Microchip Academic Program

The Academic Program demonstrates Microchip's on-going commitment to education by offering unique benefits and resources for educators, researchers and students worldwide. Microchip would like to partner with academia to increase the knowledge-base in embedded applications and promote that knowledge with future engineers and innovations.

Microchip Academic Program

For the Arduino Community

chipKIT Uno32™ Arduino™ Compatible Prototyping Platform (TDGL002)

chipKIT Uno32™ Arduino™ Compatible Prototyping Platform (TDGL002) - TGDL002
chipKIT Uno32™ Arduino™ Compatible Prototyping Platform (TDGL002)
chipKIT Uno32™ Arduino™ Compatible Prototyping Platform (TDGL002)

$5.03

The chipKIT™ Uno32™ combines compatibility with the popular Arduino™ open source hardware prototyping platform with the performance of the Microchip PIC32 microcontroller. The Uno32 is the same form factor as the Arduino™ Uno board and is compatible with Arduino™ shields. It features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply.

The Uno32 board takes advantage of the powerful PIC32MX320F128 microcontroller. This microcontroller features a 32-bit MIPS processor core running at 80Mhz, 128K of flash program memory and 16K of SRAM data memory.

The Uno32 can be programmed using an environment based on the original Arduino™ IDE modified to support PIC32. In addition, the Uno32 is fully compatible with the advanced Microchip MPLAB® IDE and the PICKit3 in-system programmer/debugger.

For additional platform-specific support for your chipKIT, please visit: www.chipkit.cc/wiki.

  • Microchip® PIC32MX320F128 processor
    • 80 Mhz 32-bit MIPS
    • 128K Flash, 16K SRAM
  • Compatible with existing Arduino™ code examples, reference materials and other resources
  • Can also be programmed using Microchip's MPLAB® IDE (along with a PICkit 3 and our PICkit3 Programming Cable Kit, seen below)
  • Arduino™ "Uno" form factor
  • Compatible with Arduino™ shields
  • 42 available I/O
  • User LED
  • Connects to a PC using a USB A -> mini B cable (not included)

chipKIT Max32™ Arduino™ Compatible Prototyping Platform (TDGL003)

chipKIT Max32™ Arduino™ Compatible Prototyping Platform (TDGL003) - TDGL003
chipKIT Max32™ Arduino™ Compatible Prototyping Platform (TDGL003)
chipKIT Max32™ Arduino™ Compatible Prototyping Platform (TDGL003)

$5.03

The chipKIT™ Max32™ combines compatibility with the popular Arduino™ open source hardware prototyping platform with the performance of the Microchip PIC32 microcontroller. The Max32 is the same form factor as the Arduino Mega board and is compatible with standard Arduino™ shields as well as larger shields for use with the Mega boards. It features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply.

The Max32 board takes advantage of the powerful PIC32MX795F512 microcontroller. This microcontroller features a 32-bit MIPS processor core running at 80Mhz, 512K of flash program memory and 128K of SRAM data memory. In addition, the processor provides a USB 2 OTG controller, 10/100 Ethernet MAC and dual CAN controllers that can be accessed via add-on I/O shields.

The Max32 can be programmed using an environment based on the original Arduino™ IDE modified to support PIC32. In addition, the Max32 is fully compatible with the advanced Microchip MPLAB® IDE and the PICKit3 in-system programmer/debugger.

For additional platform-specific support for your chipKIT, please visit: www.chipkit.cc/wiki.

  • Microchip® PIC32MX795F512 processor
    • 80 Mhz 32-bit MIPS
    • 512K Flash, 128K RAM
    • USB 2.0 OTG controller
    • 10/100 Ethernet MAC
    • Dual CAN controllers
  • Provides additional memory and advanced communications peripherals
  • Compatible with existing Arduino code examples, reference materials and other resources
  • Can also be programmed using Microchip's MPLAB® IDE (along with a PICkit 3 and our PICkit3 Programming Cable Kit, seen below)
  • Arduino™ "Mega" form factor
  • Compatible with Arduino™ shields
  • 83 available I/O
  • User LED
  • Connects to a PC using a USB A -> mini B cable (not included)

Programmers/Debuggers

PICkit™ 3 In-Circuit Debugger (PG164130)

PICkit™ 3 In-Circuit Debugger (PG164130) - PG164130
PICkit™ 3 In-Circuit Debugger (PG164130)
PICkit™ 3 In-Circuit Debugger (PG164130)

$5.03

Microchip’s PICkit 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:

The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE). The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™.

