TI-Reference-Designs

Texas Instruments has launched TI Designs, the industry’s most extensive reference design library, spanning TI’s broad portfolio of analog, embedded processor and connectivity products. Each TI Design includes test data, a schematic or block diagram, bill of materials (BOM), and design files. Buy a completed TI Design or buy a Build-It kit and customize the design yourself.

Jump-start system design and speed time to market

Comprehensive designs include schematics or block diagrams, BOMs,
design files and test reports


Created by experts with deep system and product knowledge


Spans TI's portfolio of analog, embedded processor and connectivity products


Supports a broad range of applications including industrial, automotive,
consumer, medical and more


View the Important Notice for TI Designs covering authorized use,
intellectual property matters and disclaimers


 

Featured TI Design

Featured TI Design TIPD108

Design a 500 kHz, 5 V PWM waveform

This Verified Design utilizes a triangle wave generator and comparator to generate a pulse-width-modulated (PWM) waveform with a duty cycle that is inversely proportional to the input voltage. An op amp and comparator generate a triangular waveform which is passed to one input of a comparator. By passing the input voltage to the other comparator input, a PWM waveform is produced. Negative feedback of the PWM waveform to an error amplifier is utilized to ensure high accuracy and linearity of the output. The OPA2365 op amp, TLV3502 comparator, and REF3325 reference were used to build this design.

» View Designs

Choose an Evaluation Board to Build

 

PWM Generator


TIPD108

Current Sensing


TIPD135

Data Acquisition System
(DAQ)

TIPD115

Bridge Sensor Conditioner


TIPD126
 

Bipolar Signal Source


TIPD125

USB Charger


PMP7390

40V, Dual 1A
Power Solution

PMP8372

±10V Four-Quadrant
Multiplying DAC

TIPD137

Power for PLC
I/O Module

PMP7993

Xilinx Virtex-6 Power


PMP5098.3

Analog PWM Generator 5V, 500kHz PWM Output

TIPD108

This Verified Design utilizes a triangle wave generator and comparator to generate a pulse-width-modulated (PWM) waveform with a duty cycle that is inversely proportional to the input voltage. An op amp and comparator generate a triangular waveform which is passed to one input of a comparator. By passing the input voltage to the other comparator input, a PWM waveform is produced. Negative feedback of the PWM waveform to an error amplifier is utilized to ensure high accuracy and linearity of the output. The OPA2365 op amp, TLV3502 comparator, and REF3325 reference were used to build this design.

Features

» Single-Supply Solution

» -2V to 2V input, DC coupled

» 5V, 500kHz PWM output

» 0.22% Measured Gain Error

» 0.108% Measured Offset Error

Technical Documents

» Verified Design Reference Guide

» Schematic/Block Diagram

» Test Data

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1001-ND American P.C.B Company TIPD108 PCB FOR TI REF DESIGN TIPD108 1 Buy Now
296-20801-ND Texas Instruments OPA2365AID IC OPAMP GP 50MHZ RRO 8SOIC 1 Buy Now
296-18301-5-ND Texas Instruments TLV3502AID IC COMPARATOR R-R HI-SPD 8-SOIC 1 Buy Now
296-22642-1-ND Texas Instruments REF3325AIDCKT IC VREF SERIES PREC 2.5V SC-70-3 1 Buy Now
478-1175-1-ND AVX Corporation 06035A101JAT2A CAP CER 100PF 50V 5% NP0 0603 2 Buy Now
478-3726-1-ND AVX Corporation 0603YC104JAT2A CAP CER 0.1UF 16V 5% X7R 0603 6 Buy Now
399-1255-1-ND Kemet C1206C105K3RACTU CAP CER 1UF 25V 10% X7R 1206 1 Buy Now
399-1265-1-ND Kemet C1206C475K4PACTU CAP CER 4.7UF 16V 10% X5R 1206 2 Buy Now
A97555-ND TE Connectivity 1-1634612-0 CONN BNC JACK R/A 50 OHM PCB 2 Buy Now
575-4K-ND Keystone Electronics 575-4 JACK NON-INSULATED .218" 2 Buy Now
A26543-ND TE Connectivity 87224-2 CONN HEADER VERT .100 2POS 15AU 1 Buy Now
541-10.0KHCT-ND Vishay Dale CRCW060310K0FKEA RES 10.0K OHM 1/10W 1% 0603 SMD 10 Buy Now
541-8.45KHCT-ND Vishay Dale CRCW06038K45FKEA RES 8.45K OHM 1/10W 1% 0603 SMD 10 Buy Now
541-5.90KHCT-ND Vishay Dale CRCW06035K90FKEA RES 5.90K OHM 1/10W 1% 0603 SMD 10 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

10uA-100mA, 0.05% Error, High-Side Current Sensing Solution

TIPD135
This TI Precision Verified Design provides the theory, component selection, simulation, complete PCB schematic and layout, bill of materials, and measured performance of a split-supply, high-side four decade current sensing solution that can accurately detect load currents from 10uA-100mA. The corresponding linear output is from 10mV to 4.9V which enables measurement by common 5V ADCs. The design utilizes the PGA281, an instrumentation amplifier with pin-programmable gain and a wide common-mode voltage range, to provide a more accurate and versatile solution than traditional op amps.

Features

» Senses Current from 10uA-100mA with <0.05% Error

» Supports up to ±12.5V Common-mode Input Range

» 10mV to 4.9V output for measurement by common 5V ADCs

» Utilizes PGA281 pin-programmable gain instrumentation amplifier to achieve four decade current measurement

» High-Side, Four Decade, Bi-directional, Current Sensing Verified Solution

 

