Coaxial Cable Connectors Datasheet

Murata Electronics North America

View All Related Products | Download PDF Datasheet

Datasheet

Microwave Coaxial Connectors
O30E.pdf
Nov.1,2018
EU RoHS Compliant
All the products in this catalog comply
with EU RoHS.
EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Contents
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
Product specifications are as of June 2018.
Part Numbering p2
Type of Connectors p4
Notice (Design) p30
Notice (Engagement/Disengagement) p31
Type of Probes p32
Electrical Performance Measurement System
(Insertion Loss, VSWR) p33
Mechanical Performance Measurement System
(Engagement/Disengagement Force) p34
Notice p35
Microwave Coaxial Connectors with Switch
SWD Type p6
SWF Type p8
SWG Type p10
SWH Type p12
SWH-2Way Type p14
SWJ Type p16
Microwave Coaxial Connectors
JSC Type p18
KSC Type p20
LSC Type p22
Microwave Coaxial Board to Board Connectors
JSC Type p24
KSC Type p26
LSC Type p28
1
2
3
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
2
3
o Part Numbering
(Part Number)
Microwave Coaxial Connectors/Multi Connectors
3Individual Specification Code (1)
Code
Switch Connector SMD Type
Connector SMD Type
Individual Specification Code (1)
-26
-27
1Product ID
MM
Microwave Coaxial Connectors/Multi Connectors
(Chip Type Receptacle)
Code
2Series
5829
5831
6829
6831
7829
7831
8430
8130
8030
8930
8830
JSC-Male Type
JSC-Female Type
KSC-Male Type
KSC-Female Type
LSC-Male Type
LSC-Female Type
SWD Type
SWF Type
SWG Type
SWH Type
SWJ Type
Code Series
5Package Product ID
B
R
Bulk
Reel
Code Package Product ID
A1
A2
B3
B8
J3
J4
J5
K0
K15
K20
SWD Type, 1000pcs./Reel (ø180mm)
SWF Type, 2000pcs./Reel (ø180mm)
SWD Type, 3000pcs./Reel (ø330mm)
SWF Type, 8000pcs./Reel (ø330mm)
SWG Type, 3000pcs./Reel (ø180mm)
SWH, SWJ, JSC-Male, JSC-Female Type,
4000pcs./Reel (ø180mm)
KSC-Male, KSC-Female, LSC-Male,
LSC-Female, 5000pcs./Reel (ø180mm)
SWG, SWH, JSC-Male, JSC-Male Type,
10000pcs./Reel (ø330mm)
SWJ, JSC-Female Type,
15000pcs./Reel (ø330mm)
KSC-Male, KSC-Female, LSC-Male,
LSC-Female, 20000pcs/Reel (ø330mm)
Code Package Detail
4Individual Specification Code (2)
Code
Serial
Individual Specification Code (2)
00
6Package Detail
5
R
6
K0
1
MM
4
00
3
-26
2
8930
*You cannot order with Bulk for MP items.
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
(Part Number)
Microwave Coaxial Connectors with Cable
3Cable
Code
0.4D, PFA, Single Shield Line, Spiral
0.2D, PFA, Single Shield Line, Spiral
0.3D, PFA, Single Shield Line, Spiral
Cable
01
B3
56
1Product ID
MX
Microwave Coaxial Connectors with Cable
Code
2Connector (1)
JA
JG
JF
KG
KF
LA
LF
JSC Type for 01 Cable
JSC Type for B3 Cable
JSC Type for 56 Cable
KSC Type for B3 Cable
KSC Type for 56 Cable
LSC Type for B3 Cable
LSC Type for 56 Cable
Code Connector (1)
5Length
** Expressed by two sign
Code Individual Specification Code
4Connector (2)
Code
JSC Type for 01 Cable
JSC Type for B3 Cable
JSC Type for 56 Cable
KSC Type for B3 Cable
KSC Type for 56 Cable
LSC Type for B3 Cable
LSC Type for 56 Cable
None Connector
Connector (2)
JA
JG
JF
KG
KF
LA
LF
XX
6Individual Specification Code
5
**
6
**
1
MX
4
**
3
01
2
JA
Expressed by four figures. The unit is mm. From first to third
figures are significant, and the fourth figure expresses the number
of zeros which follow the three figures.
5000
1001
500mm=500x100
1000mm=100x101
Code Length
Ex.)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
Murata offers a variety of connectors:
Switch connector to measure RF circuit.
Microwave coaxial cable connector to transmit high frequency signals between circuits with low loss.
Board to Board connector to transmit high frequency signals from board to board with low loss.
Microwave Coaxial Connectors with Switch
The RF circuit and ANT characteristics can be measured by
mounting in an RF transmission line.
The internally built-in mechanical switch separates the RF
circuit and ANT circuit, so that the circuit can be measured
without any mutual effect using a dedicated probe made
by Murata. Except when measuring with probe, internal
mechanical switch is connected, so RF circuit and Antenna
circuit are connected.
Microwave Coaxial Connectors with Switch (bi-direction)
RF circuit and Antenna circuit can be measured by using
special probe without remounting switch connector.
RF
circuit
ANT
Probe
Signal in
Signal in
Signal out
Signal out
Probe
RF
circuit
ANT
Probe
Signal in
RF RF ANT.
ANT.RF
ANT.
Signal in
Signal out
Signal out
Probe
Probe
Signal out Signal in
Signal out
Probe
Signal in
Type of Connectors
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4Continued on the following page.
Microwave Coaxial Connectors with Cable
This connector transmits high frequency signals between
circuits, and its transmission loss is lower than electrode
pattern.
SMD type coaxial Connector and coaxial cable connector
are used in a kit.
Microwave Coaxial Board to Board Connectors
Board to Board connector to transmit high frequency signals
from board to board, such as antenna and main board.
MAIN
ANT
DIVERSITY
ANT
RF
circuit
RF
circuit
DIVERSITY
ANT
MAIN
ANT
Type of Connectors
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5
Continued from the preceding page.
