrusion
PBT,UL94V-0, red,
connector is clipped directly onto the guide rails;
for euroboards 100 x 160 mm or 100 x 220 mm only
Board
lengths Groove
width Colour
mm mm mm PU 10 pieces2) 1 pair (SPQ 10)1)
70 2red – –
70 2 grey
160 2red 24560-351 64560-074
220 2 red 24560-353 64560-075
280 2red 24560-379
340 2 red 24560-380
160 2.5 red – –
220 2.5 red
Accessories
Retention screw,
PU 100 pieces 24560-141
ESD clip, PU 50 pieces 24560-255
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
2) Part no. includes one packing unit (PU); delivery is exclusively made in PU
Description of accessories see from page 6.41
5_1_ratiopacPRO_e.fm Seite 40 Montag, 17. September 2012 7:04 19
5.41
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Main Catalogue
Order Information
Guide rails type "accessories", one-piece,
groove width 2 mm and 2.5 mm
Assembly
- can be clipped into horizontal rails
in Al extrusion
- can be clipped into 1.5 mm thick
plate
Storage temperature
from -40 °C ... +130 °C
Guide rail type
"Accessories" "Accessories" strengthened For heavy modules,
Al extrusion, silver,
robust version
06102002 bza46554 06102005
Up to 220 mm length, PBT, UL 94 V-0;
> 280 mm length, multi-piece,
end piece PBT, UL 94V-0,
middle section Al extrusion
PBT UL 94V-0, red;
support beam of guide rails
adds to strengthening
Al extrusion; is screwed to horizontal rail
"heavy" with retention screws
Board
lengths Groove
width Colour
mm mm mm PU 10 pieces2) 1 piece (SPQ 50)1) 1 piece (SPQ 10)1)
100 2red – – –
160 2 red 24560-373 64560-076
160 2grey 34562-881
220 2 red 24560-374 64560-078
220 2grey 34562-882
280 2 red/silver 24560-375 64560-080 34562-883
340 2red/silver 24560-376 34562-884
400 2 red/silver 34562-885
160 2.5 silver 34564-881
220 2.5 silver 34564-882
280 2.5 silver 34564-883
340 2.5 silver 34564-884
400 2.5 silver 34564-885
Accessories
Retention screw,
PU 100 pieces 24560-141 24560-141 24560-157
ESD clip, PU 50 pieces 24560-255
Board locking, red,
PU 10 pieces 24560-377
Board handle, red,
PU 10 piecesdescription 24560-378
Identification strips for board
handle, red, PU 1 sheet =
438 pieces 60817-228
Coding see page 6.41
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity
(SPQ); please order at least the SPQ quantity or a multiple thereof
2) Part no. includes one packing unit (PU); delivery is exclusively made in PU
Description of accessories see from page 6.41
5_1_ratiopacPRO_e.fm Seite 41 Montag, 1. Oktober 2012 5:51 05
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.42 Main Catalogue
E 10/2012
Desk-top cases – Y/ -air
Main Catalogue
Order Information
Note
쮿Reinforcement for plastic profiles (PVC) > 280 mm depth
available on request
Guide rails for CompactPCI, VME64x with coding,
4.4" PCBs, groove width 2 mm and 2.5 mm
Assembly
- can be clipped into Al extruded
horizontal rails
- can be clipped into1.5 mm thick
plates
Storage temperature
from -40 °C ... 130 °C
For CompactPCI, VME64x with coding For 4.4" PCBs
In accordance with IEEE 1101.10
and IEC 60297-3-103 Offset 0.1" for power supply units in
accordance with IEEE 1101.10 and
IEC 60297-3-103
06106001 06106002 06104009
One-piece for groove width 2 mm, PBT,
UL 94 V-0;
multi-piece at groove width 2,5 mm,
end-piece PBT, UL 94 V-0,
center piece Al profile
PBT, UL 94 V-0,
for installation of power supplies in
CompactPCI systems or
plug-in units with SMD placement
One-piece, PBT, UL 94 V-0;
for 4.4" PCBs or drive units
Board
lengths Groove
width Colour PU 10 pieces2) PU 10 pieces2) PU 10 pieces
mm mm mm
70 2red 24560-355 – –
70 2 grey 24560-360 ––
160 2red 24560-356 24560-361
160 2 grey 24560-358 ––
160 2green 24560-359
220 2 red 24560-362
220 2grey –––
220 2 green – – –
160 2.5 red –––
220 2.5 red 24561-330 ––
220 2.5 grey 24561-340 – –
280 2.5 red 24561-331 ––
280 2.5 grey 24561-341 – –
340 2.5 red 24561-332 ––
340 2.5 grey 24561-342 – –
Accessories
ESD clip, PU 50 pieces 24560-255 ––
ESD clips, for alignment pin,
PU 50 pieces 24560-256 24560-256
Retention screw, PU 100 pieces 24560-141 24560-141 24560-158
Coding peg, PU 100 pieces 20817-501 20817-501
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
2) Part no. includes one packing unit (PU); delivery is exclusively made in PU
Description of accessories see from page 6.41
5_1_ratiopacPRO_e.fm Seite 42 Montag, 17. September 2012 7:04 19
5.43
Desk-top cases – Y/ -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Main Catalogue
Order Information
Note
쮿Air baffle for 280 mm deep and for 80 mm rear I/O boards
available on request
Air baffle for slots
Air baffle Air baffle with front panel
without front panel front panel with lateral
groove for stainless steel
EMC gasket
U front panel
for textile EMC gasket
06108085 06108087 06108088
06101507
Al, 1 mm, incl. assembly kit;
prevents an air short circuit in
unoccupied slot positions;
is pushed into the groove
of the guide rails
Air baffle, Al, 1 mm;
front panel, Al, 2.5 mm,
front anodised, rear conductive;
EMC gasket (stainless steel);
fixing material kit prevents an air
short- circuit where slots are
unoccupied;
is pushed into the groove
of the guide rails
Air deflector, Al, 1 mm,
front panel, Al extrusion, 2.5 mm,
front anodised, rear conductive;
EMC gasket (textile);
fixing material kit prevents an air
short-circuit where slots are
unoccupied;
is pushed into the groove
of the guide rails
Depth Width Height
mm HP U 1 piece 1 piece 1 piece
160 4 3 34562-823 20848-712
20848-728
160 4 6 34562-826
20848-720
20848-736
160 8 3 34562-833
20848-714 20848-730
160 8 6 34562-836
20848-722 20848-738
160 12 334562-843
20848-716 20848-732
160 12 6 34562-846
20848-724 20848-740
220 4 3 34562-824
20848-713 20848-729
220 4 6
34562-827 20848-721
20848-736
220 8 3
34562-834 20848-715 20848-731
220 8 6
34562-837 20848-723 20848-739
220 12 3
34562-844 20848-717 20848-733
220 12 6
34562-847 20848-725 20848-741
Assembly tool
for EMC gasket (stainless steel),
1 piece 24560-270
5_1_ratiopacPRO_e.fm Seite 43 Montag, 1. Oktober 2012 5:57 05
Desk-top cases – i
Overview . . . . . 0
Cabinets . . . . . . 1
Wall mounted
cases . . . . . . . . 2
Accessories for
cabinets and wall
mounted cases 3
Climate control 4
Desk-top cases 5
Subracks/
19" chassis . . . 6
Front panels,
plug-in units . . 7
Systems . . . . . . 8
Power supply
units . . . . . . . . . 9
Backplanes . . 10
Connectors, front
panel component
system . . . . . . 11
Appendix . . . . 12 Downloads and further important information can be found
on the Internet under www.schroff.biz
5.44 Main Catalogue
E 10/2012
iMain Catalogue
05809001
05806052 05806050 05806055 05806056
Easy access provided by
removable cladding parts Extremely robust
one-piece die-cast frame Non-sensitive,
scratch-resistant finish
through powder coating
Low weight
05806054 05806053 05806051 noa44075
Wide accessory
programme with acrylic
glass front hoods,
carrying handles, ...