The PICkit 3 can now also reprogram any PIC microcontroller with a simple push of a button.

  • USB (Full speed 12 Mbits/s interface to host PC)
  • Real-time execution
  • MPLAB IDE compatible (free copy included)
  • Built-in over-voltage/short circuit monitor
  • Firmware upgradeable from PC/web download
  • Totally enclosed
  • Supports low voltage to 2.0 volts (2.0v to 6.0v range)
  • Diagnostic LEDs (power, busy, error)
  • Read/write program and data memory of microcontroller
  • Erase of program memory space with verification
  • Freeze-peripherals at breakpoint
  • Program up to 512K byte flash with the Programmer-to-Go

MPLAB® ICD 3 In-Circuit Debugger (DV164035)

MPLAB® ICD 3 In-Circuit Debugger (DV164035) - DV164035
MPLAB® ICD 3 In-Circuit Debugger (DV164035)
MPLAB® ICD 3 In-Circuit Debugger (DV164035)

$5.03

MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC® Flash microcontrollers and dsPIC® DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integrated Development Environment (IDE).

The MPLAB ICD 3 In-Circuit Debugger probe is connected to the design engineer's PC using a high-speed USB 2.0 interface and is connected to the target with a connector compatible with the MPLAB ICD 2 or MPLAB REAL ICE systems (RJ-11). MPLAB ICD 3 supports all Emulation headers.

MPLAB ICD 3 has improved speed as compared with MPLAB ICD 2.

  • Real-time Debugging - MPLAB ICD 3 In-Circuit Debugger is designed to support high-speed processors running at maximum speeds, allowing embedded engineers to debug applications on their own hardware in real time.
  • Ruggedized Probe Interface - Protection circuitries are added to the probe drivers to guard the probe kit from power surges from the target. Vdd and Vpp voltage monitors protect against over-voltage conditions, and all lines have over-current protection. The unit can provide power to a target (up to 100 ma).
  • Microchip Standard Connectivity - MPLAB ICD 3 In-Circuit Debugger employs a standard Microchip debugging connector (RJ-11).
  • Portable, USB-powered and RoHS-Compliant - Housed in a small (3.7" x.8") and attractive enclosure, the MPLAB ICD 3 In-Circuit Debugger is powered by the USB port, so an external power adapter is not required. MPLAB ICD 3 In-Circuit Debugger is CE and RoHS-compliant.
  • High Speed Programming - Fast programming allows both quick firmware reload for fast debugging and for in-circuit re-programming. Programming times are improved up to 15x over MPLAB ICD 2.
  • Low Voltage Emulation - MPLAB ICD 3 supports target supply voltages from 2.0 to 5.5 volts.
  • Test Interface Module - Included with every MPLAB ICD 3 is a test module to test I/O lines to confirm the unit is working properly.
  • Ease of Maintenance and Feature Upgrade - Adding new device support and advanced features to MPLAB ICD 3 In-Circuit Debugger is as simple as installing later versions of the MPLAB IDE, downloadable free. MPLAB ICD 3 In-Circuit Debugger is field upgradeable through a firmware download from MPLAB IDE.
  • Low Cost - MPLAB ICD 3 In-Circuit Debugger breaks the price barrier for a complete and advanced in-circuit debugger, offering new ways to interact with and debug applications at a fraction of the cost of traditional emulator systems.
  • Powerful Debugging - High powered debugging with MPLAB IDE, supporting multiple breakpoints, stopwatch, source code file debugging in MPLAB’s editor for quick program modification/debug.

8-Bit Solutions

PICDEM™ Lab Development Kit (DM163045)

PICDEM™ Lab Development Kit (DM163045) - DM163045
PICDEM™ Lab Development Kit (DM163045)
PICDEM™ Lab Development Kit (DM163045)

$5.03

The PICDEM™ Lab Development Kit is designed to provide a comprehensive development and learning platform for Microchip's FLASH-based 6-, 8-, 14-, 18- and 20-pin 8-bit PIC® microcontrollers.