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWD Type
Features
1. The microwave coaxial connector with switch is very
useful for electrical characteristics measurement of
microwave circuits for PC, tablet, and cellular phone.
2. Size 3x3x1.75mm (LxWxH), Occupation area 9mm2
3. Excellent characteristics, IL 0.2dB max. (@6GHz), VSWR
1.3 max. (DC to 6GHz)
4. Connector durability is 500 cycles with probe.
Applications
PC, Tablet, Cellular phone, and Other wireless equipment
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Measurement system: Refer to Electrical performance
measurement system (p. 33)
Specification (Insertion Loss & VSWR)
Standard Pattern Dimension, Stencil Mask Pattern
3±0.1
dia 2.1
1.75±0.15
0.8
3±0.1
IN
OUT
GROUND
(in mm)
2±0.1
0.5±0.1
1±0.1
0.4±0.1
1±0.1
0.4±0.1
Inner terminal (C)
Inner terminal (R)
Signal in
0.1
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency
Range (GHz)
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
MM8430-2610
50 300 500 500 to 6 1.2 (DC to 3GHz)
1.3 (3GHz to 6GHz)
0.1 (DC to 3GHz)
0.2 (3GHz to 6GHz)
20 (DC to 3GHz)
15 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
2.00
0.50
1.00
4.00
1.00
1.00
3.00
(1.50)
2.10
3.10
4.10
1.74
(1.50)
(in mm)
Through hole
Land (Gold Plating)
Electrode
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
1
Continued on the following page.
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM8430-2610RA1: 180 mm dia. reel/1000 pcs.
MM8430-2610RB3: 330 mm dia. reel/3000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
0.53
1.00
2.00
3.50
2.00
3.60
3.00
(Thickness: 0.1mm)
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM8430-2610RA1
MM8430-2610RB3
180+0/-3
330±2.0
13±0.5
13±0.5
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+2/-0
Dia. (110)
13+2/-0
13.4±2
17±2
17.4±2
(in mm)
B W D0 E F K
3.4±0.1
A
3.4±0.1 12±0.2 Dia. 1.5±0.1 1.75±0.1 5.5±0.1 2.0±0.15
P1 P2 T
8±0.1
P0
4±0.1 2±0.1 0.3±0.05
P0
W
F
P1 A K
3° max.3° max.
B
E
D0 TP2
Standard Stencil Mask Pattern
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
7
1
Continued from the preceding page.
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWF Type
Features
1. The microwave coaxial connector with switch is very
useful for electrical characteristics measurement of
microwave circuit for PC, tablet and cellular phone.
2. Size 2.5x2.5x1.4mm (LxWxH), Occupation area 6.25mm2
3. Excellent characteristics, low IL 0.2dB max. (@6GHz)
V.S.W.R. 1.3 max. (DC to 6GHz)
4. Connector durability is 100 cycles with probe.
Applications
PC, Tablet, Cellular phone and other wireless equipment
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Specification (Insertion Loss & VSWR)
Standard Pattern Dimension, Stencil Mask Pattern
2.5
Dia. 2.1
1.4±0.1
0.8
2.5
(in mm)
Dia. 0.6
Signal in
0.1
0.6±0.1 1.3±0.1
0.45±0.1
0.45±0.1
1.5±0.1
0.35±0.1
0.18±0.1
Inner terminal (R)
Inner terminal (C)
IN
OUT
GROUND
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency
Range (GHz)
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
MM8130-2600
70 300 500 100 to 6 1.2 (DC to 3GHz)
1.3 (3GHz to 6GHz)
0.1 (DC to 3GHz)
0.2 (3GHz to 6GHz)
20 (DC to 3GHz)
15 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
1.741.50 1.50
0.50
1.30
2.80
4.00
1.74
2.90
4.14
2.70
1.10
3.44
(in mm)
Land (Gold Plating)
Electrode
Standard Pattern Dimensions
Measurement system: Refer to Electrical performance
measurement system (p. 33)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
8
1
Continued on the following page.
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM8130-2600RA2: 180 mm dia. reel/2000 pcs.
MM8130-2600RB8: 330 mm dia. reel/8000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
(Thickness: 0.12mm)
1.10
2.70
0.28
2.14
2.70
1.30
2.48
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM8130-2600RA2
MM8130-2600RB8
180+0/-3
330±2.0
13±0.5
13±0.5
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
2.8±0.1
A
2.8±0.1 8±0.2 Dia. 1.5±0.1
1.75±0.1 3.5±0.1 1.6±0.1
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.25±0.05
A1
0.15±0.1
B1
0.85±0.1
P0
W
F
P1 A K
B
E
D0 T
P2
A1
B1
5° max.5° max.
Standard Stencil Mask Pattern
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
9
1
Continued from the preceding page.
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWG Type
Features
1. The microwave coaxial connector with switch is very
useful for electrical characteristics measurement of
microwave circuit for PC, tablet and cellular phone.
2. Nominal Frequency Range is DC to 11GHz.
3. Size 2x2x0.9mm (LxWxH), Occupation area 4mm2
4. Excellent characteristics, low IL 0.2dB max. (@6GHz) and
0.5dB max. (@11GHz) V.S.W.R. 1.3 max. (DC to 6GHz) and
1.5 max. (6GHz to 11GHz)
5. Connector durability is 100 cycles with probe.
Applications
PC, Tablet, Cellular phone and other wireless equipment
Specification (Insertion Loss & VSWR)
0.08
(in mm)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
IN
OUT
GROUND
1.9
1
1
0.38
0.25
1.9
0.18
0.15
Innerterminal (C) Inner terminal (R)
+0.2
-
0.1 +0.2
-
0.1
2.1
2
0.45
0.9
±
0.1
Signal in
Dia. 0.5
Dia. 1.35
2
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency
Range (GHz)
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
MM8030-2610
70 300 500 100 to 11
1.2 (DC to 3GHz)
1.3 (3GHz to 6GHz)
1.5 (6GHz to 11GHz)
0.1 (DC to 3GHz)
0.2 (3GHz to 6GHz)
0.5 (6GHz to 11GHz)
20 (DC to 3GHz)
15 (3GHz to 6GHz)
10 (6GHz to 11GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
01234567891011
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
Measurement system: Refer to Electrical performance
measurement system (p. 33)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10
1
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM8030-2610RJ3: 180 mm dia. reel/3000 pcs.