Technical Documents

» Verified Design Reference Guide

» Schematic/Block Diagram

» Test Data

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1004-ND American P.C.B Company TIPD135 PCB FOR TI REF DESIGN TIPD135 1 Buy Now
296-36433-5-ND Texas Instruments PGA281AIPW IC OPAMP PGA 6MHZ RRO 16TSSOP 1 Buy Now
296-30081-1-ND Texas Instruments TPS7A4101DGNR IC REG LDO ADJ 50MA 8MSOP 1 Buy Now
1276-1009-1-ND Samsung Electro-Mechanics America CL10B103KB8NNNC CAP CER 10000PF 50V 10% X7R 0603 9 Buy Now
1276-1018-1-ND Samsung Electro-Mechanics America CL10B102KB8NNNC CAP CER 1000PF 50V 10% X7R 0603 2 Buy Now
1276-1000-1-ND Samsung Electro-Mechanics America CL10B104KB8NNNC CAP CER 0.1UF 50V 10% X7R 0603 1 Buy Now
1276-1804-1-ND Samsung Electro-Mechanics America CL31B106KAHNNNE CAP CER 10UF 25V 10% X7R 1206 3 Buy Now
SMBJ20CALFCT-ND Littelfuse Inc SMBJ20CA TVS DIODE 20VWM 32.4VC SMB 2 Buy Now
BAT54-V-GS08CT-ND Vishay Semiconductor Diodes Division BAT54-E3-08 DIODE SCHOTTKY 30V 0.2A SOT23 1 Buy Now
160-1181-1-ND Lite-On Inc LTST-C190CKT LED RED CLEAR 0603 SMD 1 Buy Now
RMCF0805JT1K00CT-ND Stackpole Electronics Inc RES 1K OHM 1/8W 5% 0805 RMCF0805JT1K00 5 Buy Now
RMCF0805JT100KCT-ND Stackpole Electronics Inc RMCF0805JT100K RES 100K OHM 1/8W 5% 0805 5 Buy Now
RMCF0805FT75R0CT-ND Stackpole Electronics Inc RMCF0805FT75R0 RES 75 OHM 1/8W 1% 0805 4 Buy Now
RMCF0805FT20K0CT-ND Stackpole Electronics Inc RMCF0805FT20K0 RES 20K OHM 1/8W 1% 0805 2 Buy Now
541-22.0UCT-ND Vishay Dale CRCW120622R0FKEAHP RES 22.0 OHM .5W 1% 1206 SMD 10 Buy Now
RMCF0805FT221RCT-ND Stackpole Electronics Inc RMCF0805FT221R RES 221 OHM 1/8W 1% 0805 1 Buy Now
RMCF0805FT33K2CT-ND Stackpole Electronics Inc RMCF0805FT33K2 RES 33.2K OHM 1/8W 1% 0805 1 Buy Now
RMCF0805FT10K0CT-ND Stackpole Electronics Inc RMCF0805FT10K0 RES 10K OHM 1/8W 1% 0805 1 Buy Now
CPA25Q6.8CT-ND Susumu CPA2512Q6R80FS-T10 RES 6.8 OHM 16W 1% 2512 SMD 1 Buy Now
SW1013-ND Omron Electronics Inc-EMC Div A6S-5104-H SW DIP 5POS TOP ACT GULLEAD 24V 1 Buy Now
A97555-ND TE Connectivity 1-1634612-0 CONN BNC JACK R/A 50 OHM PCB 4 Buy Now
J147-ND Emerson Network Power Connectivity Johnson 108-0740-001 CONN JACK BANANA UNINS PANEL MOU 5 Buy Now
H781-ND B&F Fastener Supply PMS 440 0038 PH MACHINE SCREW PAN PHILLIPS 4-40 100 Buy Now
2203K-ND Keystone Electronics 2203 HEX STANDOFF 4-40 ALUMINUM 1/2" 4 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

Data Acquisition Optimized for Lowest Distortion, Lowest Noise, 18 bit, 1Msps Reference Design

TIPD115
This TI Verified Design is a high performance data acquisition system (DAQ) using an 18-bit SAR ADC, ADS8881 at a throughput of 1MSPS. This design has been optimized to provide the lowest noise & distortion solution for a full scale input sinewave of 10 KHz. This leads to a maximum possible value for Effective Number of Bits (ENOB) at a total power consumption of less than 50mW. The input driver for the ADC uses the fully-differential THS4521 for extremely low distortion, noise and high small signal bandwidth. The reference buffer drive utilizes a composite buffer made out of THS4281 & OPA333 to get the desired performance at lowest power consumption.

Features

» 18 Bit, 1Msps Sampling Rate

» DC, 10kHz AC

» Optimization: ENOB

» Power: 50mW @ AVDD = 5V

» Utilizes ADS8881 (18bit, 1Msps SAR ADC), THS4521 (Input), OPA333 + THS4281 + REF5045 (Reference)

 

Technical Documents

» Verified Design Reference Guide

» Schematic/Block Diagram

» Test Data

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1006-ND American P.C.B Company TIPD115 PCB FOR TI REF DESIGN TIPD115 1 Buy Now
296-37232-1 Texas Instruments ADS8861IDGSR IC ADC 16BIT 1MSPS 10VSSOP 1 Buy Now
296-24505-1-ND Texas Instruments REF5045IDGKT IC VREF SERIES PREC 4.5V 8VSSOP 1 Buy Now
296-19546-1-ND Texas Instruments OPA333AIDBVT IC OPAMP CHOPPER 350KHZ SOT23-5 1 Buy Now
296-17000-1-ND Texas Instruments THS4281DBVT IC OPAMP VFB 95MHZ RRO SOT23-5 1 Buy Now
296-25307-1-ND Texas Instruments OPA330AIDBVT IC OPAMP CHOPPER 350KHZ SOT23-5 1 Buy Now
296-12380-1-ND Texas Instruments TPS78833DBVR IC REG LDO 3.3V 0.15A SOT23-5 1 Buy Now
296-24077-1-ND Texas Instruments THS4521IDGKT IC OPAMP DIFF 95MHZ RRO 8VSSOP 1 Buy Now
490-1524-1-ND Murata Electronics North America GRM188R71E104KA01D CAP CER 0.1UF 25V 10% X7R 0603 5 Buy Now
445-7404-1-ND TDK Corporation C1608C0G1H103J080AA CAP CER 10000PF 50V 5% NP0 0603 1 Buy Now
490-5307-1-ND Murata Electronics North America GRM188R71E105KA12D CAP CER 1UF 25V 10% X7R 0603 9 Buy Now
490-3905-1-ND Murata Electronics North America GRM21BR71A106KE51L CAP CER 10UF 10V 10% X7R 0805 3 Buy Now
490-1451-1-ND Murata Electronics North America GRM1885C1H102JA01D CAP CER 1000PF 50V 5% NP0 0603 3 Buy Now
445-4042-1-ND TDK Corporation C3216X7R1C106K160AC CAP CER 10UF 16V 10% X7R 1206 2 Buy Now
TSM-110-01-L-DV-P-ND Samtec Inc TSM-110-01-L-DV-P CONN HEADER 20POS .100" SMD GOLD 2 Buy Now
SSW-110-22-F-D-VS-K-ND Samtec Inc SSW-110-22-F-D-VS-K CONN RECPT 20POS .100" SMT GOLD 2 Buy Now
TSM-105-01-L-DV-P-ND Samtec Inc TSM-105-01-L-DV-P CONN HEADER 10POS .100" SMT GOLD 1 Buy Now
SSW-105-22-F-D-VS-K-ND Samtec Inc SSW-105-22-F-D-VS-K CONN RECPT 10POS .100" SMT GOLD 1 Buy Now
ACX1230-ND Amphenol Connex 132134 CONN SMA JACK STR 50 OHM PCB 2 Buy Now
J500-ND Emerson Network Power Connectivity Johnson 142-0701-201 CONN SMA JACK STR 50 OHM PCB 2 Buy Now
SAM1031-03-ND Samtec Inc TSW-103-07-L-S CONN HEADER 3POS .100" SGL GOLD 2 Buy Now
SAM1031-02-ND Samtec Inc TSW-102-07-L-S CONN HEADER 2POS .100" SGL GOLD 1 Buy Now
P1.0KDBCT-ND Panasonic Electronic Components ERA-3AEB102V RES 1K OHM 1/10W .1% 0603 SMD 4 Buy Now
541-10.0HCT-ND Vishay Dale CRCW060310R0FKEA RES 10.0 OHM 1/10W 1% 0603 SMD 10 Buy Now
408-1424-1-ND Susumu RL0816S-R22-F RES 0.22 OHM 1/5W 1% 0603 3 Buy Now
P1.00KHCT-ND Panasonic Electronic Components ERJ-3EKF1001V RES 1K OHM 1/10W 1% 0603 SMD 3 Buy Now
P0.0GCT-ND Panasonic Electronic Components ERJ-3GEY0R00V RES 0.0 OHM 1/10W JUMP 0603 SMD 5 Buy Now
P20.0KHCT-ND Panasonic Electronic Components ERJ-3EKF2002V RES 20K OHM 1/10W 1% 0603 SMD 5 Buy Now
P47.0HCT-ND Panasonic Electronic Components ERJ-3EKF47R0V RES 47 OHM 1/10W 1% 0603 SMD 5 Buy Now
24LC256-I/ST-ND Microchip Technology 24LC256-I/ST IC EEPROM 256KBIT 400KHZ 8TSSOP 1 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