Geared toward first-time PIC® microcontroller users and students, the PICDEM™ Lab Development Kit is supplied with five of our most popular 8-bit PIC® microcontrollers and a host of discrete components to create instructive applications.

Expansion headers provide complete access/connectivity to all pins on the connected PIC® microcontrollers and all mounted components.

A solderless prototyping block is included for quick exploration of the application examples described in the “hands-on” labs included in the user’s guide. These labs provide an intuitive introduction to using common peripherals and include useful application examples, from lighting an LED to some basic mixed signal applications using the free HI-TECH C® PRO for the PIC10/12/16 MCU Family Lite Mode Compiler.

Alternately, a companion guide featuring the free version of Matrix Multimedia’s Flowcode V3 Visual Programming Environment (VPE) provides a flowchart-based method of implementing a series of introductory labs.

Completing the kit are Microchip’s PICkit™ 3 Programmer/Debugger and a suite of free software tools that enable original applications to be developed quickly.

  • PICDEM™ Lab Development Board
  • Component kit
  • PICkit™ 3 Programmer/ Debugger
  • PIC Microcontrollers including:
    • PIC16F690 (20-pin)
    • PIC16F88 (18-pin)
    • PIC16F616 (14-pin)
    • PIC12F615 (8-pin)
    • PIC10F206 (6-pin) in 8-pin PDIP package for debugging
  • CD containing a comprehensive user guide, labs, application examples and a number of additional tutorials.

PICDEM™ 2 Plus (DM163022-1)

PICDEM™ 2 Plus (DM163022-1) - DM163022-1
PICDEM™ 2 Plus (DM163022-1)
PICDEM™ 2 Plus (DM163022-1)

$5.03

The PICDEM 2 Plus board demonstrates the capabilities of Microchip’s 8-bit microcontrollers, specifically, 18-, 28- and 40-pin PIC16FXXX, PIC16F1XXX, and PIC18 devices.

It can be used as a standalone demonstration board with a programmed part. Alternatively, it can be used with an in-circuit emulator (for example, MPLAB® Real ICETM) or with an in-circuit programmer/debugger (such as MPLAB® ICD 3 or PICkitTM 3). Sample programs are provided to demonstrate the unique features of the supported devices.

  • Demonstration program displaying a real time clock, ambient temperature and much more
  • A demonstration program loaded on the installed PIC16F1937
  • Sample kit with PIC16F1936 flash microcontroller
  • Source code for all programs
  • Generous prototyping area

PICkit™ 3 Debug Express (DV164131)

PICkit™ 3 Debug Express (DV164131) - DV164131
PICkit™ 3 Debug Express (DV164131)
PICkit™ 3 Debug Express (DV164131)

$5.03

The PICkit 3 allows debugging and programming of PIC(R) and dsPIC(R) Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), and it does this all at a most affordable price point. This kit includes the 44-pin demo board with a PIC18F45K20 microcontroller, a USB cable, and a CD that includes the following:

  • PICkit 3 Debugger/Programmer
  • PICkit 3 Users Guide
  • A series of 12 lessons on assembly programming that cover I/O, A/D converters, timers, interrupts, and data tables (All source code files are provided)
  • A Debugging Tutorial on using the PICkit 3 as a debugger with the MPLAB IDE
  • Microchips FREE MPLAB IDE software and C Compiler for a complete code development environment
  • USB (Full speed 12 Mbits/s interface to host PC)
  • Real-time execution
  • MPLAB IDE compatible (free copy included)
  • Built-in over-voltage/short circuit monitor
  • Firmware upgradeable from PC/web download
  • Totally enclosed
  • Supports low voltage to 2.0 volts (2.0v to 6.0v range)
  • Diagnostic LEDs (power, busy, error)
  • Read/write program and data memory of microcontroller
  • Erase of program memory space with verification
  • Freeze-peripherals at breakpoint
  • Program up to 512K byte flash with the Programmer-to-Go

PICDEM™ Mechatronics Demo Board (DM163029)

PICDEM™ Mechatronics Demo Board (DM163029) - DM163029
PICDEM™ Mechatronics Demo Board (DM163029)
PICDEM™ Mechatronics Demo Board (DM163029)

$5.03

The PICDEM™ Mechatronics demonstration board is an easy-to-use mechatronics development and demonstration platform. Mechatronics refers to implementing intelligent control in a mechanical system. Learn how to use PIC® microcontrollers to enhance or replace a mechanical design.