MM8030-2610RK0: 330 mm dia. reel/10000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
1.10
1.36 1.36
2.20
0.36
0.84
(Thickness: 0.08mm)
1.10
1.58
2.30
2.20
1.34
0.31
2.30
1.68
1.00
(Thickness: 0.12mm)
0.33
(Thickness: 0.10mm)
0.82
2.20
1.18
1.00
1.64
2.30
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM8030-2610RJ3
MM8030-2610RK0
180+0/-3
330±2.0
13±0.5
13±0.5
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
2.28±0.1
A
2.28±0.1 8±0.2 Dia. 1.5±0.1
1.75±0.1 3.5±0.1 1.1±0.1
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.25±0.05
A1
0.15±0.1
B1
0.85±0.1
P0
W
F
P1 A K
B
E
D0 T
P2
A1
B1
5° max.5° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
(in mm)
2.30
1.36
0.90
0.50
1.50
2.30
0.64
1.10
2.30
2.30
1.10
0.64
1.36
1.00
0.90
0.50
Land (Electrode + Gold Plating)
Resist Area
Electrode
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
11
1
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWH Type
Features
1. The microwave coaxial connector with switch is very
useful for electrical characteristics measurement of
microwave circuit for cellular phone and small wireless
equipment such as wearable equipment.
2. Size 1.6x1.6x0.7mm (LxWxH), Occupation area 2.56mm2
3. Excellent characteristics, low IL 0.2dB max. (@6GHz)
V.S.W.R. 1.3 max. (DC to 6GHz)
4. Connector durability is 50 cycles with probe.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Specification (Insertion Loss & VSWR)
(in mm)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
IN
OUT
GROUND
0.11
1.6
1.7
1.6
Dia.0.46
Dia.1.1
0.7
0.3
0.55
0.2
0.8
Inner terminal (C)
0.38
0.18
Inner terminal (R)
Signal in
0.12
0.08
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency
Range (GHz)
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
MM8930-2600
70 200 500 50 to 6 1.2 (DC to 3GHz)
1.3 (3GHz to 6GHz)
0.1 (DC to 3GHz)
0.2 (3GHz to 6GHz)
20 (DC to 3GHz)
15 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
Measurement system: Refer to electrical performance
measurement system (p. 33)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
12
1
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM8930-2600RJ4: 180 mm dia. reel/4000 pcs.
MM8930-2600RK0: 330 mm dia. reel/10000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
0.25
1.60
1.10
1.80
1.70
1.30
0.45
0.23
1.60
1.10
1.80
1.55
0.55
1.36
The standard solder cream stencil mask drawing
(Thickness: 0.08mm) (Thickness: 0.10mm)
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM8930-2600RJ4
MM8930-2600RK0
180+0/-3
330±2.0
13±0.5
13±0.5
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
1.73±0.1
A
1.73±0.1 8±0.2 Dia. 1.5±0.1
1.75±0.1 3.5±0.1 0.8±0.1
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.25±0.05
A1
0.14±0.1
B1
0.8±0.2
P0
W
F
P1 A K
B
E
D0 T
P2
A1
B1
5° max.5° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
(in mm)
1.30
1.80
0.45
1.70
0.45
0.70
0.80
3.20
0.35
4.20
1.101.03
Ground
0.30
Inner Terminal (C)
Inner Terminal (R)
1.70
1.70
Non-resist area
0.45
Land (Gold Plating)
Non-resist Area
Electrode
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
13
1
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWH-2Way Type
Features
1. The microwave 2way (bi-directional) coaxial connector
with switch is very useful for electrical characteristics
measurement of microwave circuit for cellular phone and
small wireless equipment such as wearable equipment.
2. It is possible to measure ANT circuit and RF circuit with
designated probe.
3. Size 1.6x1.6x0.7mm (LxWxH), Occupation area 2.56mm2
4. Excellent characteristics, low IL 0.2dB max. (@6GHz)
V.S.W.R. 1.3 max. (DC to 6GHz)
5. Connector durability is 50 cycles with probe.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Specification (Insertion Loss & VSWR)
Dia. 0.8
1.6
1.7
1.6
0.55
0.38
0.18
0.8
Dia. 1.2
0.3
0.7
0.12 0.12
Inner terminal (C) Inner terminal (R)
0.2
0.08
(in mm)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
IN
OUT
GROUND
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency
Range (GHz)
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
MM8930-2620
70 200 500 50 to 6 1.2 (DC to 3GHz)
1.3 (3GHz to 6GHz)
0.1 (DC to3GHz)
0.2 (3GHz to 6GHz)
RF: 20 (DC to 3GHz)
RF: 15 (3GHz to 6GHz)
ANT: 18 (DC to 3GHz)
ANT: 13 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
Measurement system: Refer to electrical performance
measurement system (p. 33)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
14
1
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM8930-2620RJ4: 180 mm dia. reel/4000 pcs.
MM8930-2620RK15: 330 mm dia. reel/15000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
0.25
1.60
1.10
1.80
1.70
1.30
0.45
0.23
1.60
1.10
1.80
1.55
0.55
1.36
The standard solder cream stencil mask drawing
(Thickness: 0.08mm) (Thickness: 0.10mm)
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM8930-2620RJ4
MM8930-2620RK15
180+0/-3
330±2.0
13±0.5
13±0.5
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
1.73±0.1
A
1.73±0.1 8±0.2 Dia. 1.5±0.1
1.75±0.1 3.5±0.1 0.8±0.1
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.25±0.05
A1
0.14±0.1
B1
0.8±0.2
P0
W
F
P1 A K
B
E
D0 T
P2
A1
B1
5° max.5° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
(in mm)
1.30
1.80
0.45
1.70
0.45
0.70
0.80
3.20
0.35
4.20
1.101.03
Ground
0.30
C Terminal (RF)
R Terminal (Ant)
1.70
0.45
1.70
Non-resist area
Land (Gold Plating)
Non-resist Area
Electrode
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
15
1
Microwave Coaxial Connectors with Switch
Microwave Coaxial Connectors with Switch SWJ Type
Features
1. The worlds smallest level microwave coaxial connector
with switch is very useful for electrical characteristics
measurement of microwave circuit for cellular phone and
small wireless equipment such as wearable equipment.
