096510-0042 Datasheet

ITT Cannon, LLC

View All Related Products | Download PDF Datasheet

Datasheet

Cannon Microminiature
Connectors Customer
Support Locations
ASIA
Tuopandun Industrial Area, Jinda Cheng,
Xiner Village, Shajing Town,
Baoan District, Shenzhen City,
Guangdong, China 518125
Phone: (86) 755 2726 7238
Fax: (86) 755 2726 7515
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: 49.7151.699.0
fax: 49.7151.699.217
ITALY
Corso Europa 41/43
Lainate (MI),
Italy 20020
phone: 39.02938721
fax: 39.0293872300
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: 44.1256.311200
fax: 44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: 1.714.557.4700
fax: 1.714.628.2142
www.ittcannon.com ©2006 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of
ITT Corporation. Specification and other data are based on information available at the
time of printing, and are subject to change without notice.
CMC-08-06
Cannon
Microminiature
Connectors
Electronic Components
High Performance Micro Miniature
Connectors
ITT Cannon is a division of ITT Inc.
Developed first by Cannon in the 1960s,
Cannon's Micro Connector portfolio has
witnessed many product extensions
since then, and it remains the most
extensive in the industry, offering the
most reliable and cost effective range of
micro interconnect solutions. These
innovations have enabled ITT to provide
products and technologies to such
markets as:
• Aerospace
Computers Systems
Defense Electronics
• Geophysical
Industrial Automation
Medical Electronics
Network Systems
Telecom Switching
Underwater Systems
• Wireless
Offering the broadest selections of stan-
dard and custom micro interconnect
solutions, ITT is the one stop source for
design, development, manufacturing,
and test of sophisticated multi channel
high density connectors. Our product
portfolio consists of rectangular,circular,
quick disconnect, high speed signal, fil-
ter,hermetic, mixed signal packages,
and strip style interconnects. Each prod-
uct has unique mechanical engagement
and locking mechanisms to meet the
demands of harsh environment applica-
tions. These products include our Centi
Line .100-inch and .075-inch center
spacing, the Microline .050 inch center
spacing, and our Nano line of .025-inch
center contact spacing. All of ITT’smicro
connectors utilize our twist pin contact
system, developed by ITT in the early
1960’s. A separate section describes in
detail the twist pin electrical contact
technology (refer to page 6).
The Standard of Six Sigma
When you specify a
Cannon microminiature
connector, you can rely on
aproduct designed,
developed, and manufac-
tured to the highest quali-
ty and reliability standards
in the industry. This tradi-
tion of excellence is
based on ITT’s corporate
culture of operating its
entire business under the
principles
of Six Sigma. At ITT, Six
Sigma is not just a quality
philosophy but a com-
plete corporate culture
that drives the entire busi-
ness. Our Value Based
Management and Value Based Product
Development systems aretwo corner-
stones of ITT that allows for the develop-
ment of both leadership and product
development principles, ensuring that the
correct industry leading products are
developed to the accepted market driven
lead times. These principles have
allowed ITT to become the market leader
in all of our business portfolios.
Six Sigma Engineering
ITT, utilizing its six sigma tools and mul-
tiple lean initiatives, offers the most
experienced engineering design team in
the micro miniature interconnect field.
Using our systems approach, ITT contin-
ues to advance new interconnect tech-
nologies by developing advanced prod-
ucts including higher density Nano
0.025-inch spacing interconnects, Chip-
on-Flex filter connectors, flexible high
density circuits terminated directly to ITT
contacts, and innovative high speed
mixed signal connector configurations.
In conjunction
with our design
teams, ITT
operates a
world class test
lab offering
state of the art
capabilities in electronic, fiber optic, and
mechanical test expertise . Our certified
test engineers and technicians can
develop a specific test plan based on
our customer’s specific needs.
Additionally, our team is experienced in
providing test services and programs for
US DOD Defense electronics and Space
related programs.
Six Sigma Manufacturing
ITT operates manufacturing facilities in
the United States, France, Germany,
Italy, Mexico, China, and the UK, all of
Cannon Microminiature Products
2
www.ittcannon.com
which have particular prod-
uct area strengths allowing
ITT to offer a truly global
footprint to our customers.
Our facilities are world class
and accommodate full verti-
cal integration with the latest
manufacturing technologies
including: automated and
robotic machining centers,
Super Market manufacturing
cells, Kanban pull systems,
and automated electrical,
mechanical, and optical test and inspection equipment. The
combination of our manufacturing strength and our advanced
manufacturing facilities allows ITT to offer products at market
driven prices. Our capabilities, especially in robotics, comput-
erized precision tooling, Kaizen Project Management, Six
Sigma tools, and test labs, gives ITT the most optimized global
manufacturing footprint in the interconnect industry.
The Custom Difference
As the industry leader in harsh
environment interconnect appli-
cations, ITT’s world class engi-
neering teams will work directly
with our customers to design and develop cost effective solu-
tions for their applications . In many cases we may modify
one of our standarddesigns to ensure a highly reliable solu-
tion wheretiming is critical. Yet, in those cases whereacom-
plete custom interconnect solution is required, ITT will work
with our customer’sEngineers to design an interconnect solu-
tion which will be cost effective yet highly reliable. As profes-
sional consultants, our Engineering teams will provide a thor-
ough systems and mechanical analysis of any proposed solu-
tion. These analyses provide our customers with sophisticat-
ed electrical signal and mechanical charac-
terizations to determine the best solution for
their application.
In addition to custom
connectors, ITT offers
sophisticated custom
cable assembly capa-
bilities for a wide
range of harsh envi-
ronment applications.
Our in house expert-
ise translates to our ability to integrate differ-
ent technologies within a custom cable har-
ness. ITT's capabilities include discrete wire terminations to
multi wire cable harnesses with multiple connector configura-
tions as part of the final assembly. We also specialize in pro-
viding terminated flex circuit assemblies,
high temperature geophysical cable
assemblies, innovative medical electron-
ics cable assemblies, over mold strain
relief systems, and EMI shielded termina-
tions.
RoHS Compliance Information
ITT has implemented a strict
parts control plan for all ITT
electronics plants worldwide
that allows the Cannon Microminiature
connector product portfolio to meet the requirements of
European Union Directive 2002/95/EC better know as the
Reduction of Hazardous Substances initiative. To make things
easier for our customers, all Cannon Microminiature products
can be ordered with an R prefix number which insures our
customers will receive RoHS compliant parts for their commer-
cial electronics applications and equipment. Since most RoHS
hazardous substances center around specific metal plating
and lead solder coatings, ITT's products for RoHS compliance
are available in the following plating finishes: electroless nickel,
stainless steel, Anodize over aluminum and Gold plating. It
should be noted that gold plating
would be recommended as the
replacement for tin-lead solder
when ordering board mount con-
nectors.
Non Compliant RoHS Materials
Advanced Aerospace specifications and DOD system per-
formance requirements demand the necessity to maintain
production status for the primary base metals and Chem film
coatings typically utilized in Aerospace electronics. Thus, in
order to support ITT's Aerospace customer base and maintain
our leadership position
in micro miniature con-
nector technologies,
ITT will continue to
provide interconnect
products with cadmium
plating and tin lead
solder in support of
these markets. These
materials are designed
to be comparable to
M83513.
Please consult Customer Service if RoHS part verification is
required.
3
www.ittcannon.com
Cannon Microminiature Products
4
www.ittcannon.com
Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Microminiature Product Overview Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Twist Pin Contact System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Micro-D Metal Shell - .050" Contact Spacing (MDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Micro-D PCB - .050" Contact Spacing (MDM-PCB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Micro-D Coaxial/Power - .050" Contact Spacing (MDM-C/P). . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hermetic (MDMH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Filter (TMDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Micro-D Plastic Shell - .050" Contact Spacing (MD/MDV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Micro Center Jackscrew (MJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Microminiature Circular - .050" Contact Spacing (MIK, MIKM, MIKQ) . . . . . . . . . . . . . . . . . . . . 44
Microstrips .050" Contact Spacing (MT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
MicrominiatureStrip - .100/.050" Contact Spacing (MT)...............................52
Micro Edgeboard - .050" Contact Spacing (MEB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
The Centi Line - .075" Contact Spacing (2D). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Centi-D Loc-.075" Contact Spacing (CDL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Strip Connectors - .100"/.075" Contact Spacing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
The NANO Line - .025" Contact Spacing ..........................................70
Strip Connectors - .025" Contact Spacing (NT)......................................71
NANO D Metal Shell - .025" Contact Spacing (NDM) .................................72
Center Jackscrew - .030" Contact Spacing (NJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Custom Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Flex Circuit Cable Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Custom Back Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Appendix
StandardWire Termination “L” Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
StandardWire Termination “H” Code Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Wire Color Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Terminology ..............................................................84
Product Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
5
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Cannon Microminiature Product Overview Guide
MDM MDM PCB MDM
C/P
MDMH
Hermetics
TMDM
Filter
MD** MDB
Coaxial
MJS MIK MIKM
Type Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket
Current Rating 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max.
Contact
Resistance
8milliohms max. 8 milliohms max. 8 milliohms max. 24 milliohms max. 15 milliohms max. 8 milliohms max. 8 milliohms max.
(signal)
8milliohms max. 8 milliohms max. 8 milliohms max.
Contact
Material
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper and steel
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
Shell Metal Metal Metal Metal Metal Plastic Plastic Plastic Plastic Metal
Shell Material Aluminum Aluminum Aluminum Steel Aluminum Thermoplastic
&Thermoset
Thermoset Thermoplastic
&Thermoset
Thermoplastic Steel
Available
Layouts
9, 15, 21, 25, 31,
37, 51 & 100
9, 15, 21, 25, 31,
37, 51 & 100
7C/P2, 24C/P4,
27C/P5 &
10C/P10
9, 15, 21, 25, 31,
37 & 51
9, 15, 21, 25, 31,
37 & 51
9, 15, 21, 25, 31,
37 & 51
7C/P2
10, 26, 51 & 66 -
Rect/unshrouded
16, 28 & 35 -
Rect/shrouded 26,
38, 42 & 76 -
Polarized D
7&55 7, 55 & 85
Configuration Polarized D Polarized D Polarized D Polarized D Polarized D Polarized D Polarized D Rectangular &
Polarized D
Circular Circular
RoHS Available Available Available Available No Available Available Available Available Available
Factory
Terminated
Yes* Yes Yes Yes* Yes Yes* Yes Yes* Yes Yes
Space
Applications
Available Available Available Yes Yes Available Available Available Yes Yes
Page Number 7 18 22 23 25 28 32 39 44 44
*Solderpot versions available for end user termination
MIKQ MT* MEB 2D CDL CTA* NDM NTP NJS
Type Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket
Current Rating 3A max. 3A max. 3A max. 5A max. 5A max. 5A max. 1A max. 1A max. 1A max.
Contact
Resistance
8milliohms max. 8 milliohms max. 8 milliohms max. 9 milliohms max. 9 milliohms max. 9 milliohms max. 60 milliohms max. 60 milliohms max. 60 milliohms max.
Contact Material gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
precious metal
alloy & gold plated
copper alloy
precious metal
alloy & gold plated
copper alloy
precious metal
alloy & gold plated
copper alloy
Shell Metal Plastic Plastic Plastic Plastic Plastic Metal Plastic Plastic
Shell Material Steel Thermoplastic Thermoset Thermoplastic Thermoplastic Thermoplastic Thermoset Thermoset Thermoplastic
Available
Layouts
7, 19 & 37 MTV - 1 thru 120
MTB - 1 thru 80
64, 128, 92
& 184
19, 31, 52, 79
& 100
139 CTA3 - 1
thru 53
CTA4 - 1
thru 60
9, 15, 21, 25,
31 & 37
1thru 40 Rectangular -
9, 24 & 44
Circular - 27,
72 & 246
Configuration Circular Strip Polarized D Polarized D Polarized D Strip Polarized D Strip Rectangular &
Circular
RoHS Available Available Available Available Yes Yes Yes Yes Yes
Factory
Terminated
Yes Yes* Yes* No No No Yes Yes Yes
Space
Applications
Yes Yes Yes No No No Yes Yes Yes
Page Number 44 48 54 59 65 66 72 71 73
6
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Twist Pin Cannon Microminiature Products
SLEEVE
WIRE
WIRE CRIMP
CRIMP
AREA
WELDED TIP
Cannon
MICROPIN
Pos-A-Line Contact Alignment
The flexible twist-pin is recessed into the insulator and the rigid socket is
exposed, reversing the traditional positions of pin and socket. During mating, the
socket is guided into the pin insulator by the lead-in chamfer. The pin is kept
from flexing beyond the socket capture radius by the walls of the cavity. The
hemispherical weld of controlled radius at the tip of the pin combines with the
lead-in chamfers of the socket contact and the pin insulator to carn the pin into
alignment. By controlling the welding process and the dimensions of the socket
contact and the insulators, it is impossible for the recessed pin to escape the
socket capture radius.
NORMAL MATING
CONDITIONS
SEVERE MISALIGNMENT
TWIST PIN CONTACTS WILL MATE
EVEN UNDER SEVERE MISALIGNMENT
Figure 1
Figure 2
Twist Pin Contact Technology
The foundation of ITT’sCannon MicroConnector portfolio
starts with ITT’s innovative twist pin contact system. This sys-
tem was originally developed in the early 1960’s and ITT was
one of the original interconnect companies to license this
technology and improve it. Our forty five years of experience
in manufacturing and establishing a fully automated manufac-
turing system for this contact has truly given ITT the foremost
knowledge in twist pin contact technology.
As the core of our micro products, the twist pin contact offers
asuperior electrical and mechanical system that outperforms
traditional machined or stamped electrical contract systems.
ITT’stwist pin system consists of the MicroSocket and the
Micro pin or Twist pin. Figure I show the basic contacts.
Figure 1
The twist pin contact system consists of several stranded
cores making up the wire bundle. The strands are subse-
quently heat treated and a weld is performed on the tip of
each contact. Crimp sleeves are then inserted over the con-
tact and crimp areas are defined to produce a seamless crimp
system. The entire twist pin system is referred by ITT as a
Pos-A-Line contact alignment system. Our reference to this
system identifies that the flexible twist pin is recessed into the
insulator and the rigid socket is exposed thus reversing the
traditional positions of the pin and socket. During the mating
sequence, the socket is guided into the pin insulator by the
lead-in chamfer. The pin is kept from flexing beyond the sock-
et capture radius by the walls of the cavity. The hemispherical
weld of controlled radius at the tip of the pin combines with
the lead-in chamfer of the socket contact and the pin insula-
tor to cam the pin in alignment. ITT has developed a very
robust Six Sigma manufacturing process that controls the
welding process as well as the dimensions of the socket con-
tact and insulator material. The net result is a contact system
that makes it impossible for the recessed pin to escape the
socket capture radius. Figure 2 shows the twist pin features
as well as mating and severe misalignment conditions.
The advantages of ITT’stwist pin contact system are many
and have been field proven in the most demanding applica-
tions and environments for over forty five years. Some of
these advantages include:
Seven points of electrical contact (Micro0.050-inc & Centi
Line 0.075-inch Interconnect Products)
Five points of electrical contact (Nano 0.025-inch
Interconnect Products)
Contact and crimp sleeve materials carefully optimized for
extremely reliable crimps- No design tradeoffs
Seamless crimp sleeves
Multiple 4-indent wire crimps standard and smaller bore
micro socket contacts
Standard integral tail & thru bundle micro pin contacts (high
density packaging)
High mating cycles
High current handling capabilities
System qualification in numerous Aerospace, Defense
Electronic, and high temperatureGeophysical applications.
Wide array of wire terminations
The advantages listed above areby no means inclusive of
ITT’s innovative product improvement processes. Moving for-
ward, ITT plans to introduce additional new product features
supporting enhanced twist pin contact performance.
7
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D Metal Shell - .050" Contact Spacing MDM
MDM connectors are used in applications
requiring highly reliable, extremely small, light-
weight connectors with higher density contact
configurations than available in traditional rec-
tangular connectors. They are available in 8
shell sizes accommodating from 9 to 100 con-
tacts, and special arrangements of power and
coaxial contacts.
These connectors are designed to meet the rap-
idly increasing demands for an environmental,
high performance, rugged, moisture-sealed
microminiature connector. This connector
employs size 24 MICROPINTM/MICROSOCKETTM
contacts on .050 (1.27) centers in a contact
density identical to the standard MICRO-D con-
nector series, but with these additional features:
Aluminum shells to provide greater
strength, prevent chipping, cracking or
breaking, offer electromagnetic (EMI) and
RFI shielding.
Silicone elastomer compression interfacial
seal to provide a moisture and humidity
seal between each contact and between
contacts and shell.
Specifications
STANDARD MATERIALS AND FINISHES
Shell
Insulator
Contacts
Mounting Hardware
Kit, Jackpost (3) items
Washer
Standard Epoxy
- 6061-T6 Aluminum alloy per
QQ-A-200/8, yellow chromate/
cadmium, Type II, Class 3 over
electroless nickel per SAE
AMS-C-26074, Class 4.
-Liquid Crystal Polymer per MIL-M-24519,
Type GLCP-30F (9-100)
- Glass filled diallyl phthalate per
MIL-M-14, Type SDGF (7*2 and 24*4)
- Polyphenylene sulfide per
MIL-M-24519, Type GST-40F (16*5)
- Polyester per MIL-M-24519, Type
GPT-30F (10*10)
- Copper alloy, gold plate
- 300 Series stainless steel, passivate
- 300 Series stainless steel, passivate
- 400 Series stainless stell, passivate
-Hysol EE4215/HD3561, color black
or Hysol EE4198/HD3561, color green
Coupling
Polarization
Contact Spacing
Centers
Shell Styles
No. of Contacts
Coaxial Cable
Wire Size
Contact Termination
- Friction/jackscrews
- Keystone-shaped shells
- .050 (1.27)
- Plug and receptacle
- 9 thru 100 signal;
5 signal/2 coaxial;
5 signal/2 power;
11 signal/5 coaxial;
11 signal/5 power;
0 signal/10 coaxial;
0 signal/10 power;
20 signal/4 coaxial;
20 signal/4 power
- RG - 178/U
- #24 thru #32 AWG
- Multiple indent crimp
MECHANICAL FEATURES
Performance Data
The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where
applicable. Data is applicable to standard connectors with standard termination. Variations may affect this
data, so please consult customer service for further information on your requirements.
Tes t
Dielectric Withstanding
Voltage
Method 3001:
Insulation Resistance Method 3003
600 VAC at sea level
150 VAC at 70,00' altitude
No breakdown
No breakdown
5,000 megohms minimum
No physical damage
No physical damage
No loss of continuity >1µsec
No physical damage
No loss of continuity >1µsec
No mechanical or electrical defects
Insulation resistance >100 megohms
Shall be capable of matingand unmating,
and meet contact resistance requirements
8milliohms maximum
10milliohms maximum
5lb. minimum axial load
-55˚C to +125˚C
50 G's, 3 axes, 6millisecond
duration sawtooth pulse
20 G's, 10-2,000 Hz. 12hrs
48hours
At 3 amps
At 1 milliamp
Thermal Shock Method 1003. Condition A:
Physical Shock Method 2004, Condition E:
Vibration Method 2005,Condition IV:
Durability 500 cycles of matingand
unmating,500 CPH max.
Moisture Resistance Method 1002, Type II, omit steps 7a& 7b
Salt Spray Method 1001, Condition B:
Contact Resistance
(MIL-STD-202)
Method 1001, Condition B:
Contact Retention
Per 83513-Style
Method Criteria of Acceptance
8
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D Metal Shell - .050" Contact Spacing MDM
How to Order
For 83513-Style ordering information see pages 16 and 17
SERIES
RoHS COMPLIANCE
MDM 51 P H 001 P XXX- -
SERIES
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODE
TERMINATION CODE*
HARDWARE
MDM: (Size 9-100) Liquid Crystal Polymer (LCP)
MDM: (Combo Layout) Diallyl Phthalate (DAP)
(H) 001 - 18",7/34 strand,#26 AWG,
MIL-W-16878/4, Type E Teflon, yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681 System I.
M - Military specification hardware, see
page 11 for military hardware codes.
P - Jackpost
K - Jackscrew-standard profile
L - Jackscrew-low profile
F - Float mount
B - No hardware standard
.091 (2.31) dia. hole for sizes 9-51;
.120 (3.05) dia. hole for size 100.
A - .125 (3.18) dia. mounting holes for sizes 9-51;
.166 (4.22) dia. hole for size 100.
B1 - .1475 (3.75) dia. hole for size 100
(Per 83513-Style)
No Number - (Standard cadmium/yellow
chromate over nickel
A174 - Electroless nickel
A172 - Gold over nickel
A141 - Irridite/alodine
A30 - Black anodize
*See page 79 and 81 for additional Termination codes.
9-15-21-25-31-37-51-100 (standard)
16C5, 10C10, 7C2, 24C4 (coaxial)
16P5, 10P10, 7P2, 24P4 (power)
P - Pin S - Socket
H - Harness-insulated wire.
L - Solid-uninsulated wire.
S - Solder pot to accept #26 AWG MAX.
harness wire. (Not available with power
contact arrangements.)
or combination of
coax and power
SHELL FINISH MOD CODES
HARDWARE
SHELL FINISH MOD CODES
}
(L) 1 - 1/2" uninsulated solid #25
AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG
gold plated copper.
R
Micro-D Metal Shell - .050" Contact Spacing MDM
COTS or Non Mil-Spec or Commercial or Industrial Standard Wire Termination Codes
9
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Harness Type (H) Solid Uninsulated Type (L)
Length
3(76.2)
6 (152.4)
8 (203.2)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
* Cavity #1 black
H020
H019
H026
H029
H028
H001
H038
H009
H010
H011
H013
H017
H042
H027
H016
H034
H025
H002
H003
H023
H004
H005
H006
H048
H046
H041
L61
L56
L57
L39
L58
L1
L14
L2
L7
L6
L16
L10
.125 (3.18)
.150 (3.81)
.190 (4.83)
.250 (6.35)
.375 (9.52)
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
#26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded. #25 AWG gold plated copper
All Yellow Color Coded* Termination Code Length
The following termination codes are listed for your information. For additional codes please refer
to Appendix on page 79 and 81. All wire lengths are minimum.
Cannon Modification Code (Not MS)
Contact Arrangements
Micro-D Metal Shell - .050" Contact Spacing MDM
COTS or Non Mil-Spec or Commercial or Industrial Shell Dimensions (Conforms to 83513-Style)
10
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Plug
Receptacle
Receptacle (MDM-100 only)
Solder Pot
Solder Pot
Pigtail termination
.110 (2.79)
MAX.
.110 (2.79)
MAX.
.200 (5.08)
MAX.
.200 (5.08)
MAX.
D
D
D
F
F
F
TWO MTG. HOLES
.091 ±.003(2.31 ±0.08)
TWO MTG. HOLES
.091 ±.003(2.31 ±0.08)
TWO MTG. HOLES
.120 ±.003(3.05 ±0.08)
.284 (7.21)
MAX.
.296 (7.52)
MAX.
.416 (10.57)
MAX.
.429 (10.09)
MAX.
.429 (10.90)
MAX. .198 (5.03)
MAX.
.296 (7.52)
MAX.
.394 (10.01)
MAX.
C
C
C
B
B
B
.186 (4.72)
MAX. .093
(2.36)
REF.
.093
(2.36)
REF.
.093 (2.36)
REF.
.198 (5.03)
MAX.
A
A
A
E
E
E
G
G
G
Part Number
By Shell Size
MDM-9P*
MDM-9S*
MDM-15P*
MDM-15S*
MDM-21P*
MDM-21P*
MDM-25P*
MDM-25S*
MDM-31P*
MDM-31S*
MDM-37P*
MDM-37S*
MDM-51P*
MDM-51S*
MDM-100P*
MDM-100S*
.785 (19.94)
.785 (19.94)
.935 (23.75)
.935 (23.75)
1.085 (27.56)
1.085 (27.56)
1.185 (30.10)
1.185 (30.10)
1.335 (33.91)
1.335 (33.91)
1.485 (37.72)
1.485 (37.72)
1.435 (36.45)
1.435 (36.45)
2.170 (55.12)
2.170 (55.12)
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.10)
*Add lead type and length; see How To Order. ***Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails.
.400 (10.16)
.400 (10.16)
.550 (13.97)
.550 (13.97)
.700 (17.78)
.700 (17.78)
.800 (20.32)
.800 (20.32)
.950 (24.13)
.950 (24.13)
1.100 (27.94)
1.100 (27.94)
1.050 (26.67)
1.050 (26.67)
1.442 (36.63)
1.442 (36.63)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.310 (7.87)
.310 (7.87)
.360 (9.14)
.360 (9.14)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.394 (10.01)
.394 (10.01)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.063 (1.79)
.063 (1.79)
.084 (2.39)
.083 (2.37)
.105 (2.99)
.104 (2.97)
.119 (3.39)
.118 (3.36)
.140 (3.99)
.139 (3.96)
.161 (4.59)
.160 (4.56)
.193 (5.50)
.188 (5.35)
.500 (14.3)
1.040 (29.5)
A
Max.