Assembly possibility
for euroboards and
backplanes
EMC version VDE-compliant
GND/earthing
Standards
쮿Internal dimensions in accordance with
IEC 60297-3-101
쮿Ingress protection IP 20 in accordance with
IEC 60529
쮿EMC test in accordance with VG 95373 part 15
쮿Protective GND/earth connections in accordance
with:
DIN EN 50178 / VDE 0160
DIN EN 60950 / VDE 0805
DIN EN 61010-1 / VDE 0411 part 1
DIN EN 61010-1A2 / VDE 0411 part 1/A1
5_2_propacPRO_e.fm Seite 44 Montag, 17. September 2012 7:46 19
Desk-top cases – i
5.45
Main Catalogue
E 10/2012
iMain Catalogue
Aluminium case for 19" components to IEC 60297-3-100
or individual electronics assemblies
쮿 Front frame and side panels in aluminium
쮿 Extensive accessories, matched to portable applications
쮿Basic level shielding from basic versions up,
extended EMC shielding retrofittable
쮿 Design alternative to compacPRO
Desktop cases
쮿Complete case (pre-assembled)
Prepared for 19" components to IEC 60297 for installation
of euroboards
Basic level shielding from basic versions up, extended
EMC shielding retrofittable
Height 3 U, 6 U
쮿Cases
Pre-assembled cases as basis for individual components
or 19" components (IEC 60297)
Basic level shielding from basic versions up, extended
EMC shielding retrofittable
Height: 2 U, 3 U, 4 U, 6 U
3 U and 4 U cases prepared for tip-up carrying handle
05809003 05806003
Accessories
05809002
ServicePLUS from page 5.4
e.g. modifications (special colours, special depths,
cut-outs in top cover, base plate or side panels)
e.g. assembly service from 1 piece
www.schroff.biz/ServicePLUS
30407004
MicroTCA
Overview . . . . 5.44
propacPRO
Complete cases
3, 6 U,
unshielded/
shielded ...... . 5.46
Cases 2, 3 U . . . . 5.50
Cases 4, 6 U . . . . 5.51
Cases for tip-up
carrying handle
3, 4 U......... . 5.52
Dimensions . . . . . 5.53
EMC shielding . . 5.55
Accessories
Front panels . . . . 5.54
Rear panels . . . . . 5.55
Design elements 5.58
Lateral covers . . 5.59
Handles . . . . . . . . 5.60
Air filters . . . . . . . 5.61
Hoods . . . . . . . . . 5.62
Mounting plates . 5.64
GND/earthing kit 5.65
Cable holder . . . 5.65
Mounting
position
horizontal/
central rails . . . . 5.66
Horizontal rails . 5.67
Threaded inserts 5.68
Z-rails,
perforated rails . 5.69
Combined
mounting . . . . . . 5.70
Horizontal board
assembly . . . . . . 5.71
Tip-up feet . . . . . 5.72
Guide rails and
ESD clips . . . . . . 5.73
Divider plates . . . 5.75
Air flow barrier . . 5.75
ServicePLUS . . 5.4
5_2_propacPRO_e.fm Seite 45 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.46 Main Catalogue
E 11/2013
Desk-top enclosure – i
ServicePLUS see page 5.4
iMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal ty pe: ready for despat ch within 10 worki ng days
쮿Desk-top case with pre-configured components, in accordance
with IEC 60297-3-101; prepared for 19" components such as
plug-in units and euroboards
쮿Ventilation slots in base plate
쮿Rear panel with vent slots
Delivery comprises (Items 1-7, 9 and 10 fitted)
Complete case,
EMC shielded
05809004
3 U
05806106
Maximale Einbautiefe = D - 45
(Distanz: Frontplatte - Rückwand)
8
7
5
6
12
11
13
14
10 b
3
4
10 a
15
9
1
9
2
Item Qty Description
3 U 6 U
1 1 1 Frame, Al die-cast, powder-coated, RAL 7016
2 2 4 Side panel, Al extrusion, powder-coated, RAL 9006,
with EMC side panel gasketing
3 1 1 Cover plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006,
with GND/earthing tag
4 1 1 Base plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006, with GND/
earthing tag, base plate with 4 rows of ventilation slots
5 2 2 End piece for rear, ABS, RAL 7016, UL 94 V-0;
can be used as a foot when case is used in vertical
position
6 - 2 Adaptor bracket (only at 6 U)
7 - 2 Cover trim for side panel, Al extrusion,
powder-coated, RAL 9006
8 4 4 Case foot with anti-slip protection, PC, black,
UL 94 V-0 (20603-002)
9 2 2 Lateral trim, Al extrusion, visible surface painted,
RAL 7016 with EMC sealing (textile)
10a 2 2 Horizontal rail, Al extrusion, with threaded insert, St,
M2.5; perforated strip, Al, 1 mm, EMC contact strip
between front panel - horizontal rail - cover plate
10b 2 2 Horizontal rail, Al extrusion, with threaded insert,
St, M2.5; EMC contact strip between rear panel -
horizontal rail - cover plate
11 2 2 Centre horizontal rail top/bottom, Al extrusion,
with threaded insert, St, M2.5 and insulation strip,
PBT, UL 94 V-0
(for indirect backplane mounting); enclosed loose
12 - 1 Centre horizontal rail, Al extrusion, anodised,
conductive surfaces, with two threaded inserts,
St, M2.5 and two insulation strips, PBT, UL 94 V-0
13 1 1 Rear panel with perforation, Al, 2.5 mm, anodised,
with EMC sealing (textile) affixed
14 2 2 EMC support profile rear, Al extrusion,
EMC sealing (textile) affixed
15 10/
20 10/
20 Guide rail for 160 mm board length, PBT, UL 94 V-0,
28/42HP10pieces,
63/84 HP 20 pieces
16 1 1 GND/earthing kit
17 1 1 Assembly kit
5.47
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 11/2013
Main Catalogue
Order Information
Note
쮿Dimension drawings of side panel see from page 5.53
Complete cases, EMC shielded
05809051
05806060
3 U
05806062
6 U
155,5
130,0
112,3
289,0
262,8
245,7
W2
W1
121,95
150,9
D
32,5
15 Ø 4,6
4
7,2
121,95
265,9
15
Ø 4,6
4
7,2
121,95
284,3
D
32,5
Usable width Width W1 Depth D Height Part no.
W2 W2 W1 D
HP mm mm mm U
28 147.3 185.9 266 324576-101
28 147.3 185.9 326 3 24576-102
42 218.4 257 266 324576-103
42 218.4 257 326 3 24576-104
42 218.4 257 386 324576-105
63 325.1 363.7 266 3 24576-106
63 325.1 363.7 326 324576-107
63 325.1 363.7 386 3 24576-108
84 431.8 470.3 266 324576-109
84 431.8 470.3 326 3 24576-110
84 431.8 470.3 386 324576-111
84 431.8 470.3 446 3 24576-112
84 431.8 470.3 506 324576-113
84 431.8 470.3 326 6 24576-121
84 431.8 470.3 446 624576-122
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.48 Main Catalogue
E 11/2013
Desk-top enclosure – i
ServicePLUS see page 5.4
Main Catalogue
쮿Desk-top case with pre-configured components, in accordance
with IEC 60297-3-101; prepared for 19" components such as
plug-in units and euroboards
쮿Ventilation slots in base plate
쮿Rear panel perforated
Delivery comprises (Items 1-7, 9 and 10 fitted)
Complete cases,
unshielded
05809004
3 U
05806105
Maximum mounting depth = D - 45
(Distance: front panel - rear panel)
7
5
6
13
12
14
1
9
2
11
3
4
10
15
9
8
Item Qty Description
3 U 6 U
1 1 1 Frame, Al die-cast, powder-coated, RAL 7016
2 2 4 Side panel, Al extrusion, powder-coated, RAL 9006
3 1 1 Cover plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006, with
GND/earthing tag
4 1 1 Base plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006, with GND/
earthing tag, base plate with 4 rows of ventilation slots
5 2 2 End piece for rear, ABS, RAL 7016, UL 94 V-0;
can be used as a foot for use in vertical position
6 - 2 Adaptor bracket (only at 6 U)
7 - 2 Cover trim for side panel, Al extrusion,
powder-coated, RAL 9006
8 4 4 Case foot with anti-slip protection, PC, black,
UL 94 V-0 (20603-002)
9 2 2 Lateral trim, Al extrusion, visible surface painted,
RAL 7016 with EMC sealing (textile)
10 2 2 Horizontal rail, Al extrusion, with threaded insert,
St, M2.5
11 2 2 Rear horizontal rail, Al extrusion, with threaded insert,
St, M2.5 and insulation strips, PBT, UL 94 V-0
(for indirect backplane mounting)
12 - 1 Centre horizontal rail, Al extrusion, anodised,
conductive surfaces, with two threaded inserts,
St, M2.5 and two insulation strips, PBT, UL 94 V-0
13 1 1 Rear panel with perforation, Al, anodised, 2 mm
at 28, 42 and 63 HP, 2.5 mm at 84 HP
14 4 4 Support member for rear panel, Zn die-cast
15 10/
20 10/
20 Guide rail for 160 mm board length, PBT, UL 94 V-0,
28/42 HP 10 pieces, 63/84 HP 20 pieces
16 1 1 GND/earthing kit
17 1 1 Assembly kit
5.49
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 11/2013
Main Catalogue
Order Information
Maximum mounting depth = D - 45
(Distance: front panel - rear panel)
Note
쮿Dimension drawings of side panel see from page 5.53
Complete cases, unshielded
05809051
05806060
3 U
05806062
6 U
155,5
130,0
112,3
289,0
262,8
245,7
W2
W1
121,95
150,9
D
32,5
15 Ø 4,6
4
7,2
121,95
265,9
15
Ø 4,6
4
7,2
121,95
284,3
D
32,5
Usable width Width W1 Depth D Height Part no.
W2 W2
HP mm mm mm U
28 147.3 185.9 266 324576-001
28 147.3 185.9 326 3 24576-002
42 218.4 257 266 324576-003
42 218.4 257 326 3 24576-004
42 218.4 257 386 324576-005
63 325.1 363.7 266 3 24576-006
63 325.1 363.7 326 324576-007
63 325.1 363.7 386 3 24576-008
84 431.8 470.3 266 324576-009
84 431.8 470.3 326 3 24576-010
84 431.8 470.3 386 324576-011
84 431.8 470.3 446 3 24576-012
84 431.8 470.3 506 324576-013
84 431.8 470.3 326 6 24576-021
84 431.8 470.3 446 624576-022
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.50 Main Catalogue
E 10/2012
Desk-top enclosure – i
Main Catalogue
쮿Desk-top case with pre-configured components, in accordance
with IEC 60297-3-101; prepared for 19" components such as
plug-in units and euroboards
쮿Ventilation slots in base plate
쮿Prepared for GND/earthing
Delivery comprises (kit, items 1 - 5 fitted)
Order Information
Maximum mounting depth = D - 45
(Distance: front panel - rear panel)
Note
쮿Case, 3 U with side panel for tip-up carrying handle,
see page 5.52
쮿Dimensions see page 5.48
쮿Dimensions side panel, see page 5.53
Cases, 2 and 3 U, unshielded
05806001
05806057
05806077
Cross-section 2 U, 3 U
05806059 05806060
2 U 3 U
ServicePLUS see page 5.4
Item Qty Description
1 1 Frame, Al die-cast, powder-coated, RAL 7016
2 2 Side panel, Al extrusion, powder-coated, RAL 9006
3 1 Cover plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006,
with GND/earthing tag
4 1 Base plate, Al, 1 mm, internal surface conductive, visible
surface powder-coated, RAL 9006, with GND/earthing
tag, base plate with 4 rows of ventilation slots
5 2 End piece for rear, ABS, RAL 7016, UL 94 V-0;
can be used as a foot for use in vertical position
6 4 Case foot with anti-slip protection, PC, black, UL 94 V-0
7 1 Assembly kit
Usable width Width W1 Depth D 2 U 3 U
W2 W2 Part no. Part no.
