USD

EHF-1xx-01-xx-D-xx-xx-xx Drawing

Samtec Inc.

View All Related Products | Download PDF Datasheet

Datasheet

DECIMALS ANGLES
.XX:
.01[0.3] 2
.XXX:
.005[0.13]
.XXXX:
.0020[0.051]
TOLERANCES ARE:
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
DO NOT
SCALE FROM
THIS PRINT
EHF-1XX-01-XX-D-XX-XX-XX
No OF POSITIONS
-03, -04,-05, -08, -10,
-13, -17, -20, -25
ROW SPECIFICATION
-D: DOUBLE
LEAD STYLE
-01
PLATING SPECIFICATION
OPTION
-LC: LOCKING CLIP (FOR -D-SM ONLY)
(SEE NOTE 7)
-P: PICK & PLACE PAD (FOR -D-SM ONLY)
(FOR -03 & -04, USE PPP-25, SEE FIG 7, SHT 3)
(FOR -05 THRU -25, USE PPP-48, SEE FIG 2)
-K: POLYIMIDE FILM
(USE K-500-300, SEE FIG 3)
-TR: TAPE & REEL PACKAGING
(FOR -D-SM, -D-SM-P, & -D-SM-K ONLY)
(NOT AVAILABLE ON -D-SM-LC)
TAIL OPTION
POLARIZED OPTION
-XX = PIN OMITTED
(N/A ON -RA OPTION)
(LEAVE BLANK FOR THROUGH HOLE,
SEE FIG 4, SHEET 2, USE T-1S63-01-XX)
-SM: SURFACE MOUNT (USE T-1S15-02-XX)
-RA: RIGHT ANGLE
(USE T-1S63-02-XX AND T-1S63-03-XX)
(SEE FIG 5, SHEET 2)
.570 [14.48] REF
(No OF POS x .050 [1.27]) +
.100 2.54
(TYP) REF
+ .200 [5.08] REF
(No OF POS x.050 [1.27])
.020 0.51
REF
.263 6.67
REF
.135 3.43
REF
(No OF POS - 1)
x .050 [1.27]
REF
.310 7.87
REF
.05 1.270
2
MAX SWAY
"A"
"A"
01
02
XX
90°
-
+
.296
±.010
7.52
±0.25
.335 8.51
C
.004[0.10]
.325 8.26
REF
.060 1.52
.120
REF
3.05
.016
REF
0.41
SECTION "A"-"A"
EHF-XX-D
LC-09-TM
EHF-110-01-XX-D-SM-LC
T-1S15-02-XX
ARM ASSEMBLY & ROTATION
EHA-02
.445 11.31
REF
.180 4.57
-SM IN-PROCESS 1
(SCALE: 1.5:1)
.084 2.13
.296
±.010
7.52
±0.25
90°
±3°
-SM IN-PROCESS 2
(SCALE: 1.5:1)
POS 1 INDICATOR
.200
REF
5.08
.020[0.51]
{(No OF POS X .050[1.27] + .370[9.40]) / 2}
C
L
(SCALE 1.5:1)
.293 7.44
REF
PPP-48
.295
REF
7.50
.020[0.51]
{(NO OF POS X .050[1.27] + .275[6.98]) / 2}
C
L
(SCALE: 1.5:1)
.260 6.60
REF
+ .290 [7.37] REF
(No OF POS x .050 [1.27])
.170
(TYP)
4.318
.083 2.111
C
FIG 1
-P: PICK AND PLACE PAD
FIG 2
FIG 3
-K: POLYIMIDE FILM
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL (USE T-1SXX-XX-L)
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL (USE T-1SXX-XX-F)
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL (USE T-1SXX-XX-S)
-H: 30µ" GOLD IN CONTACT AREA, 3µ" GOLD
ON TAIL (USE T-1SXX-XX-H)
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL (USE T-1SXX-XX-L)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL (USE T-1SXX-XX-S)
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL (USE T-1SXX-XX-F)
SHEET OF
MATERIAL:
.050 EJECTOR HEADER ASSEMBLY
BY:
EHF-1XX-01-XX-D-XX-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
ERIC M.
08/17/01
3
1
SHEET SCALE: 1.75:1
INSULATOR: VECTRA E130i, COLOR BLACK
50% REGRIND
TERMINAL: PHOS BRONZE 510 SPRING
F:\dwg\sw\exisprod\assembly\050\EHF-1XX-01-XX-D-XX-XX-XX-ASM.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY TO BE WITHIN .004[0.10].
3. MAXIMUM BURR ALLOWANCE: .0015 [0.038].
4. MINIMUM PUSHOUT FORCE: 1 LB.
5. MAXIMUM ALLOWABLE BOW: .002[0.05] INCH/INCH AFTER ASSEMBLY.
6. NOTE DELETED.
7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT
COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT
FOR ALL ASSEMBLIES WITH THE –LC OPTION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION AG
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
PT-1-24-01-51
(LOAD PARTS WITH POSITION #1 INDICATOR
IN SAME DIRECTION AS ARROW ON TUBE)
PACKAGING VIEWS
"B"
"B"
STANDARD THROUGH HOLE
(SHOWN: EHF-110-01-XX-D)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 4
.107 2.72
.350 8.89
REF
SECTION "B"-"B"
T-1S63-01-XX
C
PT-1-24-05-09
PT-1-24-01-52
"C"
"C"
-RA: RIGHT ANGLE OPTION
(SHOWN: EHF-110-01-XX-D-RA)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 5
.480 12.19
.120 3.05
T-1S63-03-XX
-RA IN-PROCESS 1
.120 3.05
.580 14.73
.09
REF
2.3
.050 1.27
90°
±3°
T-1S63-02-XX
-RA IN-PROCESS 2
2
MAX SWAY
(TYP)
02
01
.120
REF
3.05
.050 1.27
.050 1.27
.090
REF
2.29
90°
±3°
SECTION "C"-"C"
T-1S63-03-XX
T-1S63-02-XX
C
EJECTOR ARM MUST BE IN UPPRIGHT
POSITION WHEN LOADED INTO TUBES
.210 5.34
.180 4.57
PT-1-24-16-29
NOTE: ARROW POINTS INTO THE SHEET AWAY FROM YOU.
SHEET OF
.050 EJECTOR HEADER ASSEMBLY
BY:
EHF-1XX-01-XX-D-XX-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
ERIC M.
08/17/01
3
2
SHEET SCALE: 2:1
REVISION AG
F:\dwg\sw\exisprod\assembly\050\EHF-1XX-01-XX-D-XX-XX-XX-ASM.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
R
.028 0.70
REF (TYP)
.400 10.16
REF (TYP)
.097 2.47
REF (TYP)
FIG 6
-SM: SURFACE MOUNT OPTION
(SHOWN: EHF-110-01-XX-D-SM-LC)
(SHOWN WITH LATCHES OPEN)
.200 5.08
REF
FIG 7
-03 & -04 PICK AND PLACE PAD
(SHOWN: EHF-104-01-XX-D-SM-XX-P)
PPP-25
.283 7.19
REF
LATCHES OMITTED FOR CLARITY
.526 13.36
REF
FIG 8
APPLICATION VIEW
EHF MATED WITH FFSD AND ECF
.343 8.70
REF
+.715 [18.16] REF
(NO. OF POSITIONS x .050 [1.27])
FIG 9
-TR: TAPE & REEL
ROUND HOLES
OBLONG HOLES
POS 01 INDICATOR
SHEET OF
.050 EJECTOR HEADER ASSEMBLY
BY:
EHF-1XX-01-XX-D-XX-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
ERIC M.
08/17/01
3
3
SHEET SCALE: 2:1
REVISION AG
F:\dwg\sw\exisprod\assembly\050\EHF-1XX-01-XX-D-XX-XX-XX-ASM.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322

