Skip navigation
TechXchange
Digi-Key TechXchange Communities > General > Discussions
3569 Views 0 Replies Latest reply: Mar 6, 2012 7:44 AM by AllieCat RSS
Currently Being Moderated

Mar 6, 2012 7:44 AM

Need to mount pcb on a pcb

I am designing a sensor board with an lcd interface.  I have several sensors that need a perpendicular pcb mounted on to a pcb.  I have a 32 bit pic processor that is reading analog and i2C data from this board.  It is crucicle for design reasons that pcb be mounted as close to a 90 degree angle as possiable for these sensors to give good data.  Not sure how to do this.

 

1.  is there anything electrically that can be done to make sure the signals are functional (the distance between processor and sensors is less than 5 inches)?

 

2. Is there a product that can make mounting these two boards together easier?

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 4 points
  • Helpful Answers - 3 points