Skip navigation
Digi-Key TechXchange Communities > General > Discussions
8027 Views 2 Replies Latest reply: Mar 19, 2014 2:23 PM by drshaddock RSS
Currently Being Moderated

Jan 27, 2014 10:53 PM

Redesigning the soldering iron!

Hi, we’re a team of engineering undergrads hoping to redesign the soldering iron. Specifically, we’re looking at making it safer and more usable by younger teens and children.


We’re looking for any feedback or advice you might have, especially if you have kids, so if you can spare a few minutes to fill out our survey, that’d be awesome. Or if you have any questions, feel free to shoot us an email at: Thank you for your time and input!


also, does anyone know why there is so much metal exposed towards the tip?

  • NITMOI Novice 26 posts since
    Mar 14, 2014
    Currently Being Moderated
    Mar 14, 2014 12:08 PM (in response to solder.otter)
    Redesigning the soldering iron!

    This might help your research:

  • drshaddock Novice 1 posts since
    Mar 19, 2014
    Currently Being Moderated
    Mar 19, 2014 2:23 PM (in response to solder.otter)
    Redesigning the soldering iron!

    If you're still working this out: the metal that's exposed out toward the tip is likely for thermal mass.  A lightweight solder iron with little metal out there can heat up very quickly but then when you're soldering a heavier component, it loses heat so quickly that it doesn't solder well.  However, from a safety aspect and also from the point of view of energy effiiciency, I guess there are reasons to consider wrapping that metal--either closely or with some air gap--with an insulator like a silica-based product.  It's still going to get heat, would add weight, and add bulk that might make it harder to get into close quarters to solder--but all design decisions are a compromise, aren't they?  Obviously the tip has to be metal.  And consider that the new ROHS-compliant solders, and gold, and other materials as well, are harder on iron cladding materials than the old lead/tin solders.  It might be nice to pick out a good cladding material.


    Best of luck!

More Like This

  • Retrieving data ...

Bookmarked By (0)