Results: 1 - 7 of 7

Selected Filters

Selected Category: Optoelectronics Remove Display Modules Remove LCD, OLED, Graphic Remove
Selected Suppliers: ON Semiconductor Remove DFRobot Remove SparkFun Electronics Remove

2.2” TFT LCD Display V1.0 (SPI Interface)

DFRobot DFR0529

Supplier: DFRobot

Subtitle: 2.2” TFT LCD Display V1.0 (SPI Interface) DFR0529
Description: This is a 2.2” TFT LCD Display Module with an input voltage of 3.3V~5.5V, which is used to display colorful patterns and characters. The fastest screen refresh speed is about 256ms. The module can display multiple patterns in a cycle and realize dynamic display effect. At present, there are 19 co...

Category: OptoelectronicsDisplay ModulesLCD, OLED, Graphic

5'' 800 x 480 TFT Raspberry Pi DSI Touchscreen(Compatible with Raspberry Pi 3B/3B+)

Supplier: DFRobot

Subtitle: DFR0550 - 5'' 800 x 480 TFT Raspberry Pi DSI Touchscreen(Compatible with Raspberry Pi 3B/3B+)
Description: This is a 5" Raspberry Pi LCD touchscreen with 800 x 480 resolution and 108×64.8mm display area. The product supports Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points. The special holes design on the back of the screen is conveni...

Category: OptoelectronicsDisplay ModulesLCD, OLED, Graphic

5.5" 1920x1080 mini-HDMI OLED Display with Capacitive Touchscreen

Supplier: DFRobot

Subtitle: DFR0524 - 5.5" 1920x1080 mini-HDMI OLED Display with Capacitive Touchscreen
Description: This is a 5.5" mini-HDMI OLED-Display with Capacitive Touchscreen. It has 1920×1080 HDMI high-definition output and comes with a capacitive touch panel on its screen. The touch panel supports multi-touch which can simultaneously identify 5 touch points at most. Besides, the USB touchscreen adopts...

Category: OptoelectronicsDisplay ModulesLCD, OLED, Graphic

7'' HDMI Display with Capacitive Touchscreen

DFRobot DFR0506

Supplier: DFRobot

Subtitle: DFR0506 - 7'' HDMI Display with Capacitive Touchscreen
Description: This is a 7 HDMI display with capacitive touchscreen. It comes with a 7" LCD screen with capacitive touch panel overlay on it. The touch panel supports up to 5 touch points. And it adopts DFRobot USB free-driver technology, no special requirement of drivers. You can use it as easy as keyboard or ...

Category: OptoelectronicsDisplay ModulesLCD, OLED, Graphic

Flexible Grayscale OLED Breakout - 1.81"

SparkFun Electronics LCD-14606

Supplier: SparkFun Electronics

Subtitle: LCD-14606 - Flexible Grayscale OLED Breakout - 1.81"
Description: The Flexible Grayscale OLED Breakout is pretty much exactly what the name says it is: a small grayscale OLED that can be bent up to a 40mm radius without any worry of damage. Attached to a controller board, the actual display is less than 0.5mm thick and can display some impressive graphics (incl...

Category: OptoelectronicsDisplay ModulesLCD, OLED, Graphic

Graphic LCD 84x48 - Nokia 5110

SparkFun Electronics LCD-10168

Supplier: SparkFun Electronics

Subtitle: LCD-10168 Graphic LCD 84x48 - Nokia 5110
Description: The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen. This one is mounted on an easy to solder PCB. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS LCD controller/...

Category: OptoelectronicsDisplay ModulesLCD, OLED, Graphic

Micro OLED Breakout

SparkFun Electronics LCD-13003

Supplier: SparkFun Electronics

Subtitle: LCD-13003 Micro OLED Breakout
Description: The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next Arduino project,...

Category: OptoelectronicsDisplay ModulesLCD, OLED, Graphic