HP mm mm mm
28 147.3 185.9 266
14576-101
28 147.3 185.9 326
14576-103
42 218.4 257 266 14576-021 14576-121
42 218.4 257 326 14576-023 14576-123
42 218.4 257 386 14576-125
63 325.1 363.7 266
14576-041 14576-141
63 325.1 363.7 326
14576-043 14576-143
63 325.1 363.7 386 14576-045
14576-145
84 431.8 470.3 266
14576-161
84 431.8 470.3 326 – 14576-163
84 431.8 470.3 386
14576-165
84 431.8 470.3 446
14576-167
84 431.8 470.3 506
14576-169
Accessories
GND/earthing kit Cu wire 1.5 mm2, PVC sleeve, green/
yellow, links side panels, base, cover and rear panel,
PU 1 piece 21102-001
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 50 Montag, 17. September 2012 7:46 19
5.51
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Main Catalogue
쮿Desk-top case with pre-configured components, in accordance
with IEC 60297-3-101; prepared for 19" components such as
plug-in units and euroboards
쮿Ventilation slots in base plate
쮿Prepared for GND/earthing
Delivery comprises (kit, items 1 - 6 fitted)
Order Information
Maximum mounting depth = D - 45
(Distance: front panel - rear panel)
Note
쮿Case, 4 U with side panel for tip-up carrying handle,
see page 5.52
쮿Dimensions side panel, see page 5.53
Cases, 4 and 6 U, unshielded
05806003
05806058
05806078
05806061 05806062
4 U 6 U
ServicePLUS see page 5.4
Item Qty Description
4 U 6 U
1 11Frame, Al die-cast, powder-coated, RAL 7016
2 2 4 Side panel, Al extrusion, powder-coated, RAL 9006
3 11Cover plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006,
with GND/earthing tag
4 1 1 Base plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006, with GND/
earthing tag, base plate with 4 rows of ventilation slots
5 22End piece for rear, ABS, RAL 7016, UL 94 V-0;
can be used as a foot for use in vertical position
6 2 Adaptor bracket, Al
7 22Cover trim for side panel, Al extrusion,
powder-coated, RAL 9006
8 4 4 Case foot with anti-slip protection, PC, black,
UL 94 V-0
9 11Assembly kit
Usable width Width W1 Depth D 4 U 6 U
W2 W2 Part no. Part no.
HP mm mm mm
42 218.4 257 266
14576-221
42 218.4 257 326
14576-223
63 325.1 363.7 266
14576-241
63 325.1 363.7 326
14576-243
63 325.1 363.7 386 14576-245
63 325.1 363.7 446
14576-247
84 431.8 470.3 326
14576-463
84 431.8 470.3 386
14576-265 14576-465
84 431.8 470.3 446
14576-267 14576-467
84 431.8 470.3 506
14576-269 14576-469
Accessories
GND/earthing kit Cu wire 1.5 mm2, PVC sleeve, green/
yellow, links side panels, base, cover and rear panel ,
PU 1 piece 21102-001
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 51 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.52 Main Catalogue
E 10/2012
Desk-top enclosure – i
iMain CataloguePart number in bold face type: ready for despatch within 2 work ing daysPart number in normal type: ready for despat ch within 10 worki ng days
쮿Desk-top case with pre-configured components, in accordance
with IEC 60297-3-101; prepared for 19" components such as
plug-in units and euroboards
쮿Ventilation slots in base plate
쮿Prepared for GND/earthing
쮿Prepared for fitting of tip-up carrying handle
Delivery comprises (kit, items 1 - 6 fitted)
Order Information
Note
쮿Dimensions see page 5.48
쮿Dimensions side panel, see page 5.53
3 U and 4 U cases, unshielded,
with holes for tip-up carrying handle
05812006
05812050
05812051
05812052 05812053
3 U 4 U
ServicePLUS see page 5.4
5
2
1
7
3
4
155,5
130,0
112,3
200,0
174,0
156,8
W2
W1
121,95
150,9
D
32,5
15
Ø 4,6
4
7,2
17,0 17,0 Ø 4,6 Ø 10,4
69,0
11,4
121,95
33,05
195,3
D
32,5 17,0 17,0
69,0
15
Ø 4,6
4
7,2
Ø 4,6 Ø 10,4
Item Qty Description
3 U 4 U
1 1 1 Frame, Al die-cast, powder-coated, RAL 7016
2 2 4 Side panel, Al extrusion, powder-coated, RAL 9006;
with drill holes for tip-up carrying handle
3 1 1 Cover plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006,
with GND/earthing tag
4 1 1 Base plate, Al, 1 mm, internal surface conductive,
visible surface powder-coated, RAL 9006,
with GND/earthing tag, base plate with 4 rows of
ventilation slots
5 2 2 End piece for rear, ABS, RAL 7016, UL 94 V-0;
can be used as a foot for use in vertical position
6 2 Cover trim for side panel, Al extrusion,
powder-coated, RAL 9006
7 4 4 Case foot with anti-slip protection, PC, black,
UL 94 V-0
8 1 1 Assembly kit
Usable width Width W1 Depth D 3 U 4 U
W2 W2 Part no. Part no.
HP mm mm mm
42 218.4 257.0 326
14577-123 14577-223
42 218.4 257.0 386
14577-125
63 325.1 363.7 326
14577-143 14577-243
63 325.1 363.7 386
14577-145 14577-245
84 431.8 470.3 326
14577-163
84 431.8 470.3 386
14577-165 14577-265
Accessories
GND/earthing kit Cu wire 1.5 mm2, PVC sleeve, green/
yellow, links side panels, base, cover and rear panel , PU
1 piece 21102-001
Tip-up carrying handle for 42 HP case width, PU 1 kit 24576-071
Tip-up carrying handle for 63 HP case width, PU 1 kit 24576-072
Tip-up carrying handle for 84 HP case width, PU 1 kit 24576-073
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 52 Montag, 17. September 2012 7:46 19
5.53
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Tex t
Dimensions
Extruded side panel 2 U Extruded side panel 3 U
05806079 05806080
Extruded side panel 4 U, right Extruded side panel 4 U, left
05806081 05806082
Extruded side panel 6 U Dimensions table
For case depth D d n
mm mm mm
266 221.6 210 14
326 281.6 270 18
386 341.6 330 22
446 401.6 390 26
506 461.6 450 30
Note
A side panel for case 6 U consists of 2 pieces 3 U extruded side panels
Side panel with horizontal rail
05806083 05806107
D
12,25
e=D-62,1
5_2_propacPRO_e.fm Seite 53 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.54 Main Catalogue
E 10/2012
Desk-top enclosure – i
05806063
PPA43756
Main Catalogue
Delivery comprises
Order Information
쮿EMC front panel see chapter Front Panels, page 7.7
05806064
05806065
Main Catalogue
Delivery comprises
Order Information
Note
쮿Please order items 2, 3 and 4 separately
Front panel, unshielded,
for mounting on case frame
Item Qty Description
1 1 Full-width front panel, Al, 2 mm (on 84 HP = 2.5 mm),
anodised, cut edges plain
2 1 Assembly kit
For case
height For case
width ABCD Part no.
U HP mmmmmmmm
242 238.7 230.0 74.0 84.0 20850-128
2 63 345.4 336.7 74.0 84.0 20850-129
284 452.0 443.3 74.0 84.0 20850-130
3 28 167.6 158.9 118.5 128.5 20850-134
342 238.7 230.0 118.5 128.5 20850-135
3 63 345.4 336.7 118.5 128.5 20850-136
384 452.0 443.3 118.5 128.5 20850-137
4 42 238.7 230.0 162.9 172.9 20850-142
463 345.4 336.7 162.9 172.9 20850-143
4 84 452.0 443.3 162.9 172.9 20850-144
684 452.0 443.3 251.8 261.8 20850-158
Front panel, 1 U, unshielded, for 4 U case,
for mounting on horizontal rails
Item Qty Description
1 1 Front panel, Al, 2.5 mm, front anodised,
rear iridescent green chromated
Width A B C Front panel
HP mm mm mm Part no.
28 141.9 127.0 20850-423
42 213.0 198.1 101.6 20850-424
63 319.7 304.8 157.5 20850-425
84 426.4 411.5 203.2 20850-426
Width Item 2
EMC gasket,
front panel/
horizontal rail
PU 10 pieces
Item 3
EMC gasketing kit
horizontal rails,
1 piece
Item 4
Horizontal rail
type H-KD,
1 piece (SPQ 10)1)
HP Part no. Part no. Part no.
28 24560-229 24562-528 34560-228
42 24560-231 24562-542 34560-242
63 24560-233 24562-563 34560-263
84 24560-235 24562-584 34560-284
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is
exclusively made in standard pack quantity (SPQ); please order at least the SPQ
quantity or a multiple thereof
5_2_propacPRO_e.fm Seite 54 Montag, 17. September 2012 7:46 19
5.55
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
01802055
01804050
Unshielded
01802055
Shieldable
Main Catalogue
쮿Two versions: unshielded, Al, 2.5 mm
shieldable, Al extrusion (textile EMC gasketing retrofittable)
Delivery comprises
Order Information
쮿Please order textile EMC gasket separately
쮿EMC gasket rear panel - horizontal rail see page 5.65
쮿Horizontal rails see page 5.67
쮿Assembly parts see page 6.63
04602054
Main Catalogue
쮿The textile EMC gasket is glue fixed laterally on the front panel,
always in the groove on the right-hand side of the profile
쮿Temperature range -40 °C ... +70 °C
Delivery comprises ()
Order Information
Rear panel, perforated,
for mounting on horizontal rails
7,45 7,45
B
ø 5,9 x 3,3
W
Z
3,2 7,2
25
3 3
H
2,5
W - 2,58
2,5
3,7
3,7
Item Qty Description
1 1 Rear panel, Al, 2.5 mm,
front: anodised, rear: iridescent green chromated;
unshielded or shieldable with EMC sealing (textile)
Height H Width W B h unshielded shieldable
U mm HP mm mm mm Part no. Part no.
