Print Print this page
Walsin Technology Corporation
Winchester Interconnect
F Type, V-Bite® Series
Winchester Interconnect
  • Images

F Type, V-Bite® Series

V-Bite® PC Edge Mount F Type Coaxial Connectors

Winchester Interconnect

Winchester Interconnect Products' V-Bite® RF edge mount connectors are designed specifically to provide unsurpassed signal integrity in the most demanding RF applications. Boasting an extremely low profile (half the connector’s diameter) and small footprint, the V-Bite® series jacks share the same footprint allowing them to be interchangeable.

Product Training Modules:
Product Description

The engineering of this series provides the utmost in anti-rotation abilities to ensure the stability and reliability of the connection. The devices notably snap and lock in place for secure PCB retention during hand or reflow soldering. Furthermore, the parts are supported from both above and below the board to disperse rotational torque relief to the board, consequently minimizing stress on the solder area.

F style connectors are general purpose connectors with non-constant impedance for use at 500 volts or less, and for use with low frequencies to 500Mhz.

  • Cable TV
  • MATV
  • CCTV
  • Body Finish:Nickel
  • Body Material:Brass
  • Cable Group:RG-6, 59
  • Center Contact Material:Brass
  • Center Contact Plating:Gold
  • Connector Style:F Type
  • Connector Type:Jack, Female Socket
  • Contact Termination:Solder
  • Dielectric Material:Polytetrafluoroethylene (PTFE)
  • Fastening Type:Threaded
  • Frequency - Max:3GHz
  • Housing Color:Silver
  • Impedance:75Ohm
  • Mating Cycles:500
  • Mounting Type:Board Edge, End Launch
  • Number of Ports:1
  • Operating Temperature:-40°C ~ 65°C
  • Shield Termination:Solder
  • Voltage Rating:500V