2. Size 1.4x1.2x0.65mm (LxWxH), Occupation area 1.68mm2
3. Excellent characteristics, low IL 0.2dB max. (@6GHz)
V.S.W.R. 1.3 max. (DC to 6GHz)
4. Connector durability is 50 cycles with probe.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Specification (Insertion Loss & VSWR)
Standard Pattern Dimension, Stencil Mask Pattern
Signal in
1.4
1.4
1.2
Dia. 0.9
0.27
0.65±0.1
Inner terminal (C)
0.41
0.23
0.48 0.59
0.23
Inner terminal (R)
+0.2
-
0.05
0.1
+0.2
-
0.05
0.1
0.08
Dia. 0.4
(in mm)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
IN
OUT
GROUND
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency
Range (GHz)
VSWR
(dB max.)
Insertion Loss (On)
(dB max.)
Isolation (Off)
(dB min.)
MM8830-2600
70 200 500 50 to 6 1.2 (DC to 3GHz)
1.3 (3GHz to 6GHz)
0.1 (DC to 3GHz)
0.2 (3GHz to 6GHz)
20 (DC to 3GHz)
15 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
(in mm)
0.60
0.30
(1.26)
(0.175)
1.98
0.68
0.48
3.39
2.99
1.78
C 0.063
3.20
0.70
0.28
0.35
0.64
0.96
(0.75)
(1.50)
0.60
0.27
0.64
0.49
R 0.05
1.30
0.78
0.26
0.58 0.68
1.00
1.50
Inner Terminal (C)
Inner Terminal (R)
Land (Gold Plating)
Resist Area
Electrode
Standard Pattern Dimensions
Measurement system: Refer to electrical performance
measurement system (p. 33)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16
1
Continued on the following page.
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM8830-2600RJ4: 180 mm dia. reel/4000 pcs.
MM8830-2600RK15: 330 mm dia. reel/15000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
(Thickness: 0.08mm)
1.30
0.58
0.25
0.70
R 0.05
1.00
1.50
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM8830-2600RJ4
MM8830-2600RK15
180+0/-3
330±2.0
13±0.5
13±0.5
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
1.3±0.1
A
1.5±0.1 8±0.2 Dia. 1.5±0.1
1.75±0.1 3.5±0.1 0.75±0.1
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.25±0.05
A1
0.14±0.1
B1
0.29±0.1
P0
W
F
P1 A K
B
E
D0 T
P2
A1
B1
5° max.5° max.
Standard Stencil Mask Pattern
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
17
1
Continued from the preceding page.
Microwave Coaxial Connectors
Microwave Coaxial Connectors JSC Type
Features
1. The microwave coaxial connector with cables is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipment such as wearable equipment.
2. Nominal Frequency Range is DC to 12GHz. (01 type cable.)
3. Receptacle size 2x1.8 (LxW), Occupation area 3.6mm2
4. Mating height is 1.0mm max., which is the worlds lowest
profile level with cable and receptacle.
5. V.S.W.R. 1.4 max. (DC to 6GHz), 1.6 max. (6GHz to 12GHz)
6. This has good lock feeling when cable and receptacle are
mated.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Specification (Insertion Loss & VSWR)
2
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
1.8
1.16
0.7
0.4
0.4
1
Dia. 1.3
1.7
0.5
(in mm)
Outer Terminal
Inner Terminal
0.08
I/O terminal
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0246810121357911
10
7
5
3
1
8
9
6
4
2
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
MM5829-2700 35 200 500 30 to 12
1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
1.5 (6GHz to 9GHz)
1.6 (9GHz to 12GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Measurement system: Refer to electrical performance
measurement system (p. 33)
Cable part number of specification: MXJA01JA1000
Cable type of specification: 01
Cable length of specification: 100mm
Measurement condition: Cable + Receptacle
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
18
2
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM5829-2700RJ4: 180 mm dia. reel/4000 pcs.
MM5829-2700RK0: 330 mm dia. reel/10000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
(Thickness: 0.10mm)
2.20
1.40
0.30
1.40
1.50
2.20
0.30
I/O Terminal
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM5829-2700RJ4
MM5829-2700RK0
180+0/-3
330±2.0
13±0.2
13±0.2
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
2.0±0.1
A
2.1±0.1 8±0.2 Dia. 1.5+0.1/-0
1.75±0.1 3.5±0.1 0.7±0.1
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.2±0.05
A1
0.9±0.1
B1
0.3±0.1
P0
W
F
P1
A1
AK
B
E
D0 T
P2
B1
3° max.3° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
2.20
1.40
1.00
0.40
1.00
0.30
1.70
1.40
2.40
(1.35)
0.40
(1.50)
1.74
(1.50)
(1.86)
(3.18)
1.00
I/O Terminal
0.40
1.70
1.30
2.40
0.90
2.20
0.50
2.85Min.
I/O Terminal
(in mm)
Land (Gold Plating)
Resist Area
Electrode
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
19
2
Microwave Coaxial Connectors
Microwave Coaxial Connectors KSC Type
Features
1. This worlds smallest level microwave coaxial connector
with cables is thin and suitable for internal wiring of
cellular phone and small wireless equipment such as
wearable equipment.
2. Receptacle size 1.3x1.2 (LxW), Occupation area 1.56mm2
3. Mating height is 0.8mm max., which is world lowest
profile level, with cable and receptacle.
