Watch as Jamie demonstrates the benefits of 3M's very high bond adhesive products compared to standard rivets. Order 3M's VHB tape and other 3M products at DigiKey.com today.
http://bit.ly/nT4fCn - Another Geek Moment Video discussing Texas Instruments' msp430 launchpad and cc430 low power microcontroller. Watch as this rocket is launched wirelessly from Digi-Key headquarters!
Part 2 - Watch as Jamie demonstrates the Atmel QT600 development system to use with the QTouch Library. Order the Atmel QTouch System at DigiKey.com today.
Digi-Key's Josh Jimenez demonstrates how to use TE Connectivity's lighting configurator and assembly of parts of the TE Nevalo LED system.
Watch as Jamie demonstrates the Atmel QT600 development system to use with the QTouch Library. Order the Atmel QTouch System at DigiKey.com today.
Stephen Wegscheid talks about the benefits of the LMZ power module in comparison to other power supply options.
Jamie puts the 3M twin-axial cable through a torture chamber of tests to see if it can handle it without fail. Twists, bends, and splitting the cable and it still proves it's worth.
http://bit.ly/kljstb - Jamie demonstrates Digi-Key's newest lighting kit that features Cree's CXA20 LED.
Jamie Pederson heads out to Freescale's RF lab in Tempe, Arizona to demonstrate just how rugged their LDMOS parts are. The demos include high mismatch causing extreme arcing and ionized air creating music.
Stephen Wegscheid demonstrates the GUI for National Semiconductor's Sensor Analog Front-End.
Jamie Pederson shows off Panasonic's new thermal conductive material, the pyrolitic graphite sheets. Even burning with a torch, it will not fail.
Jamie Pederson & co. shows the destructive force required to damage both a polycarbonate and aluminum box manufactured by Rose+Bopla. It's more than you would expect.
http://digikey.com/lightshow - Shawn Rhen demonstrates a DIY LED project that dances to music.
Jamie Pederson demonstrates how an accelerometer mounted on a PCB strapped to a remote control car can detect freefall as it falls off the Digi-Key building roof. He also shows how one can find the correct sensor on the new Sensor Tech zone on the Digi-Key website.
Stephen A Wegscheid demonstrates how to use the simple Power Architect from National Semiconductor to complete your power solution.
Jamie Pederson demonstrates the use of the 11 pin SIP LED driver module from ROHM semiconductor.
Scott Wing shows light output from from LED arrays in comparison to a standard 60 watt incandescent light bulb.
Steve Dahl demonstrates how to use the Mezzselect mezzanine connector selection tool from FCI, found on the FCI featured products page on digikey.com. It only takes about a minute to get the connector you need!
Jamie Pederson demonstrates the dimmable LED Driver from ST Microelectronics.
Another Geek Moment video of Jamie Pederson explaining the simple construction of a Santa busting fridge alarm.
Alex Aldag demonstrates a design for a luminaire using a high-brightness LED.
Jamie Pederson demonstrates the first two labs that come with the Freescale Tower demo kit.
http://bit.ly/freescale
http://www.towergeeks.com
Alex Aldag demonstrates a design for a luminaire using a high-brightness LED.
Steve Dahl demonstrates a method of soldering high-brightness LEDs to a thermal pad using a heat gun.
Heat Guns: http://bit.ly/heatguns
Thermal boards: http://bit.ly/thermalboards
Solder Paste: http://bit.ly/solderpaste
Steve Dahl shows us how to make battery operated LED ornaments for the holidays.
An out-of-box look and demonstration of the MEMSpeedPro from Abracon. Another Geek Moment - Engineered by Digi-Key
Another Geek Moment demonstrating the abilities of DLP Pico Projector.
Jeremy Purcell, Design Support Services from Digi-Key, demonstrates the commands to adjust settings within the Linux terminal for the DLP Pico Projector from Texas Instruments.
Another Geek Moment demonstrates how to install Linux on the Beagleboard for the Pico Projector.
Jeremy Purcell, Design Support Services with Digi-Key, demonstrates how to put the Angstrom Distribution of Linux onto the beagleboard for use with the DLP Pico Projector from Texas Instruments.
Another Geek Moment introduction to the DLP Pico Projector from Texas Instruments.
Jeremy Purcell, Design Support Service engineer from Digi-Key, introduces the DLP Pico Projector from Texas Instruments. The video starts with what is in the box and demonstrates the hook-up to the beagleboard. It finishes with an example of the projection.
Quick Links:
Another Geek Moment Videos