Bridge Sensor Signal Conditioner with Current Loop Output, EMC Protection

TIPD126
This bridge sensor conditioner module delivers a well-regulated current output to a ground-referenced load. The first stage uses a mixed-signal programmable gain amplifier (PGA) to provide linearization and temperature compensation to a differential bridge sensor voltage. The second stage converts the PGA output voltage into current and transmits the current over a standard 4mA to 20mA current loop. Additional circuitry protects the module against electrostatic discharge (ESD), electrical fast transients (EFT), radiated and conducted electromagnetic interference (EMI), and lightning surge.

Features

» EMC Tested According to IEC 61000-4 and FCC Standards

» Digitally Calibrated 4-20mA Output

» 0.1% Accuracy

 

Technical Documents

» CerTIfied Design Reference Guide

» Schematic/Block Diagram

» Test Data

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1003-ND American P.C.B Company TIPD126 PCB FOR TI REF DESIGN TIPD126 1 Buy Now
296-18744-1-ND Texas Instruments XTR117AIDGKT IC 4-20MA CURRENT-LOOP TX 8VSSOP 1 Buy Now
296-16726-1-ND Texas Instruments PGA309AIPWT SMART PROGRAMMABLE SENSOR 1 Buy Now
445-4958-1-ND TDK Corporation C1005X7R1A104K050BB CAP CER 0.1UF 10V 10% X7R 0402 4 Buy Now
311-1419-1-ND Yageo CC0402KRX7R9BB101 CAP CER 100PF 50V 10% X7R 0402 2 Buy Now
399-7759-1-ND Kemet C0402C103K8RACTU CAP CER 10000PF 10V 10% X7R 0402 4 Buy Now
445-1311-1-ND TDK Corporation C1608X7R1H103K080AA CAP CER 10000PF 50V 10% X7R 0603 1 Buy Now
399-8941-1-ND Kemet C0402C102K9RACTU CAP CER 1000PF 6.3V 10% X7R 0402 1 Buy Now
P39.2KLCT-ND Panasonic Electronic Components ERJ-2RKF3922X RES 39.2K OHM 1/10W 1% 0402 SMD 2 Buy Now
P191KLCT-ND Panasonic Electronic Components ERJ-2RKF1913X RES 191K OHM 1/10W 1% 0402 SMD 1 Buy Now
P100LCT-ND Panasonic Electronic Components ERJ-2RKF1000X RES 100 OHM 1/10W 1% 0402 SMD 1 Buy Now
A102592CT-ND TE Connectivity 4-1879215-1 RES 11.3K OHM 1/16W 0.1% 0402 1 Buy Now
A102579CT-ND TE Connectivity 7-1879208-3 RES 10.0K OHM 1/16W 0.1% 0402 1 Buy Now
P0.0JCT-ND Panasonic Electronic Components ERJ-2GE0R00X RES 0.0 OHM 1/10W JUMP 0402 SMD 1 Buy Now
P4.70KLCT-ND Panasonic Electronic Components ERJ-2RKF4701X RES 4.7K OHM 1/10W 1% 0402 SMD 2 Buy Now
240-2380-1-ND Laird-Signal Integrity Products HZ0603C601R-10 FERRITE 300MA 600 OHM 0603 SMD 2 Buy Now
SMBJ5V0CACT-ND Littelfuse Inc SMBJ5V0CA TVS DIODE 5VWM 9.2VC SMB 1 Buy Now
BAS70TPMSCT-ND Micro Commercial Co BAS70-TP DIODE SCHOTTKY 70V 0.07A SOT23 1 Buy Now
SMBJ40CAFSCT-ND Littelfuse Inc SMBJ40CA TVS DIODE 40VWM 64.5VC SMB 1 Buy Now
FCX690BCT-ND Diodes Incorporated FCX690BTA TRANSISTOR NPN 45V 2000MA SOT-89 1 Buy Now
24LC16BHT-I/OTCT-ND Microchip Technology 24LC16BHT-I/OT IC EEPROM 16KBIT 400KHZ SOT23-5 1 Buy Now
HTSW-102-07-G-S-ND Samtec Inc HTSW-102-07-G-S CONN HEADER 2POS .100" T/H GOLD 2 Buy Now
HTSW-105-07-G-S-ND Samtec Inc HTSW-105-07-G-S CONN HEADER 5POS .100" T/H GLD 1 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

Bipolar +/-10V Output from a Unipolar DAC for Industrial Voltage Drivers

TIPD125
This Verified Design is for conditioning a low-cost, unipolar, generic DAC into an accurate bipolar signal source using an op amp and 3 resistors. The circuit is designed with reactive load stability in mind and is compensated to drive nearly any conventional capacitive load associated with long cable lengths.

Features

» Conditions 0-2.5V to +/-10V Output

» 0.1%FSR Uncalibrated Error

» DAC8560 with 2ppm/°C Internal Reference

» OPA188 Zero-offset, Zero-Drift Amplifier

 

Technical Documents

» Verified Design Reference Guide

» Schematic/Block Diagram

» Test Data

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1002-ND American P.C.B Company TIPD125 PCB FOR TI REF DESIGN TIPD125 1 Buy Now
296-21388-1-ND Texas Instruments DAC8560IDDGKT IC DAC 16BIT W/2.5V REF 8VSSOP 1 Buy Now
296-36185-5-ND Texas Instruments OPA188AID IC OPAMP ZERO-DRIFT 2MHZ 8SOIC 1 Buy Now
478-3713-1-ND AVX Corporation 06033C104JAT2A CAP CER 0.1UF 25V 5% X7R 0603 3 Buy Now
478-1175-1-ND AVX Corporation 06035A101JAT2A CAP CER 100PF 50V 5% NP0 0603 3 Buy Now
445-7031-1-ND TDK Corporation C1608C0G1H151F080AA CAP CER 150PF 50V 1% NP0 0603 1 Buy Now
1276-1984-1-ND Samsung Electro-Mechanics America CL10B203KB8NNNC CAP CER 0.02UF 50V 10% X7R 0603 1 Buy Now
P71.5HCT-ND Panasonic Electronic Components ERJ-3EKF71R5V RES 71.5 OHM 1/10W 1% 0603 SMD 1 Buy Now
490-1403-1-ND Murata Electronics North America GRM1885C1H100JA01D CAP CER 10PF 50V 5% NP0 0603 3 Buy Now
SAM1028-04-ND Samtec Inc TSW-104-07-G-D CONN HEADER 8POS .100" DUAL GOLD 1 Buy Now
ED1514-ND On Shore Technology Inc ED555/2DS TERMINAL BLOCK 3.5MM 2POS PCB 2 Buy Now
ED1515-ND On Shore Technology Inc ED555/3DS TERMINAL BLOCK 3.5MM 3POS PCB 1 Buy Now
RG16P8.25KBCT-ND Susumu RG1608P-8251-B-T5 RES 8.25K OHM 1/10W .1% 0603 SMD 1 Buy Now
RG16P11.0KBCT-ND Susumu RG1608P-113-B-T5 RES 11.0K OHM 1/10W .1% 0603 SMD 1 Buy Now
RG16P33.0KBCT-ND Susumu RG1608P-333-B-T5 RES 33.0K OHM 1/10W .1% 0603 SMD 1 Buy Now
5000K-ND Keystone Electronics 5000 TEST POINT PC MINI .040"D RED 1 Buy Now
5001K-ND Keystone Electronics 5001 TEST POINT PC MINI .040"D BLACK 5 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