4. V.S.W.R. 1.4 max. (DC to 6GHz)
5. This has good lock feeling when cable and receptacle are
mated.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Specification (Insertion Loss & VSWR)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Outer Terminal
Inner Terminal
0.84
1.2
1.2
1.3
Dia. 0.88
0.38
0.2
0.7
0.15min
1*
*1 : This electrode might be
covered with resin.
0.08
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
10
7
5
3
1
8
9
6
4
2
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
MM6829-2700 35 200 500 30 to 6 1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Measurement system: Refer to electrical performance
measurement system (p. 33)
Cable part number of specification: MXKGB3KG1000
Cable type of specification: B3
Cable length of specification: 100mm
Measurement condition: Cable + Receptacle
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
20
2
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM6829-2700RJ5: 180 mm dia. reel/5000 pcs.
MM6829-2700RK20: 330 mm dia. reel/20000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
(Thickness: 0.08mm)
0.25
0.4
0.7
1.3
0.75
0.55
0.74
0.99
1.3
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM6829-2700RJ5
MM6829-2700RK20
180+0/-3
330±2.0
13±0.2
13±0.2
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
1.35±0.1
A
1.35±0.1 8±0.2 Dia. 1.5+0.1/-0
1.75±0.1 3.5±0.1 0.5±0.05
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.2±0.1
A1
0.29±0.1
B1
0.2±0.1
P0
W
F
P1
A1
AK
B
E
D0 T
P2
B1
3° max.3° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
1.251.25
0.7
0.3
0.7
0.3
1.3
0.7
1
1.3
0.5
0.75
0.75
1.3
0.5
1.3
0.3
(in mm)
0.4
Land (Gold Plating)
Resist Area
Electrode
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
21
2
Microwave Coaxial Connectors
Microwave Coaxial Connectors LSC Type
Features
1. The microwave coaxial connector with cables is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipment such as wearable equipment.
2. Receptacle size 1.7x1.6 (LxW), Occupation area 2.72mm2
3. Mating height is 0.8mm max., which is world lowest
profile level, with cable and receptacle.
4. Diameter of receptacle cylinder is equal size with
JSC type connector. It makes easy to mate cable and
connector.
5. V.S.W.R. 1.4 max. (DC to 6GHz)
6. This has good lock feeling when cable and receptacle are
mated.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Specification (Insertion Loss & VSWR)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Outer Terminal
Inner Terminal
*1 : This electrode might be
covered with resin.
Dia.1.3
1.6
0.9
0.39 1.6
1.7
0.2
0.7
I/O terminal
1*
0.08
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
10
7
5
3
1
8
9
6
4
2
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
MM7829-2700 35 200 500 30 to 6 1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Measurement system: Refer to electrical performance
measurement system (p. 33)
Cable part number of specification: MXLF56LF1000
Cable type of specification: 56
Cable length of specification: 100mm
Measurement condition: Cable + Receptacle
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
22
2
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM7829-2700RJ5: 180 mm dia. reel/5000 pcs.
MM7829-2700RK20: 330 mm dia. reel/20000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
(Thickness: 0.08mm)
1.70
1.24
1.00
0.70
1.10
1.70
0.95
0.75
0.25
I/O Terminal
(in mm)
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM7829-2700RJ5
MM7829-2700RK20
180+0/-3
330±2.0
13±0.2
13±0.2
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
1.75±0.1
A
1.75±0.1 8±0.2 Dia. 1.5+0.1/-0
1.75±0.1 3.5±0.05 0.5±0.05
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.2±0.05
A1
0.29±0.1
B1
0.2±0.05
P0
W
F
P1
A1
AK
B
E
D0 T
P2
B1
3° max.3° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
0.30
1.70
0.70
1.70
0.95
0.40
I/O Terminal
1.25
0.70
0.30
1.70
1.40 0.70
1.25
0.40
1.70
1.20
2.10
0.70
0.95
1.15
I/O Terminal
(in mm)
Land (Gold Plating)
Resist Area
Electrode
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
23
2
Microwave Coaxial Board to Board Connectors
Microwave Coaxial Board to Board Connectors JSC Type
Features
1. The microwave coaxial Board to Board connector is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipmant such as wearable equipment.
2. Receptacle size 2x1.8 (LxW), Occupation area 3.6mm2.
Plug receptacle size 2x2.2 (LxW), Occupation area 4.4mm2
3. Mating height is 0.8mm max., which is worlds lowest
profile level, with plug receptacle and receptacle.
4. V.S.W.R. 1.5 max. (DC to 6GHz)
5. This has good lock feeling when plug receptacle and
receptacle are mated.
6. This connector mate with MM5829-2700.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Specification (Insertion Loss & VSWR)
(in mm)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
I/O Terminal
0.4
0.4
2.2
0.6
1.4
2.0
(Dia. 1.65)
0.1
Outer Terminal
Inner Terminal
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
MM5831-2700 35 200 500 30 to 6 1.3 (DC to 3GHz)
1.5 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Measurement system: Refer to electrical performance
measurement system (p. 33)
Measurement condition: SMD plug + Receptacle
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
24
3
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM5831-2700RJ4: 180 mm dia. reel/4000 pcs.
MM5831-2700RK15: 330 mm dia. reel/15000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
(Thickness: 0.1mm)
(in mm)
0.75
2.20
0.80
I/O Pattern
Ground Pattern
1.40
0.40
2.40
1.80
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM5831-2700RJ4
MM5831-2700RK15
180+0/-3
330±2.0
13±0.2
13±0.2
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
2.0±0.1
A
2.4±0.1 8±0.2 Dia. 1.5+0.1/-0
1.75±0.1 3.5±0.05 0.7±0.05
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.2±0.05
A1
0.6±0.1
B1
0.1±0.1
P0
W
F
P1
A1
AK
B
E
D0 T
P2
B1
3° max.3° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 1.0mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and Solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
0.10
0.40
1.50
1.76
1.50
1.60
1.80
1.86
0.85
0.80
0.70 0.65
0.30
2.40
1.10
1.10
I/O Pattern
0.40
0.50
1.50
2.20
0.750.65
0.50
1.60
2.40
I/O Pattern
(in mm)
Land (Gold Plating)
Resist Area
Electrode
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
25
3
Microwave Coaxial Board to Board Connectors
Microwave Coaxial Board to Board Connectors KSC Type
Features
1. The microwave coaxial Board to Board connector is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipment such as wearable equipment.