B
Max.
C
Max.
D
Max.
E
Max.
F
+_.005
(0.13)
G
Max.
Average Weights**
oz. (gm.) ±5%
Panel Mounting Dimensions (Sizes 9 - 100)
.200 ±.005
(5.08 ±0.13)
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
.395 ±.005
(10.03 ±0.13)
.300 ±.005
(7.62 ±0.13)
Micro-D Metal Shell - .050" Contact Spacing MDM
Panel Cutouts
11
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
++ ++
++ ++
Shell Sizes 9 thru 51
Shell Size 100
Figure 1
Front Mounting
D
TYP. D
TYP.
B
C
C
A
A
B
.100
(2.54)
R TYP.
.450±.002
(11.43±0.05)
FULL R.
(TYP. )
C
.030 (0.76) TYP.
D
PANEL REF.
)
.118
(3.00
1.805
(45.85
.015 (0.38)
R. MAX (TYP. )
FULL R. (TYP. ) FULL R. (TYP. ) FULL R. (TYP. ) PANEL REF.
)
.118
(3.00 )
.118
(3.00 )
)
+.005
-.000 1.805
(45.85 )
1.805
(45.85 )
.125
(3.18 )
1.456
(36.98 )
+0.10
-0.00
.361
(9.17 )
1.520
(38.61 )
.401
(10.18
.450+_.002
(11.43+_0.05) .030
(0.76) TYP.
)
.015 (0.38)R.
MAX.(TYP)
FULL R.
(TYP. )
FULL R. (TYP. )
26˚/27˚TYP
Figure 2
Rear Mounting
Figure 3
EdgeboardMounting
Figure 1
Front Mounting
Figure 2
Rear Mounting
Figure 3
EdgeboardMounting
NOTE: See page 13 for rear panel mounting configuration.
+0.13
-0.00
+.005
-.000
+0.13
-0.00
+.004
-.000
+0.10
-0.00
+.004
-.000
+.005
-.000
+0.13
-0.00
+0.10
-0.00
+.004
-.000
+0.10
-0.00
+.004
-.000
+.005
-.000
+0.13
-0.00
+.005
-.000
+0.13
-0.00
+.005
-.000
+0.13
-0.00
+.005
-.000
+0.13
-0.00
Shell
Size
Cutout
Figure
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
.408
.401
-
.558
.551
-
.708
.701
-
.808
.801
-
.958
.951
-
1.108
1.101
-
1.058
1.051
-
.271
.252
-
.271
.252
-
.271
.252
-
.271
.252
-
.271
.252
-
.271
.252
-
.315
.295
.570
.570
.570
.720
.720
.720
.870
.870
.870
.970
.970
.970
1.120
1.120
1.120
1.270
1.270
1.270
1.220
1.220
1.220
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
9
15
21
25
31
37
51
A
+.004
-.000
B
+.004
-.000
C
+.005
-.000
D
+.005
-.000
For 9-51 Shell Sizes
NOTES:
1. Front panel mounting is the preferred mounting
method. Front panel mounting dimensions
(figure1) will accommodate either #2-56 screws
or jackpost hardware.
2. Rear panel mount dimensions (figure 2) will
accommodate #2-56 screw hardwareonly.
When mounting the connector with rear panel
mount jackpost see the panel cut-out
dimensions.
3. Edgeboardmounting bracket (figure 3) uses #2-
56 screws. Dimension .450+/-.002 (11.43+/-
0.05) locates the MDM receptacle flush with the
end of the board.
For 100 Shell Size
NOTES:
1. Front mounting is the preferred mounting
method. Front panel mounting dimensions
(figure1) will accommodate either #4-40 screws
or jackpost hardware.
2. Rear panel mount dimensions (figure2) will
accommodate #4-40 screw hardware only see
the panel cut-out dimensions.
3.Edgeboardmounting bracket (figure3) uses #4-
40 screws. Dimension .450+/-.002 (11.43+/-
0.05) locates the MDM receptacle flush with the
end of the board.
Micro-D Metal Shell - .050" Contact Spacing MDM
Mounting Hardware Views (for sizes 9-51)
12
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Screw Lock Assembly
90˚ Angle Mounting
Bracket
Screw Lock Assembly*
*NOTE Torque value is 2.5 in/lbs max.
Jackpost - (P)
90˚ Angle Mounting Bracket
This hardware supplied unassembled.
.052
(1.32) TYP.
.260
(6.60) MAX.
#2-56
UNC-2B
THD
B
.178 ± .005
(4.52 ± 0.13)
.096 ± .005
(2.44 ± 0.13)DIA.
.093 (2.36)
RECOMMENDED
PANEL THICKNESS
BUSHING
.182 (4.62)
MAX. .688 (17.48)
MAX.
.408 (10.36)
MAX.
RETAINING
CLIP
LOCK
SCREW
MATING
FACE
CONNECTOR
SHOWN FOR
REF. ONLY
#2-56 UNC-2B
.185 (4.70) MAX.
.500
(12.7)
MAX.
PANEL REF.
.232 (5.89) MAX.
#2-56 UNC-2A
.170
(4.32) MAX.
A
Description
Screw Lock Assembly
Jackpost kit
Mounting Bracket 90˚ MDM
for 9 thru 37 Shell Sizes
Mounting Bracket 90˚ MDM
for 51 Shell Size
NOTES: Screw lock assembly (322-9500-000) can be used for front mounting only. Jackpost kit
(320-9505-000) consists of two assmblies, shipped unassmbled.
322-9500-000
320-9505-000
015-9516-002
015-9516-003
.147 (3.73)
.169 (4.29)
.308 (7.82)
.350 (8.89)
N/A
N/A
Part Number
A
+/-.005 (±0.13)
B
Max.
Jackpost Bushing (for rear panel mounting-for sizes 9-51)
3/32 (2.4)
1/16 (1.6)
3/64 (1.2)
1/32 (0.8)
*A kit consists of 2 jackpost, 2 nuts, 2 washers.
.087 (2.21)
.056 (1.42)
.042 (1.07)
.025 (0.64)
320-9505-007
320-9505-006
320-9505-005
320-9505-004
Panel A
Thickness
Jackpost Kit
Number*
9
15
21
25
31
37
51
.401 (10.19)
.551 (14.00)
.701 (17.81)
.801 (20.34)
.951 (24.16)
1.101 (27.97)
1.051 (26.70)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.295 (7.49)
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
1.115 (28.34)
1.265 (32.13)
1.215 (30.86)
Shell
Size
Plugand Receptacle Dimensions
Jackpost diameter within the "A"
dimension is .124/.120 (3.15/3.05).
HEX IS .135 (3.43)/.115 (2.92) ACROSS FLATS
#2-56 UNC-2B THD
MATING FACE
.170 (4.32)
.185 (4.70)
A
.500 (12.7)
.480 (12.19)
#2-56 UNC
2A THD
.126 (3.20)
.125 (3.18)
DIA. TYP
.105 (2.67)
.100 (2.54)
R TYP.
27˚
26˚ TYP
A
C
B
A
+.004 (0.10)
-.000 (0.00)
B
+.004 (0.10)
-.000 (0.00)
C
+_.005(0.13)
A
+.005(0.13)
-.000 (0.00)
Micro-D Metal Shell - .050" Contact Spacing MDM
Mounting Hardware Views (sizes 9-51)
13
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
This hardware is factory installed.
.014 ± .004
(0.36 ± 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.150 ± .003
(3.81 ± .076)
.185 (4.70)
MAX .093
(2.36)
REF.
.090 ± .0015
(2.29 ± 0.038)DIA .031 ± .003
(0.79 ± 0.08)
MATING
FACE
MATING
FACE
#2-56
UNC-2A
.490
(12.45) MAX
.735 (18.67)
MAX.
MATING
FACE
CONNECTOR
SHOWN FOR
REF ONLY
HEX HEAD -
.050 (1.27) ACROSS FLATS
.050 (1.27) DEEP (REF)
.155
(3.94) MAX.
PART HAS A .040 (1.02)
MAX. AXIAL FLOAT
#2-56 UNC-2A
Jackscrew - (L) Low ProfileJackscrew - (K) Standard ProfileFloat Mount - (F)
Shown here is a cutaway view of the float mount for the MDM connector. The basic shell dimensions
are the same for the float mount and the screw mounting hole configurations. View shown is for standard
float mount front panel mounting. Reverse mounting is available on request.
* NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-2.5 in-lbs
Standard Jackscrew (K)-2.5 in-lbs
PART HAS A .040 (1.02)
MAX AXIAL FLOAT
CONNECTOR
SHOWN FOR
REF. ONLY
Mounting Hardware to Military Specification (for sizes 9 - 100) per 83513/5-Style
This hardware supplied in kits unassembled (2 pieces of each item).
#2-56 UNC-2A
THREAD TYP.
PLUG (REF. WITH
.092 (2.34) DIA.
MOUNTING HOLES
POTTING WELL (REF.)
.361 (9.17) MAX.
.390 (9.91) MAX.
SIZE 100 ONLY
.010 (0.25)
TH'K (REF.)
.062 (1.57)
HEX. (REF.)
.868 (22.05) MAX.
.902 (22.91) MAX.
.010 (0.25)
TH'K (REF.)
#2-56 UNC-2A
THREAD TYP.
PLUG (REF.) WITH
.092 (2.34) DIA.
MOUNTING HOLES
POTTING WELL
(REF.)
Figure 1. Jackscrew - Low profile
Slotted Head
Size 9-51
Size 100*
Allen head
Optional Head Configuration
Plug and Receptacle
Low and High Profile
Size 9-51
Size 100* (same dimensions)
Figure 2. Jackscrew - High Profile
Slotted Head
Size 9-51
Size 100*
To order hardware kits separately, order either by M83513/5-Style** or by 320-950X-XXX.
Description
Slotted Head Jackscrew Assy Low Profile (Figure 1) M5 320-9508-025
M6 320-9508-027
M2 320-9508-026
M3 320-9508-028
M7 320-9505-033
05
06
02
03
07
M15 320-9508-021
M16 320-9508-023
M12 320-9508-022
M13 320-9508-024
M17 320-9505-030
*Size 100 requires B1 size mounting holes for Mil-Spec hardware
Note: Torque values as follows:
Size 9-51 4.0 in-lbs
Size 100 6.0 in-lbs
15
16
12
13
17
Slotted Head Jackscrew Assy Low Profile (Figure 2)
Allen Head Jackscrew Assy Low Profile (Figure 1)
Allen Head Jackscrew Assy High Profile (Figure 2)
Jackpost Assy (Figure 3)
Size 9-51
Mod Code Part Number Size 100*
Mod Code Part Number
*** *
.125 (3.18) HEX.
.187 (4.75) HEX.
#2-56 UNC-2B THREAD
#4-40 UNC -2A THREAD
LOCKWASHER
RETAINING NUT
.154 (3.91) HEX.
.187 (4.75) HEX.
.062 ± .010
(.157 ± 0.25)
SIZE 100 SAME
.475 ± .025
(12.06 ± 0.64)
SIZE 100 SAME
.190/.185(4.83/4.70)
.185/.175(4.70/4.44)
Figure 3. Jackpost Assembly
Size 9-51
Size 100*
Micro-D Metal Shell - .050" Contact Spacing MDM
Mounting Hardware Views (for size 100)
14
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
This hardware supplied unassembled.
#4-40 UNC-2A THD
#4-40 UNC-2B NOTHING OR FEMALE THD
.185 (4.70)
MAX.
.500 (12.70)
MAX.
PANEL -
MAY BE USED WITH
.093 (2.36) MAX
THICK PANEL
.123 ± .005
(3.12 ± 0.13) DIA.
#4-40 UNC-2B
THD
A
.395 (10.03)
MAX.
.235 ± .005
(5.97 ± 0.13)
.064 ± .010
(1.62 ± 0.25) TYP.
B
180
(4.57 )
+.010
-.005
+.025
-0.13
Jackpost - (P)
90˚Angle Mounting
Bracket
90° Angle Mounting
Bracket
Description
Jackpost kit
Mounting Bracket 90˚ MDM
320-9505-015
015-9528-000 .191 (4.85) .370 (9.40)
N/A
Part Number A
± .005 (0.13)
B
Max.
#4 LOCK WASHER
MATING SIDE
Note: Size 100 requires .120 dia (B) mounting hole
when using Commercial (P) jackpost kits.
MATING
FACE
#4-40
UNC-2A
THD
.735 (18.67)
MAX.
Jackscrew - (K) Standard
PART HAS A .040 (1.02)
MAX AXIAL FLOAT
CONNECTOR
SHOWN FOR
REF. ONLY
This hardware is factory installed.
.014 ± .004
(0.36 ± 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.174 ± .005
(4.4 ± .10)
.185 (4.70)
MAX .093
(2.36)
REF.
.116 ± .002
(2.29 ± .051)
DIA .031 ± .003
(0.79 ± 0.08)
MATING
FACE
Float Mount - (F) Std.
HEX. SOCKET HEAD.
.078 (1.98) ACROSS FLATS
.050 (1.27) MIN. DEPTH
.155 (3.94) MAX.
.040 (1.02) MAX.
AXIAL FLOAT
#4-40 UNC-2A THD
MATING SIDE
*NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-4.0 in-lbs
Standard Profile Jackscrew (K)-4.0 in-lbs
Jackscrew - (L) (Low Profile)
Jackpost Bushing (for Rear Panel Mounting)
ENGAGING FACE
RECEPTACLE SHOWN
FOR REF. ONLY
#4-40 THREAD
RETAINING NUT
.500 (12.70)
MAX.
.185 (4.70)
.170 (4.32)
A
#4-40 UNC-2B
3/16" HEX.
LOCKING POST
.125
(3.18
1.516
(38.51
.401
(10.18
1.800 ± .005
(45.72 ± 0.13)
.161 (4.09)
.159 (4.04) DIA.
R
)
+.004
-.000
+1.10
-0.00
)
+.004
-.000
+1.10
-0.00
)
+.005
-.000
+0.13
-0.00
Panel
Thickness
Jackpost Kit
Number*
Dimensions for Rear Panel Mounting
A
+.005 (0.13)
-.000 (0.00)
3/32 (2.4)
1/16 (1.6)
1/32 (0.8)
3/64 (1.2)
*2 jackposts, 2 nuts, 2 washers
.087 (2.21)
.058 (1.42)
.025 (0.64)
.042 (1.07)
320-9505-013
320-9505-012
320-9505-010
320-9505-011
Torque value for size 100
Note: Size 100 requires B mounting hole shell
size when using rear panel mount jackposts
Micro-D Metal Shell - .050" Contact Spacing MDM
Connector Saver
15
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
.040 (1.02) MAX. ALLOWABLE
AXIAL FLOAT JACKSCREW/JACKPOST BUSHING
(FOR REFERENCE ONLY SEE
ORDERING INFORMATION BELOW.)
MICROSOCKET
CONNECTOR RECEPT
INTERFACIAL SEAL
.185 (4.70) MAX. (TYP. )
E-RING (TYP. )
CONNECTOR, PLUG
BACKPOTTING, EPOXY
.790 (20.07) MAX.
.315
(8.00)
MAX.
.090 (2.29) REF.
(TYP. )
.900 (22.86) REF.
MDM Size 9 Shown
#2-56 UNC-2A THD (9-51)
(TYP. )
MICROPIN
C
BA
Save wear and tear on your equipment and
systems connectors by using the "Connector
Saver".
The multi-matings and unmatings experienced
by most connectors during testing and final
check out can be eliminated.
Simply mate the "Connectors Saver" to your
unit and use the opposite side for your testing
interface...less wear, less tear, less chance of
damage. It is available in all eight standard
MDM layouts. Mating hardware is available
and can be ordered either separately or
included with the connector saver.
Size
9
15
21
25
31
37
51
100
MDM98479-86
MDM98479-87
MDM98479-88
MDM98479-89
MDM98479-90
MDM98479-91
MDM98479-92
MDM98479-93
MDM98479-18
MDM98479-19
MDM98479-20
MDM98479-21
MDM98479-14
MDM98479-15
MDM98479-16
MDM98479-17
MDM98479-78
MDM98479-79
MDM98479-80
MDM98479-81
MDM98479-82
MDM98479-83
MDM98479-84
MDM98479-85
MDM-97294-371
MDM-97294-372
MDM-97294-373
MDM-97294-374
MDM-97294-375
MDM-97294-376
MDM-97294-377
MDM-97294-717
320-9505-014**
320-9505-014**
320-9505-014**
320-9505-014**
320-9505-014**
320-9505-014**
320-9505-014**
320-9508-014***
.785 (19.94)
.935 (23.75)
1.085 (27.56)
1.185 (30.10)
1.335 (33.91)
1.485 (37.72)
1.435 (36.45)
2.170 (55.12)
Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings.
Size 9-51-#2-56 UNC-2B Thread
Size 100-#4-40 UNC-2B Thread
*
**
***
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
1.115 (28.32)
1.265 (32.13)
1.215 (30.86)
1.800 (45.72)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.91)
.394 (10.01)
With Hardware
Electroless Nickel (A174) Plated Cadmium over Nickel (A101) Plated
W/O Hardware With Hardware W/O Hardware *Hardware Kits A
Max.
B
± .005 (0.13)
C
Max.
Micro-D Metal Shell - .050" Contact Spacing 83513-Style
How to Order - 83513-Style Part Number Nomenclature – Slash Sheets 1-9
16
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
SERIES
Metal Shell, Liquid Crystal Polymer (LCP)
Diallyl Phthalate Insulator
Polyester Insulator
MDM
MDB
MDVB
-
-
-
-
Plug, Connector, Solderpot
Receptacle, Connector, Solderpot
Plug, Connector, Crimp Type
Receptacle, Connector, Crimp Type
Hardware Only
Plug, Connector, Solderpot
Receptacle, Connector, Solderpot
Plug, Connector, Crimp Type
Receptacle, Connector, Crimp Type
Metal Shell
Plastic
01
02
03
04
05
06
07
08
09
-
-
-
-
-
-
-
-
-
long, #26 AWG per MIL-W-22759/11-26-9 (all white)
long, #26 AWG per MIL-W-22759/11-26-9 (all white)
long, #26 AWG per MIL-W-22759/11-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
long, #26 AWG per MIL-W-22759/11-26-
Color Coded per MIL-STD-681, System 1, 10 colors repeating
long. #25 AWG, type S per QQ-W-343,
Gold Plated
long, #25 AWG, type S per QQ-W-343,
Gold Plated
long, #25 AWG, type S per QQ-W-W-343,
Tin Plated
long, #25 AWG, type S per QQ-W-343,
Tin Plated
long, #26 AWG per MIL-W-22759/33-26-9 (all white)
long, #26 AWG per MIL-W-22759/33-26-9 (all white)
long, #26 AWG per MIL-W-22759/33-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
long, #26 AWG per MIL-W-22759/33-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
long, #26 AWG per MIL-W-22759/11-26-9 (all white)
long, #26 AWG per MIL-W-22759/11-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
long, #26 AWG per MIL-W-22759/33-26-9 (all white)
long, #26 AWG per MIL-W-22759/33-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
18"
36"
18"
36"
.5"
1.0"
.5"
1.0"
18"
36"
18"
36"
72"
72"
72"
72"
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
100 Contact
METAL SHELL
No Number - For Solderpot
For every Mil Spec Part Number, ITT has one corresponding
part number shown an example
-
-
-
-
-
-
For space application, connector shell finish must be "A174"
and wire must be per MIL-W-22759/33-26.
Any deviations to these P/N's will result in assignment ofa
special P/N, consult factory.
Size 100 not available in / 06 through / 09. (Plastic shell)
Color coding in accordance with MIL-STD-681, System 1,
no parenthesis. See page 83 for color code chart.
For mounting hardware to Military Specification (sizes 9 to 100)
see page 13.
No number - for plastic type connector
C– for Cadmium/Yellow chromate over nickel
NA174 - Electroless Nickel A174
Tolerance on wire lengths:18", 36" and 72" long
+1.00"/-0.00"
.5" and 1.00" —+.200"/-.000"
PLASTIC
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
A
B
C
D
E
F
G
H
-
-
-
-
-
-
-
-
M83513/ 01*** * * *H100--
83513-Style SLASH SHEET
INSERTARRANGEMENT
WIRE TYPE
SHELL FINISH
NOTES:
7
5
5
6
6
3
3
36
3
7
6
5
4
-
1
3
236
6
3
36
Micro-D Metal Shell - .050" Contact Spacing 83513-Style
How to Order - 83513-Style Part Number Nomenclature – Slash Sheets 10-27
17
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
SERIES
Connector, Electrical, Rectangular
Microminiature, Polarized Shell
PC Board Mounting
long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
.109"
.140"
.172"
01
02
03
-
-
-
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
100 Contact
METAL SHELL
No Number - For Solderpot
-
-
-
For space application, connector shell finish must be "N".
Any deviations to these P/N's will result in assignment
ofa special P/N, consult customer service. No letter - for plastic type connector
C - Cadmium / Yellow chromate over nickel
N - Electroless Nickel
Tolerance on wire lengths ±.015
A
B
C
D
E
F
G
H
-
-
-
-
-
-
-
-
M83513/ 10 * *CA-
MIL-C-83513 SLASHSHEET
INSERT ARRANGEMENT
WIRE TYPE
SHELL FINISH
NOTES:
2
3
N-Nojackpost
P-Jackpost (permanently attached)
T - Threaded insert
*
HARDWARE
3
4
-
1
3
2
For every Mil Spec Part Number, ITT has one
corresponding part number
10 Connector, Plug, Condensed BoardRightAngle (CBR), Sizes 9 37
11 Connector, Plug, CBR, Size 51
12 Connector, Plug, CBR, Size 100
13 Connector, Receptacle, CBR, Sizes 9 37
14 Connector, Receptacle, CBR Size 51
15 Connector, Receptacle, CBR, Size 100
16–Connector, Plug, Board Right Angle (BR), Sizes 9 37
17 Connector, Plug, BR, Size 51
18–Connector, Plug, BR, Size 100
19 Connector, Receptacle, BR, Sizes937
20 Connector, Receptacle, BR Size 51
21 Connector, Receptacle, BR Size 100
22 Connector, Plug, Board Straight (BS), Sizes 9 37
23 Connector, Plug, BS, Size 51
24 Connector, Plug, BS, Size 100
25 Connector, Receptacle, BS, Sizes 9 37
26–Connector, Receptacle, BS, Size 51
27 Connector, Receptacle, BS Size 100
Micro-D PCB - .050" Contact Spacing MDM-PCB
How to Order - MDM-PCB Series
18
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
MDM-PCB connectors are designed for use
with flex circuitry, flat cable and printed circuit
boards or multi-layer boards. They use the
standard MDM metal shell and provide high
density and high reliability in board-to-board,
board-to-cable and cable-to-cable applications.
MDM-PCB connectors are available in 8 shell
sizes with 9 to 100 contacts. Terminations
may be straight (BS) or at 90˚ right angle (BR,
CBR) board thickness. Jackpost mounting for
use with locking hardware is also available.
SERIES
INSULATOR MATERIAL
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
MOUNTING HARDWARE (Shell Flange)
MOUNTING HARDWARE FOR PCB
TERMINATION TAIL LENGTH MODIFICATION CODE
SHELL FINISH MODIFICATION CODES
SERIES
MOUNTING HARDWARE FOR PCB
TERMINATION TAIL LENGTH MODIFICATION CODE
SHELL FINISH MODIFICATION CODES
INSULATOR MATERIAL
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
MOUNTING HARDWARE (Shell Flange)
MDM - Micro "D" Metal Shell
T - Threaded Insert
#2-56 Thd for Shell Sizes 9 thru 51
#4-40 Thd for Shell Size 100
No letter - none
None - .109 (2.77) ±.015 (0.38) Standard
L61 - .125 (3.18)
L56 - .150 (3.81)
L57 - .190 (4.83)
L39 - .250 (6.35)
L58 - .375 (9.52)
None - Yellow Chromate/Cadmium over Nickel
A174 - Electroless Nickel
A172 - Gold over Nickel
A141 - Irridite/Alodine
A30 - Black Anodize
(For special modification codes, consult
customer service.)
NOTE: Back molding material –
Epoxy Hysol #MG40FS
MDM * - - 25 P PBS T L39 A174
Liquid Crystal Polymer (LCP)
9, 15, 21, 25, 31, 37, 51, and 100
P - Pin (Plug)
S - Socket (Receptacle)
BS - Straight PCB Termination
BR - Right Angle PCB Termination
CBR - Right Angle Narrow Profile PCB Terminations
P - Jackposts
M7 - Jackposts
M83513/5-07 (Sizes 9-51)
M17 - Jackposts
M83513/5-17 (Size 100)
No letter - none
RoHS COMPLIANCE
R
Micro-D PCB - .050" Contact Spacing MDM-PCB
BS (Board Straight) Series
19
www.ittcannon.com
*
.096 ± .005
(2.44 ± 0.13) DIA.