Dual-Port Automotive USB Charger Reference Design

PMP7390
Using the TPS40170 PWM Buck Controller, this power management reference design provides a regulated 5V to power 2 USB ports at 2.1A each (total 4.2A) in a small form-factor. The design has been optimized for a nominal 12V input and accepts 8-60V.

Features

» 8 to 60V (12V nominal) input voltage and 5V/4.2A output with TPS40170

» Form factor complies to UL 2089 and ANSI/SAE J563

» Meets BC1.2 for DCP with one TPS2511 per port

» Supports both USB 2.0 and 3.0 power switch requirements

» TPS2511 USB power switch also offers the data line control to charge many devices

 

Technical Documents

» Schematic/Block Diagram

» Test Data

» PCB

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1000-ND American P.C.B Company PMP7390 PCB FOR TI REF DESIGN PMP7390 1 Buy Now
296-28364-1-ND Texas Instruments TPS40170RGYT IC REG CTRLR BUCK PWM VM 20-VQFN 1 Buy Now
296-30552-1 Texas Instruments TPS2511DGNR IC USB PWR SW/CTRLR CHRG 8MSOP 2 Buy Now
399-7774-1-ND Kemet C0402C220J3GACTU CAP CER 22PF 25V 5% NP0 0402 1 Buy Now
399-1024-1-ND Kemet C0402C471K3RACTU CAP CER 470PF 25V 10% X7R 0402 1 Buy Now
311-1036-1-ND Yageo CC0402KRX7R9BB102 CAP CER 1000PF 50V 10% X7R 0402 1 Buy Now
399-7789-1-ND Kemet C0402C332K3RACTU CAP CER 3300PF 25V 10% X7R 0402 1 Buy Now
445-7348-1-ND TDK Corporation C1005X7R1E104K050BB CAP CER 0.1UF 25V 10% X7R 0402 3 Buy Now
445-4975-1-ND TDK Corporation C1005X5R1C334M050BC CAP CER 0.33UF 16V 20% X5R 0402 1 Buy Now
445-4978-1-ND TDK Corporation C1005X5R1C105K050BC CAP CER 1UF 16V 10% X5R 0402 1 Buy Now
1276-1029-1-ND Samsung Electro-Mechanics America CL21B105KBFNNNE CAP CER 1UF 50V 10% X7R 0805 1 Buy Now
587-2994-1-ND Taiyo Yuden UMK316AB7475KL-T CAP CER 4.7UF 50V 10% X7R 1206 3 Buy Now
445-7492-1-ND TDK Corporation C1608X5R0J106K080AB CAP CER 10UF 6.3V 10% X5R 0603 1 Buy Now
587-1305-1-ND Taiyo Yuden JMK212BJ226MG-T CAP CER 22UF 6.3V 20% X5R 0805 4 Buy Now
WM17112-ND Molex Inc 0894858000 CONN USB RT ANG RECEPT TYPE A 2 Buy Now
541-1308-1-ND Vishay Dale IHLP4040DZER100M11 INDUCTOR POWER 10UH 7.5A SMD 1 Buy Now
FDS5351CT-ND Fairchild Semiconductor FDS5351 MOSFET N-CH 60V 6.1A 8-SOIC 2 Buy Now
311-0.0JRCT-ND Yageo RC0402JR-070RL RES 0.0 OHM 1/16W JUMP 0402 SMD 2 Buy Now
311-49.9LRCT-ND Yageo RC0402FR-0749R9L RES 49.9 OHM 1/16W 1% 0402 SMD 1 Buy Now
311-2KLRCT-ND Yageo RC0402FR-072KL RES 2K OHM 1/16W 1% 0402 SMD 1 Buy Now
RMCF0402FT6K65CT-ND Stackpole Electronics Inc RMCF0402FT6K65 RES 6.65K OHM 1/16W 1% 0402 1 Buy Now
311-10.0KLRCT-ND Yageo RC0402FR-0710KL RES 10.0K OHM 1/16W 1% 0402 SMD 1 Buy Now
P16.9KLCT-ND Panasonic Electronic Components ERJ-2RKF1692X RES 16.9K OHM 1/10W 1% 0402 SMD 2 Buy Now
311-20.0KLRCT-ND Yageo RC0402FR-0720KL RES 20.0K OHM 1/16W 1% 0402 SMD 1 Buy Now
RMCF0402FT31K6CT-ND Stackpole Electronics Inc RMCF0402FT31K6 RES 31.6K OHM 1/16W 1% 0402 1 Buy Now
311-40.2KLRCT-ND Yageo RC0402FR-0740K2L RES 40.2K OHM 1/16W 1% 0402 SMD 1 Buy Now
311-49.9KLRCT-ND Yageo RC0402FR-0749K9L RES 49.9K OHM 1/16W 1% 0402 SMD 1 Buy Now
311-100KLRCT-ND Yageo RC0402FR-07100KL RES 100K OHM 1/16W 1% 0402 SMD 1 Buy Now
311-200KLRCT-ND Yageo RC0402FR-07200KL RES 200K OHM 1/16W 1% 0402 SMD 2 Buy Now
311-499KLRCT-ND Yageo RC0402FR-07499KL RES 499K OHM 1/16W 1% 0402 SMD 1 Buy Now
5000K-ND Keystone Electronics 5000 TEST POINT PC MINI .040"D RED 4 Buy Now
5001K-ND Keystone Electronics 5001 TEST POINT PC MINI .040"D BLACK 2 Buy Now
Buy Build It Kit View Design

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

40V, Dual 1A Power Module Solution with Low Noise LDOs, Split-Rail (±5V) Output Voltages

PMP8372
The PMP8372 design is optimized for small size and uses the TPS84250 step-down power module on the top- side with the TPS84259 negative output power module on the bottom-side to implement both positive and negative output voltages from a 12V/24V source. The output voltages can be adjusted from +/-3V to +/-15V with resistor changes. The design is capable of 1-A outputs. The positive-input TPS7A4700 LDO and negative-input TPS7A3301 LDO are included for a low noise, high PSRR solution that is ideal for powering bipolar amplifiers, data converters, or other noise-sensitive analog circuitry.