284 28 141.9 78 30849-007
20848-679
2 84 42 213 101.6 78 30849-014
20848-680
284 63 319.7 157.5 78 30849-015
20848-681
2 84 84 426.4 208.3 78 30849-016
20848-682
3128.4 28 141.9 122.4 30849-008 20848-633
3 128.4 42 213 101.6 122.4 30849-021
20848-634
3128.4 63 319.7 157.5 122.4 30849-022
20848-635
3 128.4 84 426.4 208.3 122.4 30849-023 20848-636
4172.9 28 141.9 166.9 30849-009
20848-656
4 172.9 42 213 101.6 166.9 30849-028
20848-657
4172.9 63 319.7 157.5 166.9 30849-029
20848-658
4 172.9 84 426.4 208.3 166.9 30849-030
20848-659
6261.8 28 141.9 255.8 30849-010
20848-640
6 261.8 42 213 101.6 255.8 30849-035 20848-641
6261.8 63 319.7 157.5 255.8 30849-036
20848-642
6 261.8 84 426.4 208.3 255.8 30849-037 20848-643
Textile EMC gasket
Item Qty Description
110/100 Textile EMC gasket, core: foam,
sleeve: textile cladding with CuNi coating
Height Height Qty/PU Part no.
U mm pieces
252 10 21101-857
3 97 100 21101-854
397 10 21101-853
4 142 10 21101-858
6232 100 21101-856
6 232 10 21101-855
5_2_propacPRO_e.fm Seite 55 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.56 Main Catalogue
E 10/2012
Desk-top enclosure – i
05806066
ppa43882
Main Catalogue
쮿Mounting with support brackets on case (right and left)
쮿Versions with and without perforation
Delivery comprises
Order Information
05806067
Main Catalogue
쮿Mounts on case (left, right)
쮿Without perforation
Delivery comprises
Order Information
Rear panel, unshielded,
for mounting on case frame
Item Qty Description
1 1 Full-width rear panel, Al, anodised, cut edges blank
28, 42, 63 HP = 2 mm thickness
84 HP = 2.5 mm thickness
2 4 Support member, Zn die-cast
31 Assembly kit
Height H Width W w With
perforation Without
perforation
U mm HP mm mm Part no. Part no.
284 42 213 190 24576-144 24576-044
2 84 63 320 298 24576-145 24576-045
284 84 426 406 24576-146 24576-046
3 128.5 28 142 118 24576-147 24576-047
3128.5 42 213 190 24576-148 24576-048
3 128.5 63 320 298 24576-149 24576-049
3128.5 84 426 406 24576-150 24576-050
4 172.9 42 213 190 24576-152 24576-052
4172.9 63 320 298 24576-153 24576-053
4 172.9 84 426 406 24576-154 24576-054
6261.8 84 426 406 24576-158 24576-058
Rear panel, shielded,
for mounting on case frame
Item Qty Description
1 1 Full-width EMC rear panel, Al 1.5 mm, passivated,
with GND/earthing connection (Faston 6.3 mm)
2 2 Textile EMC gasketing, for mounting top and bottom,
core: foam,
sleeve: textile cladding with CuNi coating
3 2 Textile EMC gasketing, for mounting left and right,
core: foam,
sleeve: textile cladding with CuNi coating
4 1 Assembly kit
Height H Height h Width W w Part no.
UmmmmHPmmmm
2101.5 84 42 217.9 213 24576-244
2 101.5 84 63 324.6 319.7 24576-245
3146 128.4 28 146.8 141.9 24576-247
3 146 128.4 42 217.9 213 24576-248
3146 128.4 63 324.6 319.7 24576-249
3 146 128.4 84 431.3 426.4 24576-250
4190.4 172.9 42 217.9 213 24576-252
4 190.4 172.9 63 324.6 319.7 24576-253
4190.4 172.9 84 431.3 426.4 24576-254
6 279.3 261.8 84 431.3 426.4 24576-258
5_2_propacPRO_e.fm Seite 56 Montag, 17. September 2012 7:46 19
5.57
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
05806102
05806097
04602081
Main Catalogue
쮿Front panel with textile EMC gasketing
쮿Hinges can be fitted left or right
쮿Suitable for europacPRO subrack and ratiopacPRO,
compacPRO and propacPRO cases
Delivery comprises (kit)
Order Information
Note
쮿Usable width reduced by 2 HP (hinged side)
쮿Horizontal rail (item 5) for front panel mounting is required,
please order separately
쮿Lateral trim is necessary, please order separately, see page
5.59
05806068
Main Catalogue
쮿For EMC shielding between side panel and top cover or base
plate (sufficient for at least 1 case)
Order Information
Front panel, hinged, shielded,
for mounting on horizontal rails
1
3
2
5
Item Qty Description
1 1 Front panel, hinged, Al, 2.5 mm,
front anodised, rear iridescent green chromated
2 2 Hinge, Zn die-cast, chrome-plated
3 1 Textile EMC gasket
core: foam, sleeve: textile cladding with CuNi coating
4 1 Assembly kit
Height Width H h W w Part no.
U HP mmmmmmmm
384 128.4 89.9 426.4 203.2 20848-611
6 84 261.8 223.2 426.4 203.2 20848-617
Item 5, Horizontal rail Type H-VT heavy duty, recessed
mounting 84 HP, 1 piece (SPQ 10) 34560-784
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
EMC side panel gasket
Item Description Qty/PU Part no.
1Sealing cord, silicone, silver coated,
Ø 2.4 mm, length 2.1 m 1 30850-354
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 57 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.58 Main Catalogue
E 11/2013
Desk-top enclosure – i
Main Catalogue
쮿To individualise case design
Delivery comprises
Order Information
Note
쮿Size 28 HP and further colours available on request
쮿Cannot be combined with front hood
Design elements
05809002
Qty Description
1 Design element, Al extrusion, powder-coated
1 Assembly kit
Description Width Light grey
RAL 7035 Brilliant
blue
RAL 5007
HP Part no. Part no.
Form 1 42 20850-184 20850-299
63 20850-185 20850-300
PPA43761
84 20850-186 20850-301
Form 2 42 20850-190 20850-315
63 20850-191 20850-316
PPA43762
84 20850-192 20850-317
Form 3 42 20850-196 20850-331
63 20850-197 20850-332
PPA43763
84 20850-198 20850-333
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5.59
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
05806069
Main Catalogue
쮿For lateral covering of frame and for producing a continuous
front with front panels and plug-in units
쮿Serves for lateral shielding of side panels simultaneously
Delivery comprises (kit)
Order Information
05806103
Main Catalogue
쮿For vertical EMC shielding between shielded front panels and
side panel
Delivery comprises
Order Information
Trim, front, for EMC shielding
Item Qty Description
12 Lateral trim, Al extrusion,
visible surface painted RAL 7016
2 1 Textile EMC gasket
3 1 Assembly kit
For case height h Part no.
Umm
284 24576-017
3 128.5 24576-117
4172.9 24576-217
6 261.8 24576-417
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Trim, rear, for EMC shielding
Item Qty Description
1 2 EMC contact strip, Al extrusion
2 1 Textile EMC gasket
3 1 Assembly kit
Height Height Part no.
Umm
265.55 24576-018
3110
24576-118
4154.45 24576-218
6 243.35 24576-418
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 59 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.60 Main Catalogue
E 10/2012
Desk-top enclosure – i
Main Catalogue
쮿With powder-coated carrying bar
쮿Can be locked in 30° increments
쮿Load-carrying capacity 20 kg
Delivery comprises (Kit)
Order Information
Note
쮿To fit the tip-up carrying handle, holes must be drilled in the side
panel
쮿Readily prepared cases (3 U and 4 U), for mounting the tip-up
carrying handle see page 5.52
05806098
Main Catalogue
쮿Load-carrying capacity: 20 kg
Delivery comprises (Kit)
Order Information
Note
쮿Holes must be drilled into the side panels to fix the strap handle
쮿Side panels with holes already drilled available on request
쮿Usable from case depth of D = 326 mm
Tip-up carrying handle
05806101
Item Qty Description
11 Carrying bar, Al extrusion, powder-coated, RAL 7016
2 2 Handle side part, Zn, die-cast, powder-coated,
length 180 mm
3 2 Safety insert, St, 1.5 mm, black
4 1 Assembly kit for side panel mounting
For case width Part no.
HP
28 24576-070
42 24576-071
63 24576-072
84 24576-073
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Strap handle
Item Qty Description
1 1 Band, spring steel,
handle, flexible plastic, grey, RAL 7016
2 2 Cover, grey, RAL 7016
3 1 Assembly kit
Description Part no.
Strap handle with adaptor 20850-249
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 60 Montag, 17. September 2012 7:46 19
5.61
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
05806070
Main Catalogue
쮿Subsequent mounting possible without modification or tools
쮿Filter change without opening the case, IP protection code not
affected
Delivery comprises (Kit)
Order Information
Note
쮿For optimum ventilation feet must be fixed to the case, please
order separately
Air filter
2
3
1
Item Qty Description
1 1 Filter holder, Al, 1 mm, powder-coated, RAL 9006
2 1 Filter mat, synthetic fibre
3 1 Velcro
For case width Air filter Replacement
filter 1 piece
HP Part no. Part no.
28 24576-093 64571-033
42 24576-094 64571-034
63 24576-095 64571-035
84 24576-096 64571-036
Tip-up foot in plastic silver, similar to RAL 9006,
4pieces 20603-001
Plastic tip-up foot anthracite, similar to RAL 7016,
4pieces 20603-002
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 61 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.62 Main Catalogue
E 10/2012
Desk-top enclosure – i
05806071
05806072
1) Front panel
05806073
Lock for front hood
Main Catalogue
쮿From acrylic glass, hinged, removable
쮿Mounting of hinges at top or bottom
쮿Lock (max. 2) retrofittable
쮿Lateral cover (item 5) also serves as vertical EMC shielding of
side panels
Delivery comprises (kit)
Order Information
Note
쮿Cannot be combined with design elements
쮿Other heights available on request
쮿Before assembly of hood feet must be fixed to case;
please order separately
Front hood 3 U
16
1)
147,2
11
180°
3
Item Qty Description
1 1 Hood, PMMA, tinted blue grey, acrylic glass, 3 mm
2 2 Hinge, PC, UL 94 V-0, RAL 7016
3 2 Handle, PC, UL 94 V-0, RAL 7016
4 2 Retainer, UL 94 V-0, PC, RAL 7016
5 2 Lateral trim, Al extrusion, visible surface painted
RAL 7016
6 1 Assembly kit
For case width Part no.