Size 9-51)
.120 ± .005
(3.05 ± 0.13)
Size 100
CAV.
#1LAST
CAV.
G
JACKPOST (9-51)
#2-56 UNC-2B TYP.
JACKPOST (100)
#4-40 UNC-2B TYP.
.186 (4.72) MAX. PLUG
.198 (5.03) MAX. RECEPTACLE
.109 ± 0.15
(2.77 ± 0.38)
D
E
H
J
K
LAST CAV.
CAV. #1
.050
(1.27)
6789
12345
9 10 11 12 13 14 15
1 2 3 4 5 6 7 8
12 13 14 15 16 17 18 19 20 21
1 2 3 4 5 6 7 8 9 10 11
14 15 16 17 18 19 20 21 22 23 24 25
1 2 3 4 5 6 7 8 9 10 11 12 13
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
19 35
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
.050
(1.27) .050
(1.27) .100
(2.54)
TYP.
.150
(3.81)
.150
(3.81)
.150
(3.81) .150
(3.81)
.150
(3.81)
.050
(1.27)
.050
(1.27)
.050
(1.27)
.150
(3.81)
.375
(9.53)
.225
(5.72)
TYP.
.225
(5.72)
PCB Termination Arrangements* (Viewed from PCB solder side)
9 Contacts
31 Contacts
15 Contacts
37 Contacts
100 Contacts
51 Contacts
21 Contacts 25 Contacts
Identification number shown for plug connector, use reverse order for socket connector.
NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)
NOTE: Dimensions shown are for reference only-consult factory for final design dimensions.
.100 (2.54)
REF.
F
A
B
C
B
±.007 (.18)
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
Part Number
By Shell Size
A
Max.
C
±.005 (.13)
D
Max.
E
Max.
F
Max.
G
Max.
H
Max.
J
Max.
K
Max.
MDM-9PBS*
MDM-9SBS*
MDM-15PBS*
MDM-15SBS*
MDM-21PBS*
MDM-21SBS*
MDM-25PBS
MDM-25SBS*
MDM-31PBS*
MDM-31SBS*
MDM-37PBS*
MDM-37SBS*
MDM-51PBS*
MDM-51SBS*
MDM-100PBS*
MDM-100SBS*
1.390 (35.31)
1.390 (35.31)
1.390 (35.31)
1.390 (35.31)
1.690 (43.93)
1.690 (43.93)
1.740 (44.20)
1.740 (44.20)
2.040 (51.82)
2.040 (51.82)
2.340 (59.44)
2.340 (59.44)
2.270 (67.66)
2.270 (67.66)
3.070 (77.98)
3.070 (77.98)
1.150 (29.21)
1.150 (29.21)
1.150 (29.21)
1.150 (29.21)
1.450 (36.83)
1.450 (36.83)
1.500 (38.10)
1.500 (38.10)
1.800 (45.72)
1.800 (45.72)
2.100 (53.34)
2.100 (53.34)
2.000 (50.80)
2.000 (50.80)
2.800 (71.12)
2.800 (71.12)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
.785 (19.94)
.785 (19.94)
.935 (23.75)
.935 (23.75)
1.085 (27.56)
1.085 (27.56)
1.185 (30.10)
1.185 (30.10)
1.335 (33.91)
1.335 (33.91)
1.485 (37.72)
1.485 (37.72)
1.435 (36.45)
1.435 (36.45)
2.175 (55.24)
2.175 (55.24)
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.30)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.460 (11.68)
.460 (11.68)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.303 (7.70)
.303 (7.70)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.355 (9.02)
.550 (12.70)
.550 (12.70)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.686 (17.42)
.686 (17.75)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D PCB - .050" Contact Spacing MDM-PCB
BR (Board Right Angle) Series
20
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
.300
(7.62)
PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)
Identification number shown for plug connector, use reverse order for socket connector.
.109 ± .015
(2.77 ± 0.38)
A
C
EG
.186 (4.72)
MAX. PLUG
.198 (5.05)
MAX.
.100
(2.54)
TYP.
B
D
JACKPOST
#2-56 UNC-2B TYP.
.125 ± .015
(3.18 ± 0.38)
F
.150 ± .010
(3.8 ± 0.25)
.096 ± .005
(2.44 ± 0.31)
.050
(1.27)
TYP.
.100 TYP.
CAV.
#1
LAST
CAV.
6789
12345
9 10 11 12 13 14 15
1 2 3 4 5 6 7 8
12 13 14 15 16 17 18 19 20 21
1234567891011
14 15 16 17 18 19 20 21 22 23 24 25
1 2 3 4 5 6 7 8 9 10 11 12 13
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .150
(3.81)
.050
(1.27)
.150
(3.81)
.150
(3.81)
.150
(3.81)
.150
(3.81)
.150
(3.81)
.175
(4.45)
.150
(3.81)
.375
(9.53)
.150
(3.81) .150
(3.81)
.225
(5.72)
9 Contacts
31 Contacts
15 Contacts
37 Contacts 51 Contacts
21 Contacts 25 Contacts
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
.150
(3.81)
.050
(1.27)
100 Contacts
NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped.
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
Part Number
By Shell Size
MDM-9PBR*
MDM-9SBR*
MDM-15PBR*
MDM-15SBR*
MDM-21PBR*
MDM-21SBR*
MDM-25PBR*
MDM-25SBR*
MDM-31PBR*
MDM-31SBR*
MDM-37PBR*
MDM-37SBR*
MDM-51PBR*
MDM-51SBR*
MDM-100PBR*
MDM-100SBR*
1.390 (35.31)
1.390 (35.31)
1.540 (39.12)
1.540 (39.12)
1.690 (42.93)
1.690 (42.93)
1.790 (45.47)
1.790 (45.47)
2.040 (51.82)
2.040 (51.52)
2.340 (59.44)
2.340 (59.44)
1.875 (47.63)
1.875 (47.63)
2.74 (69.72)
2.74 (69.72)
1.150 (29.21)
1.150 (29.21)
1.300 (33.02)
1.300 (33.02)
1.450 (36.83)
1.450 (36.83)
1.550 (39.37)
1.550 (39.37)
1.800 (45.72)
1.800 (45.72)
2.100 (53.34)
2.100 (53.34)
1.600 (40.64)
1.600 (40.64)
2.500 (63.50)
2.500 (63.50)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.10)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.565 (14.35)
.565 (14.35)
.755 (19.18)
.755 (19.18)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.394 (10.01)
.394 (10.01)
A
Max.
B
± .007 (.18)
C
± .005 (.13)
D
Max.
E
Max.
F
Max.
G
Max.
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).
Micro-D PCB - .050" Contact Spacing MDM-PCB
CBR (Condensed Board Right Angle) Series
21
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
+ +
PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)
Identification number shown for plug connector, use reverse order for socket connector.
542 1
13572410121416
1719212325272930
182022262831
24689111315 1357
24
10121416
1719
21232527
29
30323436
18
20222628
31333537
2468
9
111315
1357
24
10121416
17
19
212325
27
29 46 43 41
303234
363738394044
45 42
4748495051
18
20222628
313335
2468
9
111315 1357
24 10121416
17
19
212325
27
29
37
39414345474951
283032343638404244464850
535557596163656769717375
525456586062646668707274
767880828486889092949698100
777981838587899193959799
18202226
313335
2468
9
111315
98 3 76
2457
861231
9
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
17
17
14
14
21 212325
20
20
2224
19
19
18
18
16
16
15
15
13
13
12
12
1011131415
.083
(2.11)
LAST
CAV.
.109 ± .015
(2.77 ± 0.38)
JACKPOST 2-56
UNC-2B TYP.
(Size 9-51)
.186 (4.72)
MAX.PLUG
.198 (5.03)
MAX. RECEPT.
.096 ± .005
(2.44 ± 0.31)
DIA.TYP.
(Size 9-51)
SEE
VIEW X SEE
VIEW Y
SEE
VIEW W
G
* *
F
H
FOR 31: 1.085(27.56) MAX.
FOR 37: 1.185(30.10) MAX.
FOR 51: 1.225(31.12) MAX.
* *
.125 ± .005
(3.18 ± 0.31)
DIA. TYP.
.185
(4.70)MAX. C
H
JACKPOST
#4-40 UNC 2B TYP.
G
F
1.815 (46.10) MAX.
100 VIEW
CAV.
#1
A
C
DE
B
H
G
F
.020
(0.51)
.158 (4.00)
.020
(0.51)
.020
(0.51)
.183
(4.65)
.108
(2.73)
.050
(1.27)
.108
(2.73)
.100 (2.54)
TYP.
.050 (1.27)
TYP.
.020
(0.51)
.083
(2.11)
.020
(0.51)
.083 (2.11)
.020
(0.51)
.325 (8.26) .275 (6.98)
.100 ± .005
(2.54 ± 0.13)
9 Contacts
View X
15 Contacts
View X
21 Contacts
View X
25 Contacts
View X
100 Contacts
View W
51 Contacts
View Y
37 Contacts
View Y
31 Contacts
View Y
NOTE: Standard lead termination is #24 AWG, solid copper,
solder or tin dripped.
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
Part Number
By Shell Size
MDM-9PCBR*
MDM-9SCBR*
MDM-15PCBR*
MDM-15SCBR*
MDM-21PCBR*
MDM-21SCBR*
MDM-25PCBR*
MDM-25SCBR*
MDM-31PCBR*
MDM-31SCBR*
MDM-37PCBR*
MDM-37SCBR*
MDM-51PCBR*
MDM-51SCBR*
MDM-100PCBR*
MDM-100SCBR*
.785 (19.94)
.785 (19.94)
.935 (23.75)
.935 (23.75)
1.085 (27.56)
1.085 (27.56)
1.185 (30.10)
1.185 (30.10)
1.335 (33.91)
1.335 (33.91)
1.485 (37.72)
1.485 (37.72)
1.435 (36.45)
1.435 (36.45)
2.170 (55.12)
2.170 (55.12)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.10)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.394 (10.01)
.394 (10.01)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.184 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.520 (13.21)
.520 (13.21)
.520 (13.21)
.520 (13.21)
.650 (16.15)
.650 (16.15)
1.000 (25.40)
1.000 (25.40)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.300 (7.62)
.300 (7.62)
.400 (10.16)
.400 (10.16)
.230 (5.81)
.230 (5.81)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.150 (3.81)
.150 (3.81)
.200 (5.08)
.200 (5.08)
A
Max. B
± .005 (.13) G
± .010 (.25) H
± .010 (.25)
C
Max. D
Max. E
Max. F
Max.
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).
Micro-D Coaxial/Power - .050" Contact Spacing MDM C/P
Coaxial Contacts
22
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
MDM Power
The same insulator that is used with coaxial contacts is
available with power contacts. This offers the versatility of
combining power and signal lines in the same connector.
MDM Coaxial/Power
Power and coaxial contacts can be interchanged as
desired. Power contacts are rated at 13 amps, 24V rms,
AWG #16 stranded.
MDM Coaxial
The MDM Metal Shell Connectors have been
tooled in several coaxial layouts and offer the
versatility of combining coaxial and signal lines
in the same connector. Any modifications to
these layouts or new requirements, please con-
sult the factory. Standard coax is RG178 white.
++
++ ++
++
7C2/7P2
Plug
308 (7.82)
MAX
1.185 (30.10) MAX.
1.435 (36.45) MAX.
1.215 ± .005
(30.86 ± 0.13)
1.435 (36.45) MAX.
1.215 ± .005
(30.86 ± 0.13)
.351 (8.92)
MAX. .351 (8.92)
MAX.
.091 ± .003
(2.31 ± 0.08)DIA. .091 ± .003
(2.31 ± 0.08)DIA.
.091 ± .003
(2.31 ± 0.08)
.965 ± .005
(24.51 ± 0.13)
.416 (10.57)
MAX.
.416 (10.51)
MAX.
.186 (4.92) MAX.
.186 (4.92)
MAX.
.100
(2.54)
MAX.
.100
(2.54)
MAX.
.800
(20.32)
MAX.
1.050
(26.67)
MAX.
.308 (7.82) MAX.
1.185 (30.10) MAX. .199 (5.05) MAX.
.199 (5.05)
MAX.
.429 (10.90)
MAX.
.429 (10.90)
MAX.
.100
(2.54)
MAX.
.100
(2.54)
MAX. 1.050
(26.67)
MAX.
.800
(20.32)
MAX.
.965 ± .005
(24.51 ± 0.13)
.091 ± .003
(2.31 ± 0.08) DIA.
DIA.
Plug
Receptacle
Receptacle
24C4/24P4
Plug Receptacle
Power Contacts
BACK POTTING
REQUIRED
.350 (8.89)
MAX.
Plug
Receptacle
How to Order
For 83513-Style ordering information see pages 16 and 17
SERIES
RoHS COMPLIANCE
MDM 51 P H 001 P XXX- -
SERIES
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODE
TERMINATION CODE*
HARDWARE
MDM: (Size 9-100) Liquid Crystal Polymer (LCP)
MDM: (Combo Layout) Diallyl Phthalate (DAP)
(H) 001 - 18",7/34 strand,#26 AWG,
MIL-W-16878/4, Type E Teflon, yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681 System I.
M - Military specification hardware, see
page 11 for military hardware codes.
P - Jackpost
K - Jackscrew-standard profile
L - Jackscrew-low profile
F - Float mount
B - No hardware standard
.091 (2.31) dia. hole for sizes 9-51;
.120 (3.05) dia. hole for size 100.
A - .125 (3.18) dia. mounting holes for sizes 9-51;
.166 (4.22) dia. hole for size 100.
B1 - .1475 (3.75) dia. hole for size 100
(Per 83513-Style)
No Number - (Standard cadmium/yellow
chromate over nickel
A174 - Electroless nickel
A172 - Gold over nickel
A141 - Irridite/alodine
A30 - Black anodize
*See page 79 and 81 for additional Termination codes.
9-15-21-25-31-37-51-100 (standard)
16C5, 10C10, 7C2, 24C4 (coaxial)
16P5, 10P10, 7P2, 24P4 (power)
P - Pin S - Socket
H - Harness-insulated wire.
L - Solid-uninsulated wire.
S - Solder pot to accept #26 AWG MAX.
harness wire. (Not available with power
contact arrangements.)
or combination of
coax and power
SHELL FINISH MOD CODES
HARDWARE
SHELL FINISH MOD CODES
}
(L) 1 - 1/2" uninsulated solid #25
AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG
gold plated copper.
R
Microminiature Connectors Hermetic-MDMH
23
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
MDMH connectors are ideal for applications
requiring a better seal than can be achieved
with epoxy resins.
The connector utilizes size 24 AWG contacts
that are compression glass sealed through a
steel shell and into a diallyl pthalate front end
insulator. An interfacial seal provides
environmental protection when mated. We
recommend MDMH receptacles be soldered
to the chassis or container for a completely
leak-proof joint.
MDMH receptacles mate with standard MDM
plugs.
Features
Hermetically sealed connector designed for
those applications where a vacuum, inert
gas or a constant controlled pressure are
required to eliminate adverse effects creat-
ed by atmospheric changes.
Steel shells to provide greater strength, pre-
vent chipping, cracking or breaking, offer
electro-magnetic (EMI) and RFI shielding.
Silicone elastomer compression interfacial
seal to provide a moisture and humidity
seal between each contact and between
contacts and shell.
Specifications
Standard materials & finishes
Shell Mild steel, tin-lead plated
Insulator Glass filled diallyl phthalate per MIL-M-14. Type SDGF
Contacts Copper alloy, gold plated sockets on mild steel gold plated pins. Solder pots - mild steel gold plated
Hermetic seal Compression glass
Leak rate 1 micron cubic ft/hr max (1.04 x 10-5 cc/sec at 1 ATM pressure differential)
ELECTRICAL DATA
No. of contacts 9to 100
Dielectric withstanding voltage 150 VAC
Insulation resistance 5000 Mohm minimum
Wiresize #26 through #30 AWG
Contact termination Solder pot
MECHANICAL FEATURES
Size or length 8sizes
Service class Hermetically sealed
Coupling Friction/jacks
Polarization Keystone shaped shells
Contact spacing .050 (1,27) centers
Shell style Receptacle, solder mount
How to Order
MDMH – 51 S S
Hermetic Micro D Receptacle Series
Contact layout
Socket Contacts (only)
Termination type
9, 15, 21, 25, 31, 37, 51, 100
Microminiature Connectors Hermetic-MDMH
24
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
A
B
F
E
G
6,61
(.260)
MAX
4,58
(.180)
MAX
D
5,06 (.199)MAX
1,93
(.076)
MAX
C
2 HOLES 2-56 UNC (9-51 WAY)
4-40 UNC (100 WAY)
Face vew of socket insert - use reverse order for wiring side.
9 Contacts
54321
9876
8 7 6 5 4 3 2 1
15 14 1 3 12 11 10 9
15 Contacts
11 10 9 8 7 6 5 4 3 2 1
21 20 19 18 17 16 15 14 13 12
21 Contacts
37 Contacts 31 Contacts
13 12 11 10 98 7 6 5 4 3 2 1
25 24 23 22 21 20 19 18 17 16 15 14
25 Contacts
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
51 Contacts
12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
100 Contacts
Contact identification numbers a re for refe rence only and do not appear on insulator or connector bod y.
35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
16 15 14 13 12 11 10 98 7 6 5 4 3 2 1
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
Contact Arrangements
Part Number A B C D E F G
by shell size max max max max max ±.005 (0,13) max
MDMH-9S .885 (22,48) .738 (18,74) .400 (10,16) .270 (6,86) .430 (10,92) .565 (14,35) .261 (6,63)
MDMH-15S 1.035 (26,29) .888 (22,55) .550 (13,97) .270 (6,86) .430 (10,92) .715 (18,16) .261 (6,63)
MDMH-21S 1.185 (30,10) 1.038 (26,36) .770 (17,78) .270 (6,86) .430 (10,92) .865 (21,97) .261 (6,63)
MDMH-25S 1.285 (32,64) 1.137 (28,87) .800 (20,32) .270 (6,86) .430 (10,92) .965 (24,51) .261 (6,63)
MDMH-31S 1.435 (36,45) 1.288 (32,72) .950 (24,13) .270 (6,86 .430 (10,92) 1.115 (28,32) .261 (6,63)
MDMH-37S 1.585 (40,26) 1.438 (36,53) 1.100 (27,94) .270 (6,86) .430 (10,92) 1.265 (32,13) .261 (6,63)
MDMH-51S 1.535 (38,99) 1.388 (35,26) 1.050 (26,67) .310 (8,00) .473 (12,01) 1.215 (30,86) .315 (8,00)
MDMH-100S 2.275 (57,78) 2.078 (52,78) 1.455 (36,97) .365 (9,27) .522 (13,26) 1.800 (45,72) .410 (10,41)
Shell Dimensions
Microminiature Connectors Filter-TMDM
25
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
With an increasing number of MDM connec-
tors being used in avionics and military equip-
ment and with increasing emphasis being put
on EMI, RFI and EMP shielding, Cannon have
developed a range of filter connectors to suit
most applications.
The TMDM receptacle accommodates from 8
to 37 sizes, 24 AWG socket contacts on 1,27
(.050) centres and mates with the standard
MDM plugs.
Features
Transverse monolith filter for EMI and RFI
shielding.
Rugged aluminum one piece shell.
Silicone interfacial environmental seal.
Glass filled diallyl phthalate insulator.
A variety of filter types for each pin.
Specifications
Standard materials & finishes
Shell Aluminum alloy per QQ-A-200/8 with electroless nickel finish per QQ-N-290
Insulator Glass filled diallyl phthalate per MIL-M-14. Type SDGF
Contact, socket Copper alloy, 50 microinch gold per MIL-G-45204, Type ll, Class l
Interfacial seal Silicone base rubber
ELECTRICAL DATA
No. of contacts 9 to 37
Dielectric withstanding voltage 300 VAC
Insulation resistance 5000 Mohm at 100 VDC
Voltage rating (working) 100 VDC
Current rating 3 amps max.
Maximum capacitance 250, 500, 1000, 2000 picofarads
Filter type C
MECHANICAL FEATURES
Size or length 6 sizes
Coupling Friction/jackscrews
Polarization Keystone shaped shell
Contact spacing .050 (1,27) centers
Shell style Single piece receptacle
How to Order
TMDM – C1 15 S H 001 B- *
Series
Filter type
Number of contacts
Contact style
Termination type
Termination/modifier code
Mounting code
Modification code
Series:
Filter TMDM - Micro “D” - Metal housing
Filter type:
“C” capacitor type
C1 150 - 250 pF capacitance
C2 300 - 500 pF capacitance
C3 700 - 1000 pF capacitance
C4 1300 - 2000 pF capacitance
Number of contacts:
9, 15, 21, 25, 31, 37 only
Contact style:
S-socket (receptacle)
P - Pin (plug)
Termination type:
H-harness, insulated solid or stranded wire
L-lead, solid uninsulated wire
Termination:
Consult standard wire termination code for lead
material and lead length
Mounting code:
A - Flange mounting, Ø.125 (3,18)
mounting holes
B - Flange mounting, Ø.092 (2,34)
mounting holes
L-Low profile (slotted head)
M2 - Allen head jackscrew assembly,
low profile
M3 - Allen head jackscrew assembly,
high profile
M5 - Slot head jackscrew assembly,
low profile
M6- Slot head jackscrew assembly,
high profile
M7 - Jacknut assembly
P - Jackpost
Modification code:
Shell finish MOD. Codes. *
Tobe assigned as required
*No number = Standard tin/lead finish
Microminiature Connectors Filter-TMDM
Standard Wire Termination Codes
26
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Guaranteed Minimum Attenuation
Filter Capacitance Minimum Insertion Loss-decibels
designation range (pF) 10 MHz 15 MHz 30 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz
C1 150 - 250 4 6 15 20 35
C2 300 - 500 3 6 12 18 25 40
C3 700 - 1000 3 7 13 17 25 38 48
C4 1300 - 2000 5 8 13 18 23 30 40 50
Harness Type (H) #26 AWG per
MIL-W-16878/4 Type E Teflon, stranded
Length All Yellow Color Coded
3(76.2) H020 H027
6 (152.4) H019 H016
8 (203.2) H026 H034
10 (254.0) H029 H025
12 (304.8) H028 H002
18 (457.2) H001 H003
20 (508.0) H038 H023
24 (509.6) H009 H004
30 (762.0) H010 H005
36 (914.4) H011 H006
48 (1219.2) H013 H048
72 (1828.8) H017 H046
120 (3048.0) H042 H041
Solid Uninsulated Type (L)
#25 AWG gold plated copper.
Code Length
L61 .125 (.18)
L56 .150 (3.81)
L57 .190 (4.83)
L39 .250 (5.35)
L58 .375 (9.52)
L1 .500 (12.70)
L14 .750 (19.05)
L2 1.000 (25.40)
L7 1.500 (38.10)
L6 2.000 (50.80)
L6 2.500 (63.50)
L10 3.000 (76.20)
Shell Dimensions
*.750 max for pre-wired versions (H modifier above)
Part Number A B C D E F max G
by shell size max max max max max ±0,13 (.005) max
MDMT
-9S* .785 (19,94) .400 (10,16) .400 (10,16) .270 (6,86) .308 (7,83) .565 (14,36) .251 (6,38)
MDMT
-15S* .935 (23,75) .550 (13,97) .550 (13,97) .270 (6,86) .308 (7,83) .715 (18,17) .251 (6,38)
MDMT
-21S* 1.085 (27,60) .700 (17,78) .700 (17,78) .270 (6,86) .308 (7,83) .865 (21,98) .251 (6,38)
MDMT
-25S* 1.185 (30,10) .800 (20,32) .800 (20,32) .270 (6,86) .308 (7,83) .965 (24,52) .251 (6,38)
MDMT
-31S* 1.335 (33,90) .950 (24,13) .950 (24,13) .270 (6,86) .308 (7,83) 1.115 (28,30) .251 (6,38)
MDMT
-37S* 1.485 (37,70) 1.100 (28,00) 1.100 (28,00) .270 (6,86) .308 (7,83) 1.265 (32,20) .251 (6,38)
Cannon Modification Codes – (Not Mil Spec)
The following termination codes are listed for your information. For additional codes
please refer to Appendix on page 79 and 81. All wire lengths are minimum.
5,06
(.199)
MAX
7,60
(.299)
MAX
10,90
(.500)*
MAX
E
A
B
F
C
2HOLES
Ø2,32 (.091)
±0,08(.003)
G
D
Microminiature Connectors Filter-TMDM
27
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Typical Filter Performance
1300-2000 pF
700-1000 pF
300-500 pF
150-250pF
FREQUENCY (MHz)
ATTENUATION (dB)
70
60
50
40
30
20
10
0
110 1001000
PCB ordering information - page 30
SERIES-INSULATOR STYLE-MATERIAL
SERIES-INSULATOR STYLE-MATERIAL
MDB - Screw mounting-Diallyl phthalate
MDVB - Screw mounting-Polyester
H - Insulated solid or stranded wire
L - Uninsulated solid wire
S - Solder pot to accept #26 AWG max.
harness wire.