Features

» Wide input Voltage range from 7V to 40V

» Dual output voltages can be adjusted from +/-3V to +/-15V, which are capable of 1A outputs

» High PSRR LDOs: Positive output 80dB PSRR @ 100Hz and Negative output 72dB PSRR @ 100KHz

» Positive output noise: 7μVrms (10Hz, 100kHz), Negative output noise: 30μVrms (10Hz, 100kHz)

» Ultra Low noise for powering bipolar amplifier, data converter, or other noise-sensitive analog circuitry

 

Technical Documents

» Test Data

» PCB

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1008-ND American P.C.B Company PMP8372 PCB FOR TI REF DESIGN 1 Buy Now
296-34830-1-ND Texas Instruments TPS7A3301RGWT IC REG LDO NEG ADJ 1A 20VQFN 1 Buy Now
296-34945-1-ND Texas Instruments TPS84259RKGR IC REG BUCK NEG ADJ 41B1QFN 1 Buy Now
296-34969-1-ND Texas Instruments TPS84250RKGT IC REG BUCK ADJ 2.5A 41B1QFN 1 Buy Now
296-34769-1-ND Texas Instruments TPS7A4700RGWT IC REG LDO ADJ 1A 20VQFN 1 Buy Now
P837-ND Panasonic Electronic Components ECE-A1HKA220 CAP ALUM 22UF 50V 20% RADIAL 1 Buy Now
445-14387-1-ND TDK Corporation C2012X5R1E106K085AC CAP CER 10UF 25V 10% X5R 0805 4 Buy Now
445-8047-1-ND TDK Corporation C3216X5R1E476M160AC CAP CER 47UF 25V 20% X5R 1206 6 Buy Now
445-1316-1-ND TDK Corporation C1608X7R1E104K080AA CAP CER 0.1UF 25V 10% X7R 0603 1 Buy Now
445-5146-1-ND TDK Corporation C1608X5R1E105K080AC CAP CER 1UF 25V 10% X5R 0603 2 Buy Now
445-5976-1-ND TDK Corporation C2012X5R1H225K125AB CAP CER 2.2UF 50V 10% X5R 0805 1 Buy Now
445-5980-1-ND TDK Corporation C2012X5R1H475K125AB CAP CER 4.7UF 50V 10% X5R 0805 4 Buy Now
DDZ9687-7DICT-ND Diodes Incorporated DDZ9687-7 DIODE ZENER 4.3V 500MW SOD-123 1 Buy Now
P1.10MHCT-ND Panasonic Electronic Components ERJ-3EKF1104V RES 1.1M OHM 1/10W 1% 0603 SMD 1 Buy Now
A102199CT-ND TE Connectivity 5-1879338-6 RES 100K OHM 1/16W 1% 0603 1 Buy Now
A102201CT-ND TE Connectivity 5-1879338-7 RES 102K OHM 1/16W 1% 0603 1 Buy Now
A110323CT-ND TE Connectivity RP73PF1J174KBTDF RES 174K OHM 1/6W 0.1% 0603 2 Buy Now
A110241CT-ND TE Connectivity RP73PF1J24K3BTDF RES 24.3K OHM 1/6W 0.1% 0603 2 Buy Now
A110251CT-ND TE Connectivity RP73PF1J30K9BTDF RES 30.9K OHM 1/6W 0.1% 0603 1 Buy Now
A110350CT-ND TE Connectivity RP73PF1J332KBTDF RES 332K OHM 1/6W 0.1% 0603 1 Buy Now
A102283CT-ND TE Connectivity 3-1879335-6 RES 49.9 OHM 1/16W 1% 0603 2 Buy Now
A102282CT-ND TE Connectivity 2-1879338-7 RES 49.9K OHM 1/16W 1% 0603 1 Buy Now
A103118CT-ND TE Connectivity 9-1676481-3 RES 62.0K OHM 1/16W 0.1% 0603 1 Buy Now
311-64.9KHRCT-ND Yageo RC0603FR-0764K9L RES 64.9K OHM 1/10W 1% 0603 SMD 1 Buy Now
ED1514-ND On Shore Technology Inc ED555/2DS TERMINAL BLOCK 3.5MM 2POS PCB 5 Buy Now
5011K-ND Keystone Electronics 5011 TEST POINT PC MULTI PURPOSE BLK 6 Buy Now
5013K-ND Keystone Electronics 5013 TEST POINT PC MULTI PURPOSE ORG 7 Buy Now
5010K-ND Keystone Electronics 5010 TEST POINT PC MULTI PURPOSE RED 6 Buy Now
EMD12T2RCT-ND Rohm Semiconductor EMD12T2R TRANS PREBIAS NPN/PNP EMT6 1 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

±10V Four-Quadrant Multiplying DAC

TIPD137
This TI Precision Verified Design provides the theory, component selection, simulation, PCB design, and measurement details for a dual-supply, four-quadrant MDAC solution that can accurately generate output votlages from -10V to +10V. By removing the summing stage, this design also serves as reference for designing a simple two-quadrant MDAC circuit.

Features

» +/-10V Bipolar output voltage with 0.1% error

» How to choose an MDAC output amplifier

» Dual-Supply Solution

» Four-Quadrant MDAC Configuration

» Two-Quadrant MDAC Circuit

 

Technical Documents

» Verified Design Reference Guide

» Schematic/Block Diagram

» Test Data

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1005-ND American P.C.B Company TIPD137 PCB FOR TI REF DESIGN TIPD137 1 Buy Now
296-17645-1-ND Texas Instruments DAC8811ICDGKT IC DAC 16BIT MULTIPLYING 8VSSOP 1 Buy Now
OPA2277UA-ND Texas Instruments OPA2277UA IC OPAMP GP 1MHZ 8SOIC 1 Buy Now
490-3373-1-ND Murata Electronics North America GRM31CR61E106KA12L CAP CER 10UF 25V 10% X5R 1206 3 Buy Now
478-1567-1-ND AVX Corporation 12063C105KAT2A CAP CER 1UF 25V 10% X7R 1206 3 Buy Now
478-7899-1-ND AVX Corporation 06033C101KAT2A CAP CER 100PF 25V 10% X7R 0603 3 Buy Now
399-1281-1-ND Kemet C0603C104K3RACTU CAP CER 0.1UF 25V 10% X7R 0603 3 Buy Now
490-1513-1-ND Murata Electronics North America GRM188R71H123KA01D CAP CER 0.012UF 50V 10% X7R 0603 1 Buy Now
SAM1029-04-ND Samtec Inc TSW-104-07-G-S CONN HEADER 4POS .100" SGL GOLD 1 Buy Now
ED1514-ND On Shore Technology Inc ED555/2DS TERMINAL BLOCK 3.5MM 2POS PCB 5 Buy Now
311-10KNFCT-ND Yageo RT0805BRB0710KL RES 10K OHM 1/8W .1% 0805 SMD 1 Buy Now
541-20.0KCCT-ND Vishay Dale CRCW080520K0FKEA RES 20.0K OHM 1/8W 1% 0805 SMD 10 Buy Now
5010K-ND Keystone Electronics 5010 TEST POINT PC MULTI PURPOSE RED 3 Buy Now
5011K-ND Keystone Electronics 5011 TEST POINT PC MULTI PURPOSE BLK 3 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

Powering PLC I/O Module with LM5017 Flybuck

PMP7993
The LM5017 Flybuck reference design provides multiple isolated outputs to supply the bias voltage needed in a PLC I/O module. It generates 4 isolated outputs: ±15V@50mA and ±5V@100mA; it can cover most of the required voltage rails in the I/O module, such as the OP-AMP, DAC bias, RS-485 transmitter and digital isolator power supplies. In the Flybuck, the regulation is done on the primary side, and thus no opto-coupler is needed. The overall load/line regulation for each output is within +/-5%. The input voltage range is from 17V to 32V.

