Pervasive Displays DistributorTexas Instruments Distributor

EPD Extension Kit


Pervasive Displays' EPD extension board supports driving PDI's 1.44, 2, and 2.7 inch e-paper display (EPD) modules


To get started with Pervasive Displays' e-paper development, you will need a display and this extension board. The EPD extension board supports driving PDI's 1.44, 2, and 2.7 inch e-paper display (EPD) modules. This extension board provides two 10-pins sockets that are able to stack on Texas Instruments' LaunchPad as a BoosterPack and one 20-pins header to connect with your product or development kit, driving EPD via SPI interface by provided cable.

Video:
TI Launchpad with Epaper from Pervasive Displays
Pervasive Displays's EPD Extension Kit
Features
  • Supports driving 1.44", 2" or 2.7" EPD panels
  • On-board 8M-bits serial Flash memory and temperature sensor
  • VCC input voltage is available from 10 V to 3 V
  • Direct-connect socket for Texas Instruments LaunchPad™
  • Starter board to work with EPD
  • 20 input/output headers at front-side-bridge to any development/evaluation kit or product
  • Documentation for panels and driving waveform
  • Source code for simple demonstration programs


Digi-Key P/N Manufacturer P/N Description
296-27570-ND MSP-EXP430G2 LAUNCHPAD DEV BRD FOR MSP430G2XX Datasheet
SK014AS0T1-ND SK014AS0T1 EXTENSION KIT DISPLAY TFT 1.44" Datasheet
SG020AS0T1-ND SG020AS0T1 EXTENSION KIT DISPLAY TFT 2"
SM027AS0T1-ND SM027AS0T1 EXTENSION KIT DISPLAY TFT 2.7"