USD

Results: 1 - 10 of 18

Selected Filters

Selected Category: RF/IF and RFID Remove RF Receivers Remove
Selected Suppliers: Maxim Integrated Remove CML Microcircuits Remove Analog Devices Inc. Remove

AD6688BBPZ

Analog Devices Inc. AD6688BBPZ-3000

Supplier: Analog Devices Inc.

Subtitle: RF Diversity and 1.2GHz BW Observation Receiver
Description: The AD6688 is a 1.2 GHz bandwidth, mixed-signal, direct radio frequency (RF) sampling receiver. It consists of two 14-bit, 3.0 GSPS analog-to-digital converters (ADCs) and various digital signal processing blocks consisting of four wideband digital downconverters (DDCs). The AD6688 has an on-chip...

Category: RF/IF and RFIDRF Receivers

HMC6301

Analog Devices Inc. HMC6301BG46

Supplier: Analog Devices Inc.

Subtitle: Millimeterwave Receiver, 57GHz to 64GHz
Description: The HMC6301 is a complete millimeterwave receiver integrated circuit in a 6 mm × 4 mm, RoHS compliant, wafer level ball grid array (WLBGA) that includes a low noise amplifier (LNA), an image reject filter, an RF to IF downconverter, an IF filter, and I/Q downconverter, and a frequency synthesizer...

Category: RF/IF and RFIDRF Receivers

HMC8100LP6JE

Analog Devices Inc. HMC8100LP6JE

Supplier: Analog Devices Inc.

Subtitle: Intermediate Frequency Receiver, 800MHz to 4000MHz
Description: The HMC8100LP6JE is a highly integrated intermediate frequency (IF) receiver chip that converts radio frequency (RF) input signals ranging from 800MHz to 4000MHz down to a single-ended intermediate frequency (IF) signal of 140MHz at its output. The IF receiver chip is housed in a compact 6mm × 6m...

Category: RF/IF and RFIDRF Receivers

LT5500

Analog Devices Inc. LT5500EGN#PBF

Supplier: Analog Devices Inc.

Subtitle: 1.8GHz to 2.7GHz Receiver Front End
Description: The LT® 5500 is a receiver front end IC designed for low voltage operation. The chip contains a low noise amplifier (LNA), a Mixer and an LO buffer. The IC is designed to operate over a power supply voltage range from 1.8V to 5.25V. The LNA can be set to either high gain or low gain mode. At 2.5G...

Category: RF/IF and RFIDRF Receivers

CMX992

CML Microcircuits CMX992Q3

Supplier: CML Microcircuits

Subtitle: RF Quadrature Low IF Receiver
Description: The CMX992 is a single-chip, high performance, RF receiver that includes the core RF and IF receive functions of the CMX991 above and can be used in a wide range of narrowband and wideband wireless products, including multi-mode analogue/digital terminals.

Category: RF/IF and RFIDRF Receivers

CMX994

CML Microcircuits CMX994

Supplier: CML Microcircuits

Subtitle: RF Direct Conversion Receiver IC
Description: The CMX994/A/E offer exceptional blocking performance, typical values are in the range 98dB to 102dB depending on the measurement method. All three devices include a broadband LNA with gain control followed by a high dynamic range, very high IIP2, I/Q demodulator. The receiver baseband section in...

Category: RF/IF and RFIDRF Receivers

MAX1470

Maxim Integrated MAX1470EUI+

Supplier: Maxim Integrated

Subtitle: 315MHz Low-Power, 3V Superheterodyne Receiver
Description: The MAX1470 is a fully integrated low-power CMOS superheterodyne receiver for use with amplitude-shift keyed (ASK) data in the 315MHz band. With few required external components, and a low-current power-down mode, it is ideal for cost- and power-sensitive applications in the automotive and consum...

Category: RF/IF and RFIDRF Receivers

MAX1471

Maxim Integrated MAX1471ATJ+

Supplier: Maxim Integrated

Subtitle: 315MHz/434MHz Low-Power, 3V/5V ASK/FSK Superheterodyne Receiver
Description: The MAX1471 low power, CMOS, superheterodyne, RF dual-channel receiver is designed to receive both amplitude shift keyed (ASK) and frequency shift keyed (FSK) data without reconfiguring the device or any time delay normally associated with changing modulation schemes.

Category: RF/IF and RFIDRF Receivers

MAX1473

Maxim Integrated MAX1473

Supplier: Maxim Integrated

Subtitle: 315MHz/433MHz ASK Superheterodyne Receiver with Extended Dynamic Range
Description: The MAX1473 fully integrated low-power CMOS superheterodyne receiver is ideal for receiving amplitude shift- keyed (ASK) data in the 300MHz to 450MHz frequency range. Its signal range is from -114dBm to 0dBm. With few external components and a low-current power-down mode, it is ideal for cost- an...

Category: RF/IF and RFIDRF Receivers

MAX2112

Maxim Integrated MAX2112

Supplier: Maxim Integrated

Subtitle: Complete, Direct-Conversion Tuner for DVB-S2 Applications
Description: The MAX2112 direct-conversion tuner IC is designed for satellite set-top and VSAT applications. The IC is intended for 8PSK and Digital Video Broadcast (DVB-S2) applications. The MAX2112 directly converts the satellite signals from the LNB to baseband using a broadband I/Q down converter. The ope...

Category: RF/IF and RFIDRF Receivers