Features

» Ideal for PLC I/O modules, or industrial applications requiring multiple bias supplies

» Quad isolated outputs, +/-15V@50mA, +/-5V@100mA

» 17-32V suggested operating range

» 9-100V input voltage capability with LM5017

» +/-5% Vout regulation accuracy across line and load variations

 

Technical Documents

» Schematic/Block Diagram

» Test Data

» PCB

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1007-ND American P.C.B Company PMP7993 PCB FOR TI REF DESIGN LM5017 1 Buy Now
296-35134-5-ND Texas Instruments LM5017MR/NOPB IC REG BUCK SYNC ADJ 0.6A 8SOPWR 1 Buy Now
490-8627-1-ND Murata Electronics North America GRM32CR72A105KA35L CAP CER 1UF 100V 10% X7R 1210 1 Buy Now
399-3486-1-ND Kemet C0805C104K1RACTU CAP CER 0.1UF 100V 10% X7R 0805 1 Buy Now
490-6518-1-ND Murata Electronics North America GRM31CR71E106KA12L CAP CER 10UF 25V 10% X7R 1206 1 Buy Now
490-3331-1-ND Murata Electronics North America GRM21BR71E225KA73L CAP CER 2.2UF 25V 10% X7R 0805 5 Buy Now
399-5090-1-ND Kemet C0603C105K4PACTU CAP CER 1UF 16V 10% X5R 0603 1 Buy Now
490-8626-1-ND Murata Electronics North America GRM188R71E102KA01D CAP CER 1000PF 25V 10% X7R 0603 1 Buy Now
490-1512-1-ND Murata Electronics North America GRM188R71H103KA01D CAP CER 10000PF 50V 10% X7R 0603 1 Buy Now
720-1045-1-ND Vishay Vitramon VJ1210Y102KXGAT5Z CAP CER 1000PF 1KV 10% X7R 1210 1 Buy Now
SDM10U45-FDICT-ND Diodes Incorporated SDM10U45-7 DIODE SCHOTTKY 40V 0.1A SOD523 1 Buy Now
DFLS1200DICT-ND Diodes Incorporated DFLS1200-7 DIODE SCHOTKY 200V 1A POWERDI123 2 Buy Now
568-4104-1-ND NXP Semiconductors PMEG6010CEH,115 DIODE SCHOTTKY 60V 1A SOD123F 2 Buy Now
5000K-ND Keystone Electronics 5000 TEST POINT PC MINI .040"D RED 3 Buy Now
1502-2K-ND Keystone Electronics 1502-2 TERMINAL DBL TURRET .109"L BRASS 10 Buy Now
5001K-ND Keystone Electronics 5001 TEST POINT PC MINI .040"D BLACK 1 Buy Now
541-10.0KHCT-ND Vishay Dale CRCW060310K0FKEA RES 10.0K OHM 1/10W 1% 0603 SMD 10 Buy Now
541-20.0KHCT-ND Vishay Dale CRCW060320K0FKEA RES 20.0K OHM 1/10W 1% 0603 SMD 10 Buy Now
311-105KHRCT-ND Yageo RC0603FR-07105KL RES 105K OHM 1/10W 1% 0603 SMD 1 Buy Now
541-127KHCT-ND Vishay Dale CRCW0603127KFKEA RES 127K OHM 1/10W 1% 0603 SMD 10 Buy Now
541-340KHCT-ND Vishay Dale CRCW0603340KFKEA RES 340K OHM 1/10W 1% 0603 SMD 10 Buy Now
541-2.00KCCT-ND Vishay Dale CRCW08052K00FKEA RES 2.00K OHM 1/8W 1% 0805 SMD 10 Buy Now
541-1.00KCCT-ND Vishay Dale CRCW08051K00FKEA RES 1.00K OHM 1/8W 1% 0805 SMD 10 Buy Now
1297-1075-1-ND Wurth Electronics Midcom 750313995 TRANS FLYBACK LM5017 WE-FB 1 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

Power Management Reference Design for Xilinx Virtex-6 FPGAs (1.2V @ 1.5A)

PMP5098.3
PMP5098 is a multi-output power supply module that will provide all necessary voltage rails for high-speed Xilinx GTH (11.2 Gbps) serial transceivers on Virtex-6 HXT characterization boards. Four output rails: 1.1V @ 6W (AVCC), 1.1V @ 4W (AVCCRX), 1.2V @ 1.5W (AVTT) and 1.8V @ 5W (AVCCPLL). For each output TPS40400 and dual NexFET are used. TPS40400 has PMBus interface to allow output voltage to be adjusted and current output to be monitored along with other functions. TLC555 timer used to synchronize all outputs to about 480kHz.