2. Receptacle size 1.3x1.2 (LxW), Occupation area 1.56mm2,
Plug receptacle size 1.4x1.2 (LxW), Occupation area
1.68mm2
3. Mating height is 0.6mm max., which is worlds lowest
profile level, with plug receptacle and receptacle.
4. V.S.W.R. 1.4 max. (DC to 6GHz)
5. This has good lock feeling when plug receptacle and
receptacle are mated.
6. This connector mates with MM6829-2700.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Specification (Insertion Loss & VSWR)
(in mm)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
0.4 I/O Terminal
0.3
1.4
0.3
1.2
0.08
Outer Terminal
Inner Terminal
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
0123456
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
This data is reference only.
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
MM6831-2700 35 200 500 30 to 6 1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Measurement system: Refer to electrical performance
measurement system (p. 33)
Measurement condition: SMD plug + Receptacle
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
26
3
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects. There is the
possibility to have the contact failure by flux shifting into
contact point, if the excess solder is used by non-standard
stencil mask pattern. Stencil mask pattern must be
followed to avoid soldering defects.
MM6831-2700RJ5: 180 mm dia. reel/5000 pcs.
MM6831-2700RK20: 330 mm dia. reel/20000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
(Thickness: 0.08mm)
(in mm)
1.3
1.08
0.74
0.3
0.53
0.94
0.54
0.4
0.55
1.5
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM6831-2700RJ5
MM6831-2700RK20
180+0/-3
330±2.0
13±0.2
13±0.2
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
1.55±0.1
A
1.35±0.1 8±0.2 Dia. 1.5+0.1/-0
1.75±0.1 3.5±0.1 0.5±0.05
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.2±0.1
A1
0.25±0.1
B1
0.2±0.1
P0
W
F
P1
A1
AK
B
E
D0 T
P2
B1
3° max.3° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
Land (Gold Plating)
Resist Area
Electrode
(in mm)
1.251.25
0.5 0.5
0.4
0.7
1.0
1.3
1.5
0.7
0.3
0.5
1.3
0.8
1.5
0.7
0.5
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
27
3
Microwave Coaxial Board to Board Connectors
Microwave Coaxial Board to Board Connectors LSC Type
Features
1. The microwave coaxial Board to Board connector is small,
thin and suitable for internal wiring of cellular phone and
small wireless equipment such as wearable equipment.
2. Receptacle size 1.7x1.6 (LxW), Occupation area 2.72mm2,
Plug receptacle size 1.9x1.7 (LxW), Occupation area
3.23mm2
3. Mating height is 0.6mm max., which is world lowest
profile level, with plug receptacle and receptacle.
4. V.S.W.R. 1.4 max. (DC to 6GHz)
5. This has good lock feeling when plug receptacle and
receptacle are mated.
6. This connector mate with MM7829-2700.
Applications
Cellular phone, Wearable equipment and other wireless
equipment
Specification (Insertion Loss & VSWR)
(in mm)
Scale: Free
Tolerances Unless
Otherwise Specified: ±0.2
0.3
0.07+/-0.1
1.8
1.9
0.3
1.7
(Dia. 1.64)
0.42
Outer Terminal
Inner Terminal
0.08
1
VSWR
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Frequency (GHz)
This data is reference only.
0123456
2
1.4
1
0.6
0.2
1.6
1.8
1.2
0.8
0.4
Insertion Loss (dB)
0
IL
VSWR (Gating function)
Part Number
Center Contact
Resistance
(mΩ max.)
Withstanding
Voltage
(Vrms)
Insulation
Resistance
(MΩ)
Durability
(Cycle)
Nominal
Frequency Range
(GHz)
VSWR
(dB max.)
MM7831-2700 35 200 500 30 to 6 1.3 (DC to 3GHz)
1.4 (3GHz to 6GHz)
Nominal Impedance: 50Ω
Rated Voltage: 30Vrms
Temperature Rating: -40 to 85°C
Measurement system: Refer to electrical performance
measurement system (p. 33)
Measurement condition: SMD plug + Receptacle
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
28
3
There is the possibility to have the contact failure by flux
shifting into contact point, if the excess solder is used by
non-standard stencil mask pattern. Stencil mask pattern
must be followed to avoid soldering defects.
MM7831-2700RJ5: 180 mm dia. reel/5000 pcs.
MM7831-2700RK20: 330 mm dia. reel/20000 pcs.
Dimensions of Reel Dimensions of Taping
Minimum Quantity
The standard solder cream stencil mask drawing
(Thickness: 0.08mm)
(in mm)
1.8
1.4
1.05 0.4
0.4
1.9
1.44
0.94
1.6
2
N
A
W2
W1
DB
C
(in mm)
Part Number A B C D N W1 W2
MM7831-2700RJ5
MM7831-2700RK20
180+0/-3
330±2.0
13±0.5
13±0.5
21±0.8
21±0.8
2±0.5
2±0.5
Dia. 60+1/-0
Dia. 100±1.0
9±0.3
9.4±1.0
11.4±1.0
13.4±1.0
(in mm)
BWD0
EFK
1.95±0.1
A
1.85±0.1 8±0.2 Dia. 1.5+0.1/-0
1.75±0.1 3.5±0.1 0.5±0.05
P1 P2 T
4±0.1
P0
4±0.1 2±0.1 0.2±0.1
A1
0.25±0.1
B1
0.2±0.1
P0
W
F
P1
A1
AK
B
E
D0 T
P2
B1
3° max.3° max.