No designator - No hardware - standard mounting
.091 (2.31) hole diameter
P - Jackpost
K - Jackscrew-standard
L - Jackscrew-low profile
F - Float mount
M - Military specification hardware, see page 13.
1 - .050 (1.27) centers
9-15-21-25-31-37-51. See page 9
P - Pin S - Socket
CONTACT SPACING
CONTACT ARRANGEMENT
CONTACT TYPE
CONTACT SPACING
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
TERMINATION TYPE LOCKING HARDWARE (SCREWMOUNTINGONLY)
TERMINATION CODE
LOCKING HARDWARE
MD** 1-9PH001P
(H) 001 - 18", 7/34strand, #26 AWG,
MIL-W-16878/4,Type E Teflon, Yellow.
(H) 003 - 18", 7/34strand, #26 AWG,
MIL-W-16878/4,Type E Teflon, color
coded to MIL-STD-681 System I.
(L) 1 - 1/2"uninsulated solid #25 AWG gold plated copper.
(L) 2 - 1"uninsulated solid #25 AWG gold plated copper.
TERMINATION CODE
RoHS COMPLIANCE
R
See page 79 and 81for additional codes
28
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D Plastic Shell - .050" Contact Spacing MD**
How to Order
Microminiature Rectangular Connectors
with MICRO-Pin Contacts on .050 (1.27)
centers.
MICRO-D microminiature rack/panel connec-
tors are used in applications requiring highly
reliable, extremely small, lightweight connec-
tors. These connectors are available in 2 insu-
lator materials, 2 mounting variations, 7 shell
sizes accommodating from 9 to 51 contacts
and a special arrangement of 5 micro contacts
and 2 coaxials. The insulator materials listed
give the MICRO-D connector wide versatility
in most applications required by industry.
ITT can also terminate a wide variety of
stranded or solid wire directly to MICRO-D
contacts, which is often desirable in high den-
sity arrangements.
MICRO-D connectors can also be custom har-
nessed to meet any customer requirement of
single or multiple connectors. Pigtail lead and
harness description must be given by the cus-
tomer. A typical description would be: .5" #25
AWG, gold plated copper leads or 18" of #26
yellow, Teflon-insulated, Type E wire. Shown
below are various methods of termination.
Consult customer service for any routine or
complex harnessing of MICRO-D connectors.
Glass-filled diallyl phthalate thermoset
material used in high temperature applica-
tions that is immune to cleaning solvents.
It also has excellent dielectric properties.
Temperature range: -65˚F to +300˚F
(-55˚C to +149˚C).
Glass-filled polyester thermoplastic that is
not affected by cleaning solvents and
exhibits excellent dielectric properties.
Temperature range: -55˚F to +257˚F
(-65˚C to +125˚C).
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Specifications
MATERIALS AND FINISHES
Shell/Insulator (One Piece) MD/MDB: Glass-filled
thermoset plastic
MDV/MDVB:
Thermoplastic
ELECTRICAL DATA
MECHANICAL FEATURES
No of Contacts
Size or Length
Coupling
Polarization
Contact Spacing
Centers
Shell Styles
Consult factory for availabilty.
Coaxial Cable
Wire Size
Contact Termination
- 9 to 51: (1 arrangement of 5
contacts and 2 coaxials - for
screw mount only)
- 7 sizes
-Friction/jackscrews
-Keystone-shaped shells
-.050 (1.27mm)
- Plug and receptacle
- RG-178/U (Not available for
MD clip mount)
- #24 thru #32 AWG
- Multi-indent crimp
-Copper alloy, gold plate
Contacts
29
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Standard Wire Termination Codes
Cavity #1 black*
The following termination codes are listed for your information. For additional codes please refer to Appendix
on page 79 and 81. All wire lengths are minimum.
#26 AWG per MIL-W-16878 Type ETeflon,stranded.
Harness Typ e(H)
Length
3 (76.2)
6(152.4)
8(203.2)
10 (254.0)
12(304.8)
18 (457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36(914.4)
48(1219.2)
72(1828.8)
120 (3048.0)
H020
H019
H026
H029
H028
H001
H038
H009
H010
H011
H013
H017
H042
H027
H016
H034
H025
H002
H003
H023
H004
H005
H006
H048
H046
H041
L61
L56
L57
L39
L58
L1
L14
L2
L7
L6
L16
L10
.125 (3.18)
.150 (3.81)
.190 (4.83)
.250 (6.35)
.375 (9.52)
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
All YellowColorCoded* TerminationCodeLength
#25AWG Gold Plated Copper
SolidUninsulatedType(L)
Micro-D Plastic Shell - .050" Contact Spacing MDB/MDVB
With Screw Mounting Holes (Conforms to 83513-Style)
+
++
+
MDB
B
B
C
C
.304 (7.72)
MAX.
.204 (5.18)
MAX.
.185 (4.70)
MAX.
.100 (2.54)
MAX.
.285 (7.24)
MAX.
.375 (9.92)
MAX.
.100 (2.54)
MAX.
.110
(2.79)
MAX.
TWO MTG. HOLES .091 ± .003
(2.31 ± 0.08)
.200
(5.08)
MAX.
.154
(3.91)
MAX.
.200
(5.08)
MAX.
D
D
F
F
A
A
E
E
.395 (10.03)
MAX.
Solder Pot
Solder Pot
Glass-filled Diallyl Phthalate
Plastic Insulator MDVB Glass-filled Polyester
Plastic Insulator
R
Part Number by Shell Size
Add lead type and length, see Part Number Explanation.
Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.
**
***
A
Max. B
Max. C
Max. D
Max. E
Max. F
±.005
Avg.
Weight***
±5% (oz.)
±5% (gm.)
MDB1-9P**
MDB1-9S**
MDB1-15P**
MDB1-15S**
MDB1-21P**
MDB1-21S**
MDB1-25P**
MDB1-25S**
MDB1-31P**
MDB1-31S**
MDB1-37P**
MDB1-37S**
MDB1-51P**
MDB1-51S**
MDVB1-9P**
MDVB1-9S**
MDVB1-15p**
MDVB1-15S**
MDVB1-21P**
MDVB1-21S**
MDVB1-25P**
MDVB1-25S**
MDVB1-31P**
MDVB1-31S**
MDVB1-37P**
MDVB1-37S**
MDVB1-51P**
MDVB1-51S**
.788 (20.02)
.788 (20.02)
.938 (23.82)
.938 (23.82)
1.088 (27.64)
1.088 (27.64)
1.188 (30.18)
1.188 (30.18)
1.338 (33.98)
1.338 (33.98)
1.488 (37.80)
1.488 (37.80)
1.438 (36.52)
1.438 (36.52)
.292 (7.42)
.380 (9.65)
.442 (11.23)
.530 (13.46)
.592 (15.04)
.680 (17.27)
.692 (17.58)
.780 (19.81)
.842 (21.39)
.930 (23.62)
.992 (25.20)
1.080 (27.43)
.942 (23.93)
1.030 (26.16)
.408 (10.36)
.408 (10.36)
.588 (14.17)
.588 (14.17)
.708 (17.98)
.708 (17.98)
.808 (20.56)
.808 (20.56)
.958 (24.33)
.958 (24.33)
1.108 (28.14)
1.108 (28.14)
1.058 (26.87)
1.058 (26.87)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.220 (5.59)
.220 (5.59)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.260 (6.60)
.260 (6.60)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (38.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
.026 (0.73)
.025 (0.70)
.038 (1.10)
.035 (1.00)
.053 (1.50)
.050 (1.40)
.063 (1.80)
.056 (1.60)
.080 (2.30)
.073 (2.10)
.086 (2.45)
.076 (2.15)
.109 (3.10)
.093 (2.64)
30
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB
MD*B-PCB connectors use standard MD*B all
plastic shells and are designed for use with
flex circuitry, printed circuit and multi-layer
boards. They are easily mounted and soldered
and provide high density/high reliability in
board-to-board and board-to-cable applica-
tions. While being similar to the MDM-PCB
connectors, the MD*B-PCB connectors are all
plastic, extremely small, and lightweight yet
rugged enough for use in the most demanding
applications.
MD*B-PCB connectors are available in
seven shell sizes with 9 to 51 contacts in the
popular 90° narrow profile PCB termination,
with a variety of tail lengths for varying board
thickness.
How to Order
SERIES
CONTACT ARRANGEMENT
CONTACT TYPE
C
TERMINATION TYPE
T
HARDWARE
H
TERMINATION TAIL LENGTH
T
MODIFICATION CODES
C
(Consult Factory)
M
MD*B - -37 S CBR * * * *L39
RoHS COMPLIANCE
R
Jackpost mounting for use with locking hard-
ware is also available.
If the connectors shown in the catalog do
not meet the requirements of your applica-
tions, a special shape, size or layout using
the basic all plastic shell can be made avail-
able. For further technical and applications
information, contact customer service.
CONNECTOR SERIES
MDVB, MDB
CONNECTOR ARRANGEMENT
9, 15, 21, 25, 31, 51
CONTACT TYPE
S=Socket
P=Pin
TERMINATION TYPE
CBR = 90° Narrow Profile PCB Terminations
HARDWARE
P = Jackpost
M7 = Jackposts, M635135-07
No Letter = Less Hardware
TERMINATION TAIL LENGTH CODES
NONE .109 (2.77) ± 0.15 (0.38) Standard
L61 – .125 (3.18)
L66 – .150 (3.81)
L57 – .190 (4.83)
L39 .250 (6.35)
L58 – .375 (9.52)
31
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB
CBR Series (90˚ Mounting Narrow Profile)
+ +
542 1
13572410121416
1719212325272930
182022262831
24689111315
1357
24
10121416
1719
21232527
29
30323436
18
20222628
31333537
2468
9
111315
1357
24
10121416
17
19
212325
27
29 46 43 41
303234
363738394044
45 42
4748495051
18
20222628
313335
2468
9
111315
98 3 76
2457
861231
9
11
22
33
4
4
5
5
66
77
88
99
10 10
11
11
17 17
14
14
21 212325
20 20
2224
19 19
18 18
16 16
15
15
13
13
12
12
1011131415
LAST
CAV A
C
B
D
E
.109 +_ .015
(3.77 +_ 0.38)
CAV.
#1
JACKPOST 2-56 UNC-2B
TYP.
.186 (4.72) PLUG
.199 (5.05) RECEPTACLE
9-15-21-25 VIEW
*FOR 31: 1.085 (27.56) MAX.
FOR 37: 1.185 (30.10) MAX.
FOR 51: 1.225 (31.12) MAX.
.096 +_ .005
(2.44 +_ 0.31) DIA. TYP
G
F
H
G
F
H
*
PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.)
Indentification number shown for plug connector, use reverse order for socket connector.
.083
(2.11)
.020
(0.51)
.158 (4.00)
.020
(0.51) .020
(0.51)
.183
(4.65)
.108
(2.73)
.050
(1.27)
.108
(2.73)
.100 (2.54)
TYP.
.050 (1.27)
TYP.
.020
(0.51)
.083
(2.11)
.020
(0.51)
.083 (2.11)
.020
(0.51)
9Contacts
15 Contacts
21 Contacts 25Contacts
51 Contacts
37 Contacts
31 Contacts
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)
* For jackpost locking add letter "P" or "M7".
NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped.
Part Number
By Shell Size
MD*B-9PCBR*
MD*B-9SCBR*
MD*B-15PCBR*
MD*B-15SCBR*
MD*B-21PCBR*
MD*B-21SCBR*
MD*B-25PCBR*
MD*B-25SCBR*
MD*B-31PCBR*
MD*B-31SCBR*
MD*B-37PCBR*
MD*B-37SCBR
MD*B-51PCBR*
MD*B-51SCBR
.788 (20.01)
.788 (20.01)
.938 (23.82)
.938 (23.82)
1.088 (27.63)
1.088 (27.63)
1.188 (30.17)
1.188 (30.17)
1.338 (33.98)
1.338 (33.98)
1.488 (37.79)
1.488 (37.79)
1.438 (36.52)
1.438 (36.52)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
.292 (7.42)
.375 (9.52)
.442 (11.23)
.525 (13.34)
.592 (15.04)
.675 (17.14)
.692 (17.58)
.775 (19.68)
.842 (21.39)
.925 (23.50)
.994 (25.25)
1.075 (27.30)
.942 (23.93)
1.026 (26.06)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.258 (6.55)
.258 (6.55)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.177 (4.50)
.258 (6.55)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.520 (13.21)
.520 (13.21)
.550 (13.97)
.550 (13.97)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.300 (7.62)
.300 (7.62)
.230 (5.84)
.230 (5.84)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.150 (3.81)
.150 (3.81)
A
Max.
B
± .005 (0.13)
G
± .010 (0.25)
H
± .010 (0.25)
C
Max.
D
Max.
E
Max.
F
Max.
32
www.ittcannon.com
Dimensions shown in inch (mm)
Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial
MDB Coaxial Series with Screw Mounting Holes
MDB connectors with two coaxial and five MICRO-
PINTM /MICROSOCKETTM contacts. Crimp-type coaxial
contacts accommodate RG-178/U cables. A plastic
insertion/extraction tool is supplied with each connec-
tor assembly having removable coaxial assembly.
How to Order - MDB Coaxial
SERIES
MDB 1 -7 C2 * ** *S HK
SERIES
Micro-D Coaxial No Letter - Coaxial assembly
installed and nonremovable
RO - coaxial assembly ordered
serparately
RA - Coaxial shipped assembled
but uninstalled
See Standard Wire Termination
Consult customer service
No letter - No hardware
* Not available with removalbe coax cable type
connectors RO and RA.
standard mounting. 091 (2.31) hole diameter
F - Float
K - Jackscrew (standard)
L - Jackscrew (low profile)
P - Jackpost
Code on page 29. Coaxial cable will be
RG-178U unless otherwise specified; length
will be same as wire modification.
P - Pin
S - Socket
L - Uninsulated, solid wire
H - Insulated, solid or stranded
S -Solder pot*
1 - .050 (1.27) centers
...................7
.....................2
SIGNAL CONTACT SPACING
TOTAL CONTACT CAVITIES
NUMBER OF COAXIALS
SIGNAL CONTACT SPACING
TOTAL CONTACT CAVITIES
NUMBER OF COAXIALS
COAXIAL TYPE
COAXIAL TYPE
SIGNAL CONTACT TYPE
SIGNAL CONTACT TYPE
SIGNAL CONTACT LEAD TYPE
SIGNAL CONTACT LEAD TYPE
SIGNAL CONTACT LEAD LENGTH
SIGNAL CONTACT LEAD LENGTH
MODIFICATION
HARDWARE
MODIFICATION
HARDWARE
RoHS COMPLIANCE
R
How to Order - Coaxial Cable Assemblies
SERIES
MD CC S * * * *
COAXIAL CABLE
CONTACT TYPE
CONTACT TYPE
COAXIAL CABLE TYPE
COAXIAL CABLE TYPE
COAXIAL CABLE LENGTH
COAXIAL CABLE LENGTH
SERIES
MD
P - Pin
(used with socket side connection)
S - Socket
(used with pin type connection)
See Standard Wire Termination
Codes on page 29. Coaxial cable will be
RG-178U unless otherwise specified; length
will be the same as wire modfication.
1 - RG178/U
COAXIAL CABLE
CC
RoHS COMPLIANCE
R
33
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial
Dimension - MDB Coaxial Series
+ +
+ +
Plug
Receptacle
(See page 9 for layouts)
Part Number
by Shell Size
MDB1-7C2P*
MDB1-7C2S*
.510 (12.95)
.602 (15.29)
* Add lead type and length, see Part Number Explanation.
** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials.
.204 (5.18)
.185 (4.70)
.298 (7.57)
.279 (7.09)
.782 (19.86)
.782 (19.86)
.395 (10.03)
.375 (9.52)
.510 (12.95)
.540 (13.72)
.290 (8.30)
.273 (7.80)
A
Max.
B
Max.
C
Max.
E
Max.
E1
Max.
D
+
_ .005 (0.13)
Avg. Weight**
(oz) +_ 5% (gm.)+_ 5%
.190 (4.83) Max.
.190 (4.83) Max.
TWO MTG. HOLES
.091 +_.003 (2.31 +_0.08) DIA.
TWO MTG. HOLES
.091 +_.003 (2.31 +_0.08) DIA.
D
.250 (6.35) MAX.
A
EXTENSION FOR
RO AND RA
COAXES
EXTENSION FOR
ROAND RA
COAXES
.625 (15.88)
MAX.
C
B
E
E1
A
.625 (15.88)
MAX.
C
B
E
E1
.250 (6.35) MAX.
1.000 (25.40) MAX.
D
1.000 (25.40) MAX.
Micro-D Plastic Shell - .050" Contact Spacing MD
Mounting Hardware Views (Sizes 9-51)
.178 ± .005
(4.52 ± 0.13)
This hardware supplied unassembled.
Screw Lock Assembly
90˚ Angle Mounting Bracket
Description
Screw Lock Assembly
Jackpost Kit
322-9500-000
320-9505-000
015-9516-000 .100
(2.54)
.122
(3.10)
.257
(6.53)
.215
(5.46)
015-9516-000
Mounting Bracket, 90˚ Angle-
MD*1
for 9 thru 37 Shell Sizes
MD*1
for 51 Shell Size
NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit
(320-9505-000) consists of 2 assemblies, shipped unassembled.
Part Number
A
± .005 (0.13)
B
Max.
Screw Lock Assembly*
*NOTE: Torque value is 4.0 in/lbs max.
Jackpost - (P)
90˚ Angle Mounting Bracket
.052
(1.32) TYP.
.260
(6.60) MAX.
#2-56
UNC-2B
THD
B
.096 ± .005
(2.44 ± 0.13)DIA.
.093 (2.36)
RECOMMENDED
PANEL THICKNESS
BUSHING
.182 (4.62)
MAX. .688 (17.48)
MAX.
.408 (10.36)
MAX.
RETAINING
CLIP
LOCK
SCREW
MATING
FACE
CONNECTOR
SHOWN FOR
REF. ONLY
#2-56 UNC-2B
.185 (4.70) MAX.
.500
(12.7)
MAX.
PANEL REF.
.232 (5.89) MAX.
#2-56 UNC-2A
.170
(4.32) MAX.
A
.014 +_ .004
(0.36 +_ 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.150 +_ .003
(3.81 +_ .076)
.185 (4.70)
MAX .093
(2.36)
REF.
.090 +_ .0015
(2.29 +_ 0.038)DIA .031 +_ .003
(0.79 +_ 0.08)
MATING
FACE
MATING
FACE
#2-56
UNC-2A
.490
(12.45) MAX
MATING
FACE
CONNECTOR
SHOWN FOR
REF ONLY
HEX HEAD -
.050 (1.27) ACROSS FLATS
.050 (1.27) DEEP (REF)
.155
(3.94) MAX.
PART HAS A .040 (1.02)
MAX. AXIAL FLOAT
#2-56
UNC-2A
Jackscrew - (L) Low Profile
Jackscrew - (K) Standard
Float Mount - (F)
PART HAS A .040 (1.02)
MAX AXIAL FLOAT
CONNECTOR
SHOWN FOR
REF. ONLY
This hardware is factory installed.
Shown here is a cutaway view of the float mount for the MD connector.
The basic shell dimensions are the same for the float mount and the
screw mounting hole configurations. View shown is for standard float
mount front panel mounting. Reverse mounting is available on request.
* NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-2.5 in/lbs
Standard Jackscrew (K)-2.5 in/lbs
34
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D Plastic Shell - .050" Contact Spacing MD
Mounting Hardware to Military Specification (Sizes 9 - 51) PER 83513/5-Style
This hardware supplied unassembled.
#2-56 UNC-2A
THREAD TYP.
.361 (9.17)
MAX.
PLUG (REF. WITH
.092 (2.34) DIA.
MOUNTING HOLES
POTTING WELL (REF.)
.010 (0.25)
TH'K (REF.)
Jackscrew - (L) Low profile *
.062 (1.57)
HEX. (REF.)
.010 (0.25)
TH'K (REF.)
#2-56 UNC-2A
THREAD TYP. PLUG (REF.) WITH
.092 (2.34) DIA.
MOUNTING HOLES
POTTING WELL
(REF.)
Allen head
Optional Head Configuration
Plug and Receptacle
Low and High Profile Jackscrew - (K) High Profile
Slotted Head
Jackpost Assembly
Description
Slotted Head Jackscrew Assy Low Profile
Slotted Head Jackscrew Assy High Profile
Allen Head Jackscrew Assy Low Profile
Allen Head Jackscrew Assy High Profile
Jackpost Assy
-05
-06
-02
-03
-07
M5
M6
M2
M3
M7
320-9508-025
320-9508-027
320-9508-026
320-9508-028
320-9505-033
M83513/5-Style
Mode Code Part Number
.125 (3.18) HEX
#2-56 UNC-2B Thread
.190 (4.83)
+_ .185 (4.70)
.062 (1.57)
± .010 (0.25)
.475 (12.06)
± 0.25 (0.64)
LOCK WASHER
RETAINING NUT
.154 (3.91) HEX. # 2-56 UNC-2A
Thread
Jackpost Bushing (For Rear Panel Mounting)
++
#2-56 UNC
2A THD
#2-56 UNC 2B THD
MATING FACE
.126 (3.20)
.125 (3.18)
DIA.TYP.
27˚/26˚TYP
C
.075 (1.91) + .005 (0.13)
- .000 (0.00)
R TYP.
A
B
.170 (4.32)
.185 (4.70)
.500 (12.7)
.480 (12.19)
A
HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS
3/32 (2.4)
1/16 (1.6)
3/64 (1.2)
1/32 (0.8)
.092/.087 (2.34/2.21)
.061/.056 (2.34/1.42)
.047/.042 (1.19/1.07)
.030/.025 (0.76/0.64)
320-9505-007
320-9505-006
320-9505-005
320-9505-004
9
15
21
25
31
37
51
.379 ( 9.63)
.529 (13.44)
.679 (17.25)
.779 (19.79)
.929 (23.60)
1.079 (27.41)
1.029 (26.14)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.261 (6.63)
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
1.115 (28.32)
1.265 (32.13)
1.215 (30.86)
*2Jackposts, 2 nuts, 2 washers.
Panel
Thickness
A
Dim.
Jackpost Kit
Number* A
+.004 (0.10)
-.000 (0.00)Shell Size
Plug and Receptacle Dimensions
B
+.004 (0.10)
-.000 (0.00)
C
+_.005(0.13)
NOTE: Torque value for jackpost 2.5 in/lbs
Panel Mounting Dimensions
.200 ±.005
(5.08 ±0.13)
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
.395 ±.005
(10.03 ±0.13)
.300 ±.005
(7.62 ±0.13)
35
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
36
www.ittcannon.com
Micro-D Plastic Shell - .050" Contact Spacing MD
Panel Cutouts
++++
Figure 1
Front Mounting
D
TYP.
B
C
A.015 (0.38)R.
MAX.(TYP)
FULL R.
(TYP. )
D
C
C
A
B
.075 (1.91) + .005 (0.13) R TYP
-.000 (0.00)
FULL R. (TYP. )
26˚/27˚TYP
Figure 2
Rear Mounting
.450 ±.002
(11.43 ±0.05)
FULL R.
(TYP. )
.030 (0.76) TYP.
D
PANEL REF.
Figure 3
Edgeboard Mounting
NOTES:
1.
2.
3.
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
.409 (10.39)
.379 ( 9.63)
-
.559 (14.20)
.529 (13.44)
-
.709 (18.00)
.679 (17.25)
-
.809 (20.55)
.779 (19.79)
-
.959 (24.36)
.929 (23.60)
-
1.109 (28.17)
1.079 (27.41)
-
1.059 (26.90)
1.029 (26.14)
-
.172 (4.37)
.219 (5.56)
-
.172 (4.37)
.219 (5.56)
-
.172 (4.37)
.219 (5.56)
-
.172 (4.37)
.219 (5.56)
-
.172 (4.37)
.219 (5.56)
-
.172 (4.37)
.219 (5.56)
-
.215 (5.46)
.261 (6.63)
-
.570 (14.48)
.570 (14.48)
.570 (14.48)
.720 (18.29)
.720 (18.29)
.720 (18.29)
.870 (22.10)
.870 (22.10)
.870 (22.10)
.970 (24.64)
.970 (24.64)
.970 (24.64)
1.120 (28.45)
1.120 (28.45)
1.120 (28.45)
1.270 (32.26)
1.270 (32.26)
1.270 (32.26)
1.220 (30.99)
1.220 (30.99)
1.220 (30.99)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
9
15
21
25
31
37
51
A
+ .004 (0.10)
- .000 (0.00)
B
+ .004 (0.10)
- .000 (0.00)
C
+ .005 (0.13)
- .000 (0.00)
D
+ .005 (0.13)
- .000 (0.00)
Cutout
Figure
Size
Front mounting (figure 1) and rear mounting (figure 2) accommodates #2-56 screws.
Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page.
Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 ± .002 (11.43 ± 0.05) locates the
MD receptacle flush with the end of the board.