The demonstration kit takes a hands-on approach to learning about mechatronics. Jumper wires are provided in the kit which allow the developer to experiment with connecting the PIC microcontroller to various components on the board. These components include sensors, LEDs, human input devices and motor drivers. The board comes with nine example projects which include firmware, connection diagrams (for the wire jumpers) and schematics.

Mechatronics Kit Contents:

  • PICDEM Mechatronics Board populated with the PIC16F917
  • Sample kit including the PIC16F690 and PIC12F509
  • Microchip screwdriver
  • 10 wire jumpers
  • PICDEM Mechatronics CD
    • User’s Guide
    • Project Source Code
    • PIC MCU Communicator GUI (serial interface example)
    • MPLAB IDE software
  • PIC16F917 MCU with 8 MHz internal oscillator and on-board LCD module (in addition to other standard PIC MCU peripherals)
  • Displays: 8 LEDs and LCD (pre-connected to the LCD module)
  • Stepper motor and brushed DC motors
  • Analog temperature sensor (Microchip TC1047A)
  • Light sensor
  • 32.768 kHz crystal for time generation
  • Human inputs: 4 tactile switches, 2 potentiometers
  • Over-current protection circuit
  • ICSP™ programming capability and MPLAB® ICD 2 interface connector
  • RS-232 interface
  • 5V regulator
  • Optical speed sensor for brushed DC motor
  • 20-pin socket (compatible with all 8-, 14- and 20-pin Flash devices)
  • Nine example projects with complete source code:
    • Switch debouncing and lighting an LED
    • How to read an analog sensor (temperature and light)
    • Brushed DC motor speed control
    • Speed feedback: Back EMF and optical
    • Stepper motor control: single-stepping, half-stepping and micro-stepping
    • How to use the USART for RS-232 communication
    • How to use the Capture, Compare and PWM module
    • How to use comparators

PIC18 Development Kit (DV164136)

PIC18 Development Kit (DV164136) - DV164136
PIC18 Development Kit (DV164136)
PIC18 Development Kit (DV164136)

$5.03

The PIC18 Development Kit is a complete bundle of the essential development tools needed to get started with your next PIC18 application. THe kit includes a PIC18 Explorer Board, PICkit 3 Debugger/Programmer, USB cable, and a 9V universal power supply. The PIC18 Explorer Board includes both the PIC18F8722 and PIC18F87J11 microcontrollers and supoorts dozens of the general purpose PIC18 families using various processor Plug-in Modules (PIMs). PICtail daughter boards enable many different accessory boards to connect to the PIC18 Explorer Board for a flexible and complete development environment. The PICkit 3 allows debugging and programming of PIC microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE) via USB connection to the PC which also provides power. The kit also includes the FREE MPLAB IDE and FREE HI-TECH C PIC18 Lite Compiler for a complete code development environm

  • Multiple PIC18 processors, both a PIC18F8722 on board (128KB Flash, 80 pins, superset of traditional PIC18 family), and a PIC18F87J11 Plug-In Module (128KB Flash, 80-pins, superset of J-series, PIM adjusts to accommodate 3V device). A switch selects the desired processor.
  • Supports many other PIC18 devices with Plug-In Modules, supporting 28 to 80-pin PIC18 devices
  • PICtail™ daughter board connector for connection to standard expansion boards such as Ethernet, speech playback, and the many different sensors
  • Expansion connector accesses full device pin-out and breadboard prototype area
  • Convenient connection for MPLAB PICkit 3, ICD 3 or REAL ICE for in-circuit programming and debugging
  • Alpha-numeric LCD display
  • USB interface for USB to RS-232 communication
  • 25LC256 SPI EEPROM
  • Crystal oscillator
  • Potentiometer (connected to 10-bit A/D, analog input channel)
  • Analog output temperature sensor
  • LEDs
  • RS-232 port
  • Power supply connector and programmable voltage regulator, capable of operation from 2.0V to 5.5V
  • Demo software including temperature sensor demo included (illustrates Microchip's analog temperature sensor MPC9701A) and 32 kHz crystal for Real Time Clock demonstration