Standard Stencil Mask Pattern
I/O pattern should be designed to be the impedance
match 50 ohm.
The material of PWB is the epoxy resin of glass fabric
base. (εr=4.3@1GHz). Thickness is 0.4mm.
The solder resist should be printed except for the land
pattern on the PWB
Land pattern and solder resist pattern must be followed
to avoid soldering defects.
Standard Pattern Dimension, Stencil Mask Pattern
Land (Gold Plating)
Resist Area
Electrode
(in mm)
1.8
1.4
0.9
0.5
2.1
1.1
11
0.7
0.73
1.25
0.5
0.7
1.25
1.9
1.3
0.3
0.9
2
1.8
1.9
1
Standard Pattern Dimensions
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
29
3
Connector performance is influenced by GND among inner
layers of substrate.
We recommend makeing space more than 0.4mm between
connectors and GND.
And please avoid placeing signal lines and power lines under
connectors to prevent interference with signals which pass
connectors.
Connector performance is influenced by GND among inner
layers of substrate.
We recommend makeing space more than 0.4mm between
connectors and GND.
And please avoid placeing signal lines and power lines under
connectors to prevent interference with signals which pass
connectors.
Microwave Coaxial Connectors, Microwave Coaxial Board to Board Connectors
Microwave Coaxial Connectors with Switch
Part Number X Y
MM5829-2700
2.2 2.4
MM5831-2700
2.4 2.2
MM6829-2700
1.3 1.4
MM6831-2700
1.3 1.5
MM7829-2700
1.7 1.8
MM7831-2700
1.8 2.0
Part Number X Y
MM8430-2610
4.0 4.1
MM8130-2600
2.8 2.9
MM8030-2610
2.3 2.3
MM8930-2600
1.7 1.8
MM8930-2620
1.7 1.8
MM8830-2600
1.3 1.5
Notice (Design)
Z=50Ω
X
Y
Do not place GND, signal lines,
power lines, and so on.
More than 400um
GND
Z=50Ω
XY
Do not place GND, signal lines,
power lines, and so on.
More than 400um
GND
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
30
When you mate/unmate connectors and cables, please use
specialized engage/disengagement jig.
Please mate to connectors when centering them and
keeping parallel state.
Mating is completed when you feel the click.
Please confirm if mating height is in specification after
mating is completed.
Please do not stress more than 30N when mating
connectors.
Please mate to cable plugs and connectors when centering
them and keeping parallel state.
Mating is completed when you feel the click.
Please confirm if mating height is in specification after
mating is completed.
Please do not stress more than 30N when mating cable
plugs and connectors.
Microwave Coaxial Connectors with Cable
Microwave Coaxial Board to Board Connectors
Notice (Engagement/Disengagement)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
31
We have lineup of measurement probes that are designed
for Murata connecters.
Please use Murata probes for Murata connectors.
This is used for evaluation in lab. Measurement cable is
able to be attached with this probe. This probe stands itself
after mating is completed, because it has claw at contact
point with connectors. Any stress to probe via cable after
engagement may cause that probe come off, connectors get
damage, or electrode peel off.
This probe is used for inspection in mass production process.
Probes are built in measurement fixture, and pressed at
connectors. This probe will not damage connectors because
it doesn’t have locking function by claw. Measurement
fixture needs to have floating mechanism since the probe
doesn’t have floating mechanism itself.
Measurement cable is able to be attached with this probe.
This probe is used for inspection in mass production process.
It has same function as Auto probe with floating mechanism.
This probe is not affected by cable tension because of its
special construction. The probe makes conversion cable
easy to be handled.
This is used for evaluation in lab. Measurement cable is
assembled with probes. This probe stands itself after mating
is completed, because it has claw at contact point with
connectors. Any stress to probe via cable after engagement
may cause that probe come off, connectors get damage, or
electrode peel off.
This probe is used for inspection in mass production process.
Probes are built in measurement fixture, and pressed at
connectors. This probe will not damage connectors because
it doesn’t have locking function by claw. Measurement
fixture doesn’t need to have floating mechanism since the
probe has floating mechanism itself.
This adapter is used for calibrating probes. This has SMA
connector on one side and Murata connector shape on the
other side. It can connect cable from network analyzer and
tip of probe.
Manual probe without cable
Auto probe without floating mechanism
Auto probe (tension free type)
Manual probe with cable
Auto probe with floating mechanism
Calibration adapter
Type of Probes
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
32
1. Measurement method of cables
(1) Calibration
Use CAL KIT to do SOLT calibration of measurement instrument.
Use through PWB to do through calibration.
(2) Measurement
[1] Insertion Loss
[2] VSWR
Use Gating function of network analyzer to measure connector part.
2. Measurement method of board to board connectors
(1) Calibration
Use CAL KIT to do SOLT calibration of measurement instrument.
Use through PWB to do through calibration.
(2) Measurement
[1] Insertion Loss
[2] VSWR
Use Gating function of network analyzer to measure connector part.
Port1 Port2
Calibration
SMA SMA
Calibration
Through PWB
Port1 Port2
Calibration
SMA SMA
Calibration
Through PWB
Port1
SMA
Port2
SMA
Receptacle
Cable connector
EVB EVB
Receptacle
Port1
Port2
SMA
SMA
EVB
Port1 SMA
Receptacle Cable connector
EVB
5
5
Gating
Receptacle
Port1
Port2
SMA
SMA
EVB
5
5
Gating
Electrical Performance Measurement System (Insertion Loss, VSWR)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
33
1. Engagement/Disengagement force
[1] Engagement force
To measure require force for complete engagement
connectors and receptacles.
Measuring engagement maximum force by pushing
down of push-pull gauge with engagement/
disengagement tool on the tip.
[2] Disengagement force
To measure require force for complete disengagement
connectors and receptacles from mated state.