Plug MD Glass-filled Diallyl Phthalate
Plastic Insulator MDV Glass-filled Polyester
Plastic Insulator
Solder Pot
Solder Pot
Receptacle
.022 (0.56)
MAX.
.022 (0.56)
MAX.
.093 ± .005
(2.36 ± 0.13)
.093 ± .005
(2.36 ± 0.13)
A
A
E
E
.130
(3.30)
MAX.
.210
(5.33)
.204 (5.18)
MAX.
.185 (4.69)
MAX.
.375 (9.52)
MAX.
.356 (9.04)
MAX.
.065 (1.65)
MAX.
.065 (1.65)
MAX.
.170
(4.32)
.170
(4.32)
MAX.
D
D
B
B
C
C
PCB ordering information - page 30
SERIES-INSULATOR STYLE-MATERIAL
SERIES-INSULATOR STYLE-MATERIAL
MD - Clip mounting -Diallyl phthalate
MDV - Clip mounting-Polyester
H- Insulated solid or stranded wire
L - Uninsulated solid wire
S - Solder pot to accept #26 AWG max.
harness wire.
No designator - No hardware - standard mounting
.091 (2.31) hole diameter
Not available in clip mounting.
See page 79 and 81for additional codes.
*
**
(H) 001 - 18", 7/34strand,#26 AWG,
MIL-W-16878/4, Type E Teflon, Yellow.
(H) 003 - 18", 7/34strand,#26 AWG,
MIL-W-16878/4, Type E Teflon,color
coded to MIL-STD-681 System I.
(L) 1 - 1/2"uninsulated solid #25AWG gold plated copper.
(L) 2 - 1"uninsulated solid #25AWG gold plated copper.
1 - .050 (1.27) centers
9-15-21-25-31*-37-51. See page 7
P- Pin S - Socket
CONTACT SPACING
CONTACT ARRANGEMENT
CONTACT TYPE
CONTACT SPACING
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
TERMINATION TYPE
TERMINATION CODE**
TERMINATION CODE
LOCKING HARDWARE
MD 1-9PH001P
RoHS COMPLIANCE
R
37
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro-D Plastic Shell - .050" Contact Spacing MD/MDV
Part Number by Shell Size
MD1-9P**
MD1-9S**
MD1-15P**
MD1-15S**
MD1-21P**
MD1-21S**
MD1-25P**
MD1-25S**
MD1-37P**
MD1-37S**
MD1-51P**
MD1-51S**
MDV1-9-P**
MDV1-9S**
MDV1-15P**
MDV1-15S**
MDV1-21P**
MDV1-21S**
MDV1-25P**
MDV1-25S**
MDV1-37P**
MDV1-37S**
MDV1-51P**
MDV1-51S**
A
Max.
B
Max.
C
Max.
D
Max.
E
Max.
Avg. Weight***
±5% (oz.)/±5% (gm.)
.512 (13.00)
.512 (13.00)
.662 (16.81)
.662 (16.81)
.812 (20.62)
.812 (20.62)
.912 (23.16)
.912 (23.16)
1.212 (30.78)
1.212 (30.78)
1.162 (29.51)
1.162 (29.51)
Add lead type and length, see Part Number Explanation. Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.
** ***
.292 (7.42)
.376 (9.55)
.442 (11.23)
.526 (13.36)
.592 (15.04)
.676 (17.17)
.692 (17.58)
.776 (19.71)
.992 (25.20)
1.076 (27.33)
.942 (23.93)
1.026 (26.06)
.405 (10.29)
.405 (10.29)
.555 (14.10)
.555 (14.10)
.705 (17.91)
.705 (17.91)
.805 (20.45)
.805 (20.45)
1.105 (28.07)
1.105 (28.07)
1.055 (26.80)
1.055 (26.80)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.213 (5.41)
.213 (5.41)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.258 (6.55)
.258 (6.55)
.026 (0.73)
.026 (0.73)
.038 (1.10)
.035 (1.00)
.053 (1.50)
.050 (1.40)
.063 (1.80)
.056 (1.60)
.086 (2.45)
.076 (2.15)
.109 (3.10)
.093 (2.65)
How to Order
With Clip Mounting Slots
Micro-D Plastic Shell - .050" Contact Spacing MD**
Panel Mounting Hardware
Clip Mounting
Description
Dimensions (Clip Mounting Only)
Coupling Retention Clip
(see Figure 2)
Mounting Screw Brackets
(see Figures 1 and 3)
Panel
Mounting Key
Edgeboard Mounted
(see Figure 4)
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
Part Number
201-9100-000
294-9100-000
015-9100-000
015-5009-000
MD51428-1
Panel Mounting Key
Mounting Key and Coupling Clip Assembly
Mounting Screw Bracket
Edgeboard Mounting Bracket
Edgeboard Mounting Bracket and
Coupling Clip Assembly
Must be ordered separately; specify left and right hand for complete
assembly.
.200 ± .005 (5.08 ± 0.13) .330 ± .005
(8.38 ± 0.13) .265 ± .005 (6.73 ± 0.13)
Must be ordered separately; assembly contains set of left and right
hand types.
*
**
*
**
Illustrated is therecommended method of front mounting
with metal panel mounting keys. Panel mounting keys are
available with or without coupling retention clips.
For front mounting, place therear of theconnector thru
thepanelcutout. With themountingflangeagainst the
panel,fullyinsert the panelmountingkeysthru the slots
in theflange and thruthepanelcutout.Retainingthe
keys in this position, bend them outward against the rear
ofthepanel.Whenmatingafront mountedconnector
withanunmountedconnector, a couplingretention clip
assembly may be used to securely lock the two together.
Mountingscrew brackets are available and may be used
instead of the panel mounting keys.
Panel Cutouts
Figure 1
Figure 3
Rear Mounting
Figure 4
Edgeboard Mounting
Figure 2
Front Mounting
DC
C
A
A
FULL R. (TYP.)
FULL R. (TYP.)
D
.015 (0.38)R.
MAX. (TYP.)
.075 + .005 - .000
(1.91 + 0.13 _ 0.00)
.182 + .004 - .000
(4.62 + 0.10 - 0.00)
PANEL REF.
.018 + .002 - .000
(0.46 + 0.05 - 0.00)
.005 (0.13) MAX.
R. (TYP.)
26˚/27˚ TYP.
.015 (0.38)R.
MAX. (TYP.)
A
A
B
B
B
B
Apanel thickness of 1/8" (3.17mm) maximum is recommended for ease of tab bending
when a panel mounting key & clip assembly or edgeboard mounting brackets are used.
Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for
dimensions.
Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002
(2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board.
Screw brackets (015-9100-000) will accommodate #2-56 screws.
Front mounting(Figure 1) andrearmounting(Figure 3) accommodate#2-56screws.
1.
2.
3.
4.
5.
Shell
Size
9
15
21
25
37
51
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
.408 (10.36)
.408 (10.36)
.378 ( 9.60)
.400 (10.16)
.588 (14.94)
.588 (14.94)
.528 (13.28)
.550 (13.97)
.738 (18.75)
.738 (18.75)
.678 (17.27)
.700 (17.78)
.838 (21.29)
.838 (21.29)
.778 (19.76)
.800 (20.32)
1.138 (28.91)
1.138 (28.91)
1.078 (27.38)
1.100 (27.94)
1.088 (27.64)
1.088 (27.64)
1.028 (26.11)
1.050 (26.67)
.172 (4.37)
.172 (4.37)
.217 (5.51)
.091 (2.31)
.172 (4.37)
.172 (4.37)
.217 (5.51)
.091 (2.31)
.172 (4.37)
.172 (4.37)
.217 (5.51)
.091 (2.31)
.172 (4.37)
.172 (4.37)
.217 (5.51)
.091 (2.31)
.172 (4.37)
.172 (4.37)
.217 (5.51)
.091 (2.31)
.215 (5.46)
.215 (5.46)
.260 (6.60)
.091 (2.31)
.650 (16.51)
-
.650 (16.51)
-
.795 (20.19)
-
.795 (20.19)
-
.945 (24.00)
-
.945 (24.00)
-
1.045 (26.54)
-
1.045 (26.54)
-
1.345 (34.16)
-
1.345 (34.16)
-
1.295 (32.89)
-
1.295 (32.89)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
.089 (2.26)
-
Cutout
Figure
A
+ .004 (0.10)
- .000 (0.00)
B
+ .004 (0.10)
- .000 (0.00)
C
+ .004 (0.10)
- .000 (0.00)
D
+ .005 (0.13)
- .000 (0.00)
38
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
39
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Center Jackscrew MJS
How to Order
The MJS jackscrew series provides a reliable interconnect for board-to-board,
board-to-cable and in-line cable-to-cable applications. Layouts accommodating
up to 76 MICROPIN/MICROSOCKETTM contacts are available, with the same
wide range of options as are offered with the other MICRO Line products offered
in this catalog.
SERIES
INSULATOR MATERIAL
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODES
SERIES CONTACT TYPE TERMINATION CODE*
MJS 26 P H 001* -
TERMINATION TYPE
INSULATOR MATERIAL
B - Diallyl phthalate
V - Polyester
U- Polyetherimide
R - Polyphenylene sulfide
MJS - Micro Center Jackscrew
* See Termination Codes shown below.
P - Pin
S - Socket
(H) 001
(H) 003
(L) 1
(L) 2
- 18" , 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
yellow.
- 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681
System I.
- 1/2" uninsulated solid #25
AWG gold plated copper.
- 1" uninsulated solid #25 AWG
gold plated copper.
H - Insulated wire harness.
I - Integral tail (MJSV-28S only).
L - Solid - uninsulated wire.
S - Solder pot to accept #26 AWG
harness wire.
T - Thru bundle pigtail (MJSV-28P only).
Unshrounded Receptacle: 10, 26, 51, 66
Shrouded Receptacle; 10, 26, 34, 38, 42, 76
Low Profile Plug and Receptacle
(shrouded): 28
CONTACT ARRANGEMENTS
RoHS COMPLIANCE
R
Standard Wire Termination Codes
The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum.
Harness Type (H)
#26 AWG per MIL-W-16878/4 Type ETeflon,7/34 stranded.
Solid UninsulatedType (L)
#25AWG gold plated solid copper.
Length
3(76.2)
6(152.4)
8(203.2)
10 (254.0)
12(304.8)
18 (457.2)
20 (508.0)
H 020
H 019
H 026
H 029
H 028
H 001
H 038
H 027
H 016
H 034
H 025
H 002
H 003
H 023
24 (609.6)
30 (762.0)
36 (914.4)
48(1219.2)
72(1828.8)
120 (3048.0)
H 009
H 010
H 011
H 013
H 017
H 042
H 004
H 005
H 006
H 048
H 046
H 041
L61
L56
L57
L39
L58
L1
L14
L2
L7
L6
L16
L10
.125(3.18)
.150 (3.81)
.190 (4.83)
.250 (6.35)
.375(9.53)
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
All YellowColorCodedLength Termination
CodeLength
Termination
CodeLength
All YellowColorCoded
Contact Arrangements
Face view of pin-use reverse order for socket
Identification numbers are for reference only and do not appear on connectors. *Low profile configuration
**MJSV & MJSR
10 Contacts
4
6
10
17
34
51
1
18
35
21
44
66
1
23
45
12
14
26
1
13
15
1
7
11
1
13
23
12
22
34
6
10
16
1
11
19
10
18
28
1
5
7
26 Contacts 16 Contacts** 28 Contacts**
34 Contacts
MJSV (shrouded)
66 Contacts
MJSB/MJSU (unshrouded)
51 Contacts
Micro Center Jackscrew MJS
Unshrouded Receptacle (10-26-51-66)
40
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
MJSB/MJSU
Rear View
UNSHROUDED
STANDARD MATERIALS AND FINISHES
Micropin
Microsocket
Insulator
Copper alloy, 50 miro-inch gold
Copper alloy, 50 micro-inch gold
Stainless steel, passivated & lubricated
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Diallyl phthalate, green color
or polyetherimide, natural color
Jackscrew
Retainer, Jackscrew
Insert, Threaded
Post, Polarizing
.145 (3.68)
DIA.
MAX.
A
.055 (1.40) TYP.
C
B
.050 (1.27) TYP.
Part Number
MJSB or MJSU-10P
MJSB or MJSU-10S
MJSB or MJSU-26P
MJSB or MJSU-26S
MJSB or MJSU-51P
MJSB or MJSU-51S
MJSB or MJSU-66P
MJSB or MJSU-66S
.378 (9.60)
.378 (9.60)
.778 (19.76)
.778 (19.76)
1.028 (26.11)
1.028 (26.11)
1.280 (32.51)
1.280 (32.51)
.190 (4.83)
.190 (4.83)
.190 (4.83)
.190 (4.83)
.260 (6.60)
.260 (6.60)
.260 (6.60)
.260 (6.60)
.290 (7.37)
.290 (7.37)
.690 (17.53)
.690 (17.53)
.940 (23.88)
.940 (23.88)
1.190 (30.23)
1.190 (30.23)
A
Max.
B
Max.
C
Bsc.
.126 ± .005
(3.20 ± 0.13)
.170 ± .010 (4.32 ± 0.25)
1-64 UNC-2A
THREAD
.170 (4.32)
MAX.
.110 MAX.
(2.79)
1-64 UNC-2B
THREAD
.332 (8.43)
MAX.
POLARIZING PIN (OPTIONAL WITH LOSS OF CONTACT)
Receptacle Plug
Shrouded Receptacle (16-28*-34)
MJSV/MJSR
A
A
.285 (7.24)
MAX.
C
C
.080 (2.03)
.065 (1.65)
.285 (7.24) MAX. B
B
D
1-64 UNC-2B
THREAD
1-64 UNC-2A
THREAD
.205 (5.21) MAX.
.090 ± .010
(2.29 ± 0.25)
.110 (2.79) MAX.
.145
(3.68)
DIA. MAX.
Face View
Face View Receptacle
Plug
SHROUDED
STANDARD MATERIALS AND FINISHES
Micropin
Microsocket
Insulator
Copper alloy, 50 miro-inch gold
Copper alloy, 50 micro-inch gold
Part Number
MJSV or MJSR-16P
MJSV or MJSR-16S
MJSV-28P* or MJSR-28P*
MJSV-28S* or MJSR-28S*
MJSV-34P or MJSR-34P
MJSV-34S or MJSR-34S
.700 (17.78)
.700 (17.78)
1.020 (25.91)
1.020 (25.91)
1.180 (29.97)
1.180 (29.97)
*Low profile configuration, for "L" (uninsulated solid wire) termination add .090 (2.29) to the "B" dimension.
For "H" (insulated wire) termination add .200 (5.08) to the "B" dimension. For special configurations
with backpotted standoffs consult factory.
.345 (8.76)
.320 (8.13)
.232 (5.89)
.246 (6.25)
.330 (8.38)
.305 (7.75)
.545 (13.84)
.545 (13.84)
.865 (21.97)
.865 (21.97)
1.025 (26.04)
1.025 (26.04)
.175 (4.45)
-
.062 (1.57)
-
.160 (4.06)
-
A
Max.
B
Max.
C
Ref.
D
± .006 (0.15)
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Polyester, black color
Polyphenylene sulfide, black color
Jackscrew
Retainer, Jackscrew
Insert, Threaded
Post, Polarizing
41
www.ittcannon.com
Micro Center Jackscrew MJS
Shrouded Receptacle (42)
+
MJSR-42P A
1.322
(33.58)
REF.
.125
(3.18)
TYP.
CAV. #1
.075
(1.91)
TYP.
#1 (.073) - 64 UNC-2B
THREADED INSERT
.035 (0.89)
.015 (0.38)
TYP.
B
C
D
CAV. #31
.100
(2.54)
TYP.
.297
(7.54)
REF.
.420
(10.67)
MAX.
CAV #42
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
A
1.328
(33.73)
REF.
.125
(3.18)
TYP. .100
(2.54)
TYP.
CAV
# 1
CAV. 42
1/16 SOCKET HEAD JACKSCREW
#1 (.073 - 64 UNC - 2A THREAD
C
.131 (3.33)
.121 (3.07) TYP
B
.145 (3.68)
DIA. MAX. .108
(2.74) MAX.
.075 (1.91)
TYP.
.303
(7.70)
REF.
.420
(10.67)
MAX.
MJSR-42S
Part Number
A
Max.
B
Max.
C
Ref.
D
±.006 (0.15)
MJSR-42P
MJSR-42S
1.445 (36.70)
1.445 (36.70)
.345 (8.76)
.357 (9.07)
1.250 (31.75)
1.250 (31.75)
.142 (3.61)
-
STANDARD MATERIALS AND FINISHES
Micropin
Microsocket
Insulator
Jackscrew
Retainer, Jackscrew
Insert, Threaded
Copper alloy, 50 miro-inch gold
Copper alloy, 50 micro-inch gold
Polyphenylene sulfide, black color
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Center Jackscrew MJS
Shrouded Receptacle (76)
42
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
+
MJSR-76P
#2 (0.86) - 64 UNC-2B
THREADED INSERT
A
1.472
(37.39)
REF.
CAV.
#1
.100 (2.54) TYP.
.075
(1.91)
TYP.
CAV. #76 CAV. #62
C
.447
(11.35)
REF.
.570
(14.48)
MAX.
.035 (0.89)
.015 (0.38)
TYP.
B
D
CAV. #13
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
++ ++
+++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
.570
(14.48)
MAX.
.453
(11.51)
TYP.
.075
(1.91)
TYP.
.100 (2.54)
TYP.
1.478 (37.54) TYP.
CAV. #1
C
A
1/16 SOCKET HEAD JACKSCREW
#2 (.086 - 64 UNC - 2A THREAD .131 (3.33)
.121 (3.07) TYP
B
.160
(4.06)
MAX.
.150 (3.81)
MAX.
MJSR-76S
Part Number
A
Max.
B
Max.
C
Ref.
D
±.006 (0.15)
MJSR-76P
MJSR-76S
1.595 (40.51)
1.595 (40.51)
.345 (8.76)
.357 (9.07)
1.400 (35.56)
1.400 (35.56)
.142 (3.61)
-
CAV. #62 CAV. #76
CAV. #13
STANDARD MATERIALS AND FINISHES
Micropin
Microsocket
Insulator
Jackscrew
Retainer, Jackscrew
Insert, Threaded
Copper alloy, 50 miro-inch gold
Copper alloy, 50 micro-inch gold
Polyphenylene sulfide, black color
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
43
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Center Jackscrew MJS
Plug (Molded-In Insert - Special)
MJSV**P
MJSV-26P**
(Shown)
Part Number
MJSV-26P**
MJSV-38P**
.868 (22.05)
1.168 (29.67)
A
Ref.
.100 (2.54)
INSERT
#1-64 UNC-2B
INSULATOR
A
MAX.
ENGAGING FACE
.300 (7.62)
MAX.
.061 (1.55)
MAX.
.109 (2.77)
MAX. DIA.
LEAD
LENGTH
MICRO-PIN
CONTACT
.162 (4.11)
REF.
CAVITY # 1
Receptacle (Special)
MJSV-26S**
(Shown)
Part Number
MJSV-26S**
MJSV-38S**
.943 (23.95)
1.243 (31.57)
.874 (22.20)
1.174 (29.82)
A
Max.
B
Ref.
.167 (4.24)
REF.
.100 (2.54)
REF.
B
.253 (6.43)
MAX.
.320 (8.13)
MAX.
.155 (3.94)
MAX.
A
MAX.
#1-64 UNC-2A
MICRO-SOCKET
.190 (4.83)
REF.
LEAD
LENGTH
JACKSCREW
MJSV**S*
CAVITY # 1
Contact Arrangements
++
.075 (1.91) .050 (1.27)
.100 (2.54)
14
26
Identification numbers are for reference and do not appear on connectors.
.050 (1.27)
TYP.
26 Contacts
.050 (1.27)
TYP.
.075 (1.91)
.100 (2.54)
REF.
20
38
21
1
1
38 Contacts
15
Face view of pin - use reverse order for socket
Microminiature Circular - .050" Contact Spacing MICRO-K
44
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
MICRO-K microminiature circular connectors
are rugged yet lightweight - and are designed
to be comparable to MIL-DTL-83513.
Applications include biomedical,
instrumentation and miniature black boxes.
MIK: Accommodate up to 55 contacts on .050
(1.27) centers (equivalent to 420 contacts per
square inch). Five keyway polarization prevents
cross plugging. The threaded coupling nuts
provide strong, reliable coupling. MIK recepta-
cles can be either front or back panel mounted;
in back mounting applications, panel thickness
of up to 3/32" can be used on the larger sizes.
Maximum temperature range - 55˚C to + 125˚C.
Standard MIK connectors are available in two
shell sizes accommodating two contact
arrangements pre-wired to your specific
requirements.
MIKM: Similar to our MIK, except has a steel
shell and receptacle for improved ruggedness
and RFI resistance. It accommodates up to 85
twist pin contacts. Maximum temperature
range - 55˚C to + 125˚ C.
MIKQ: Aquick disconnect metal shell and
receptacle version that can be instantaneously
disconnected yet provides a solid lock when
engaged. Applications include commercial TV
cameras, portable
radios, military gun sights, airborne landing
systems and medical equipment. Maximum
temperature range - 55˚C to +125˚C.
Specifications
STANDARD MATERIAL AND FINISHES ELECTRO/MECHANICAL FEATURES
*For plug only
Electrodeposited for receptacle.
MIK
Thermoplastic
Stainless Steel
Passivated
Glass-reinforced
Thermoplastic
50 Microinch
Gold Plated
Copper Alloy
Stainless Steel
Stainless Steel
Passivated
Glass-reinforced
Thermoplastic
50 Microinch
Gold Plated
Copper Alloy
Brass
Brass, Electroless
Nickel Plated*
Glass-reinforced
Thermoplastic
50 Microinch
Gold Plated
Copper Alloy
No. of Contacts
Wire Size
Contact Termination
Contact Rating
Couping
Polarization
Contact Spacing
Shell Styles
7,55
#24 AWG
thru #32 AWG
Crimp
3 Amps
Threaded
Keyways
.050 (1.27)
Centers
0-Wall Mtg.
6-Straight Plug
7,55, 85
#24 AWG
thru #32 AWG
Crimp
3 Amps
Threaded
Keyways
.050 (1.27)
Centers
0-Wall Mtg.
6-Straight Plug
7,19, 37
#24 AWG
thru #32 AWG
Crimp
3 Amps
Push/Pull
Keyways
.050 (1.27)
Centers
7-Jam Nut
6-Straight Plug
9-Rear Panel
Mtg. Receptacle
Shell
Coupling Nut
Insulator
Contacts
MIKM MIKQ MIK MIKM MIKQ
How to Order
SERIES
MIK M 6- 55 P * * * * * *
SERIES
MIK: Microminiature Circular 7, 19, 37, 55, 85 (H) 001 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
yellow.
18",7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681
System I.
1/2" uninsulated solid #25
AWG gold plated copper.
1" uninsulated solid #25 AWG
gold plated copper.
(H) 003 -
(L) 1 -
(L) 2 -
G - Cable nut and grip (MIKQ plug only)
N - Nut only (MIKQ plug only)
NOTE: Contact types cannot be interchanged
between shell styles.
P - Pin
S - Socket
H - Insulated round hook-up wire
L - Uninsulated round solid wire
No Letter - Screw couping, plastic shell
M - Screw coupling, metal shell
Q - Push/Pull, metal shell
0 - Wall mounting receptacle (MIK and
MIKM only)
6 - Straight plug (MIK, MIKM and MIKQ)
7 - Jam nut mount (MIKQ only)
9 - Rear panel mounted receptacle (MIKQ)
CONNECTOR TYPES
SHELL STYLES
CONNECTOR TYPE
SHELL STYLE
CONTACT ARRANGEMENT
CONTACT ARRANGEMENTS
CONTACT TYPE
CONTACT TYPE
TERMINATION TYPE
TERMINATION TYPES
TERMINATION LENGTH CODE
TERMINATION LENGTH CODE (STANDARDS)
HARDWARE
HARDWARE
RoHS COMPLIANCE
R
45
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Microminiature Circular - .050" Contact Spacing MIK
Standard Wire Termination Codes
The following termination codes are listed for your
information. For additional codes please refer to
Appendix on page 79 and 81. All wire lengths are
minimum.
HARNESS TYPES (H)
#26 AWG per MIL-W-16878 Type E, Teflon Stranded
Length
020
019
026
029
028
001
038
009
010
011
013
017
042
027
016
034
025
002
003
023
004
005
006
048
046
041
3 (76.2)
6(152.4)
8(203.2)
10 (254.0)
12(304.8)
18(457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36(914.4)
48(1219.2)
72(1828.8)
120 (3048.0)
-All YellowColorCoded
Contact Arrangements
Face View, Pin Side-(Male Twist Pin Contacts)
MIK/MIKM/MIKQ
7 Contacts
MASTER KEY (TYP)
2
36
77
8
1
1
14
13
1
5
12
20
29
39
48
58
67 74
66
57
47
38
28
19
11
4
75
81
82 85
49
10 16
17 24
25 31
32 39
4046
4752
53 55
59
10 15
16 22
23 28
29 33
34 37
3
12
16
1917
13
4
4
5
MIKQ
19 Contacts
MIKQ
37 Contacts
MIK/MIKM
55 Contacts
MIKM
85 Contacts
Cavity identification numbers are for reference only, they do not appear on connectors.