Products

CONN HEADER VERT 10POS 1.27MM
Available Quantity612
Unit Price3.33
CONN HEADER SMD 10POS 1.27MM
Available Quantity600
Unit Price4.13
CONN HEADER VERT 10POS 1.27MM
Available Quantity2250
Unit Price3.83
CONN HEADER VERT 16POS 1.27MM
Available Quantity1284
Unit Price4.25
CONN HEADER SMD 10POS 1.27MM
Available Quantity1645
Unit Price4.45
CONN HEADER VERT 20POS 1.27MM
Available Quantity2962
Unit Price4.5
CONN HEADER SMD 10POS 1.27MM
Available Quantity1020
Unit Price4.6
CONN HEADER SMD 16POS 1.27MM
Available Quantity715
Unit Price5.58
CONN HEADER VERT 26POS 1.27MM
Available Quantity3039
Unit Price5.63
CONN HEADER R/A 20POS 1.27MM
Available Quantity546
Unit Price5.83
CONN HEADER VERT 40POS 1.27MM
Available Quantity691
Unit Price6.38
CONN HEADER SMD 26POS 1.27MM
Available Quantity946
Unit Price6.91
CONN HEADER SMD 34POS 1.27MM
Available Quantity534
Unit Price6.96
CONN HEADER SMD 34POS 1.27MM
Available Quantity1313
Unit Price7.49
CONN HEADER SMD 40POS 1.27MM
Available Quantity769
Unit Price7.66
CONN HEADER SMD 50POS 1.27MM
Available Quantity1050
Unit Price8.65
CONN HEADER VERT 50POS 1.27MM
Available Quantity3658
Unit Price7.97
CONN HEADER SMD 40POS 1.27MM
Available Quantity541
Unit Price8.09
CONN HEADER SMD 50POS 1.27MM
Available Quantity517
Unit Price8.4
CONN HEADER SMD 50POS 1.27MM
Available Quantity1936
Unit Price9.15