Skip navigation
Digi-Key TechXchange Communities > Projects and Designs > Discussions
3911 Views 1 Reply Latest reply: Jul 8, 2014 10:05 PM by boborrob RSS
Currently Being Moderated

Jul 6, 2014 10:01 PM

How to Calculate Output for Buck Regulator

Hi Guys,


Can anyone helo me with calculating the output voltage of this LED Driver - it's an A6211. I'm going to use it to drive a series of Leds that require constant current of 200mA, and a Voltage range of 38.4-43.2V. Accdg to the data sheet you can calculate the current with iLED = Vcsreg /Rsense, that part is ok, but I was unable to calculate for the Output Voltage. Accdg to the datasheet the Vmin depends on Minimum (T-on) and the switching frequency. But I'm having problems with that, can anyone look at the datasheet i attached and see if missed anything?




More Like This

  • Retrieving data ...

Bookmarked By (0)


  • Correct Answers - 4 points
  • Helpful Answers - 3 points