Shell Dimensions
++
D
DIA.
LA THD.
.335 (8.51)
Max.
RS
H (TYP.)
KA THD
D
DIA.
D
DIA.
R
S
H (TYP.)
D
DIA.
A THD.
K
F
L
A THD.
L
F
L
MIK (Rear Panel Mount Thickness - see Tabulation "T") Weight given is 1/2" uninsulated, solid #25 AWG gold plated copper pigtails
PlugReceptacle
Shell Size7only
Receptacle
Shell Size55 only
Plug
Plug
Part Number
by Shell Size
MIK6-7P
MIK6-55P
A
Thread
D
Max.
L
Max.
Avg. Weight
oz. (gm.) ±5%
5/16-24UNF-2B
9/16-24UNF-2A
.375 (9.52)
.755 (19.18)
.315 (8.00)
.460 (11.68)
.054 (1.54)
.202 (5.72)
Part Number
by Shell Size
MIK0-7S
MIK0-55S
A
Thread
D
± .010 (0.25)
F
Max.
H
± .003 (0.08)
K
± .010 (0.25)
L
Max.
R
± .005 (0.13)
S
Max.
T
Max.
Avg. Weight
oz. (gm.) ± 5%
5/16-24UNF-2B
9/16-24UNF-2A
.325 (8.26)
.625 (15.88)
.315 (8.00)
.440 (11.18)
.078 (1.98)
.089 (2.26)
.062 (1.57)
.100 (2.54)
.355 (9.02)
.495 (12.57)
.460 (11.68)
.580 (14.73)
.630 (16.00)
.760 (19.30)
.032 (0.81)
.062 (1.57)
.022 (.635)
.134 (3.81)
Receptacle
Microminiature Circular - .050" Contact Spacing MIKM/MIKQ
Shell Dimensions (Continued)
46
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
MIKM (Rear Panel Mount Thickness .335 (8.51) max. - see Tabulation "T")
LATHD.
D
DIA.
.3 35 (8 .51)
Max.
RS
H (TYP.)
H (TYP.)
KATHD
ATHD ATHD
D
DIA. D
DIA.
D
DIA.
F
L
L
S
R
K
F
L
Plug Receptacle
Shell Size 7 only
Receptacle
Receptacle
Shell Size 55 & 85
Plug
Plug
MIKM6-7P 5/16-24UNF-2A .375 (9.52) .315 (8.00) .054 (1.54)
MIKM6-55P 5/8-24UNEF-2B .775 (19.18) .440 (11.18) .333 (9.44)
MIKM6-85P 11/16-24UNEF-2B .860 (21.84) .460 (11.68) .419 (11.88)
MIKM0-7S 5/16-24UNF-2A .325 (8.26) .320 (8.13) .078 (1.98) .062 (1.57) .400 (10.16) .460 (11.68) .630 (16.00) .032 (0.81) .051 (1.45)
MIKM0-55S 5/8-24UNEF-2A .625 (15.88) .440 (11.18) .091 (2.31) .062 (1.57) .490 (12.45) .580 (14.73) .760 (19.30) .125 (3.18) .269 (7.62)
MIKM0-85S 11/16-24UNEF-2A .745 (18.92) .440 (11.18) .091 (2.31) .062 (1.57) .490 (12.45) .674 (17.12) .845 (21.46) .125 (3.18) .346 (9.80)
Part Number
by Shell Size
Part Number
by Shell Size
A
Thread
D
Max.
L
Max.
Avg. Weight
oz. (gm.)+_5%
A
Thread D
F
Max.
H
+_ .003 (0.08) K
L
Max.
R
+_ .005 (0.13)
S
Max.
T
Max.
Avg. Weight
oz. (gm.)+_5%
MIKQ6-7S .385 (9.78) .305 (7.75) .180 (4.57) .214 (6.08)
MIKQ6-19S .515 (13.08) .405 (10.29) .260 (6.60) .376 (10.70)
MIKQ6-37S .760 (19.30) .635 (16.13) .350 (8.89) .714 (20.23)
MIKQ6-7S .510 (12.95) .245 (6.22) .359 (9.12) 3/8-32UNEF-2A .128 (3.63)
MIKQ7-19P .575 (14.60) .345 (8.76) .470 (11.94) 1/2-28UNEF-2A .214 (6.08)
MIKQ7-37P .855 (21.71) .520 (13.20) .740 (18.80) 3/4-20UNEF-2A .300 (8.52)
MIKQ (Front Panel Mounting Type Shown-.093 (2.36) Thickness)
A
DIA. .760
(19.30) MAX.
B
DIA.
1.20
(30.48) MAX.
FOR SIZE 37 ONLY
C
DIA.
.950 (24.13) MAX.
NUT
MASTER KEY
A
.093 (2.36) REF.
.043±.005
(1.09±0.13)
D THD.
C DIM.
ACROSS FLAT
.495 (12.67) MAX.
B
Plug
Plug
Receptacle
Receptacle
*Std. Conn. not supplied with Cable Nut & Grip, See Mod Codes. Lanyard Relase Is Available. Consult factory.
*
Part Number
by Shell Size
A
MAX.
B
MAX.
C
Ref.
Avg. Weight
oz. (gm.)±5%
Part Number
by Shell Size
A
MAX.
B
MAX.
C
MAX.
D
Thread
Avg. Weight
oz. (gm.)±5%
Front Panel Mounting-MIKQ7
MIKQ Front Panel Mounting
A
B
DIA.
MIKQ7-7P .364 (9.24) .390 (9.91)
MIKQ7-19P .475 (12.06) .515 (13.08)
MIKQ7-37P .740 (18.78) .755 (19.17)
Shell Size A
± .005 (0.13)
B
DIA.
47
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Microminiature Circular - .050" Contact Spacing MIKQ
Shell Dimensions (Continued)
MIKQ9-7P (Back Panel Mounting)
MIKQ9-19P (Back Panel Mounting)
MIKQ9-37P (Back Panel Mounting)
MIKQ Rear Panel Mounting
Receptacle
Receptacle
Receptacle
Rear Panel Mounting-MIKQ9
Shell Size
MIKQ9-7P
MIKQ9-19P
MIKQ9-37P
.425 (10.76)
.535 (13.58)
.740 (18.78)
B
DIA.
A
.885 MAX.
(22.48 MAX.)
.730 ± .010
(18.54 ± 0.25)
.625 ± .010
(15.87 ± 0.25) DIA.
.525 ± .010
(13.33 ± 0.25)
KEY
KEY
.415 ± .010
(10.54 ± 0.25)
.570 (14.48)
DIA. MAX.
.485 (12.32)
MAX.
.250 ± .010
(6.35 ± 0.25)
.043 ± .005
(1.09 ± 0.13)
.245 (6.22)
DIA. MAX.
WIRE
EXTENSION
LENGTH
INSULATOR
SHELL
7/16-28 UNEF-2A
.250 ± .010 (6.35 ± 0.25)
9/16-24 UNEF-2A THREAD
.485 (12.32) MAX.
5/8
HEX-NUT
.043 ± .005 (1.09 ± 0.13)
INSULATOR
.345 (8.76)
DIA. MAX.
3/4-20 UNEF-2A THREAD
13/16 HEX NUT
SHELL
.250 ± .010
(6.35 ± 0.25) .043 ± .005
(1.09 ± 0.13) .505 MAX.
(12.83 MAX.)
.665 MAX.
(16.89) MAX.
INSULATOR
.490 MAX.
(12.45 MAX.)
.440 (11.18)
.564 (14.33)
.755 (19.17)
A
± .005 (0.13)
B
Dia.
.425
(10.79 )
+.015
-.000
+0.30
-0.00
1/2
HEX-NUT
Microstrips .050" Contact Spacing MT
48
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
The Cannon Microstrips provide an extremely
dense and reliable interconnection solution in
aminimum profile package, giving great appli-
cation flexibility. Available with latches or
guide pins, Microstrips are frequently found in
board-to-wire applications where high reliabili-
ty is a primary concern.
Three termination styles are available: solder
cup, pigtail, harness, or printed circuit leads.
The MicroPin Contact System assures maxi-
mum performance in a minimum package.
Product Features
High Performance MicroPin Contact System
High-density .050” contact spacing
Pre-wired for ease of installation
Fully potted wireterminations
Guide pins for alignment and polarizing
Quick-disconnect latches
3Amp current rating
Precision crimp terminations
Solder cup, pigtail or printed circuit terminations
Surface mount leads
Specifications
Current Rating 3Amps max
Dielectric Withstanding Voltage 900 VAC @ sea level; 300 VAC @ 70,000 feet altitude
Insulation Resistance 5000 megohms min.
Contact Resistance 8milliohms max.
Operating Temperature MTV polyester -56°C to +125°C; MTB diallyl phthalate -55°C to +150°C
Durability 500 cycles min.
Shock/Vibration 50 G’s/20 G’s
Connector Mating Force (8 oz.) x (# of contacts)
Latch Retention 5lbs. min.
Wire Size #26 AWG insulated wire, #25 AWG uninsulated solid wire. MT strips will also accommodate #24 AWG through #32 AWG.
For other wiring options contact the factory for ordering information.
General Performance requirements are designed to be comparable to MIL-DTL-83513
Materials and Finishes
Insulator MTV:Glass-filled polyester per MIL-M-24519; MTB: Glass-filled diallyl phthalate per MIL-M-14
Contact Copper Alloy per 83513-Style
Contact Finish 50 Microinches Min. Gold Plated per MIL-G-45204
Insulated Wire #26 AWG. 19/38 Stranded, silver-plated copper,TFE Teflon insulation per MIL-W-16878/4
Uninsulated Solid Wire #25 AWG gold-plated copper per QQ-W-343
Potting Material/Contact Encapsulant Epoxy
Latch 300 series stainless steel, passivated
MicroPin Contact System
The Cannon MicroPin Contact System offers
uncompromised performance in downsized
interconnects. The beryllium copper pin contact is
fully recessed in the insulator, assuring positive
contact alignment and robust performance. The
socket contact is precision machined from high
strength copper alloy and features a smooth lead-in
chamfer.
The MicroPin features seven points of electrical
contact. This contact system assures high normal
force, excellent wipe and superior shock and
vibration performance.
SLEEVE WIRE
WIRE CRIMP
49
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Microstrips .050" Contact Spacing MT
How to Order
R MTV1 – 16 P H001 01
RoHS Compliance
Series
MTB1 – High Temperature Diallyl Phthalate 150°C (Recommended for severe environments)
MTV1 – Polyester 125°C (Recommended for general purpose use)
Number of Cavities
2through 40.
This number is the total number of cavities including guide pins and latches. 40 positions is the
maximum recommended size for standard strips, but sizes up to 120 positions are available on request.
Contact Type
P- Pin
S–Socket
Termination Style
Solder Cup contacts for customer termination
S
Pre-wired Pigtails
H067 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, yellow
HY01 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, 10 color repeating
Straight Terminals .018” diameter,gold-plated
L1 – 5” extension
L2 – 1” extension
L57 – .190” extension
L61 – .125” extension
Right Angle Terminals staggered footprint .018” diameter,gold plated
AL57 – .190” extension
AL61 – .125” extension
Right Angle Terminals .050" in-line footprint .018" diameter,gold plated
BL57 – .190” extension
BL61 – .125” extension
Surface Mount .018” diameter, gold-plated
CL1
Guide Pin and Latch Options
01 – Guide pin installed in end cavities of socket strip. Blank holes in end cavities of pin strip.
02 – Guide pin installed in cavity #1 of socket Strip. Blank holes in cavity #1 of pin strip.
03 – Spring latches installed in end cavities of socket strip. Latch clips installed in end cavities of pin strip. For use with MTV1 only.
04 – Spring latch installed in center cavity of socket strip. Spring latch installed in center cavity of pin strip. For use with MTV1 only.
Socket StripPin Strip
01
Guide Pins In End Cavities
02
Guide Pins In Cavity #1
03
End Latches
04
Center Latch
CAV #1
SOCKET
CAV #1
PIN
Solder Cup Straight Terminals
Right Angle Terminals
.100" Spacing Staggered
ALL EVEN
NUMBERED
CONTACTS
.100 (2.54)
.100 (2.54)
AL57 .190 (4.83)
AL61 .125 (3.18)
Surface Mount Terminals
.0120 (0.30)
±.001 (0.03)
.010 (0.25)
TYP
.070 (1.78)
.030 (0.76)
.050 (1.27) MIN
SOLDER DIPPED
.025 (0.64)
REF
.160
(4.06)
.140
(3.56)
Right Angle Terminals
.050" Centers
.170 (4.32) MAX.
.065 (1.65) MAX.
.065 (1.65) MAX. .100 (2.54)
.018 (1.65)
±.002 (0.5)
BL57: .190 (4.83)
BL61: .125 (3.18) MIN+ .015 (0.38)
L1: .500 (12.7)
L2: 1.00 (25.4)
L57: .190 (4.83)
L6: .125 (3.18) MIN+ .015 (0.38)
.018 (.45)
±.002 (.05)
Microstrips .050" Contact Spacing MT
50
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Connector Weights
Contact (with std. 1/2”
copper pigtails) .040 gms.
MTB pin .021 gms.
Insulator socket .006 gms.
(per contact MTV pin .014 gms.
cavity) socket .004 gms.
Guide Stainless
Post Steel .035 gms.
Male .035 gms.
Latch Female .074 gms.
Terminal Dimensions
51
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Male Latch
.032 ±.003
(0.81 ±0.08)
DIA.
.200 ±.010
(5.08 ±0.25)
.010 (6.25)
REF
Female Latch
.100 (2.54)
REF
.020 (0.51)
REF
.250 (6.35)
MAX
.035 (0.89)
REF
.045 (1.14)
MAX
.076 (1.93)
MAX
.070 (1.78)
REF
.050 (1.27)
REF
NO CONTACT
.035 (0.89)
REF
.035 (0.89)
REF
.070 (1.78)
REF
.050 (1.27)
REF
NO CONTACT
.035 (0.89)
REF
.0085 (0.22)
REF
.077 (1.96)
MAX
.107 (2.72) MAX
.2835 (7.20)
REF
Latch Dimensions
Microstrips .050" Contact Spacing MT
Standard Wire Termination Codes
Harness Type - (H)
Length
H020
H019
H026
H029
H028
H001
H033
H009
H010
H011
H013
H017
H042
3 (76.2)
6 (152.4)
8 (203.2)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.5)
120 (3048.0)
H027
H016
H034
H025
H002
H003
H023
H004
H005
H006
H048
H046
H041
L61
L56
L57
L39
L58
L1
L14
L2
L7
L6
L16
L10
.125 (3.18)
.150 (3.81)
.190 (4.83)
.250 (6.35)
.375 (9.52)
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
All Yellow ColorCodedTerminationCode Length
#26 AWG per MIL-W-16878 Type E; Teflon Stranded
Solid UninsulatedType - (L)
#25 AWG Gold Plated Copper
Thefollowingtermination codesare listed for your
information.For additional codespleaserefer to
Appendix on page79 and 81. All wire lengths are
minimum.
Guide Pin Dimensions
Polarization
52
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Microminiature Strip - .100/.050" Contact Spacing MT
Modification code "-01" in the part number
refers to guide posts located on both ends
of the socket side of the 50-MIL STRIP
connector and empty cavities on the pin
side to accept the guide posts.
Although in many cases it is not necessary
to polarize 50-MIL STRIP connectors, there
are several ways to prevent cross plugging.
One method is the use of guide posts that
can be located in specified cavities to assure
that the contacts will align when these post
are positioned before mating.
MTB1 and MTV1 - .050 (1.27) Contact Centers
Receptacle Plug
.200 ± .010
(5.08 ± 0.25)
.032 ± .003
(0.81 ± 0.08)
DIA.
.126 ± .005
(3.20 ± 0.13)
.100 ± .005
(2.54 ± 0.13)
LEAD
LENGTH
.125 (3.18)
MAX. EPOXY
(INSULATED WIRE ONLY)
.050 (1.27) TYP.
A
A
CAVITY
#1
CAVITY
#1
CAVITY
#1
.283 ± .005
(7.19 ± 0.13)
LEAD
LENGTH
.125 (3.18)
MAX. EPOXY
(INSULATED WIRE ONLY)
CAVITY
#1
.070 ± .005 (1.78 ± 0.13): MTV
.080 ± .005 (2.03 ± 0.13): MTB
.070 ± .005 (1.78 ± 0.13): MTV
.080 ± .005 (2.03 ± 0.13): MTB
.050 (1.27) TYP.
NOTE: MTB1 available in up to 120 contacts.
Part
Number
by Size
MT*1-1**
MT*1-2**
MT*1-3**
MT*1-4**
MT*1-5**
MT*1-6**
MT*1-7**
MT*1-8**
MT*1-9**
MT*1-10**
MT*1-11**
MT*1-12**
MT*1-13**
MT*1-14**
MT*1-15**
MT*1-16**
MT*1-17**
MT*1-18**
MT*1-19**
MT*1-20**
.070 (1.78)
.120 (3.05)
.170 (4.32)
.220 (5.59)
.270 (6.85)
.320 (8.13)
.370 (9.40)
.420 (10.67)
.470 (11.94)
.520 (13.60)
.570 (14.48)
.620 (15.75)
.670 (17.02)
.720 (18.29)
.770 (19.56)
.820 (20.83)
.870 (22.10)
.920 (23.37)
.970 (24.64)
1.020 (25.91)
1.070 (27.18)
1.120 (28.45)
1.170 (29.72)
1.220 (30.99)
1.270 (32.36)
1.320 (33.53)
1.370 (34.80)
1.420 (36.07)
1.470 (37.34)
1.520 (38.61)
1.570 (39.88)
1.620 (41.15)
1.670 (42.42)
1.720 (43.69)
1.770 (44.96)
1.820 (46.23)
1.870 (47.50)
1.920 (48.77)
1.970 (50.04)
2.020 (51.31)
2.070 (52.58)
2.120 (53.85)
2.170 (55.12)
2.220 (56.39)
2.270 (57.66)
2.320 (58.93)
2.370 (60.20)
2.420 (61.47)
2.470 (62.74)
2.520 (64.01)
2.570 (65.28)
2.620 (66.55)
2.670 (67.82)
2.720 (69.09)
2.770 (70.36)
2.820 (71.63)
2.870 (72.90)
2.920 (74.17)
2.970 (75.44)
3.020 (76.71)
3.070 (77.98)
3.120 (79.25)
3.170 (80.52)
3.220 (81.79)
3.270 (83.06)
3.320 (84.33)
3.370 (85.60)
3.420 (86.87)
3.470 (88.14)
3.520 (89.41)
3.570 (90.68)
3.620 (91.95)
3.670 (93.22)
3.720 (94.49)
3.770 (95.76)
3.820 (97.03)
3.870 (98.30)
3.920 (99.57)
3.970 (100.84)
4.020 (102.11)
4.070 (103.38)
4.120 (104.65)
4.170 (105.92)
4.220 (107.19)
4.270 (108.46)
4.320 (109.73)
4.370 (111.00)
4.420 (112.27)
4.470 (113.54)
4.520 (114.81)
4.570 (116.08)
4.620 (117.35)
4.670 (118.62)
4.720 (119.89)
4.770 (121.16)
4.820 (122.43)
4.870 (123.70)
4.920 (124.97)
4.970 (126.24)
5.020 (127.50)
5.070 (128.78)
5.120 (130.05)
5.170 (131.32)
5.220 (132.59)
5.270 (133.86)
5.320 (135.13)
5.370 (136.40)
5.420 (137.67)
5.470 (138.94)
5.520 (140.21)
5.570 (141.48)
5.620 (142.75)
5.670 (144.02)
5.720 (145.29)
5.770 (146.56)
5.820 (147.83)
5.870 (149.10)
5.920 (150.37)
5.970 (151.64)
6.020 (152.91)
MT*1-21**
MT*1-22**
MT*1-23**
MT*1-24**
MT*1-25**
MT*1-26**
MT*1-27**
MT*1-28**
MT*1-29**
MT*1-30**
MT*1-31**
MT*1-32**
MT*1-33**
MT*1-34**
MT*1-35**
MT*1-36**
MT*1-37**
MT*1-38**
MT*1-39**
MT*1-40**
MT*1-41**
MT*1-42**
MT*1-43**
MT*1-44**
MT*1-45**
MT*1-46**
MT*1-47**
MT*1-48**
MT*1-49**
MT*1-50**
MT*1-51**
MT*1-52**
MT*1-53**
MT*1-54**
MT*1-55**
MT*1-56**
MT*1-57**
MT*1-58**
MT*1-59**
MT*1-60**
MT*1-61**
MT*1-62**
MT*1-63**
MT*1-64**
MT*1-65**
MT*1-66**
MT*1-67**
MT*1-68**
MT*1-69**
MT*1-70**
MT*1-71**
MT*1-72**
MT*1-73**
MT*1-74**
MT*1-75**
MT*1-76**
MT*1-77**
MT*1-78**
MT*1-79**
MT*1-80**
MT*1-81**
MT*1-82**
MT*1-83**
MT*1-84**
MT*1-85**
MT*1-86**
MT*1-87**
MT*1-88**
MT*1-89**
MT*1-90**
MT*1-91**
MT*1-92**
MT*1-93**
MT*1-94**
MT*1-95**
MT*1-96**
MT*1-97**
MT*1-98**
MT*1-99**
MT*1-100**
MT*1-101**
MT*1-102**
MT*1-103**
MT*1-104**
MT*1-105**
MT*1-106**
MT*1-107**
MT*1-108**
MT*1-109**
MT*1-110**
MT*1-111**
MT*1-112**
MT*1-113**
MT*1-114**
MT*1-115**
MT*1-116**
MT*1-117**
MT*1-118**
MT*1-119**
MT*1-120**
Part
Number
by Size
A
±.015 (0.38)
A
±.015 (0.38)
Part
Number
by Size
A
±.015 (0.38)
Part
Number
by Size
A
±.015 (0.38)
Part
Number
by Size
A
±.015 (0.38)
Part
Number
by Size
A
±.015 (0.38)
53
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Microminiature Strip - .100/.050" Contact Spacing MT
MTB2 and MTV2 - .100 (2.54) Contact Centers
Receptacle Plug
.200 ± .010
(5.08 ± 0.25)
.032 ± .003
(0.81 ± 0.08)
DIA.
.126 ± .005
(3.20 ± 0.13)
.100 ± .005
(2.54 ± 0.13)
LEAD
LENGTH
.125 (3.18)
MAX. EPOXY
(INSULATED WIRE ONLY)
.100 (2.54) TYP.
A
A
CAVITY
#1
CAVITY
#1
CAV #1
.283 ± .005
(7.19 ± 0.13)
LEAD
LENGTH
.125 (3.18)
MAX. EPOXY
(INSULATED WIRE ONLY)
CAVITY
#1
.070 ± .005 (1.78 ± 0.13): MTV
.080 ± .005 (2.03 ± 0.13): MTB
.070 ± .005 (1.78 ± 0.13): MTV
.080 ± .005 (2.03 ± 0.13): MTB
.100 (2.54)
TYP.
Part
Number
by Size
MT*2-1**
MT*2-2**
MT*2-3**
MT*2-4**
MT*2-5**
MT*2-6**
MT*2-7**
MT*2-8**
MT*2-9**
MT*2-10**
MT*2-11**
MT*2-12**
MT*2-13**
MT*2-14**
MT*2-15**
MT*2-16**
MT*2-17**
MT*2-18**
MT*2-19**
MT*2-20**
MT*2*21**
MT*2-22**
MT*2-23**
MT*2-24**
MT*2-25**
MT*2-26**
MT*2-27**
MT*2-28**
MT*2-29**
MT*2-30**
MT*2-31**
MT*2-32**
MT*2-33**
MT*2-34**
MT*2-35**
MT*2-36**
MT*2-37**
MT*2-38**
MT*2-39**
MT*2-40**
MT*2-41**
MT*2-42**
MT*2-43**
MT*2-44**
MT*2-45**
MT*2-46**
MT*2-47**
MT*2-48**
MT*2-49**
MT*2-50**
MT*2*51**
MT*2-52**
MT*2-53**
MT*2-54**
MT*2-55**
MT*2-56**
MT*2-57**
MT*2-58**
MT*2-59**
MT*2-60**
.070 (1.78)
.170 (4.32)
.270 (6.86)
.370 (9.40)
.470 (11.94)
.570 (14.48)
.670 (17.02)
.770 (19.56)
.870 (22.10)
.970 (24.64)
1.070 (27.18)
1.170 (29.72)
1.270 (32.26)
1.370 (34.80)
1.470 (37.34)
1.570 (39.88)
1.670 (42.42)
1.770 (44.96)
1.870 (47.50)
1.970 (50.04)
2.070 (52.58)
2.170 (55.12)
2.270 (57.66)
2.370 (60.20)
2.470 (62.74)
2.570 (65.28)
2.670 (67.82)
2.770 (70.36)
2.870 (72.90)
2.970 (75.44)
A
±.015 (0.38)
Part
Number
by Size
A
±.015 (0.38)
3.070 (77.98)
3.170 (80.52)
3.270 (83.06)
3.370 (85.60)
3.470 (88.14)
3.570 (90.68)
3.670 (93.22)
3.770 (95.76)
3.870 (98.30)
3.970 (100.84)
4.070 (103.38)
4.170 (105.92)
4.270 (108.46)
4.370 (111.00)
4.470 (113.54)
4.570 (116.08)
4.670 (118.62)
4.770 (121.16)
4.870 (123.70)
4.970 (126.24)
5.070 (128.78)
5.170 (131.32)
5.270 (133.86)
5.370 (136.40)
5.470 (138.94)
5.570 (141.48)
5.670 (144.02)
5.770 (146.56)
5.870 (149.10)
5.970 (151.64)
How to Order
Not applicable for printed
circuit board configurations
shown on pages 55 & 56
MEB
SERIES PREFIX
SERIES PREFIX
MEB - L -
H -
S -
BR -
Consult factory for wire lead modification codes.
