Results: 1 - 10 of 11

Selected Filters

Selected Category: Interconnect, Wire Remove Connectors, Interconnects Remove Rectangular Connectors Remove Headers - Male Pins Remove 0.047" (1.20mm) ~ 0.071" (1.80mm) Pitch Remove
Selected Suppliers: Techflex Remove Amphenol LTW Remove Omron Electronics Inc-EMC Div Remove Würth Elektronik Remove Infineon Technologies Remove Sensata-BEI Sensors Remove Adafruit Industries LLC Remove

Mini SWD 0.05" Pitch Connector - 10 Pin SMT Box Header

Supplier: Adafruit Industries LLC

Subtitle: 4048 - Mini SWD 0.05" Pitch Connector - 10 Pin SMT Box Header
Description: This 1.27mm pitch 2x5 Mini SWD 0.05" Pitch Connector is a smaller sized version of the Box Header used on the SWD Cable Breakout Board. Instead of a full shroud, there's a half-shroud with a key-notch. It'll takes a lot less space on your board. The header alone is great if you want to incorporat...

Category: Interconnect, WireConnectors, InterconnectsRectangular ConnectorsHeaders - Male Pins0.047" (1.20mm) ~ 0.071" (1.80mm) Pitch

XH5-N Series

Supplier: Omron Electronics Inc-EMC Div

Subtitle: 0.050" (1.27mm) Pitch, Surface Mount, Surface Mount Right Angle
Description:

Category: Interconnect, WireConnectors, InterconnectsRectangular ConnectorsHeaders - Male Pins0.047" (1.20mm) ~ 0.071" (1.80mm) Pitch

WR-PHD 1.27mm Though Hole Dual Pin Headers

Würth Elektronik 62201021121

Supplier: Würth Elektronik

Subtitle: 0.050" (1.27mm) Pitch Through Hole Connector Headers
Description: 4 to 28 position headers, unshrouded.

Category: Interconnect, WireConnectors, InterconnectsRectangular ConnectorsHeaders - Male Pins0.047" (1.20mm) ~ 0.071" (1.80mm) Pitch

WR-WTB 0.049" (1.25mm) SMT Male Horizontal Shrouded Header

Würth Elektronik WR-WTB 0.049" (1.25mm) SMT Male Horizontal Shrouded Header

Supplier: Würth Elektronik

Subtitle: WR-WTB 0.049" (1.25mm) SMT Male Horizontal Shrouded Header
Description: WR-WTB Series connectors

Category: Interconnect, WireConnectors, InterconnectsRectangular ConnectorsHeaders - Male Pins0.047" (1.20mm) ~ 0.071" (1.80mm) Pitch