Stacking Connector Jumpers and Assemblies
Cinch Connectivity Solutions
CIN::APSE® stacking connector jumpers are short flex PCB assemblies that are used for coplanar and right angle board to board connections. The jumpers in combination with the CIN::APSE® stacking connectors and hardware provide a full board to board connect system.
This system allows rigid-flex-rigid PCB designs to be segmented. By segmenting the designs, modifications and repairs can be done without replacing the entire assembly. The flex PCB jumpers can be used in flat and formed shapes up to 90°. These jumpers are intended to be assembled with the 25 and 51 positions CIN::APSE® stacking connectors. A stacking connector should be attached at each end of the jumper. The open side of the stacking connectors are then mounted to rigid PCBs. The flex jumpers can be customized for length, pin out and be impedance controlled for the application.
- Cable Type:FFC, FPC
- Length:3.000" (76.20mm)
- Length - Exposed Ends:0.131" (3.33mm)
- Number of Conductors:25 ~ 51
- Pitch:0.025" (0.64mm)
- Termination Style:Top on Both Sides, Backers on Both Sides
|4631533093||CIN::APSE STACKING CONNECTOR JUM||FFC, FPC||25||0.025" (0.64mm)||3.000" (76.20mm)|
|4631533094||CIN::APSE STACKING CONNECTOR JUM||FFC, FPC||51||0.025" (0.64mm)||3.000" (76.20mm)|