Consult factory
Uninsulated solid wire
Insulated stranded round harness
wire
Solder pots
PC board right angle, socket side only
Micro edgeboard, plug with twist pin
contacts or recept. with microsocket
contacts.
1 - .050 (1.27) centers 128/184
2 - .100 (2.54) centers 64/92
(alternate contact holes)
64, 92, 128, 184
P - Pin
S - Socket
* For other contact spacing acommodations consult customer service.
CONTACT SPACING
CONTACT SPACING
LAYOUT
LAYOUT
CONTACT TYPE
CONTACT TYPE
TERMINATION MODIFICATIONS
TERMINATION MODIFICATIONS
LEAD LENGTH
OTHER MODIFICATIONS
LEAD LENGTH
OTHER MODIFICATIONS
1 128 P * * * * *-
RoHS COMPLIANCE
R
54
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Edgeboard - .050" Contact Spacing MEB
The Micro Edgeboard (MEB) connector series
provides a combination of high density and high
reliability for applications in airborne and space
systems, computers and peripherals, and
industrial /commercial control systems. This
series incorporates the proven
MICROPINTM/MICROSOCKETTM contact. This
contact has an outstanding record of high
reliability and millions of contacts are in use in
various applications where electrical
interconnects are used.
The MEB has machined aluminum shells for
ruggedness, diallyl phthalate insulator for top
electrical performance and a 36-position
polarization key system to prevent cross plug-
ging. Contacts are on .050 (1.27) center
spacings. A variety of termination types are
available, including 90˚ or right angle pigtails
for multi-layered P.C. boards, "coke bottle”
termination for double-sided P.C. boards.
Harnessing capability is also available for both
pin and socket sides.
The MEB, including the SBR 90˚ or right angle
variation available for multi-layer boards, can
be mounted on the female (daughter) side of
double or single-sided P.C. boards. The mating
male (mother) board side can have the
terminations formed to meet the application
demands.
Conforms to MIL-C-55302/120 thru 123. (not
qualified)
Specifications
Shell:
Contact, Pin and Socket:
Jackscrew/Jackpost:
Insulator:
6061-T6 Aluminum Alloy per QQ-A-200/8 or QQ-A-225/8, electroless nickel per
SAE AMS-C-26074, Class 4, except .0010 to .0015 (0.03 to 0.04) thick or conversion
coating per MIL-C-5541, Class 3, color gold.
Copper Alloy, 50 microinch gold per ASTM B488, Type II, Code C, Class 1.25
303 stainless steel, passivated per QQ-P-35.
Glass-filled diallyl phthalate per MIL-M-14, Type SDG-F, color green Polyester
per MIL-M-24519, Type GPT-30F , color black available for MEB-128 upon
request.
MATERIALS AND FINISHES
Consult factory for stranded wie lead modifications codes.
Size or Length:
Coupling:
Polarization:
Contact Spacing Centers:
Shell Styles:
2sizes
Friction/Jackscrew
Shells, polarizing keys (36 positions)
.050 (1.27)
Plug and receptacle
TERMINATION TYPES
MECHANICAL FEATURES
55
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Edgeboard - .050" Contact Spacing MEB
Plug (Mother Board)
Receptacle (Daughter Board)
FH
G
#24 AWG
RETAINING PIN HOLES
.050
(1.27)
.050 (1.27)
A
B1
A1
B
.250 (6.35)
.180 ± .005
(4.57 ± .13)
D
C
E
.0945 ± .0035 (2.40 ± .09) DIA.
THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY
.187 (4.75) DIA. THRU "B"SIDE ONLY
Part No.
128S
128SBR
.5 (14.17)
.5 (14.17)
*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.
3.950 (100.33) .250 (6.35) 3.700 (93.98).400 (10.16) .300 (7.62) .280 (7.11) .030 (0.76) .200 (5.08)
Weight
oz. (gm.) Max.
A
±.015 (0.38)
B
±.010 (0.25)
C
±.010 (0.25)
D
±.010 (0.25)
E
±.010 (0.25)
F
Max.
G*
Max.
H
±.020 (0.51)
MEB1-12BS
FH
G
#24 AWG
RETAINING PIN HOLES
.050
(1.27)
.050 (1.27)
A
B1
A1
B
.250 (6.35)
.180 ± .005
(4.57 ± .13)
D
C
E
.0945 ± .0035 (2.40 ± .09) DIA.
THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY
.187 (4.75) DIA. THRU "B"SIDE ONLY
Part No.
128S
128SBR
.5 (14.17)
.5 (14.17)
*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.
3.950 (100.33) .250 (6.35) 3.700 (93.98).400 (10.16) .300 (7.62) .280 (7.11) .030 (0.76) .200 (5.08)
Weight
oz. (gm.) Max.
A
±.015 (0.38)
B
±.010 (0.25)
C
±.010 (0.25)
D
±.010 (0.25)
E
±.010 (0.25)
F
Max.
G*
Max.
H
±.020 (0.51)
MEB1-12BS
56
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Edgeboard - .050" Contact Spacing MEB
Plug (Mother Board)
MEB1-184P
B2
B1
A1
A2
.050 (1.27) TYP
RETAINING PIN HOLES
G
F
TYP E
H
#25 AWG
(MEB1-184P)
or
.075 (1.91)
.075 (1.91) TYP.
Part No.
184P 1.0 (28.35) 2.775 (70.49).343 (8.71)5.800 (147.32) .250 (6.35).400 (10.16) .280 (7.11) .350 (8.89) .275 (6.99)
Weight
oz. (gm.) Max.
A
+_.015 (0.38)
B
+_.010 (0.25)
C
+_.005 (0.13)
D
+_.010 (0.25)
E
+_.010 (0.25)
F
+_.010 (0.25)
G
+_.025 (0.64)
H
+_.025 (0.64)
.075
(1.91)
A
CC
A1
B1
B
D
.0945 +_ .0035
(2.40 +_ 0.09)
3 PLACES
Receptacle (Daughter Board)
FH
G
#24 AWG
RETAINING PIN HOLES
.075
(1.91)
.050 (1.27) TYP.
A
C
C
C
B1
A1
B
.250
(6.35)
.180 ± .005
(4.57 ± 0.13)
J
D
E
.0945 ± .0035 (2.40 ± .09) DIA.
THRU .187 (4.75) X .075 (1.91) DEEP "C" BORE
3 PLACES-A SIDE ONLY.
.187 (4.75) DIA. 3 PLACES-B SIDE ONLY
Part No.
184S
184SBR
1.0 (28.35)
1.0 (28.35)
*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.
All round pigtail #25 AWG wire termination designs available for the MEB1-12B receptacle will apply on the MEB1-184 series also.
5.800 (147.32) .343 (8.71) 2.775 (70.49) .400 (10.16) .300 (7.62) .280 (7.11) .030 (0.76) .200 (5.08) .250 (6.35)
Weight
oz. (gm.) Max.
A
±.015 (0.38)
B
±.010 (0.25)
C
±.005 (0.13)
D
±.010 (0.25)
E
±.010 (0.25)
F
Max.
G
Max.
H
±.020 (0.51)
J
±.010 (0.25)
MEB1-184S
57
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Edgeboard - .050" Contact Spacing MEB
PC Board Right Angle
.075
(1.91)
.050
(1.27)
.150
(3.81)
.075
(1.91)
.100
(2.54)
.110
(2.79)
MIN.
.100
(2.54)
3PLACES
PC
BOARD
ROW B
EVEN*
ROW A
EVEN*
ROW B
ODD*
ROW A
ODD*
.275
(6.99)
.180
(4.57)
B6 B4 B2
B7
A7
A6
A5 A3
A2 A1
A1
B1
B1
MEB1-128SBR
Keying Accessory - Key and Retaining Pin
.186 ± .003 HEX.
(4.72 ± 0.08)
A
B
C
.106 ± .003
(2.69 ± 0.08)
DIA.
#2-56 UNC-2B
THREAD
.029 (0.74)
DIA. MAX.
.029 (0.74)
DIA. MAX.
.034 ± .001
(0.86 ± 0.03)
.034 ± .001
(0.86 ± 0.03)
E
D
MEB-184
P/N 980-0004-129
MEB-128
P/N 980-0003-879
P/N 201-9509-000
A
± .003 (0.08)
.081 (2.06) .325 (8.26) .089 (2.26) .250 (6.35) .313 (7.95)
B
± .005 (0.13) C
± .003 (0.08) D
± .010 (0.25) E
± .010 (0.25)
Polarizing Hardware Kit
Contains 2 polarizing keys and 4 spiral pins.
MEB-128-P/N 320-9514-003
MEB-184-P/N 320-9514-002
58
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Micro Edgeboard - .050" Contact Spacing MEB
Jackscrew/ Jackpost Assembly (MEB 64 & 128 Sizes Only)
Jackpost Kit
Jackscrew Kit
MEB plug or receptacle-P/N 320-9514-001 RETAINING
PIN
RETAINING
PIN
.270 (6.86)
MAX.
.045
(1.14)
REF.
.790 ± .010
20.07 ± 0.25)
JACKSCREW
ASSEMBLY
JACKPOST
#2-56
UNC-2A
THREAD
RETAINING
PIN
JACKSCREW
ASSEMBLY
RETAINING
PIN
PLUG
CONNECTOR
WASHER
[.022 (0.56) thk]
Plug
with Jackscrew Receptacle
with Jackscrew
JACKPOST
RECEPTACLE
CONNECTOR
.260
(6.60)
MAX.
#2-56
UNC-2A
THREAD
WASHER
[.032 (0.81) THK]
MEB plug-P/N 320-9521-001
MEB receptacle-P/N 320-9521-000
Contains 2 bushings and 4 spirals pins
Contains 2 jackscrew assemblies
Special Variations
.016
(0.41)
DIA.
.250
(6.35)
.580
(14.73)
4-40 UNC-THD
THRU HOLE
.200
(5.08)
MIN.
.110
(2.79)
2 PLACES
.030
(0.76)
.060
(1.52)
.275
(6.99)
.125 +_ .010
(3.18 +_ 0.25)
2 PLACES
.285
(7.24)
MAX.
.100
(2.54)
31 PLACES
Alternative Receptacle Configuration
59
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
The Centi Line - .075" Contact Spacing
Standard Data
The Cannon Centi connectors are especially
suitable for commercial applications such as
computers, instrumentation, communications
and audio equipment. They are available in D
subminiature size metal shell rectangular, plas-
tic shell rectangular and strip configurations.
All Centi connectors use the reliable twist pin
contact design in a 5 amp version terminated
on .075 (1.91) and .100 (2.54) centers. The
Centi contact is crimp removable, connectors
are available for customer assembly. Standard
crimp and assembly tools are available.
The twist pin contact is recessed within the
insulator housing while the rugged cylindrical
socket is exposed. When the connector halves
are mated, the chamfered sockets guide the
pins into positive alignment. The CentipinTM
contact, now under compression, forms a
multi-point contact with the CentisocketTM to
provide a high degree of reliability.
Contact rating: 5 amps max, except BR
Series (2 amps max.)
Minimum contact centers: 0.075 (1.91).
Wiresizes: #22 thru #26 AWG, stranded or
solid.
Contact termination: Multiple indent crimp.
Contact retention: Crimp snap-in/removable.
Contact materials and finish: Copper alloy,
gold- plated per ASTM B488, Type II, Code
C, Class 1.25.
Mating/unmating force: 12 oz. per contact,
max.
Performance Data
Test
Method 301:
1,000 VAC at sea level
300 VAC at 70,000' altitude
Method 302, Condition A
Method 107, Condition A
+55˚C to +85˚C
Method 213, Condition I:
100 G's, 3 axes, 6 millisecond
duration sawtooth pulse
Method 204, Condition B:
15 G's, 10-2,000 Hz, 12 hours
500 cycles of mating and
unmating, 500 CPH max.
Method 106, Omit 7a and 7b
Method 101, Condition B:
48 hours
Method 307:
At 5 amps
-
No breakdown
No breakdown
5,000 megohms minimum
No physical damage
No physical damage
No loss of continutiy> 1/µsec
No physical damage
No loss of continuity> 1µsec
No mechanical or electrical defects
Insulation resistance > 100 megohms
Shall be capable of mating and unmating
and meet contact resistance requirements
9 milliohms maximum
4 lb. minimum axial load
(after 10 insertion extraction cycles)
Dielectric Withstanding
Voltage
Insulation Resistance
Thermal Shock
Physical Shock
Vibration
Durability
Moisture Resistance
Salt Spray
Contact Resistance
Contact Retention
Method Criteria of Acceptance
How to Order
SERIES
NOTE: Connectors may be ordered less contacts by adding the mod callout "FO" at end of number.
Contacts are then supplied in bulk form.
* Accommodates AWG #26 thru #22
2D
2D
E
AF
19
31
S
PBR* * * *
SERIES
2D - Double Density D19, 31, 52, 79 and 100 BR - 90˚ right angle PCBmounting
(For BR Series use "P" to designate jackpost)
F171 - Jackpost assembly
F172- Standard jackscrew
F173 - Lowprofile jackscrew
For other modifications consult factory
P-Pin
S-Socket
E,A, B, C and D
Omit if not required
SHELL SIZE
SHELL SIZE
FLOAT MOUNTS
FLOAT MOUNTS
CONTACT ARRANGEMENT
CONTACT ARRANGEMENT
CONTACT TYPE
CONTACT TYPE*
TERMINATION
TERMINATION
MODIFICATION
MODIFICATION
RoHSCOMPLIANCE
R
Double Density D - .075" Contact Spacing 2D
The Double Density D is a rectangular connector in
the popular D Subminiature shell configuration
featuring double the contact density in the same
insert area. The Double Density D connector can
thus accommodate up to 100 contacts instead of 50.
This double contact density is achieved by using
field-proven, highly reliable CentipinTM/CentisocketTM
contacts on .075 (1.91) centers, in the positive con-
tact alignment design. In this design contact
positions are reversed; the flexible CentipinTM
contacts are recessed in the insulator and the more
rugged CentisocketTMcontacts are exposed. This
reversal of positions, and the chamfered-entry of the
sockets, assures positive mating even under severe
misalignment conditions. The contacts are retained
in the monobloc insulator by a resilient internal
shoulder that snaps into a locking groove in the con-
tact. The chamfered front of the contact will not
damage the internal shoulder in the insulator.
Contacts are crimp removable type.
The Double Density D connector is available in the
five popular shell and insert sizes accommodating up
to100 contacts. These connectors mate exclusively
with other Double Density D connectors. A wide
range of accessories can be used, including junction
shells, potting cups, switching shells, guide pin
plates, and dust caps.
1.STANDARD D HARDWARE-
2. ONE PIECE MONOBLOCK INSULATOR-
Including full range of D-Subminiature accessories
glass-filled nylon material
thermoplastic internal shoulder snaps into a locking groove in the contact.
seven outer wiping surfaces assure electrical continuity even under severe
shock and vibration
flexible pin is recessed in insulator cavity and rugged socket is exposed
assure alignment during mating and prevent scooping
Retention Force: 8 lbs. min. initially, 4 lbs. min. after 10 cycles.
3. CONTACT RETENTION-
4. TWIST PIN CONTACTS-
5. POSTIVE CONTACT ALIGNMENT-
6. GUIDE-IN KEYS AND KEYWAYS-
1
2
3
4
5
6
Specifications
WEIGHT
Part Number
by shell size
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
2DB52S
2DC79P
2DC79S
2DD100P
2DD100S
4.05
3.75
5.20
4.90
8.75
7.15
11.70
9.70
12.85
10.95
5.02
5.17
6.78
7.22
11.40
11.05
15.73
15.62
17.95
18.45
.142
.133
.183
.173
.308
.252
.413
.342
.453
.386
*Shell
Mounting Hardware
and Float Mounts
Insulator
Contacts
Alternate finish,
Modification Code
Steel, cadmium plated with yellow chro-
mate supplementary coating
Stainless steel
Glass-filled nylon
Copper alloy, gold plate
A106 Gold over brass
A156 Gold over brass
A197 Tin/Lead over steel
Sizes
Coupling
Polarization
Contact Spacing
Contact Termination
- Five shell sizes: E, A, B, C, and D
- Friction or jackscrew
- Keystone-shaped shells
- .075 (1.91)
- Crimp snap-in
*Brass non-magnetic also available
.177
.182
.239
.255
.402
.390
.555
.551
.633
.651
Weight (in gr.)
Less With Contacts
Weight (in oz.)
Less With Contacts
MATERIALS AND FINISHES MECHANICAL FEATURES
-
-
-
-
-
60
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
61
www.ittcannon.com
Double Density D - .075" Contact Spacing 2D
Standard Shell
++++
Part Number
by Shell Size
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.236 (5.99)
2DB52S
2DC79P
2DC79S
2DD100P
2DD100S
.236 (5.99)
.236 (5.99)
.236 (5.99)
.236 (5.99)
.236 (5.99)
T
+ .020 (0.51)
- .000 (0.00)
Part Number
by Shell Size
T
+ .020 (0.51)
- .000 (0.00)
A
B
C
T
.856(21.74)MAX.
D
M
K
L
J
V
G
H
TWO MTG. HOLES
.123 ± .005
(3.12 ± 0.13)
E
10˚ (TYP)
Float Mount
+
++
+
TWO MTG. HOLES
.0885 ± .0025
(2.248 ± 0.064)
G
H
A
B
10˚ (TYP)
C
DE
K
J
N
M
.032 (.812)
TOTAL
DIAMETRAL
FLOAT V
Part Number
by Shell Size
A
± .015 (0.38)
E
±.015 (0.38)
B
± .010 (0.25)
C
± .010 (0.25)
D
± .010 (0.25)
G
± .010 (0.25)
H
± .010 (0.25)
J
± .010 (0.25)
K
± .010 (0.25)
L
± .010 (0.25)
M
± .010 (0.25)
N
± .010 (0.25)
V
Max.
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
2DB52S
2DC79P
2DC79S
2DD100P
2DD100S
1.213 (30.81)
1.213 (30.81)
1.541 (39.14)
1.541 (39.14)
2.088 (53.03)
2.088 (53.03)
2.729 (69.31)
2.729 (69.31)
2.635 (66.92)
2.635 (66.92)
.697 (17.70)
.640 (16.26)
1.025 (26.03)
.968 (24.58)
1.583 (40.21)
1.508 (38.30)
2.231 (56.67)
2.156 (54.76)
2.127 (54.02)
2.062 (52.37)
.984 (24.99)
.984 (24.99)
1.312 (33.32)
1.312 (33.32)
1.852 (47.04)
1.852 (47.04)
2.500 (63.50)
2.500 (63.50)
2.406 (61.11)
2.406 (61.11)
.360 (9.14)
.308 (7.82)
.360 (9.14)
.308 (7.82)
.378 (9.60)
.308 (7.82)
.378 (9.60)
.308 (7.82)
.484 (12.29)
.420 (10.67)
.494 (12.55)
.494 (12.55)
.494 (12.55)
.494 (12.55)
.494 (12.55)
.494 (12.55)
.494 (12.55)
.494 (12.55)
.605 (15.37)
.605 (15.37)
.759 (19.28)
.759 (19.28)
1.083 (27.51)
1.083 (27.51)
1.625 (41.27)
1.625 (41.27)
2.272 (57.71)
2.272 (57.71)
2.178 (55.32)
2.178 (55.32)
.422 (10.72)
.422 (10.72)
.422 (10.72)
.422 (10.72)
.422 (10.72)
.422 (10.72)
.422 (10.72)
.422 (10.72)
.534 (13.56)
.534 (13.56)
.036 (.914)
.032 (213)
.036 (.914)
.032 (213)
.036 (.914)
.032 (213)
.036 (.914)
.032 (213)
.036 (.914)
.032 (213)
.236 (5.99)
.243 (6.17)
.236 (5.99)
.243 (6.17)
.231 (5.87)
.243 (6.17)
.231 (5.87)
.243 (6.17)
.231 (5.87)
.243 (6.17)
.055 (1.40)
.047 (1.19)
.055 (1.40)
.047 (1.19)
.055 (1.40)
.047 (1.19)
.055 (1.40)
.047 (1.19)
.055 (1.40)
.047 (1.19)
.422 (10.72)
.429 (10.90)
.422 (10.72)
.429 (10.90)
.426 (10.82)
.429 (10.90)
.426 (10.82)
.429 (10.90)
.426 (10.82)
.429 (10.90)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.129 (3.28)
.120 (3.05)
.129 (3.28)
.120 (3.05)
.129 (3.28)
.120 (3.05)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
For shell with float mounts, add letter F after shell size, e.g., 2DEF19P.
Jackscrew/Jackpost Assembly
#4-40 UNC-2A THREAD #4-40 UNC-2A THREAD
#4-40 UNC-2A THREAD
#4-40 UNC-2B
THREAD
.233 (5.92)
.223 (5.66)
.325 ± .015
(8.26 ± 0.38)
.025 (0.64)
MAX.
.025 (0.64)
MAX.
.180 ± .025 Grip
(4.57 ± 0.64) Length
.180 ± .025 Grip
(4.57 ± 0.64) Length
.230 (5.84) MAX.
.620 ± .010
(15.75 ± 0.25)
Standard (F172) Jackscrew
(factory installed)
Low Profile (F173) Jackscrew
(factory installed)
Jackpost (F171)
Front Panel Connector Mounting Only
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
62
www.ittcannon.com
Double Density D - .075" Contact Spacing 2D
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Contact Arrangements
DE
19 Contacts
All views are pin front face. Use reverse order for socket side.
Cavity identification numbers are shown for reference only and do not appear on insulator front face. However they do appear on rear of insulator.
1
7
14
6
13
19
1
11
22
10
21
31
1
18
36
17
35
52
1
27
54
26
53
79
1
27
52
76
26
51
75
100
DA
31 Contacts
DB
52 Contacts
DD
100 Contacts
DC
79 Contacts
90˚ PCB Mounting - 3 Row
.148
(3.76)
MIN.
.253 (6.43)
.233 (5.92)
.130 (3.30)
.100 (2.54)
.125 (3.18)
.115 (2.92)
DIA. TYP.
.0375
(0.95)
REF.
.075
(.190)
REF.
.690
(17.53)
MAX.
.510 (12.95)
.490 (12.45)
.510 (12.95)
.480 (12.18)
CAV. #1
.065 (1.65)
#4-40
UNC-2B THREAD
(2PLACES)
LAST
LEAD
PCB Termination Leads
(all contact arrangements)
.024 (6.10) to .028 (7.11).
Suggested finished PC hole
Size .033 (8.38) +_ .003 (0.08)
LEAD #1
LAST CAV.
B
A
A
.075 (1.90)
.100
(2.54)
REF.
.100
(2.54)
REF.
B
2x
Part Number
by Shell Size
A
± .015 (0.38)
B
± .010 (0.25)
C
Max.
2DE19SBRP
2DA31SBRP
2DB52SBRP
2DC79SBRP
1.215 (30.86)
1.540 (39.12)
2.090 (53.09)
2.730 (69.34)
.984 (24.99)
1.312 (33.32)
1.852 (47.04)
2.500 (63.50)
.690 (17.53)
.690 (17.53)
.690 (17.53)
.690 (17.53)
63
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
90˚ PCB Mounting - 4 Row
++++++
++++++
+++++++
+++++++
++
+++
+++
+ + +
++++++
++++++
+++++++
+++++++
++
+++
+++
+ + +
+
+
.130
(3.30)
MIN.
.253 (6.43)
.233 (5.92)
.790
(20.07)
MAX.
.125 (3.18)
.115 (2.92)
DIA. TYP.
.510 (12.95)
.490 (12.45)
.065 (1.65)
.620 (15.75)
.590 (14.99)
.075 (1.90)
CAV #100
A
A
LEAD
#100
Part Number
by Shell Size
2DD100SBRP
A
+_ .015 (0.38)
B
+_ .010 (0.25)
C
Max.