HP
28 24576-080
42 24576-081
63 24576-082
84 24576-083
Lock for front hood Locking cylinder, key, assembly kit,
PU 1 kit 60850-171
Plastic tip-up foot silver, similar to RAL 9006, 4 pieces 20603-001
Plastic tip-up foot anthracite, similar to RAL 7016,
4pieces 20603-002
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 62 Montag, 17. September 2012 7:46 19
5.63
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
iMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
쮿Increases the distance between rear panel and parking surface
(when used vertically)
쮿Simplifies cable routing
쮿Increased shock and vibration damping
쮿Required for mounting rear hood
Delivery comprises
Order Information
05806075
05806076
Main Catalogue
Delivery comprises (kit)
Order Information
Note
쮿To fit the rear hood, feet must be fitted to the rear panel;
please order separately
Foot for rear hood
ppa45113 ppa45106
Item Qty Description
1 2 Foot, PU foam
1 1 Assembly kit
For cabinet height Height H Part no.
Umm
3147.9 24576-393
4 192.3 24576-394
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Rear hood
Item Qty Description
1 1 Hood, Al, 1 mm, RAL 9006, fixing with knurled screws
2 1 Assembly kit
HeightWidthABCDE Part no.
U HP mmmmmmmmmm
342 246 230 213 145.9 64 24576-086
3 63 352.7 336.7 319.7 145.9 64 24576-087
384 459.4 443.4 426.4 145.9 64 24576-088
4 63 352.7 336.7 319.7 190.4 108.5 24576-091
484 459.4 443.4 426.4 190.4 108.5 24576-092
Foot for rear hood for case height 3 U, PU foam, black,
PU 2 pieces 24576-393
Foot for rear hood for case height 4 U, PU foam, black,
PU 2 pieces 24576-394
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 63 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.64 Main Catalogue
E 10/2012
Desk-top enclosure – i
Order Information
06103057
propacPRO:
D = board length - 47.5 mm; n = 1 for 160 mm board length;
n = 2 for 220 mm board length; n=4 for 340 mm board length
Note
쮿Please order assembly kit for mounting plate separately
쮿Fixing strips required for partial width, please order separately
쮿Other versions on request
쮿Dimensions side panel with horizontal rail see page 5.53
Mounting plates
Mounting plate for fixing of heavy components
Mounting plate over full width:
mounting is onto the side panels
Mounting plate over partial width:
mounting is onto one side panel and a fixing strip or
onto 2 fixing strips
Fixing strip for partial widths
05812001 06102501 05806100
Board lengths
Al, 1.5 mm; for mounting over partial width,
please order fixing strips separately St, 2 mm, zinc-plated;
is bolted from front to rear onto the horizontal rails;
to fix mounting plates
Width W W
HP mm mm 1 piece 1 piece
42 217.99 160 34562-746 30840-021
42 217.99 220 34562-750 30840-033
63 324.67 160 34562-747 30840-021
63 324.67 220 34562-751 30840-033
84 431.35 160 34562-748 30840-021
84 431.35 220 34562-752 30840-033
84 431.35 340 34562-760 30840-057
Assembly kit for mounting plate, PU 1 kit
(Torx countersunk screw M4 x 5, St, zinc-plated,
12 pieces; screw M4 x 6, St, zinc-plated,
10 pieces; M4 square nut, St, zinc-plated,
10 pieces)
24560-184
Assembly kit for fixing strips for partial width
mounting plates, Torx screw M2.5 × 5, St,
zinc-plated, PU 100 pieces
M2.5 × 5, St, zinc-plated, PU 100 pieces
24560-146
5_2_propacPRO_e.fm Seite 64 Montag, 17. September 2012 7:46 19
5.65
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
05806109
Main Catalogue
쮿The EMC contact strip is clipped onto the horizontal rail and
forms a conductive link to front or rear panel
쮿Can be used for front/rear horizontal rails type VT (recessed)
Delivery comprises
Order Information
aza43284
Main Catalogue
쮿Protective GND/earthing connections in accordance with:
DIN EN 50178/VDE 0160
DIN EN 60950/VDE 0805
DIN EN 61010-1/VDE 0411 part 1
DIN EN 61010-1A2/VDE 0411 part 1A1
쮿VDE tested
Order Information
02908053
02908052
Main Catalogue
Delivery comprises
Order Information
EMC gasket, stainless steel,
between front/rear panel and horizontal rail
Item Qty Description
110/100 EMC gasket, St, stainless
Width Length Qty/PU Part no.
HP mm pieces
28 131.78 10 24560-229
42 202.9 10 24560-231
63 304.5 10 24560-233
84 416.56 10 24560-235
84 416.56 100 24560-236
GND/earthing kit
Description Part no.
GND/earthing kit, Cu wire 1.5 mm2, PVC sleeve, green/
yellow, links side panels, base and rear panel, 1 piece 21102-001
Cable holder
919
17
14
26,5
46
20,2
Ø
4,4
Ø
3
Ø
4,4
Ø
3
Item Qty Description
1 2 Cable holder, ABS, UL V-94 0, RAL 7016,
detent for cables between 8 mm and 12 mm
2 1 Drilling template, two drill holes each per holder are
needed in rear panel
31 Assembly kit
Description Part no.
Cable holder 24575-800
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_2_propacPRO_e.fm Seite 65 Montag, 1. Oktober 2012 6:01 06
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.66 Main Catalogue
E 10/2012
Desk-top enclosure – i
Text
Mounting position horizontal/central rails
2 U
05806084
3 U
05806085 05809050
4 U (3 + 1) "Z" (EMC shielding with 2 horizontal rails)
05806086 06106051
6 U 6 U (2 x 3)
05806087 05806088
H-VT H-VT
H-VT H-VT
H-VT
H-VT
H-VT
H-VT
H-ST
H-VT
H-MZ
H-STH-VT
H-KD H-MZ
ST
H-VT
H-VT
2xH-KD
H-VT
H-VT
H-ST
H-VT
H-MZ
H-VT
H-VT
H-VT
H-VT
ST
H-ST
H-VT
H-MZ
H-ST
H-VT
H-MZ
H-VT
“Z”
“Z
2xH-KD
H-VT
H-VT
H-VT
H-ST
H-VT
H-MZ
H-ST
H-VT
H-MZ
H-ST
H-VT
H-MZ
5_2_propacPRO_e.fm Seite 66 Montag, 17. September 2012 7:46 19
5.67
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Main Catalogue
Order Information
Note
쮿Further horizontal rails see from page 6.27
쮿Fitting options see page 5.66
Horizontal rails to front/centre/rear
For indiect
backplane fixing
with insulation
strip
For direct
backplane fixing For direct fixing
of connectors in
accordance with
EN 60603-2
(DIN 41612)
Front horizontal
rails Stainless steel
EMC gasket
between
horizontal rail
and
horizontal rail
Horizontal rail
type H-VT
robust,
with EMC gasket
06197011 06197011 06197011 bza45877 06106052
"heavy" "heavy" "heavy" "heavy"
Type H-ST Type H-VT Type H-MZ Type H-KD
standard long lip with Z-rail short lip
06197011 06197009 06197015 06197008
Al extrusion,
anodised finish,
conductive surface,
with printed HP
markings
Al extrusion,
anodised finish,
conductive surface,
with printed HP
markings
Al extrusion,
anodised finish,
conductive surface,
with printed HP
markings
Al extrusion,
anodised finish,
conductive surface,
with printed HP
markings
item 1: metal strip,
Al, 1 mm,
item 2: EMC
stainless steel
gasket; for shielding
of 2 horizontal rails
positioned directly
one above the other
if assembly area is
divided vertically
horizontal rail:
Al extrusion,
anodised,
conductive contact
surface
for cover plates on
shielded cases
Usable length Length
HP mm 1 piece
(SPQ 10)1) 1 piece
(SPQ 10)1) 1 piece
(SPQ 10)1) 1piece
(SPQ 10)1) PU 1 kit 1 piece
28 147.32 34560-528 34560-728 34560-928 34560-228 24562-528 24576-028
42 218.44 34560-542 34560-742 34560-942 34560-242 24562-542 24576-042
63 325.12 34560-563 34560-763 34560-963 34560-263 24562-563 24576-063
84 431.80 34560-584 34560-784 34560-984 34560-284 24562-584 24576-084
Torx panhead screw , M4 × 14,
St, zinc-plated, PU 100 pieces 24571-371 24571-371 24571-371 24571-371 24571-371
Torx panhead screw , M 4 × 10,
St, zinc-plated, necessary if
guide rail is screwed to slot 1,
PU 100 pieces
––
24571-372 24571-372 24571-372
Perforated rail for connector
mounting with insulation strip
see page 5.69 – – – – –
Z-rail for connector mounting
without insulation strip see page 5.69–––––
Insulation strips see page 5.68 – – –
Threaded inserts see page 5.68 5.68 5.68 5.68
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
5_2_propacPRO_e.fm Seite 67 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.68 Main Catalogue
E 10/2012
Desk-top enclosure – i
05806089
Main Catalogue
쮿For indirect backplane mounting (with insulation strip)
쮿For 6 U propacPRO case
Delivery comprises (kit, item 1 to 4 are pre-mounted)
Order Information
Order Information
Horizontal rails, centre, type ST-C
Item Qty Description
1 1 Horizontal rail, Al extrusion, anodised, contact surfaces
conductive
2 2 Adaptor plate, Al
3 2 Threaded insert, M2.5, St, zinc-plated
4 2 Countersunk screw, M4 x 14
5 4 Pan head screw, M4 x 6
Usable width Length Part no.