16-Bit Solutions

Explorer 16 Starter Kit (DV164037)

Explorer 16 Starter Kit (DV164037) - DV164037
Explorer 16 Starter Kit (DV164037)
Explorer 16 Starter Kit (DV164037)

$5.03

The MPLAB ICD 3 with Explorer 16 Kit is a complete set of tools for application development using Microchip PIC24F, PIC24H, and dsPIC33 16-bit MCUs. It also includes a 9V universal power supply for the Explorer 16 Development Board, a PIC24FJ128GA010 and a dsPIC33F256GP710 device (mounted on plug-in modules for quick replacement). Also included with the kit is Microchips MPLAB IDE. MPLAB C Compiler for 16-bit decies Lite Edition, tutorials and user manuals on CD-ROM. The complete kit introduces the developer to Microchips family of 16-bit microcontrollers with all the tools for writing code in C, hardware debugging the application and programming devices.

  • Includes PIC24FJ128GA010 and the dsPIC33FJ256GP710 DSC Digital
  • Signal Controller PIMs (100-pin version) or the PIC24FJ64GA004 PIM (44-pin version).
  • Alpha-numeric 16 x 2 LCD display
  • Interfaces to MPLAB ICD 2, MPLAB REAL ICE, USB, and RS-232
  • Includes Microchip's TC1047A high accuracy, analog output temperature sensor
  • Expansion connector to access full devices pin-out and bread board prototyping area
  • PICTailTM Plus connector for expansion boards
  • Full documentation CD includes user's guide, schematics and PWB layout

16-bit 28-pin Starter Board (DM300027)

16-bit 28-pin Starter Board (DM300027) - DM300027
16-bit 28-pin Starter Board (DM300027)
16-bit 28-pin Starter Board (DM300027)

$5.03

This low-cost, 16-bit, 28-pin Starter Development Board supports 28-pin PIC24 microcontrollers or dsPIC Digital Signal Controller (DSC) devices. This board is an ideal prototyping tool to help validate key design requirements using these microcontrollers and DSCs.

Package Contents

  • 16-bit, 28-pin Starter Board
  • 28-pin PIC24FJ64GA002 device
  • USB cable
  • Example software and documentation on CD
  • Prototyping tool for all 28-pin, SDIP PIC24, dsPIC30F and dsPIC33F devices
  • Includes a 28-pin PIC24FJ64GA002 and dsPIC33FJ12GP202
  • On-board regulators for 3.3V or 5V operation
  • Power input from 9V power supply or USB power source
  • Single UART communication channel via USB bridge
  • Connectors for MPLAB® ICD 2 In-circuit Debugger/Programmer and PICkit™ 2
  • Header for access to all device I/O pins
  • Circuit prototyping area including pads for SOIC and SOT-23 devices

Microstick for dsPIC33F and PIC24H Development Board (DM330013)

Microstick for dsPIC33F and PIC24H Development Board (DM330013) - DM330013
Microstick for dsPIC33F and PIC24H Development Board (DM330013)
Microstick for dsPIC33F and PIC24H Development Board (DM330013)

$5.03

The Microstick for dsPIC33F and PIC24H devices is designed to provide designers with an easy to use, economical development environment for 16-bit Digital Signal Controllers and Microcontrollers.

Microstick provides all you need to get started at a very low cost. It has an integrated programmer / debugger. It can be used stand-alone or plugged into a prototyping board for extremely flexible development. The device under test is socketed for easy change-out, and Microchip’s MPLAB Integrated Development Environment supports Microstick. It has never been more affordable to get started with Microchip 16-bit devices!

