NXP Supplier Page

CBTL02042/43 CMOS Multiplexer/Demultiplexer Switches


NXP's switches support high-bandwidth systems while minimizing power consumption


NXP Semiconductors'CBTL02042A/B and CBTL02043A/B are two differential channel, 2-to-1 multiplexer/demultiplexer switches for PCI Express Gen2 (CBTL02042A/B) and Gen3 (CBTL02043A/B) or other high-speed serial interface applications. These devices can switch two differential signals to one of two locations. Using a unique design technique, NXP has minimized the impedance of the switch in such a way that the attenuation observed through the switch is negligible, and also minimized the channel-to-channel skew as well as channel-to-channel crosstalk, as required by the high-speed serial interface. These devices also allow expansion of existing high speed ports for extremely low power. These mux/demux switches are suitable for routing high-speed signals in applications with PCIe Gen2 (CBTL02042A/B), PCIe Gen 3 (CBTL02043A/B), DisplayPort 1.2, USB 3.0, and SATA 6 Gbit/s. NXP's CBTL02042/43 Switches

Features
  • Two bidirectional differential channel, 2:1 mux/demux
  • High-speed signal switching for PCIe Gen2: 5 Gbit/s (CBTL02042A/B) and Gen3: 8 Gbit/s (CBTL02043A/B)
  • Available in a very thin DHVQFN20 package
  • Low return loss
  • Shutdown pin (XSD) for power-saving mode
  • Low crosstalk
  • Low off-state isolation
  • High bandwidth

Digi-Key P/N Manufacturer P/N Packaging Description
568-6676-2-ND CBTL02042ABQ,115 Tape & Reel IC MUX/DEMUX 2:1 PCI 20DHVQFN CBTL02042 Datasheet
568-6676-1-ND Cut Tape
568-6676-6-ND Digi-Reel®
568-6677-2-ND CBTL02042BBQ,115 Tape & Reel IC MUX/DEMUX 2:1 PCI 20DHVQFN
568-6677-1-ND Cut Tape
568-6677-6-ND Digi-Reel®
568-6678-2-ND CBTL02043ABQ,115 Tape & Reel IC MUX/DEMUX 2:1 PCI 20DHVQFN CBTL02043 Datasheet
568-6678-1-ND Cut Tape
568-6678-6-ND Digi-Reel®
568-6679-2-ND CBTL02043BBQ,115 Tape & Reel IC MUX/DEMUX 2:1 PCI 20DHVQFN
568-6679-1-ND Cut Tape
568-6679-6-ND Digi-Reel®