HP mm
84 431.8 24575-474
Insulation strip 84 HP, PBT UL 94 V-0, grey,
PU 10 pieces 24560-884
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Threaded inserts, perforated strips, insulation strips
Threaded insert Perforated strip Insulation strip
M2.5 M3 (item 1)
06103056 BZA45853 BZ6749
Threaded insert
required for fixing the front panel to the
horizontal rail; St, zinc-plated;
use collar screw 12.3 mm, see page
6.64
Perforated strip
for centring shielded
plug-in units, Al, 1 mm,
please order
grub screw separately
Insulation strip
for insulated
backplane mounting;
PBTUL94V-0,
grey
Usable length Length Length Length
HP mm 1 piece
(SPQ 10)1) 1piece
(SPQ 10)1) mm 1 piece (SPQ 10)1) mm PU 10 pieces
28 146.82 34561-328 147.12 30845-197 144.20 24560-828
42 217.94 34561-342 – 218.24 30845-211 210.40 24560-842
63 324.62 34561-363 324.92 30845-232 316.88 24560-863
84 431.30 34561-384 34561-484 431.60 30845-253 428.64 24560-884
5
2
5,08
Accessories
Grub screw M2.5 x 8,
PU 100 pieces 21100-276 – –
Grub screw M2.5 x 9,
PU 100 pieces –– 21101-359
Grub screw M3 x 8,
PU 100 pieces 21100-646 – –
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least
the SPQ quantity or a multiple thereof
2) Part no. includes one packing unit (PU); delivery is exclusively made in PU
5_2_propacPRO_e.fm Seite 68 Montag, 17. September 2012 7:46 19
5.69
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Order Information
Z-rails, perforated rails
Z-rail for connectors Perforated rail
DIN EN 60603-2, DIN 41612
item 1 31-pin, DIN 41617 EN 606032, DIN 41612
item 1
BZA45849 BZA45850 BZA45848
06708063 06708051
for connector mounting on
ST horizontal rails,
please order threaded insert and
screw separately
for connector mounting on
ST horizontal rails,
please order threaded insert and
screw separately
for connector mounting on
VT horizontal rails,
please order threaded insert and
screw separately
Usable length Length
HP mm 1 piece 1 piece PU 4 pieces
28 142.24 30822-033 20822-049
42 213.36 30822-047 20822-050
60 304.80 30822-065 30819-783 20822-047
84 426.70 30822-089 30819-808 20822-048
Item 3, Torx panhead screw
to fix connector to perforated rail,, M2.5 × 7,
PU 100 pieces 24560-147 24560-147 24560-147
Item 2, Torx panhead screw,
to fix perforated rail to horizontal rail, M2.5 × 10,
PU 100 pieces 24560-148 24560-148 24560-148
172,5
172,5
175,5
2
1
3
3,0
9,75
12,75
2
1
3
12,75
5_2_propacPRO_e.fm Seite 69 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.70 Main Catalogue
E 10/2012
Desk-top enclosure – i
Order Information
쮿Subdivision of the 6 U assembly area into:
2 x 3 U
1 x 6 U
쮿Designed to accept euroboards (100 mm high) and double
euroboards (233.35 mm high)
Note
쮿Please order EMC gasketing kit for horizontal rails separately,
see page 6.54
쮿Please order perforated strips for horizontal rails separately, see
page 5.68
쮿Please order rear centre horizontal rail separately, see page
5.68
Combined mounting (6 U and 2 x 3 U one above the other)
Combined mounting Splitting extrusion
Horizontal and
vertical subdivision
(incl. front panel for
stainless steel EMC gasket)
Unshielded
front panel,
6U,2HP
item 5
Front panel for
textile EMC gasket,
6U, 2HP
item 5
for combined
mounting
item 2
05806108 bza45819 06102501 06102501 06102501
item 1: 2 front horizontal rails (H-KD),
Al extrusion, anodised;
item 2: 2 rear horizontal rails (AB),
Al extrusion, anodised;
item 3: threaded insert, St,
zinc-plated;
item 4: Zn die-cast support member;
item 5: front panel 2 HP, 6 U,
shielded;
with EMC stainless steel gasket;
84:0 without items 4, 5
Al, 2.5 mm,
front anodised,
rear iridescent green
chromated
Al, 2.5 mm,
U-profile with notch,
6 U, 2 HP
6 U, Zn die-cast;
splitting extrusion is
inserted in the grid
holes of the
horizontal rail;
the splitting extrusion
can be bolted
Width pitch T1:T2
HP PU 1 kit 1 (SPQ 5) 1 piece (SPQ 5)1) 1 piece
20:62 24562-420
30847-472 30849-140 64560-010
40:42 24562-440
42:40 24562-442
63:19 24562-463
84:0 24562-484
Torx countersunk screw
M4 × 14, zinc-plated, PU 100 pieces
for fixing splitting extrusion/horizontal rail ––
24560-145
Panhead screw
M2.5 × 10, St, zinc-plated, PU 100 pieces
for fixing horizontal rail/splitting extrusion 24560-179
Pozidrive/slotted collar screw
M2.5 x 12.3, St, nickel-plated, PU 100 pieces 21101-101 21101-101
Pozidrive/slotted collar screw
M2.5, black, zinc-plated, PU 100 pieces 21101-102 21101-102
Washer
2.7 x 5 x 1, plastic PA 6, PU 100 pieces 21101-121 21101-121
Textile gasket, core: foam,
sleeve: textile cladding with CuNi coating,
UL 94 V-0, PU 10 pieces 21101-855
5_2_propacPRO_e.fm Seite 70 Montag, 17. September 2012 7:46 19
5.71
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Order Information
Horizontal board mounting
Horizontal board mounting
Board cage Front frame for
EMC gasketing Front frame, unshielded
05806092 05806091 bpa45913 bza43061
(1TE = 1HP, 1HE = 1U)
Struts die-cast zinc;
horizontal rails front and rear;
threaded insert, St, zinc-plated;
fixing material kit;
for horizontal mounting of
double-height euroboards in
3or4U high
subracks/cases;
54 HP space required; please
order front frame for EMC
gasketing separately
2 horizontal trims,
AI 2.5 mm, front anodised,
rear iridescent green chromated;
2 vertical trims, Al extrusion,
clear passivated;
stainless steel EMC gasket;
front frame forms the
contact between subrack and the
sub-assemblies
Al, 2.5 mm, clear anodised;
front frame with cut-out,
clear internal width w = 266.35 mm
Height H Usable
height h
HP
Other dimensions and
options
UHorizontal rail,
front Horizontal rail,
rear PU 1 kit PU 1 kit 1 piece
320 24564-117 24564-109
34564-108
320 24564-118 24564-109
34564-109
428 24564-217 24564-209 34564-208
Assembly tool, for mounting the
EMC gasket (stainless steel) 24560-270
* For direct backplane mounting
273.98 = 54 TE
h
H
273,98 = 54 TE
w
5_2_propacPRO_e.fm Seite 71 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.72 Main Catalogue
E 10/2012
Desk-top enclosure – i
05806093
02906050
Main Catalogue
쮿Static load-carrying capacity 25 kg per foot
쮿Tip-up feet can be used instead of the pre-mounted case feet
쮿Fixing holes provided in bottom of case
Delivery comprises (kit)
Order Information
AZA43836
02908051
쮿Can be used instead of the round standard feet
쮿Fixing holes provided in bottom of case
쮿Secure case stance with slip-proof rubber inserts
쮿Load carrying capacity: 50 kg per foot, max. case weight 40 kg
Order Information
1) Part no. comprises 1 piece;
delivery is in standard pack quantity (SPQ):
please order a minimum of 10 feet or a multiple
Note
쮿Delivery is in standard pack multiples;
pricing is per individual item
Plastic tip-up feet
Item Qty Description
1 4 Foot, PA, UL 94 V-0
2 4 Anti-slip protection, TPE
3 2 Tip-up device, PA, UL 94 V-0
4 1 Assembly kit
Description Part no.
Plastic tip-up foot anthracite, similar to
RAL 7016, 4 pieces 20603-002
Plastic tip-up foot silver, similar to
RAL 9006, 4 pieces 20603-001
Cheesehead screw with slot M4 × 12, St, zinc-plated,
PU 100 pieces 21101-211
Hexagon nut M4, St, zinc-plated, PU 100 pieces 21100-211
Spring washer A4, St, zinc-plated, PU 100 pieces 21100-207
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Tip-up feet made of die-cast aluminium
41
20
Ø7,8
15,5
Ø4,6
Ø3,1
15
20 16,6
1
Description Qty Part no.