Technical Documents

» Schematic/Block Diagram

» Test Data

Bill of Materials

Digi-Key P/NManufacturerManufacturer P/NDescriptionQty NeededAdd to Cart
1512-1009-ND American P.C.B Company PMP5098 PCB FOR TI REF DESIGN 1 Buy Now
296-29246-1-ND Texas Instruments TPS40400RHLR IC REG CTRLR BUCK PWM VM 24-QFN 4 Buy Now
296-1337-5-ND Texas Instruments TLC555ID IC OSC SGL TIMER 2.1MHZ 8-SOIC 1 Buy Now
296-24255-1-ND Texas Instruments CSD16411Q3 MOSFET N-CH 25V 56A 8-SON 3 Buy Now
296-25260-1-ND Texas Instruments CSD16301Q2 MOSFET N-CH 25V 6-SON 5 Buy Now
399-7918-1-ND Kemet C0603C470K5GACTU CAP CER 47PF 50V 10% NP0 0603 4 Buy Now
399-1084-1-ND Kemet C0603C152K5RACTU CAP CER 1500PF 50V 10% X7R 0603 4 Buy Now
399-1091-1-ND Kemet C0603C103K5RACTU CAP CER 10000PF 50V 10% X7R 0603 4 Buy Now
311-1365-1-ND Yageo CC0805KKX7R7BB105 CAP CER 1UF 16V 10% X7R 0805 8 Buy Now
311-1341-1-ND Yageo CC0603KRX7R8BB104 CAP CER 0.1UF 25V 10% X7R 0603 10 Buy Now
587-1385-1-ND Taiyo Yuden JMK325BJ226MY-T CAP CER 22UF 6.3V 20% X5R 1210 7 Buy Now
399-7927-1-ND Kemet C0603C472K3RACTU CAP CER 4700PF 25V 10% X7R 0603 4 Buy Now
490-1887-1-ND Murata Electronics North America GRM32ER60J476ME20L CAP CER 47UF 6.3V 20% X5R 1210 9 Buy Now
1276-1048-1-ND Samsung Electro-Mechanics America CL10C221JB8NNNC CAP CER 220PF 50V 5% NP0 0603 1 Buy Now
BAT54HT1GCT-ND Vishay Semiconductor Diodes Division BAT54HT1G DIODE SCHOTTKY 30V 0.2A SOD323 1 Buy Now
160-1176-1-ND Lite-On Inc LTST-C170CKT LED RED CLEAR 0805 SMD 1 Buy Now
SAM8746-ND Samtec Inc MPS-08-7.70-01-L-V CONN RCPT 8POS 5.00MM PCB SLDR 1 Buy Now
541-1267-1-ND Vishay Dale IHLP2020CZER1R5M01 INDUCTOR POWER 1.5UH 7.2A SMD 1 Buy Now
541-1268-1-ND Vishay Dale IHLP2020CZER2R2M01 INDUCTOR POWER 2.2UH 5.8A SMD 2 Buy Now
541-1050-1-ND Vishay Dale IHLP1616BZER2R2M11 INDUCTOR POWER 2.2UH 3.25A SMD 1 Buy Now
2N7002KCT-ND Fairchild Semiconductor 2N7002K MOSFET N-CH 60V 300MA SOT23 5 Buy Now
P12.1KDBCT-ND Panasonic Electronic Components ERA-3AEB1212V RES 12.1K OHM 1/10W .1% 0603 SMD 2 Buy Now
P10KDBCT-ND Panasonic Electronic Components ERA-3AEB103V RES 10K OHM 1/10W .1% 0603 SMD 5 Buy Now
311-1.00KHRCT-ND Yageo RC0603FR-071KL RES 1.00K OHM 1/10W 1% 0603 SMD 4 Buy Now
311-110KHRCT-ND Yageo RC0603FR-07110KL RES 110K OHM 1/10W 1% 0603 SMD 1 Buy Now
311-11.0KHRCT-ND Yageo RC0603FR-0711KL RES 11.0K OHM 1/10W 1% 0603 SMD 1 Buy Now
311-10.0KHRCT-ND Yageo RC0603FR-0710KL RES 10.0K OHM 1/10W 1% 0603 SMD 8 Buy Now
311-82GRCT-ND Yageo RC0603JR-0782RL RES 82 OHM 1/10W 5% 0603 SMD 2 Buy Now
311-0.0GRCT-ND Yageo RC0603JR-070RL RES 0.0 OHM 1/10W JUMP 0603 SMD 10 Buy Now
311-100HRCT-ND Yageo RC0603FR-07100RL RES 100 OHM 1/10W 1% 0603 SMD 8 Buy Now
311-36.5KHRCT-ND Yageo RC0603FR-0736K5L RES 36.5K OHM 1/10W 1% 0603 SMD 5 Buy Now
311-18.2KHRCT-ND Yageo RC0603FR-0718K2L RES 18.2K OHM 1/10W 1% 0603 SMD 4 Buy Now
311-6.8GRCT-ND Yageo RC0603JR-076R8L RES 6.8 OHM 1/10W 5% 0603 SMD 1 Buy Now
1276-5014-1-ND Samsung Electro-Mechanics America RC1608J100CS RES 10 OHM 1/10W 5% 0603 7 Buy Now
A103274CT-ND TE Connectivity 7-1622825-1 RES 0.33 OHM 1/4W 5% 1206 1 Buy Now
311-1.0ERCT-ND Yageo RC1206JR-071RL RES 1.0 OHM 1/4W 5% 1206 SMD 3 Buy Now
311-49.9HRCT-ND Yageo RC0603FR-0749R9L RES 49.9 OHM 1/10W 1% 0603 SMD 8 Buy Now
311-6.65KHRCT-ND Yageo RC0603FR-076K65L RES 6.65K OHM 1/10W 1% 0603 SMD 1 Buy Now
311-3.92KHRCT-ND Yageo RC0603FR-073K92L RES 3.92K OHM 1/10W 1% 0603 SMD 2 Buy Now
311-2.49KHRCT-ND Yageo RC0603FR-072K49L RES 2.49K OHM 1/10W 1% 0603 SMD 4 Buy Now
311-15.4KHRCT-ND Yageo RC0603FR-0715K4L RES 15.4K OHM 1/10W 1% 0603 SMD 1 Buy Now
P23.7KHCT-ND Panasonic Electronic Components ERJ-3EKF2372V RES 23.7K OHM 1/10W 1% 0603 SMD 1 Buy Now
P4.99KDBCT-ND Panasonic Electronic Components ERA-3AEB4991V RES 4.99K OHM 1/10W .1% 0603 SMD 1 Buy Now
311-348HRCT-ND Yageo RC0603FR-07348RL RES 348 OHM 1/10W 1% 0603 SMD 1 Buy Now
5015KCT-ND Keystone Electronics 5015 PC TEST POINT MINIATURE SMT 19 Buy Now
SAM8744-ND Samtec Inc BSE-040-01-L-D-A CONN RECEPT 40POS .031" SMT GLD 1 Buy Now
Buy Build It Kit

Clicking Buy Build It Kit will add the full bill of materials, including blank PCB and all components, to your shopping cart.
This kit will include everything you need to construct the fully assembled TI Design.

back to top

Choose a Fully Assembled Evaluation Board

 

SensorTag
Reference Design

CC2541 SensorTag

Keyfob
Reference Design

CC2541 Keyfob Reference Design

RFID & NFC Reader


NFC & RFID Card

Connected Ethernet,
USB, and LCD

Connected Ethernet, USB, and LCD

DLP LightCrafter 4500


Accurate Point Cloud Generation

3-Phase Brushless
Motor Control

Three-Phase Motor Control

Dynamic NFC Tag


Near Field Communication

LV Brushed
Motor Design

Low Voltage Brushed Motor System

Advanced Haptic Driver


Advanced haptic driver

Altera Arria V Power


Altera Arria V GZ FPGA

CC2541 SensorTag Reference Design

Buy Now
CC2541 SensorTag

The Bluetooth® low energy SensorTag from TI is designed to shorten the design time for Bluetooth app development from months to hours. The SensorTag is the first Bluetooth low energy development kit focusing on sensor applications and it is the only kit also targeting smartphone app developers.

Features

» BLE Smart development kit

» Six MEMS sensors

» Ability to download firmware over-the-air directly from a smartphone

» Android, iOS support

» Low-cost kit

 

Technical Documents

» User's Guide

» Schematic/Block Diagram

» Design Guide

back to top

CC2541 Keyfob Reference Design

Buy Now
CC2541 Keyfob Reference Design

The Bluetooth Smart Keyfob is a small-form factor, coin-cell powered mobile accessory with buttons, buzzer, LEDs and accelerometer, demonstrating the use of several of the BLE GATT service profiles, like the proximity and battery service profiles.

Features

» Bluetooth Smart keyfob

» Runs on CR2032 coin cell battery

» PCB antenna

» Two-colored LED

» Buzzer

» Accelerometer

» Two buttons

 

Technical Documents

» Software Developer’s Guide

» Schematic/Block Diagram

» Design Guide

back to top

NFC & RFID Ultra-Low-Power Card Presence Detection Reference Design

Buy Now
NFC & RFID Card

This reference design, featuring the TRF79xxA paired with an MSP430 microcontroller, is a fully-functional, battery-operad RFID & NFC reader. This design features in-depth details on how to add NFC/RFID capabilities to an existing design by adding a simple circuit and small firmware control logic loops.

