Print Print this page
RabbitFLEX™ BL300F Series
FTDI, Future Technology Devices International Ltd
C232HD Series
FTDI, Future Technology Devices International Ltd
C232HM Series
  • Images

C232HD Series

USB 2.0 Hi-Speed to UART Cable

FTDI, Future Technology Devices International Ltd

These cables have an optional power output capability with a maximum output current of 200 mA at their respective signal voltage level. The cables, which are 5.90' (1.80m) long, can cope with data transfer rates of up to 12 Mbaud.

  • Based on the single chip USB Hi-Speed FT232H device
  • USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible
  • Entire USB protocol handled on the chip – No USB-specific firmware programming required
  • USB Type A connector for direct connection to USB host or hub
  • USB bus powered
  • Asynchronous UART transfer data rate up to 12Mbaud
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
  • Fully assisted hardware or X-On / X-Off software handshaking
  • 1kByte receive and transmit buffers for high data throughput
  • Transmit and receive LEDs
  • Adjustable receive buffer timeout
  • Support for USB suspend and resume
  • Low operating and USB suspend current
  • Low USB bandwidth consumption
  • UHCI / OHCI / EHCI host controller compatible
  • -40°C to +85°C operating temperature range
  • Cable length is 1.8m (6 feet)
  • FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
  • Interfacing MCU / PLD / FPGA based designs to USB
  • USB Medical applications
  • Rapid USB integration into existing electronic systems
  • Prototyping platform for USB interface on systems
  • USB to RS232 / RS422 / RS485 Converters
  • USB Instrumentation
  • Set Top Box PC - USB interface
  • USB Digital Camera Interface
  • USB Hardware Modems
  • USB Wireless Modems
  • USB Bar Code Readers
  • USB Industrial Control
  • Upgrading Legacy Peripherals to USB
  • Convert From (Adapter End):USB-A (USB TYPE-A), Plug
  • Convert To (Adapter End):Single Pole, 10 Female Sockets
  • Length:5.90' (1.80m)
  • Usage:USB to UART

View in Parametric Search

C232HD-EDHSP-0C232HD-EDHSP-0CABLE USB HS UART 5V, 1.8M USB to UARTUSB-A (USB TYPE-A), PlugSingle Pole, 10 Female Sockets5.90' (1.80m)RoHS
C232HD-DDHSP-0C232HD-DDHSP-0CABLE USB HS UART 3.3V, 1.8M USB to UARTUSB-A (USB TYPE-A), PlugSingle Pole, 10 Female Sockets5.90' (1.80m)RoHS

View in Parametric Search