  • Low Cost 16-bit board – Priced at $24.99 at Microchip Direct
  • Integrated USB programmer / debugger – No external debugger required
  • USB Powered – Ease of use, No external power required
  • Socketed dsPIC/PIC24 – Flexible, Easy device replacement
  • 0.025" Pin headers – Enables plug-in to Breadboard with room for jumper wires
  • Easy access to all device signals for probing
  • Small size - Smaller than a stick of gum at 20 x76mm – Easily Portable
  • On board debug LED, Utility LED and Reset Switch
  • Free demo code

PIC24E USB Starter Kit (DM240012)

PIC24E USB Starter Kit (DM240012) - DM240012
PIC24E USB Starter Kit (DM240012)
PIC24E USB Starter Kit (DM240012)

$5.03

The PIC24E USB Starter Kit provides a low cost method for the development and testing of USB OTG, Host and Device applications on the PIC24E MCU family. The board contains an on-board programming/debugger, standard A USB and micro A/B connectors, three user-programmable LEDs, three push button switches and an expansion header compatible with the Multimedia Expansion Board (DM320005) and I/O Expansion Board (DM320002). The starter kit comes preloaded with basic Communication Device Class (CDC) demonstration software

The starter kit contains the following items:

  • PIC24E USB Starter Kit Development Board
  • PIC24E USB Starter Kit Information Sheet
  • USB mini-B to standard A cable - USB debug cable to debug and power the board
  • USB micro-B to standard A cable - USB cable to communicate with the PIC24E USB
  • PIC24E USB Starter Kit Development Board
  • PIC24E USB Starter Kit Information Sheet
  • USB mini-B to standard A cable - USB debug cable to debug and power the board
  • USB micro-B to standard A cable - USB cable to communicate with the PIC24E USB

Cerebot MC7 - Advanced Motor Control Board (TDGL003)

Cerebot MC7 - Advanced Motor Control Board (TDGL003) - TDGL003
Cerebot MC7 - Advanced Motor Control Board (TDGL003)
Cerebot MC7 - Advanced Motor Control Board (TDGL003)

The Cerebot MC7 board is a microcontroller development board based on a Microchip dsPIC 16-bit Digital Signal Controller.

The Cerebot MC7 is primarily intended to be used as a controller for electro-mechanical devices such as DC motors. The microcontroller used, a dsPIC33FJ128MC706A, is a member of a dsPIC family optimized for motor control applications.

The Cerebot MC7 provides four Half-Bridge circuits that are rated for 24V at up to 5A. Each of these Half Bridge circuits is connected to the dsPIC A/D converter to measure voltage and current for closed loop feedback control. These half bridges can be used to control two brushed DC motors, two bi-polar stepper motors, one brushless DC motor, one uni-polar stepper motor. In addition, the board can be used to implement controllers for switched DC-DC converters.

The Cerebot MC7 works with the Microchip MPLAB® development environment and provides built in programming and debugging support within the MPLAB IDE.

Connectors:

  • 2 x 12-pin Pmod™ headers
  • 1 x 6-pin Pmod™ header
  • 1 x USB port for programming / debugging
  • 1 x CAN port
  • 2 x I2C daisy chain connectors
  • 8 x RC servo connectors

IC:

  • Microchip® dsPIC33 digital signal controller (dsPIC33FJ128MC706A)

Programming:

  • Program using MPLAB via onboard programming circuit
  • Four 24V/5A Half Bridge circuits with current and voltage feedback and provision for over-current interrupt
  • Power supply voltage up to 24V
  • 5V/4A switching power supply
  • Integrated programming/debugging circuit
  • One CAN network interface
  • Three Pmod connectors for Digilent Pmod™ peripheral modules
  • Eight RC servo connectors
  • Two I2C daisy chain connectors
  • 6

32-Bit Solutions

PIC32 USB Starter Kit II (DM320003-2)

PIC32 USB Starter Kit II (DM320003-2) - DM320003-2
PIC32 USB Starter Kit II (DM320003-2)
PIC32 USB Starter Kit II (DM320003-2)

$5.03

The PIC32 USB Starter Kit II provides the easiest and lowest cost method to experience the USB and CAN functionality of the PIC32 microcontrollers. Users can develop CAN applications using PIC32 expansion board. The board contains everything need to develop USB embedded host/device/OTG applications by combining this board with Microchip's free USB software.