Measuring disengagement maximum force by pulling up
of push-pull gauge with engagement/disengagement
tool on the tip.
xx.xx
Push-pull gauge
Vertical motorized
test stand
Engagement/Disengagement tool
Connector (Cable connector or Board to Board connector)
+ Receptacle
Mechanical Performance Measurement System (Engagement/Disengagement Force)
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
34
Notice
Notice (Storage and Operating Condition)
1. Environment Conditions
(1) This product is designed for use in electrical
equipment in the environment (temperature, humidity,
atmospheric pressure, etc.) specified in this approval
drawing. It may not be used in the following
environments or under the following conditions:
(a) Ambient air containing corrosive gas (Cl2, H2S, NH3,
SOX, NOX etc.).
(b) Ambient air containing volatile or combustible gas.
(c) In liquid (water, oil, chemical solution, organic
solvents, etc.).
(d) In environments with a high concentration of
airborne particles.
(e) In direct sunlight.
(f) Dusty conditions.
(g) In freezing.
(h) Other environments similar to the above conditions.
(2) Contact the manufacturer before using the product in
any of the above environments or under any of the
above conditions.
Notice (Soldering and Mounting)
1. Reflow soldering
Soldering must be carried out without exceeding the
allowable soldering temperature and time shown within
the shaded area of Figure "Allowable Temperature and
Time of Reflow Soldering".
In case the soldering is repeated, the maximum time in
Figure "Allowable Temperature and Time of Reflow
Soldering" should be accumulated time. The standard
soldering conditions are shown in Figure "Reflow
Soldering Standard Conditions".
Follow standard pattern dimensions.
2. Please contact us before use if concerning other soldering
conditions.
3. In soldering, do not apply excessive mechanical force to
terminals or leads greater than specified in the drawing.
4. Please note the following in case of soldering terminals or
leads of the product.
(1) Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
(2) Flux should be cleaned thoroughly.
5. Please mount this product at the position so that stress
by wrap and/or bend of the PCB may not apply to it.
6. Please dry out this product immediately after soldering
and cleaning.
7. Please avoid the cleaning of this product for Microwave
Coaxial Connector with Switch.
2. Storage
Store in manufacturer's package or tightly re-closed box
with the following conditions. Use this product within 6
months after receipt. Check the terminal solderability
before use if the product has been stored for more than 6
months.
Temperature: -10 to +40 degree C
Humidity: 15 to 85% RH
Allowable Temperature and Time of Reflow Soldering
Reflow Soldering Standard Conditions
60 to 120 sec. T1
t2
Time (sec.)
Standard soldering condition
Resistance to soldering heat condition
tp0 (°C)
240+0/-5
260+5/-0
tp1 (°C)
220
240
T1 (sec.)
30 to 60
30max.
t2 (°C)
150 to 180
150 to 180
Peak temperature tp0
tp1
100
25
0
Temperature (°C)
Pre-heating
260
250
240
230
220
210
200
190
180
Time (sec.)
Temperature (°C)
Solder: Sn-3.0Ag-0.5Cu
30 60 90 120 150 180 210 240
Measuring point of temperature: In-Out Terminals of the Device
Reflow Soldering: Both Convection and Infrared Rays
: Hot Air
: Hot Plate
Notice
O30E.pdf
Nov.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
35
Murata Manufacturing Co., Ltd.
www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specifi ed by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1 Aircraft equipment
2 Aerospace equipment
3 Undersea equipment
4 Power plant equipment
5 Medical equipment
6 Transportation equipment (vehicles, trains,
ships, etc.)
7 Traffi c signal equipment
8 Disaster prevention / crime prevention
equipment
9 Data-processing equipment
10 Application of similar complexity and/or
reliability requirements to the applications
listed above
3 Product specifi cations in this catalog are as of
June 2018. They are subject to change or our
products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifi cations.
Therefore, please approve our product
specifi cations or transact the approval sheet
for product specifi cations before ordering.
6 Please note that unless otherwise specifi ed, we
shall assume no responsibility whatsoever for any
confl ict or dispute that may occur in connection
with the eff ect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the eff ect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Global Locations
For details please visit www.murata.com
Cat. No. O30E-9
O30E.pdf
Nov.1,2018

Products

CONN SWG RCPT STR 50 OHM SMD
Available Quantity73713
Unit Price0.2
CONN SWG RCPT STR 50 OHM SMD
Available Quantity44479
Unit Price0.2
CONN HSC RCPT STR 50 OHM SMD
Available Quantity57839
Unit Price0.28
CONN SWF RCPT STR 50 OHM SMD
Available Quantity29131
Unit Price0.37
CONN SWF RCPT STR 50 OHM SMD
Available Quantity75379
Unit Price0.37
CONN SWH RCPT STR 50 OHM SMD
Available Quantity11265
Unit Price0.38
CONN SWD RCPT STR 50 OHM SMD
Available Quantity21822
Unit Price0.54
CONN SWD RCPT STR 50 OHM SMD
Available Quantity35055
Unit Price0.54
CONN MEAS PROBE FOR SWD/SWF CONN
Available Quantity241
Unit Price37.25
CONN MEAS PROBE FOR SWG TYP RCPT
Available Quantity160
Unit Price65.17
CONN MEAS PROBE FOR SWD/SWF CONN
Available Quantity91
Unit Price89.56
CONN HSC RCPT STR 50 OHM SMD
Available Quantity11846
Unit Price0.26
CONN JSC RCPT STR 50 OHM SMD
Available Quantity14870
Unit Price0.3
CONN MEAS PROBE FOR SMA PLUG
Available Quantity38
Unit Price44.24
CONN JSC RCPT STR 50 OHM SMD
Available Quantity0
Unit Price0.28
RF CONNECTORS / COAXIAL CONNECTO
Available Quantity0
Unit Price0.13048
MICROWAVE COAXIAL CONNECTOR RECE
Available Quantity0
Unit Price0.14096
CBL ASSY JSC RCPT 7.874"
Available Quantity0
Unit Price3.6204
CBL ASSY JSC RCPT-RCPT 0.787"
Available Quantity0
Unit Price6.5326
COAXIAL CABLE
Available Quantity0
Unit Price58.3756