Foot with tip-up,
Al die-cast, silver 1 piece (SPQ 10)1) 10603-002
Foot without tip-up,
Al die-cast, silver 1 piece (SPQ 10)1) 10603-001
Cheesehead screw with slot M4 × 12, St, zinc-plated,
PU 100 pieces 21101-211
Hexagon nut M4, St, zinc-plated, PU 100 pieces 21100-211
Spring washer A4, St, zinc-plated, PU 100 pieces 21100-207
5_2_propacPRO_e.fm Seite 72 Montag, 17. September 2012 7:46 19
5.73
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Order Information
Guide rails for plug-in units and frame type plug-in units, one-piece,
groove width 2 mm
Assembly
- can be clipped into Al extruded
horizontal rails
- can be clipped into 1.5 mm thick
plates
Storage temperature
from -40 °C ... 130 °C
For plug-in units and frame type plug-in units
Standard With DIN connector fixing as standard
06102001 06101501
up to 220 mm length, PBT, UL 94 V-0;
multi-piece from 280 mm length,
end piece PBT, UL 94 V-0,
central section Al extrusion
PBT, UL 94 V-0, red,
connector is clipped directly onto the guide rails;
for euroboards, 100 x 160 mm or 100 x 220 mm only
Board
lengths Groove
width Colour
mm mm mm PU 10 pieces 1 pair (SPQ 10)1)
70 2red – –
70 2 grey
160 2red 24560-351 64560-074
220 2 red 24560-353 64560-075
280 2red 24560-379
340 2 red 24560-380
Dimension drawings see page 6.40 6.40
Accessories
Retention screw,
PU 100 pieces 24560-141 24560-141
ESD clip, PU 50 pieces
description see page 6.41 24560-255 24560-255
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or
a multiple thereof
2) Part no. includes one packing unit (PU); delivery is exclusively made in PU
Further guide rails see page 6.35
5_2_propacPRO_e.fm Seite 73 Montag, 17. September 2012 7:46 19
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.74 Main Catalogue
E 10/2012
Desk-top enclosure – i
Order Information
Guide rails type "accessories", one-piece, groove width 2 mm and
2.5 mm
Assembly
- can be clipped into horizontal rails
in Al extrusion
- can be clipped into 1.5 mm thick
plates
storage temperature
from -40 °C ... +130 °C
Guide rails Guide rails Guide rails
"Accessories" "Accessories" strengthened for heavy modules,
Al extrusion, silver,
robust version
06102002 06102005 06102005
up to 280 mm length, PBT, UL 94 V-0;
multi-piece from 280 mm length,
end piece PBT, UL 94V-0,
middle section Al extrusion
PBT UL 94 V-0,
red support beam of guide rails adds to
strengthening
Al extrusion; is screwed to horizontal rail
"heavy" with retention screws
Board
lengths Groove
width Colour
mm mm mm PU 10 pieces 1 piece (SPQ 50) 1 piece (SPQ 50)1)
100 2red – – –
160 2 red 24560-373 64560-076
160 2grey 34562-881
220 2 red 24560-374 64560-078
220 2grey 34562-882
280 2 red/
silver 24560-375 64560-080 34562-883
340 2red/
silver 24560-376 34562-884
400 2 silver 34562-885
160 2.5 silver 34564-881
220 2.5 silver 34564-882
280 2.5 silver 34564-883
340 2.5 silver 34564-884
400 2.5 silver 34564-885
Dimension drawings see page 6.40 6.40 6.40
Accessories
Retention screw,
PU 100 pieces 24560-141 24560-141 24560-157
ESD clip, PU 50 pieces
description see page 6.41 24560-255 24560-255
Board locking, red,
PU 10 pieces,
description see page 6.41 24560-377 24560-377
Board handle, red,
PU 10 pieces,
description see page 6.41 24560-378 24560-378
Identification strips for board
handle, red,
PU 1 sheet = 438 pieces,
description see page 6.41
60817-228 60817-228
Coding see page 6.41 6.41
1) SPQ (standard pack quantity): Order number includes 1 piece, but delivery is exclusively made in standard pack quantity
(SPQ); please order at least the SPQ quantity or a multiple thereof
2) Part no. includes one packing unit (PU); delivery is exclusively made in PU
Further guide rails see page 6.35
5_2_propacPRO_e.fm Seite 74 Montag, 17. September 2012 7:46 19
5.75
Desk-top enclosure – i
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Order Information
Order Information
Divider plate
Divider plate
Mounting position when
stainless steel EMC gasket is used Mounting position when
textile EMC gasket is used
front rear front rear
bpa45911 06105078
bpa45912
Stainless steel, 1 mm, is mounted by clipping onto horizontal rail,
space requirement on component side 2 mm;
mounting direction varies with shielding design (EMC stainless steel or textile gasket);
retrofitting the divider plate in an already-assembled subrack/case
will first require dismantling of the horizontal rails;
where front panels are unshielded, both mounting directions are possible
Height Depth A B H
U mm mm mm mm PU 10 pieces
3160 158.3 135.0 113.5 34562-761
3 220 218.3 195.0 113.5 34562-762
6160 158.3 135.0 246.9 34562-763
6 220 218.3 195.0 246.9 34562-764
Air baffle for slots
Air baffle Air baffle with front panel
without front panel U front panel for textile EMC gasket
06108085 06108088
06101507
Al, 1 mm, incl. assembly kit;
prevents an air short circuit in unoccupied slot positions;
is pushed into the groove of the guide rails
Air deflector, Al, 1 mm,
front panel, Al extrusion, 2.5 mm,
front anodised, rear conductive;
EMC textile gasket, fixing materials kit prevents an air
short-circuit where slots are unoccupied;
is pushed into the groove of the guide rails
Depth Width Height
mm HP U 1 piece 1 piece
160 4 3 34562-823
20848-728
160 4 6 34562-826 20848-736
160 8 3 34562-833
20848-730
160 8 6 34562-836
20848-738
160 12 334562-843
20848-732
160 12 6 34562-846
20848-740
220 4 3 34562-824
20848-729
220 4 6
34562-827
20848-736
220 8 3
34562-834 20848-731
220 8 6
34562-837 20848-739
220 12 3
34562-844 20848-733
220 12 6
34562-847 20848-741
5_2_propacPRO_e.fm Seite 75 Montag, 17. September 2012 7:46 19
Desk-top cases – b
Overview . . . . . 0
Cabinets . . . . . . 1
Wall mounted
cases . . . . . . . . 2
Accessories for
cabinets and wall
mounted cases 3
Climate control 4
Desk-top cases 5
Subracks/
19" chassis . . . 6
Front panels,
plug-in units . . 7
Systems . . . . . . 8
Power supply
units . . . . . . . . . 9
Backplanes . . 10
Connectors, front
panel component
system . . . . . . 11
Appendix . . . . 12 Downloads and further important information can be found
on the Internet under www.schroff.biz
5.76 Main Catalogue
E 10/2012
bMain Catalogue
02004009
02004079
Flexible expansion options, for 19" components e.g. plug-in unit units, or for individual expansion
Standards
Interior dimensions in accordance with: IEC 60297-3-101
Type of protection IP 20 in accordance with IEC 60529
GND/earth connections in accordance with:
DIN EN 50178 / VDE 0160
DIN EN 60950 / VDE 0805
DIN EN 61010-1 / VDE 0411 part 1
DIN EN 61010-1A2 / VDE 0411 part 1/A12
5_3_compacPRO_e.fm Seite 76 Montag, 17. September 2012 9:12 21
Desk-top cases – b
5.77
Main Catalogue
E 10/2012
bMain Catalogue
Robust desk-top case for 19" components in accordance with
IEC 60297-3-10x or for individual electronics assemblies
Front and rear identical, depth-symmetrical construction
Highly robust thanks to die-cast frame (front/rear)
Side panel with integrated handle function
Desk-top cases
Complete case
Pre-configured case, prepared for 19" components
Case height 3 U and 6 U
Case
Case height 2 U, 3 U, 4 U and 6 U
02009005 02004006
Extensive accessory range
02004002
ServicePLUS from page 5.4
e.g. modifications (special colours, special depths,
cut-outs in top cover, base plate or side panels)
e.g. assembly service from 1 piece
www.schroff.biz/ServicePLUS
30407004
MicroTCA
Overview . . . 5.76
compacPRO
Complete cases
3, 6 U . . . . . . . . . . 5.78
Cases 2, 3, 4 U . . 5.79
6 U cases . . . . . . . 5.80
Accessories
Filler angle . . . . . 5.81
Cable holder . . . . 5.81
Front panel/rear
panel . . . . . . . . . . 5.82
Rear feet . . . . . . . 5.83
Edge protection. 5.83
Hood . . . . . . . . . . 5.84
Front door . . . . . 5.85
Handle . . . . . . . . 5.86
GND/earthing . . . 5.86
Feet . . . . . . . . . . 5.87
Horizontal rail . 5.88
Threaded inserts 5.90
Guide rails and
ESD clips . . . . . . . 5.92
Mounting plates . 5.94
Combined
mounting . . . . . . 5.95
Horizontal board
assembly . . . . . . 5.96
Air flow barrier . . 5.97
Dimensions . . . . . 5.98
ServicePLUS . . 5.4
5_3_compacPRO_e.fm Seite 77 Montag, 17. September 2012 9:12 21
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.78 Main Catalogue
E 10/2012
Desk-top cases – b
02009005
02004054
02008050
bMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days
Desk-top case with pre-configured components in accordance
with IEC 60297-3-101; prepared for 19" components such as
plug-in units and euroboards
For backplane mounting with insulation strips
Ventilation slots in base plate
Ventilation slots in rear panel
Delivery comprises (Kit, items 1, 2, 6, 8 fitted)
Order Information
Maximum mounting depth = D - 21 (open space: front panel - rear panel)
Note
Dimensions of case, side panel see from page 5.98
Complete cases 3 and 6 U
ServicePLUS see page 5.4
20 20
D
w
W
5
h
H
1
9
2
4
8
12
7
5
11
10
6
3
Item Qty Description
3 U 6 U
1 2 4 Side panel, Al extrusion, powder-coated, RAL 7016
2 2 2 Frame, Al die-cast, powder-coated, RAL 7016
3 1 1 Cover plate, Al, 1.5 mm, powder-coated, RAL 9006,
with GND/earthing tag
411Base plate with 4 rows of ventilation slots, Al, 1.5 mm,
powder-coated, RAL 9006, with GND/earthing tag
5 - 2 Side plate powder-coated, RAL 9006, Al, 0.8 mm
6 4 4 Tip-up foot with anti-slip protection, PA, RAL 7016,
UL 94 V-0
7 2 2 Cover bracket, Al extrusion, anodised, cut edges plain
822Horizontal rail, Al extrusion, with threaded insert, St,
M2.5
9 2 2 Rear horizontal rail, Al extrusion, with threaded insert,
St, M2.5 and insulation strip, PBT, UL 94 V-0
(for indirect backplane mounting)
10 - 1 Centre horizontal rail, Al extrusion, anodised,
conductive surfaces, with two threaded inserts, St,
M2.5 and two insulation strips, PBT, UL 94 V-0
11 1 1 Rear panel with 1 row of ventilation slots, Al,
anodised, 2 mm for 28, 42 and 63 HP,
2.5 mm for 84 HP
12 10/
20 10/
20 Guide rail for 160 mm board length, PBT, UL 94 V-0,
28/42 HP 10 pieces, 63/84 HP 20 pieces
13 1 1 GND/earthing kit
14 1 1 Assembly kit, also allows the fitting of a full-width front
panel
Height H Width W Depth D Usable width Part no.
ww
UmmmmHPmm
3186 271 28 148
14575-114
3 186 331 28 148
14575-115
3257 271 42 219
14575-134
3 257 331 42 219 14575-135
3257 391 42 219 14575-136
3 364 271 63 326 14575-154
3364 331 63 326 14575-155
3 364 391 63 326
14575-156
3471 271 84 432 14575-174
3 471 331 84 432 14575-175
3471 391 84 432 14575-176
3 471 511 84 432 14575-178
6471 391 84 432
14575-476
6 471 451 84 432
14575-477
5_3_compacPRO_e.fm Seite 78 Montag, 17. September 2012 9:12 21
5.79
Desk-top cases – b
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
b
Desk-top case, pre-configures, for individual assembly
For backplane mounting with insulation strips
Ventilation slots in base plate
Delivery comprises (Kit, items 1 and 2 fitted)
Order Information
Cases 2, 3 and 4 U
02004005
02004054
02004053
ServicePLUS see page 5.4
20 20
D
w
W
5
h
H
3
2
4
5
1
6
Item Qty Description
1 2 Side panel, Al extrusion, powder-coated, RAL 7016
2 2 Frame, Al die-cast, powder-coated, RAL 7016
3 1 Cover plate, Al, 1.5 mm, powder-coated, RAL 9006,
with GND/earthing connection
4 1 Base plate with 4 rows of ventilation slots, Al, 1.5 mm,
powder-coated RAL 9006, with earthing connection
5 4 Case foot with anti-slip protection, PC, black
6 8 Fixing adaptor for cover plate, prefitted
71 Assembly kit, also allows the fitting of a full-width front
panel, two cover brackets or a rear panel
Height Usable
width Width
WWidth
wHeight
HHeight
hDepth
DPart no.
