The evaluation kit is powered and provides power to the module from a 3.3V SDIO socket or external input for instrumentation. A 2.4GHz antenna connection port as well as an optional external Antenna diversity interface allow for complete system testing.
The Kit consists of a SG901-1091 soldered into a Carrier Board, Sagrad Part Number SG901-1080, and a SDIO Adapter Board, Sagrad Part number SG901-1042 depicted.
Please limit comments in this discussion to this series.
I am writing to ask a very simple question about SG923-0010 kit. I purchased two of the kits in order to establish a simple network experiment with a Tx-Rx pair. I expected that some firmwares and UIs that are necessary to control the hardware would be included in the package, but it was not! I was just so surprised and still have no idea how to get them.
Here is a possible answer for the datasheet: www.sagrad.com/support/1091. From the descriptions given, it sounds almost as if the board is intended to supplement other development boards for microprocessors and doesn't have its own dev environment.