NXP Semiconductors Supplier Page

CBTU04083 High-Speed Multiplexer/Switch


NXP's CBTU04083 can switch four differential signals to one of two locations


NXP's CBTU04083 is an 8-to-4 differential channel multiplexer/demultiplexer switch. The CBTU04083 can switch four differential signals to one of two locations. Using a unique design technique, NXP has minimized the impedance of the switch such that the attenuation observed through the switch is negligible. NXP has also minimized the channel-to-channel skew as well as channel-to-channel crosstalk as required by the high-speed serial interface. The CBTU04083 allows the expansion of existing high speed ports for extremely low power.

The CBTU04083 high-speed switch also supports other emerging standards including 6Gbps SATA/SAS and DisplayPort v1.2 HBR2 at 5.4Gbps. By supporting these standards, the NXP CBTU04083 multiplexer/switch makes it straightforward for system designers to address the demanding performance and signal integrity requirements of future high-end computing products.
CBTU04083

Features
  • 4 differential channel, 2 : 1 multiplexer/demultiplexer
  • High-speed signal switching: 8.0Gbit/s
  • Low intra-pair skew: 10ps maximum (between positive and negative bits)
  • Low inter-pair skew: 35ps maximum
  • Low crosstalk: −30dB at 4GHz
  • Low off-state isolation: −30dB at 4GHz
  • VDD operating range: 1.8V ±10%
  • ESD tolerance:
    • 6kV HBM
    • 1kV CDM

Manufacturer P/N Digi-Key P/N Packaging Description  
CBTU04083BS,518 568-5126-2-ND Tape & Reel (TR) IC MUX/DEMUX 2X1 42QFN Datasheet
568-5126-1-ND Cut Tape (CT)
568-5126-6-ND Digi-Reel®