Micrel, Inc. Supplier Page

SY88236L/AL Laser Driver


Micrel, Inc. and Digi-Key introduce 2.5Gbps burst mode laser driver


Micrel, Inc.'s SY88236L is a single supply 3.3V integrated burst mode laser driver and post amplifier for A-PON, B-PON, EPON, GE-PON, and G-PON applications with data rates from 155Mbps up to 2.5Gbps. The driver can deliver modulation current up to 85mA, and provides a high compliance voltage that makes it suitable for high-current operation with the laser DC-coupled to it. The post amplifier can detect signals with amplitude as low as 5mVPP.

The SY88236AL is a version of the SY88236L without 50Ω termination resistors at the inputs of the driver and the post amplifier. The SY88236AL is to be used specially in SFF modules mounted on ONU mother boards, which have preinstalled terminations. Removing post amplifier input terminations will allow for receiver gain control.
SY88236L/AL Laser Driver


Features
  • 2.4V minimum laser compliance voltage
  • Operation up to 2.5Gbps
  • Fast burst mode enable/disable delay
  • Bias, modulation, and power monitoring
  • Programmable LOS level
  • Modulation current up to 85mA
  • Bias current up to 70mA
  • Infinite bias current hold time between bursts
  • High input sensitivity post amplifier, 5mVPP
  • Available in 32-pin (5mm x 5mm) MLF®package

Digi-Key Part Number Manufacturer Part Number Description Package Type Datasheet
576-3526-5-ND SY88236LMG IC LASER DRVR 2.5GBPS 3.6V 32MLF Tray Datasheet

*Click here for Sy88236L/AL Diagram