USD
Print Print this page
 
Kinetic Technologies
STDP2650 Reference Design 3 Board
Kinetic Technologies
STDP2690 Reference Design 5 Board
 
Kinetic Technologies
STDP4020 Reference Design 1 Board
  • Images

STDP2690 Reference Design 5 Board

RD5-2690 DisplayPort to Dual Mode TX Reference Design 5 Board

Kinetic Technologies

The STDP2690 is the latest generation DisplayPort converter series product that features a DisplayPort1.2 compliant receiver and DisplayPort dual mode transmitter technology that supports both DisplayPort and TMDS signal formats. The DisplayPort receiver and transmitter supports HBR2 speed, a data rate of 5.4 Gbps per lane with a total bandwidth of 21.6 Gbps link rate. In addition, the DisplayPort transmitter is capable of supporting HDMI or single link DVI output through a passive level translator (dongle). When configured as HDMI output, this device supports link rate up to 2.97 Gbps that corresponds to a pixel rate of 297MHz, adequate for supporting video resolution up to FHD 120Hz with all 3D formats.

Product Description

The STDP2690 RD5 board is intended for the product evaluation and testing. The board contains a standard DP input connector, a standard DP++ output connector and a micro USB connector for powering. It also includes an SPI flash for storing the firmware, a UART connector for debugging and In-system programming purpose (firmware download) and an I²C slave interface to configure the device from an external host controller (optional).

Specifications
  • Function:Video Processing
  • Primary Attributes:DisplayPort to DisplayPort++
  • Supplied Contents:Board(s)
  • Type:Video
  • Utilized IC / Part:STDP2690
Parts
Associated Product
Kinetic Technologies Video Processing
Category: Semiconductors, Development Tools-Integrated Circuits (ICs)-Linear-Video Processing