2.635 (66.93) 2.406 (61.11) .790 (20.07)
Contact Arrangements - Page 62
LEAD
#1
CAV #1
#4-40
UNC-2B THREAD
(2 PLACES)
B
B
.0375 (0.94) REF.
.075 (1.90) REF.
.100
(2.54)
REF.
.100
(2.54)
REF.
.200
(5.08)
REF.
Double Density D - .075" Contact Spacing 2D
64
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Double Density D - .075" Contact Spacing 2D
Panel Cutouts
G
B
A
FE
KTYP R
FULL R
D
C
C
D
G
.032 (0.81) R MAX. TYP
10˚0' TYP.
H
Mtg.
Method
A
+_ .005 (0.13)
B
+_ .005 (0.13)
C
+_ .005 (0.13)
D
+_ .005 (0.13)
E
+_ .005 (0.13)
F
+_ .005 (0.13)
G
+_ .002 (0.05)
H
+_ .002 (0.05)
K
+_ .002 (0.05)Conn.
2DE
2DA
2DB
2DC
2DD
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
.874 (22.20)
.806 (20.47)
1.202 (30.53)
1.134 (28.80)
1.743 (44.27)
1.674 (42.52)
2.391 (60.73)
2.326 (59.08)
2.297 (58.34)
2.218 (56.34)
.437 (11.10)
.403 (10.24)
.601 (15.26)
.567 (14.40)
.872 (22.15)
.837 (21.26)
1.196 (30.38)
1.163 (29.54)
1.149 (29.18)
1.109 (28.17)
.984 (24.99)
.984 (24.99)
1.312 (33.32)
1.312 (33.32)
1.852 (47.04)
1.852 (47.04)
2.500 (63.50)
2.500 (63.50)
2.406 (61.11)
2.406 (61.11)
.492 (12.50)
.492 (12.50)
.656 (16.66)
.656 (16.66)
.926 (23.52)
.926 (23.52)
1.250 (31.75)
1.250 (31.75)
1.203 (30.56)
1.203 (30.56)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.623 (15.82)
.555 (14.10)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.312 (7.92)
.278 (7.06)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
For contact part numbers, termination tooling and assembly see pages 67-69.
Panel Mounting
3/32 THICKNESS (REF. )
RECOMMENDED RIVET THICKNESS
RIVET THICKNESS
Front Mounting
Standard
Rear Mounting
Standard
Front Mounting
Float
Rear Mounting
Float
65
www.ittcannon.com
Centi-D Loc-.075" Contact Spacing CDL
How to Order
Asubminiature allplastic high density "D" rectan-
gularconnector. TheCDL is ageneralpurpose
connector with a peripheral o-ring and wire sealing
gasket.Connectorutilizesrear insertion, front re-
lease,crimpsnap-in size 22,centi-loc contacts
installable by the custormer or, if preferred, by the
factory.
MATERIAL
Insulator:
Dielectric Gasket:
Contact:
Seal Ring
Black Nylon
Polychloroprene
Copper Alloy, Gold Plated
Silicone
SERIES
SERIES
Centi-D Loc Series 139
(Consult customer service for other sizes)
P - Centi-loc pin
S - Centi-loc socket
F0 - Less contacts
2
2A
- No lock (mtg. holes)
- No lock type with rear gasket
CONTACT ARRANGEMENT
CONTACT STYLE
MODIFICATION CODES
TYPE
CDL 2A 139 F0P *- --
TYPE
CONTACT ARRANGEMENT
CONTACT STYLE
MODIFICATION CODES
RoHS
COMPLIANCE
R
Plug
2.344 (59.54)
± .005 (0.13)
.625 (15.88)
± .010 (0.25)
.260 (6.60)
± .010 (0.25)
.540 (13.72)
MAX.
.150 (3.81)
± .010 (0.25)
2.025 (51.44)
MAX.
Plug Receptacle
SILICONE
SEAL RING
CONTACT
HEIGHT
.035 (0.89)
.015 (0.38)
2.625 (66.68)
.560 (14.22)
MAX.
CAVITY #1
.625 (15.88)
± .010 (0.25)
.175 (4.44) MAX.
CONTACT
HEIGHT
.065 (1.65)
.045 (1.14)
.535
(13.59)
MAX.
.150 (3.81)
± .010 (0.25)
2.025 (51.44) MAX.
CAVITY #1
Recommended Panel Cutouts
.125 (3.18)
DIA. TYP.
.565 (14.35)
± .005 (0.13)
.2035 (51.69)
± .016 (0.41) .063 (1.60)
RAD. MAX.
2.344 (59.54)
± .005 (0.13)
Contact Arrangements
Plug Receptacle
CAVITY #1 CAVITY #1
CAVITY #70
Engaging Face View
CAVITY #70
CAVITY #117 CAVITY #117
CAVITY #92
CAVITY #92
CAVITY #139 CAVITY #139
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Strip Connectors - .100"/.075" Contact Spacing CTA
Components and Accessories
66
www.ittcannon.com
CENTI-LOC connectors are low-cost nylon
strip connectors designed for commercial
applications such as instrumentation, commu-
nications, and medical equipment. They are
available in continuous strip form up to a max-
imum length of 6 inches (152.40mm), accom-
modating from 1 to 60 rear insertion, front
release, crimp snap-in size 22 CENTIPINTM/
CENTISOCKETTM contacts. These contacts
utilize a proven positive contact alignment
design, giving additional contact strength and
positive contact alignment during mating.
These connectors can be ordered in kit or bulk
form. The kit comprises all the parts necessary
to assemble one complete 6-inch (152.40) strip
connector with 60 contacts on .100 (2.54) cen-
ters or a 4-inch (101.60mm) strip with 53 con-
tacts on .075 (1.91) centers. If more then one
connector is required, the parts can be ordered
in bulk and assembled as desired.
The CENTI-LOC strip connector can be ordered in
kit or bulk form. The kit includes matin g insulators
with a full compliment of contacts and two guide
posts. If more than one connector is required, the
parts can be ordered in bulk and assembled as
desired.
The guide posts and polarizing posts are inserted in the same manner as the contacts. The guide
posts are inserted into the socket insulator and the polarizing posts are inserted into the pin
insulator. The corresponding contact in the mating insulator must be removed for each.
See assembly instructions.
Kit Form
Insulator
Part
Number
CTA3-KIT
CTA4-KIT
CTA3-CTA4-KIT
Part
Number
Contact
Center
Spacing Type Material
CTA3-IP-53
CTA3-IS-53
CTA4-IP-60
CTA4-IS-60
CTA-GP
CTA-PP
.075 (1.91)
.075 (1.91)
.100 (2.54)
.100 (2.54)
Pin
Socket
Pin
Socket
P/N 230-9507-000
P/N 230-9506-000
Nylon
Nylon
Nylon
Nylon
Passivated Stainless Steel
Passivated Stainless Steel
Insulator
Guide Post
Polarizing Post
.075 (1.91)
.100 (2.54)
.075 (1.91) & .100 (2.54)
Contact
Center spacing Guide Posts
Polarizing Posts
.475 (12.06)
MAX.
.275 (6.98)
MAX.
Kits include mating insulators with full
complement of contacts and two guide posts.
Dimensional Data
Weights
CTA3-.075(1.91) Centers CTA4-.100(2.54) Centers
4.031 (102.39)
MAX.
.040 (1.02) MIN. .040 (1.02) MIN.
.115 (2.92)
MAX.
.115 (2.92)
MAX.
.100 (2.54)
TYP.
6.031 (153.19)
MAX.
.075 (1.91)
TYP.
Part
Number
No. of
Contacts
Contacts
Type
Avy. Weight
oz.
± 5%
gm.
pin
socket
pin
socket
.185
.203
.230
.241
5.25
5.75
6.30
6.90
CTA3
CTA4
53
60
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
67
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
The Centi Line - .075" Contact Spacing 2D/CTA
Contacts
Aresilient internal shoulder retains the contacts in the
insulator housing. The front of the contact is chamfered
to prevent damage to the internal shoulder as the
contact is pushed into position.
Subtract .064 (1.63) +_ .010 (.25) from pigtail
length when used in 2D pin insulator for potting
well of connector assembly.
Subtract .081 (2.08) +_ .010 (.25) from pigtail
length when used in 2D socket insulator for
potting well of connector assembly.
Contact Part Number
Part Number
Pin
031-9540-000
031-9540-004
031-9540-005
030-9542-001
030-9542-002
030-9542-004
Standard 30µin. plating
50µin. plating
50µin. plating
NOTE: Plating,except as noted,is 30 micro-inch gold.
Consult factory for any tail size or plating requirements.
Special crimp locator required. Part number: 995-0001-714. (L3198-CL-PSL)
Use special insertion tip (323-9510-016 &-017).
*
**
***
With inspection hole;
50µin. plating
P.C. tail
.026 dia. x.083 lg. Soc.
N/A 030-9542-011
P.C. tail
.020 dia. x
030-9542-012
Long crimp
barrel **
030-9542-014
Small crimp bore
For AWG #32 &30
030-9556-000
***
Small crimp bore
For AWG #28 &30
030-9542-022
.183 lg. Soc.
.183 lg. Pin
P.C. tail
.020 dia. x
030-9542-015
P.C. tail
.018 dia. x
030-9542-016
*031-9540-013
031-9540-016
031-9540-022
***
031-9540-007
*031-9540-015
*031-9540-019
.232 lg. Soc.
.255 lg. Pin
.444 lg. Soc.
.445 lg. Pin
Socket TypePin Socket
P.C. TailContacts
2D and Centi-Loc Crimp and Assembly Tools
Insertion Tools For Standard Contact
Insertion Tools For Long Crimp barrel Contacts
Extraction Tools
Tool
M22520/2-01
CIET-CTA
Handle
CTA-AB
Assembly Holding
Block
Part Number: 328-9508-000
Socket Extraction
Tip
Pin Extraction
Tip
Insertion Tips
Description
Part Number
AWG
Size*
22
24
26
28
30/P.C. Tail
AWG
Size*
Tip Part Number ***
Pin Contact
Tip Part Number ***
Socket Contact
22
24
26
Contact
CENTIPIN
CENTISOCKET
Description
CET-P-CTA-2
CET-S-CTA-1
Kit Part Number
(handle and tip)
Tip Part
Number
Handle Part
Number
070112-0002
070113-0001
324-9502-000
324-9501-000
204-9500-000
204-9500-000
Handle
Part Number***
204-9500-000
204-9500-000
204-9500-000
323-9510-008
323-9510-009
323-9510-010
323-9510-012
323-9510-013
323-9510-014
Based on wire size per MIL-W-16878 with Type E insulation, use smaller tool for wire with thin
insulation, larger tool for wire having thick insulation.
The 5 insertion tips (part numbers 323-9510-001 thru - 005). plus handle, and the pin and socket
extaction tips maybe ordered as a SINGLE KIT by specifying the part number CIET-CTA-2.
[Part number: 070143-0002].
*
**
To order the SINGLE KIT for the long crimp barrel contact (tip part numbers 323-9510-008 thru
-014, handle and pin and socket extraction tips) please specify CIET-CTA-3.
***
CIT-PS-CTA-22
CIT-PS-CTA-24
CIT-PS-CTA-26
CIT-PS-CTA-28
CIT-PS-CTA-30
323-9510-001
323-9510-002
323-9510-003
323-9510-004
323-9510-005
204-9500-000
204-9500-000
204-9500-000
204-9500-000
204-9500-000
Kit Part Number
(handle and tip)
Tip
Part Number**
Handle
Part Number**
M22520/2-01
995-0001-584
L3198-CLP
995-0001-338
L3198-CLS
995-0001-353
Pin Socket
Locators
The Centi Line - .075" Contact Spacing 2D/CTA
2D/CTA CENTI-LOCTM Connectors Assembly Instructions
68
www.ittcannon.com
The Double Density D/CTA CENTI-LOC Connectors
are highly reliable and simple connectors to use.
There are a few helpful suggestions that will assure
complete satisfaction when followed:
1. The following instructions should be followed.
2. The proper crimp tool and locator (if required)
must be used. These tools have been designed
for use with this product. Substitutions of crimp-
ing equipment may result in connector failure at
the assembly operation.
3. After crimping a contact to a lead it is of vital
importance that the proper tool be used to assure
seating the contact in the insulator in the proper
position. Any substitution of insertion tools may
result in over or under insertion of the contact
which may damage the retention system of the
insulator.
4. The female (socket) side of the connector has
been designed with a controlled float to allow for
ease of mating. To avoid reducing this float or
causing a splaying of the contacts, any unneces-
sary strain caused by clamping the leads too
close to the rear of the connector should be
avoided.
Use of recommended tooling together with proper
assembly techniques will pay dividends in reliability
and reduced costs.
2D Assembly Instructions
Cut the wires to length required and strip .100" of
insulation from the end to be crimped. Check for
cut or broken wires and frayed insulation.
Using the proper crimp tool and locator, insert the
contact into the locator. Insert the stripped end of the
wire into the contact crimp pot, and crimp the contact to
the wire. Squeeze the handles firmly to insure a proper
crimp (tool will not release if crimping is incomplete).
NOTE: Contact stop must be changed in tool locator
when crimping pin and socket contacts.
1. Placethe properinsertion tip in the
insertion/-extraction handle and put the tip over the
wire as shown. The tool tip will butt up against the
crimppot.Connectormust be firmlysupported
duringbothinsertion andextractionoperations.
2. Using a firm, steady pressure, push the contact into
the cavity until the resilient internal shoulder in the
insulator snaps into the locking groove in the contact.
The shoulder of the tool tip bottoms against the rear
of the insulator, preventing over-insertion. Repeat for
balance of contacts.
1. For contact extraction, remove the insertion tool
tip and replace it with the proper extraction tool tip.
(The socket tip will fit into the socket, and the pin
tip will slide over the pin bundle). Insert the tool tip
into the contact cavity: (the pin tip will butt up
against the shoulder of the pin contact, and the
socket tip will bottom out in the socket contact.)
2. Apply a firm, steady pressure until the contact is
released from the internal shoulder in the insulator. The
shoulder of the tool tip bottom against the insulator
face to prevent damage to the internal shoulder.
Remove the tool tip and pull the contact from the rear
of the connector. Repeat for the balance of contacts to
be removed.
WIRE STRIPPING
.100
(2.54)
CONTACT INSERTION
CONTACT EXTRACTION
CONTACTCRIMPING
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
69
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
The Centi Line - .075" Contact Spacing 2D/CTA
CTA Assembly Instructions
.275 (6.98)
MAX.
.475 (12.06)
MAX.
INSERTION
Guide Posts
Polarizing Posts
1. Place the connector into the slot in the assembly block
with the arrows on the insulator pointing downward. The
connector will bottom against the internal shoulder in the
groove in the assembly block. Start contact insertion by
placing the crimped contact in the cavity by hard.
3. With firm steady pressure, push the contact into the
cavity until the resilient internal shoulder snaps into the
locking groove in the contact. To prevent over insertion,
the tool tip bottoms against the rear of the insulator.
4. The guide post and polarizing posts are inserted in teh
same manner as the contacts. The guide posts are inserted
into the socket insulator, and the polarizing posts are
inserted into the pin insulartor. The corresponding contact
in the mating insulator must be removed for each.
2. Position the insertion tool tip on the rear of contact as
shown. The insulation must be pulled back from the crimp
pot approximately 1/32" to allow the tool tip to butt
against the contact crimp pot.
EXTRACTION
1. To extract the contacts, place the conector face up in
the assembly block so that the contact to be extracted is
in the end of the block that has a fully slotted opening.
2. The pin extraction tool tip is tubular, slides over the pin
bundle and butts against the front shoulder of the pin. The
socket extraction tool is a solid rod that fits into the socket
contact, the external shoulder butts against the contact
socket shoulder.
3. Insert the extraction tool into the cavity and apply firm
pressure until the contact is pushed thru the rear of the
connector.
4. Lift the insulator from the groove and pull the contact
out. Repeat for balance of contacts to be removed.
The NANO Line - .025" Contact Spacing
Specifications
70
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Contact Rating - 1 amp max.
Minimum contact centers - 0.025 (0.64).
Wire sizes - #32 AWG stranded, #30 AWG solid.
Contact termination - integral pigtail or multiple indent crimp.
Contact rentention - fixed via epoxy.
Contact materials - socket: nickel silver.
pin bundle: precious metal alloy or BeCu.
pin Sleeve: nickel silver or cartridge brass.
Type Single Row
Strip
NTP NDM NJS NJSC
Metal Shell
Rectangular
Rectangular
Center Jackscrew
Alum. alloy
2024 T351 per
QQ-A-250 or
6061-T6 per
QQ-A-200
nickel plate
Phenolic Phenolic Polyester
- Precious metal per ASTM B477 and ASTM B541, or BeCu per CDA alloy 172 & 102 -
- Nickel silver/ASTM B122, Comp. B-
- Nickel silver per ASTM B122, Comp. B or Cartridge Brass per CDA alloy 260 -
1-40
Contacts
9, 15, 21, 25
31, 37
9, 24, 44
Circular
Center Jackscrew
Polyester
27, 72, 266
Shell
Insulator
No. of Contacts
Pin Bundle
Material
Socket Sleeve
Material
Pin Sleeve
Material
• Mating/unmating force - 6oz. per contact max.
Test Data
30 milliohms maximum
80 milliohms maximum
The table below summarizes the results of key tests
performed in accordance with MIL-STD-202, where
applicable. Data is applicable to standard connec-
tor with standard terminations. Variations may
affect this data, so please consult the factory for
further information on your requirements.
Dielectric Withstanding
Voltage
Method 301:
350 VAC at sea level
100 VAC at 70,000' altitude
Method 302, Condition A
Insulation Resistance
Thermal Shock
Physical Shock
Vibration
Durability
Moisture Resistance
Salt Spray
Contact Resistance
Contact Retention
Method 107, Condition B:
-65˚C to +125˚C
Method 213, Condition I:
100 G's, 3-axes, 6 millisecond
duration sawtooth pluse
Method 204, Condition D:
15 G's, 10-2,000 Hz, 12 hours
500 cycles of mating and
unmating, 500 CPH max.
Method 106, omit 7b
Method 101, Condition B:
48 hours
Method 307:
At 1 amp
At 100 milliamps
-
No breakdown
No breakdown
5,000 megohms minium
No physical damage
No physical damge
No loss of continuity > 1 µ sec
No physical damge
No loss of continuity > 1 µ sec
No mechanical or electrical defect
Insulation resistance > 100 megohms
Shall be capable of mating and unmating,
and meet contact resistance requirements
With gold plated Be-
Cu Nanopin contact.
With precious metal
alloy Nanopin contact.
}
}
60 milliohms maximum
3 lb. minimum axial load
Test Method Criteria of Acceptance
NANO contacts incorporate the highly reli-
able Twist Pin concept, which allows conti-
nuity in very dense areas and under severe
shock and vibration, requiring low engage-
ment and separation forces. Termination
can consist of uninsulated pigtails or insu-
lated wire all pre-harnessed at our factory
to your specifications.
Due to various industry application require-
ments the NANO line is available in several
different configurations, available in strip,
metal shell and plastic, rectangular or cir-
cular configurations with center jackscrew.
Successful applications for NANO connec-
tors are many and varied, from the Air
Force's AIRS program to actual human
implantations in the medical research field.
71
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
Strip Connectors - .025" Contact Spacing NT
How to Order - NT
SERIES
NT P 2 40 S H * * *
SERIES
Nano Strip
40 Maximum - .025 (0.64) centers
20 Maximum - .050 (1.27) centers
L- Solid uninsulated wire
T- One piece contact/lead
H- Insulated harness wire
For termination code, see NJS section,
page 73.
P- Pin (Plug)
S- Socket (Receptacle)
P- Phenolic
1 - Contacts on .025 (0.64) centers
2 - Contacts on .050 (1.27) centers
INSULATOR MATERIAL
CONTACT LOCATION
INSULATOR MATERIAL
CONTACT LOCATION
CONTACT ARRANGEMENTS
CONTACT ARRANGEMENTS
CONTACT TYPE
CONTACT TYPE
TERMINATION TYPE
MODIFICATION CODE
MODIFICATION CODE
TERMINATION MODIFICATION
RoHS COMPLIANCE
R
Dimensions
NTP
B
.025 (0.64) TYP.
A
.055
(1.40)
MAX. B
.055
(1.40)
MAX.
.055
(1.40)
MAX.
B
.025 (0.64) TYP.
A
.080
(2.03)
.160
(4.06)
MAX.
A
.025 (0.64) TYP.
.220
(5.59)
MAX.
Plug - "H" and "L"
Termination Types Plug - "T"
Termination Types Receptacle - "H", "L", and "T"
Termination Types
NTPI-1*-**
NTPI-2*-**
NTPI-3*-**
NTPI-4*-**
NTPI-5*-**
NTPI-6*-**
NTPI-7*-**
NTPI-8*-**
NTPI-9*-**
NTPI-10*-**
NTPI-11*-**
NTPI-12*-**
NTPI-13*-**
NTPI-14*-**
NTPI-15*-**
NTPI-16*-**
NTPI-17*-**
NTPI-18*-**
NTPI-19*-**
NTPI-20*-**
NTPI-21*-**
NTPI-22*-**
NTPI-23*-**
NTPI-24*-**
NTPI-25*-**
NTPI-26*-**
NTPI-27*-**
NTPI-28*-**
NTPI-29*-**
NTPI-30*-**
NTPI-31*-**
NTPI-32*-**
NTPI-33*-**
NTPI-34*-**
NTPI-35*-**
NTPI-36*-**
NTPI-37*-**
NTPI-38*-**
NTPI-39*-**
NTPI-40*-**
-
.025 (0.64)
.050 (1.27)
.075 (1.91)
.100 (2.54)
.125 (3.18)
.150 (3.81)
.175 (4.45)
.200 (5.08)
.225 (5.72)
.050 (1.27)
.075 (1.91)
.100 (2.54)
.125 (3.18)
.150 (3.81)
.175 (4.45)
.200 (5.08)
.225 (5.72)
.250 (6.35)
.275 (6.99)
.250 (6.35)
.275 (6.99)
.300 (7.62)
.325 (8.26)
.350 (8.89)
.375 (9.53)
.400 (10.16)
.425 (10.80)
.450 (11.43)
.475 (12.07)
.300 (7.62)
.325 (8.26)
.350 (8.89)
.375 (9.53)
.400 (10.16)
.425 (10.80)
.450 (11.43)
.475 (12.07)
.500 (12.70)
.525 (13.34)
.500 (12.70)
.525 (13.34)
.550 (13.97)
.575 (14.61)
.600 (15.24)
.625 (15.88)
.650 (16.51)
.675 (17.15)
.700 (17.78)
.725 (18.42)
.550 (13.97)
.575 (14.61)
.600 (15.24)
.625 (15.88)
.650 (16.51)
.675 (17.15)
.700 (17.78)
.725 (18.42)
.750 (19.05)
.775 (19.69)
.750 (19.05)
.775 (19.69)
.800 (20.32)
.825 (20.96)
.850 (21.59)
.875 (22.23)
.900 (22.86)
.925 (23.50)
.950 (24.13)
.975 (24.77)
.800 (20.32)
.825 (20.96)
.850 (21.59)
.875 (22.23)
.900 (22.86)
.925 (23.50)
.950 (24.13)
.975 (24.77)
1.000 (25.40)
1.025 (26.04)
B
±.010 (0.25)
A
Ref.
Part Number
by Insulator Size
A
Ref.
Part Number
by Insulator Size
A
Ref.
Part Number
by Insulator Size
A
Ref.
Part Number
by Insulator Size
B
±.010 (0.25)
B
±.010 (0.25)
B
±.010 (0.25)
NANO D Metal Shell - .025" Contact Spacing NDM
How to Order - NDM
72
www.ittcannon.com
SERIES
SERIES
9, 15, 21, 25, 31, 37
NDM - NANO D Metal Shell
P = Pin (Plug)
S = Socket (Receptacle)
H= Insulated harness wire
L= Solid copper
T = One piece contact/lead
To specifiy lead lengths, type and mechanical
modifications consult customer service.
CONTACT ARRANGEMENTS
CONTACT ARRANGEMENTS
CONTACT TYPE
CONTACT TYPE
TERMINATION TYPE
TERMINATION TYPE
MODIFICATION CODE
MODIFICATION CODE
NDM- 9 P T * *
RoHS COMPLIANCE
R
Dimensions
D
D
A
B
C
C
.025 (0.64) TYP.
.025 (0.64) TYP.
A
B
Plug
Receptacle
.130
(3.30) MAX
.150 (3.81)MAX.
.150 (3.81)MAX.
.155 (3.94) MAX.
.051 +_ .004
(1.30+_ 0.10)
.083 +_ .004
(2.11 +_ 0.10)
DIA.TYP.
.083 +_ .004
(2.11 +_ 0.10)
DIA.TYP.
.004 +_ .004
(1.12+_ 0.10)