The USB Starter Kit II has the same form factor and expansion connector as other PIC32 Starter Kits.

Box Contents:

  • PIC32 USB Starter Board II
  • Standard A to mini B cable for debugger
  • Standard A to micro B cable for USB application development
  • Quick start card directing users to web based instructions for software download and installation.

PIC32 Ethernet Starter Kit (DM320004)

PIC32 Ethernet Starter Kit (DM320004) - DM320004
PIC32 Ethernet Starter Kit (DM320004)
PIC32 Ethernet Starter Kit (DM320004)

$5.03

The PIC32 Ethernet Starter Kit provides the easiest and lowest cost method to experience 10/100 Ethernet development with PIC32. Combined with Microchip's free TCP/IP software, your project will be running in no time. The PIC32 has an available CAN 2.0b peripheral and USB host/device/OTG.

The Ethernet Starter Kit has a form factor and expansion connector that are compatible with other PIC32 Starter Kits.

Box Contents:

The PIC32 Ethernet Starter Kit runs on Microsoft Windows 2000, Windows XP, Windows Vista, and Windows 7.

Starter Kit I/O Expansion Board (DM320002)

Starter Kit I/O Expansion Board (DM320002) - DM320002
Starter Kit I/O Expansion Board (DM320002)
Starter Kit I/O Expansion Board (DM320002)

$5.03

The Starter Kit I/O Expansion Board provides Starter Kit and Starter Board users with full access to MCU signals, additional debug headers, and connection of PICtail Plus daughter cards. MCU signals are available for attaching prototype circuits or monitoring signals with logic probes. Headers are provided for connecting JTAG tools or Microchip tools using the 2-wire (ICSP) interface.

A PIC32 Starter Kit (#DM320001), PIC32 USB Starter Kit II (#DM320003-2), PIC32 Ethernet Starter Kit (DM320004), dsPIC33E USB Starter Kit (DM330012),or a PIC24E USB Starter Kit(DM240012) is required for running application code as the I/O Expansion Board does not have an MCU.

These starter kits can provide power to the I/O Expansion Board. The amount of power is determined by the drive capability of the USB port connected to the Starter Board's debugger at connector J1. If additional power is required, connect an optional 9V power supply (#AC16203) to the I/O Expansion Board.

Cerebot 32MX4 Development Board (TDGL001)

Cerebot 32MX4 Development Board  (TDGL001) - TDGL001
Cerebot 32MX4 Development Board  (TDGL001)
Cerebot 32MX4 Development Board  (TDGL001)

$5.03

The Digilent Cerebot™ 32MX4 Board is a powerful microcontroller development board suitable for embedded control and robotics projects for both students and hobbyists.

The Cerebot 32MX4 features one of the new Microchip® PIC32™ microcontrollers. The PIC32 provides a 32-bit MIPS processor core operating at 80Mhz, 512K bytes of program FLASH and 32K bytes of RAM memory and numerous peripheral devices, including a USB controller, timer/counters, serial interface controllers, A/D converter and more. The board has numerous I/O connectors and power supply options, including USB power. It also has a built in programming and debug circuit compatible with the Microchip MPLAB development software.

The Cerebot 32MX4 has a nine connectors for Digilent Pmod™ peripheral modules. Digilent Pmods include H-bridges, analog-to-digital and digital-to-analog converters, a speaker, switches, buttons, LEDs, as well as converters for easy connection to RS232, screw terminals, BNC jacks, servo motors, and more.

  • 80 MHz 32-bit MIPS processor
  • 512K Flash, 32K RAM
  • USB Program / Debug Interface
  • USB OTG Host/Device Capable
  • USB Powered
  • 16 channel, 10-bit, 500ksps A/D converter
  • Five 16-bit timers with 5 input capture and 5 PWM outputs
  • Onboard Buttons and LEDs
  • All I/Os ESD & Short-Circuit protected
  • Cerebot 32MX4 board
  • USB A -> micro B cable
  • Resource CD containing MPLAB IDE and an evaluation MPLAB C-Compiler

Microchip Part Search

Microchip Academic Newsletter

Design Support Services

Product Training Modules