Features

» Ultra-Low Power consumption for battery-operated applications

» Includes PC-side GUI for full evaluation

» Leverages 13.56MHz NFC/RFID TRF7970A Transceiver IC, which can be leveraged worldwide

» Includes complete HW and SW design files, with test data

» This reference design can use almost any MSP430. Only a parallel or SPI interface is required to interface between the TRF7970A transceiver and MSP430 MCU.

 

Technical Documents

» Schematic/Block Diagram

» Design Guide

» Application Note

back to top

Connected Ethernet, USB, and LCD Reference Design

Buy Now
Connected Ethernet, USB, and LCD

This TI Design will demonstrate several ethernet- and LCD-enabled applications such as remote sensor monitoring, ethernet configuration via web-based and LCD dashboards and aware applications that interface with weather websites.

Features

» Integrated Ethernet MAC+PHY on the Tiva C Series MCU

» USB Full-Speed and USB High-Speed ULPI interfaces available

» Easy-to-use 3.5” LCD touch screen display

» Compatible expansion connectors including Boosterpack, Boosterpack-XL, and EM

» Associated software package with divers, stacks, and over 50 pre-compiled examples

» This development kit comes ready to go out of the box with all the cables and software, and is pre-loaded with an interactive Ethernet enabled weather demo

 

Technical Documents

» Schematic/Block Diagram

» Test Data

back to top

DLP® LightCrafter™ 4500

Buy Now
DLP® LightCrafter™ 4500

The 3D Machine Vision reference design employs Texas Instruments DLP Software Development Kit (SDK) allowing developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) technology with cameras, sensors, motors or other peripherals. The highly differentiated 3D Machine Vision systems utilizes the DLP® LightCrafter™ 4500 evaluation module (EVM), featuring the DLP® 0.45” WXGA chipset, and enables flexible control of high resolution, accurate patterns for industrial, medical, and security applications.

Features

» Integrated API and driver support for DLP chipsets to enable fast and programmable patterns

» Integrated camera support for synchronized captures

» Projector and camera calibration routine

» Structured light algorithms for disparity smap, depth map and point cloud generation

» API Documentation

» Full access to application and source code

 

Technical Documents

» User's Guide

» Schematic/Block Diagram

» Test Data

back to top

Three-Phase Brushless/PMSM High-Current Motor Control Solution with InstaSPIN Software

Buy Now
Three-Phase Motor Control

This reference design demonstrates a motor control solution for spinning three-phase brushless DC (BLDC) and brushless AC (BLAC) - often referred to as “permanent magnet synchronous (PMSM)” - motors featuring the C2000™ Piccolo™ microcontroller enabled with InstaSPIN-FOC and InstaSPIN-MOTION in ROM and the DRV8301 three-phase motor driver. It provides three half-bridge drivers, each capable of driving two N-type MOSFETs, one for the high side and one for the low side. It supports up to 2.3A sink and 1.7A source peak current capability and only needs a single power supply with a wide range from 6V to 60V. The reference design features a high-performance, power-efficient, cost-effective platform that speeds development for quicker time to market. Applications include CPAP and pumps, e-bikes, e-scooters, medical pumps and drills, power tools, and robotics. This reference design is based on the DRV8301 evaluation kit.

Features

» Operating supply voltage 6V-60V

» 2.3A sink and 1.7A source gate drive current capability

» Integrated dual-shunt current amplifiers with adjustable gain and offset

» Integrated buck converter to support up to 1.5A external load

» Isolated SPI and CAN interfaces

» Fully-functional evaluation board includes software, hardware design files, quick start graphical interface, and step-by-step documentation

 

Technical Documents

» Hardware Reference Guide

» Schematic/Block Diagram

» Design Guide

back to top

Dynamic Near Field Communication (NFC) Type 4B Tag

Buy Now
Near Field Communication

This dynamic Near Field Communication (NFC) tag design outlines the required components, layout considerations, and provides firmware examples to implement NFC into applications such as Bluetooth® and Wi-Fi® pairing, equipment configuration and diagnostics, or as a general purpose NFC data interface. The documentation, hardware, and example code provided allows the designer to quickly implement NFC functionality with an MSP430 or other MCU of choice.

Features

» NFC Tag Type 4B compliant design

» ISO14443B compliant 13.56-MHz RF interface supports up to 848 kbps for fast data transfer

» Code examples to write and read NDEF messages to internal SRAM

» 3kB SRAM for a large variety NDEF message types

» Interrupt register and output pin to indicate NDEF read or write completion for further processing

» This design is tested and includes firmware, hardware design, and a user's guide

 

Technical Documents

» User's Guide

» Schematic/Block Diagram

» Test Data

back to top

Low Voltage Brushed Motor System

Buy Now
Low Voltage Brushed Motor System

This brushed motor system implements an MSP430 microcontroller, a DRV8837 brushed DC motor driver, and a 12V brushed motor. It is suitable for applications requiring up to 10300 RPM under no load condition. The system is 19 x 33 mm, excluding the motor, making it ideal for applications that require a small footprint. Motor power supply voltage support is 1.8V to 11V, and max current is 1.8A. Several configuration options allow for easy control over the speed of the motor's rotation, changing the direction of rotation, and sending the system into a low power state when not in operation to reduce power consumption. The motor drive stage has integrated protection from short-circuit, shoot-through, under-voltage, and over-temperature.

Features

» Compact system design of 19x33 mm

» Integrated power FETs support 1.8V to 11V and 1.8A

» Motor speed is easily controlled by the PWM (IN/IN) input interface

» Low MOSFET on-Resistance of 280 mΩ

» Integrated protection for short-circuit, shoot-through, under-voltage, and over-temperature

 

Technical Documents

» Schematic/Block Diagram

» Test Data

back to top

Advanced haptic driver simplifies tactile feedback design in consumer and industrial

Buy Now
Advanced haptic driver

This haptic driver reference design for LRA and ERM motors helps eliminate the design complexities of haptic motor control with features like reduced solution size, high efficiency output drive, closed-loop motor control, quick device startup and auto-resonance frequency tracking. This reference design board can be used for developing, testing and demonstrating motor-based haptic effects for systems with capacitive touch buttons and other interfaces. It also provides an easy way to compare ERM and LRA haptic effects.

Features

» Preconfigured capacitive touch and haptic feedback demonstration/evaluation system

» Easy start up within minutes

» Includes both ERM and LRA haptic actuators for easy comparison

» Supports custom-designed waveforms and external actuators for prototyping and development

 

Technical Documents

» User's Guide

» Schematic/Block Diagram

» Test Data

back to top

Altera Arria V GZ FPGA Discrete Power Solution Reference Design

Buy Now
Altera Arria V GZ FPGA

The PMP9357 reference design is a complete power solution for Altera's Arria V series FPGAs. This design uses several TPS54620 synchronous step down converters, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. To provide correct power sequencing, a UCD90120A power supply sequencer/monitor is used and can be controlled through I2C.

Features

» Provides all the power rails needed to power an Altera Arria V FPGA

» Design optimized to support a 5V input

» Very high density PCB design saving board area

» Optimum combination of switching regulators and LDOs provides the best power distrubution tree

» Supports DDR3 memory device

» This design is tested and ready to power up an Arria V FPGA

 

Technical Documents

» User's Guide

» Schematic/Block Diagram

» Test Data

back to top

Videos