The Cyclone PRO is a stand-alone in-circuit programmer and debug interface for Freescale’s HC08, HCS08, HC(S)12(X), RS08, and ColdFire V1 architectures. The Cyclone is able to control a processor using the processor’s debug port, which allows the user to quickly debug code and program it onto the microcontroller. Communication with the PC occurs via Ethernet, USB, or Serial Port. Once the Cyclone is configured, programming operations may be completed with or without a PC.

Freescale - USBMULTILINK08E ISP
Freescale - USBMULTILINKBDME ISP
Freescale - M68CYCLONEPROE Programmer

The Phyton CHIPPROG-48 universal programmer can be effectively used for both engineering and low-volume manufacturing. It supports in-socket and in-system programming of thousand of devices and has no limitations in supporting future devices.

Xeltek's families of universal programmers and adapters, combined with unparalleled device, software and customer support, provide a complete range of solutions from engineering development through volume production.

Xeltek - SuperPro 5004GP Programmer

The ChipProg-ISP is a low-cost universal programmer specifically created for programming devices without removing them from the equipment where they are installed. The ChipProg-ISP supports serial EPROM and EEPROM flash memory devices and embedded microcontrollers with the code and data memory programmable via different types of serial ports: UART, JTAG, SPI and other types, including proprietary interfaces.

Freescale - USBMULTILINKBDME ISP
Freescale - M68CYCLONEPROE Programmer
Phyton - CHIPPROG Universal Programmer

The Phyton CHIPPROG-48 universal programmer can be effectively used for both engineering and low-volume manufacturing. It supports in-socket and in-system programming of thousand of devices and has no limitations in supporting future devices.

Phyton - CHIPPROG-40 Universal Programmer
Phyton - CHIPPROG-48 Universal Programmer
Phyton - CHIPPROG-G4 Universal Programmer

The Cyclone Pro is a stand-alone in-circuit programmer and debug interface for Freescale’s HC08, HCS08, HC(S)12(X), RS08, and ColdFire V1 architectures. The Cyclone is able to control a processor using the processor’s debug port, which allows the user to quickly debug code and program it onto the microcontroller. Communication with the PC occurs via Ethernet, USB, or Serial Port. Once the Cyclone is configured, programming operations may be completed with or without a PC.

Freescale - M68CYCLONEPROE Programmer

Xeltek's families of universal programmers and adapters, combined with unparalleled device, software and customer support, provide a complete range of solutions from engineering development through volume production.

Xeltek - SuperPro 5000 Programmer
Xeltek - SuperPro 5004GP Programmer

The Cyclone Pro is a stand-alone in-circuit programmer and debug interface for Freescale’s HC08, HCS08, HC(S)12(X), RS08, and ColdFire V1 architectures. The Cyclone is able to control a processor using the processor’s debug port, which allows the user to quickly debug code and program it onto the microcontroller. Communication with the PC occurs via Ethernet, USB, or Serial Port. Once the Cyclone is configured, programming operations may be completed with or without a PC.

Freescale - USBMULTILINKBDME ISP
Freescale - M68CYCLONEPROE Programmer

Xeltek's families of universal programmers and adapters, combined with unparalleled device, software and customer support, provide a complete range of solutions from engineering development through volume production.

Xeltek - SuperPro 5000 Programmer

The Cyclone Pro is a stand-alone in-circuit programmer and debug interface for Freescale’s HC08, HCS08, HC(S)12(X), RS08, and ColdFire V1 architectures. The Cyclone is able to control a processor using the processor’s debug port, which allows the user to quickly debug code and program it onto the microcontroller. Communication with the PC occurs via Ethernet, USB, or Serial Port. Once the Cyclone is configured, programming operations may be completed with or without a PC.

Freescale - USBMULTILINKBDME ISP
Freescale - M68CYCLONEPROE Programmer

The Phyton CHIPPROG-48 universal programmer can be effectively used for both engineering and low-volume manufacturing. It supports in-socket and in-system programming of thousand of devices and has no limitations in supporting future devices.

Xeltek - SuperPro 5000 Programmer
Phyton - CHIPPROG-40 Universal Programmer
Phyton - CHIPPROG-48 Universal Programmer
Phyton - CHIPPROG-G4 Universal Programmer

The Cyclone PRO is a stand-alone in-circuit programmer and debug interface for Freescale’s HC08, HCS08, HC(S)12(X), RS08, and ColdFire V1 architectures. The Cyclone is able to control a processor using the processor’s debug port, which allows the user to quickly debug code and program it onto the microcontroller. Communication with the PC occurs via Ethernet, USB, or Serial Port. Once the Cyclone is configured, programming operations may be completed with or without a PC.

Freescale - M68CYCLONEPROE Programmer

Xeltek's families of universal programmers and adapters, combined with unparalleled device, software and customer support, provide a complete range of solutions from engineering development through volume production.

Xeltek - SuperPro 5000 Programmer
Xeltek - SuperPro 5004GP Programmer