U HP mmmmmmmmmm
242 257 219 102.6 84.4 271 14575-023
2 42 257 219 102.6 84.4 331 14575-025
242 257 219 102.6 84.4 391 14575-027
2 84 471 432 102.6 84.4 271 14575-063
284 471 432 102.6 84.4 331 14575-065
2 84 471 432 102.6 84.4 391
14575-067
328 186 148 147.1 129.3 271 14575-103
3 28 186 148 147.1 129.3 331
14575-105
342 257 219 147.1 129.3 271 14575-123
3 42 257 219 147.1 129.3 331 14575-125
342 257 219 147.1 129.3 391 14575-127
3 63 364 326 147.1 129.3 271 14575-143
363 364 326 147.1 129.3 331 14575-145
3 63 364 326 147.1 129.3 391 14575-147
384 471 432 147.1 129.3 271 14575-163
3 84 471 432 147.1 129.3 331 14575-165
384 471 432 147.1 129.3 391 14575-167
3 84 471 432 147.1 129.3 451 14575-169
384 471 432 147.1 129.3 511 14575-171
4 42 257 219 191.6 173.8 271 14575-223
442 257 219 191.6 173.8 331 14575-225
4 63 364 326 191.6 173.8 271 14575-243
463 364 326 191.6 173.8 331 14575-245
4 63 364 326 191.6 173.8 391 14575-247
484 471 432 191.6 173.8 331 14575-265
4 84 471 432 191.6 173.8 391 14575-267
484 471 432 191.6 173.8 451 14575-269
4 84 471 432 191.6 173.8 511 14575-271
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_3_compacPRO_e.fm Seite 79 Montag, 17. September 2012 9:12 21
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.80 Main Catalogue
E 10/2012
Desk-top cases – b
02004006
02004055
02004056
b
Desk-top case, pre-configured, for individual assembly
For backplane mounting with insulation strips
Ventilation slots in base plate
Delivery comprises (Kit items 1, 2 and 5 fitted)
Order Information
6 U cases
ServicePLUS see page 5.4
4
7
6
5
3
2
1
20 20
D
w
W
5
h
H
Item Qty Description
1 4 Side panel parts, Al extrusion, powder-coated,
RAL 7016, 2 x 3 U
2 2 Frame, Al die-cast, powder-coated, RAL 7016
3 1 Cover plate, Al, 1.5 mm, powder-coated, RAL 9006,
with GND/earthing tag
4 1 Base plate with 4 rows of ventilation slots, Al, 1.5 mm,
powder-coated, RAL 9006, with GND/earthing tag
5 2 Side plate, Al, 0.8 mm, powder-coated, RAL 9006
6 4 Case foot with anti-slip protection, PC, black
7 8 Fixing adaptor for cover plate, prefitted
8 1 Assembly kit also allows the fitting of a full-width front
panel, two cover brackets or a rear panel
Usable
width Width
WWidth
wHeight
HHeight
hDepth
DPart no.
HP mm mm mm mm mm
63 364 326 280.5 262.9 331 14575-445
63 364 326 280.5 262.9 391 14575-447
84 471 432 280.5 262.9 271 14575-463
84 471 432 280.5 262.9 331 14575-465
84 471 432 280.5 262.9 391 14575-467
84 471 432 280.5 262.9 451 14575-469
84 471 432 280.5 262.9 511 14575-471
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_3_compacPRO_e.fm Seite 80 Montag, 17. September 2012 9:12 21
5.81
Desk-top cases – b
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
02005002
02004062
b
To cover the sides of the frame and to create a continuous front
plane with plug-in units and partial-width front panels
This filler angle is recommended when fitting horizontal rails
Delivery comprises
Order Information
Note
Fixing material is supplied with case
02908053
02908052
AccessoriesI/B
Delivery comprises (kit)
Order Information
Filler angle
Item Qty Description
1 2 Filler angle, Al extrusion, anodised, cut edges plain
Height Part no.
U
224575-019
324575-119
424575-219
624575-419
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Cable holder
919
17
14
26,5
46
20,2
Ø
4,4
Ø
3
Ø
4,4
Ø
3
Item Qty Description
1 2 Cable bracket, ABS, UL V-94 0, RAL 7016,
detent for cables between 8 mm and 12 mm
2 1 Drilling template, two drill holes each per bracket are
needed in rear panel
31 Assembly kit
Description Part no.
Cable holder 24575-800
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
5_3_compacPRO_e.fm Seite 81 Montag, 17. September 2012 9:12 21
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.82 Main Catalogue
E 10/2012
Desk-top cases – b
b
Front panels and rear panels are screwed on front or rear frame
of case
Delivery comprises (kit)
Order Information
Note
Assembly kit to fix one rear and one front panel is included with
the case
Cable holder and rear feet, see from page 5.81
02004061
b
Delivery comprises (kit)
Order Information
Note
Cable holder and rear feet see from page 5.81
Front panel and rear panel
02005001
Rear panel/front panel
CPA30656
Item Qty Description
1 1 Rear panel with 4 rows of ventilation slots, AI, anodised,
cut edges plain; 28, 42, 63 HP = 2 mm thick;
84 HP = 2.5 mm thick
2 1 Front panel, Al, anodised, cut edges plain, 3 mm thick
Height Width Height
HHeight
hWidth Rear panel Front panel
Bb
U HP mm mm mm mm Part no. Part no.
242 84 66 238.7 226.3 30823-015 30823-209
2 84 84 66 452.1 439.7 30823-512 30823-215
328 128.4 100 167.5 155.1 30823-021 30823-254
3 42 128.4 100 238.7 226.3 30823-024 30823-257
363 128.4 100 345.4 333.1 30823-027 30823-224
3 84 128.4 100 452.1 439.7 30823-515 30823-260
442 172.9 144.5 238.7 226.3 30823-033 30823-269
4 63 172.9 144.5 345.4 333.1 30823-036 30823-227
484 172.9 144.5 452.1 439.7 30823-518 30823-272
6 63 261.8 233.4 345.4 333.1 30823-045 30823-230
684 261.8 233.4 452.1 439.7 30823-521 30823-284
Front panel/rear panel with hidden fixing
Item Qty Description
1 1 Front panel, Al, anodised, cut edges plain, 2.5 mm
2 4 Fixing bracket
Height Width Height
HHeight
hWidth Part no.
Bb
U HP mmmmmmmm
242 84.0 66.0 238.7 226.3 24575-035
2 84 84.0 66.0 452.1 439.7 24575-075
328 128.4 100.0 167.5 155.1 24575-115
3 42 128.4 100.0 238.7 226.3 24575-135
363 128.4 100.0 345.4 333.1 24575-155
3 84 128.4 100.0 452.1 439.7 24575-175
442 172.9 144.5 238.7 226.3 24575-235
4 63 172.9 144.5 345.4 333.1 24575-255
484 172.9 144.5 452.1 439.7 24575-275
6 63 261.8 233.4 345.4 333.1 24575-455
684 261.8 233.4 452.1 439.7 24575-475
5_3_compacPRO_e.fm Seite 82 Montag, 17. September 2012 9:12 21
5.83
Desk-top cases – b
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
02005004
02004063
b
Delivery comprises
Order Information
02005005
02908054
b
Delivery comprises
Order Information
Rear foot with rubber insert
A
23 8.5
16.5
ø 4.2
Item Qty Description
1 2 Foot with rubber insert, PC, UL 94 V-0, RAL 7016
2 1 Fixing material
For case height A Part no.
Umm
3139 24575-114
4 183.5 24575-214
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
Edge protection/rear foot
Item Qty Description
1 2 Edge protection, PU foam, black
2 1 Assembly kit
For case height A B C Part no.
U mmmmmm
3159.1 114.0 100.0 20823-675
4 203.6 159.0 144.5 20823-676
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
20,2
C
B
A
A
A-A
A
2735
27,5
Ø
8
Ø
4,5
5
5_3_compacPRO_e.fm Seite 83 Montag, 15. Oktober 2012 3:56 15
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.84 Main Catalogue
E 10/2012
Desk-top cases – b
02004065
Dimensions for modifying the rear panel
02004066
b
Delivery comprises
Order Information
Rear panel, see page 5.82
02005006
02004064
Cable support
A4-512
b
Delivery comprises
Order Information
Note
Cable support can only be fitted in conjunction with rear foot for
hood
To fit the hood, the rear panel and the rear foot for hood must be
mounted on the case
Rear panel, see page 5.82
Rear foot for hood see page 5.84
Rear foot for hood
B
A
D
M6
M6
3045
B
27.55 8 x 6.1
Item Qty Description
1 2 Foot, PU foam, black, 75° shore
2 1 Fixing material
Height A B D Part no