TI Solutions For Your Industrial Transceiver Needs

Texas Instruments provides Interface IC solutions ranging from analog and digital CAN chips, USB 3.0, interface serial, digital interface, circuit interface, isolators, LVDS, ESD/EMI protection, and more industry standard products.

Ethernet is everywhere and Texas Instruments has an extensive portfolio of Ehternet PHYs to choose from. Rich features include Real Time and IEEE 1588 support, FastLink™ (Force) and FastLink Drop Modes and Fiber (FX) Support. These products are rugged and reliable offering on-board cable diagnostics, excellent jitter performance and extremely low and deterministic latency. Whether you are designing for Industrial, Test and Measurement, Telecom, Computing and Consumer or Transportation, Mil-Aero TI has the product to meet your needs.

Industrial Ethernet Solutions

TLK105/106 - Industrial Temp, Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver

TLK105 296-34925-1-ND IC TXRX IND ETHERNET PHY 32QFN Datasheet
TLK106 296-34926-1-ND IC TXRX IND ETHERNET PHY 32QFN Datasheet
  • FastLink loss detection time < 10us, is EtherCAT, ProfiNET and SERCOSIII friendly
  • IEEE802.3 Compliance, Multiple Fast link up configurations: Fast ANEG, Fast Force AMDIX provide ease of use and quick establishment of link
  • Extended cable reach to 150m
  • 32-pin QFN Package (5mm x 5mm) - TLK105: -40° to 85C° and TLK106:-40° to 105C° Supports Industrial and extended temp ranges in small package
  • Offers power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.5V power supplies for reduced power operation.

Tools: TLK110CUSEVM

IBIS Model: TLK105 IBIS Model

DP83848I - Industrial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver

DP83848I DP83848IVVX/NOPBCT-ND TXRX ETHERNET PHYTER IND 48LQFP Datasheet
  • Excellent jitter tolerance for real-time communication: <3ns Rx clock jitter!
  • Auto-MDIX for 10/100 Mbps provides auto-negotiation to determines proper configuration for Tx and Rx of data
  • Temperature options over extended range, -40 to 125C
  • 48 pin QFP package options
  • Automotive AEC-Q Grade 2 version available

Tools: DP83848I-POE-EK

Software: PHYTERA-ETHERNETINTEGRITY-SW - PHYTER® Ethernet Integrity Utility

Application Notes: AN-1469 PHYTER® Design & Layout Guide | AN-1499 DP83846 to DP83848C/I/YB PHYTER System Rollover Document | AN-1507 DP83848 and DP83849 100Mb Data Latency | AN-1519 DP83848 PHYTER® Transformerless Ethernet Operation

Communication Ethernet Solutions

DP83848J - PHYTER Mini LS Commercial Temperature Single Port 10/100 Mb/s Ethernet Transceiver

DP83848J DP83848JSQ/NOPBCT-ND IC TXRX ETHERNET PHYTER 40-LLP Datasheet
  • Excellent jitter tolerance with real-time communication: <3ns Rx clock jitter!
  • Deterministic, low transmit and receive latency
  • Auto-MDIX for 10/100 Mbps
  • MII/RMII/SNI MAC interfaces
  • JTAG (IEEE 1149.1) support
  • <270mW typical power consumption

User Guide: DP83848J User Guide

Software: DP83848J/K POE Netlist

IBIS Model: DP83848J IBIS Model

Video: Ethernet Portfolio Overview

DP83848M - DP83848M PHYTER Mini - Commercial Temperature Single 10/100 Mb/s Ethernet Transceiver

DP83848M DP83848MSQ/NOPBCT-ND IC TXRX ETHERNET PHYTER 40-LLP Datasheet
  • Low-power 3.3V, 0.18m CMOS technology
  • Auto-MDIX for 10/100 Mb/s
  • Energy Detection Mode
  • 3.3V MAC Interface
  • RMII Rev. 1.2 Interface (configurable)
  • MII Interface

Tools: DP83848M-MAU-EK

Software: PHYTER® Ethernet Integrity Utility

User Guide: DP83848M User Guide

Application Notes: DP83848M/T/H PHYTER® Small Form Factor 10/100 Single Port Physical Layer Product

Video: Ethernet Portfolio Overview

DP83640/630 - Precision PHYTER - IEEE 1588 Precision Time Protocol Transceiver

DP83640 296-35241-1-ND TXRX PHY IEEE 1PORT 1588 48-LQFP Datasheet
DP83630 DP83630SQE/NOPBCT-ND TXRX PHY IEEE 1PORT 1588 48LLP Datasheet
  • Deterministic, low transmit and receive latency
  • Selectable frequency synchronized clock output
  • Dynamic Link Quality monitoring
  • TDR based Cable Diagnostic and Cable Length Detection
  • 10/100 Mb/s packet BIST (Built in Self Test)

Tools: DP83640T-EVK

Software: DP83640 Software Design Guide and C Software Reference Library | Software: PHYTERA-ETHERNETINTEGRITY-SW - PHYTER® Ethernet Integrity Utility

Application Notes: AN-1469 PHYTER® Design & Layout Guide (Rev. C)| AN-1540 Power Measurement of Ethernet Physical Layer Products | AN-1548 PHYTER 100 Base-TX Reference Clock Jitter Tolerance

Texas Instruments provides a broad portfolio of RS485 and CAN transceivers for use in your industrial applications. Different options of supply voltage, features and packages enable users to select the device that meets their system requirements. Here are some of the TI's latest offerings:

  Features Data Rate (Max) Temp Range Supply Voltage Package Type  
RS485 Family
SN65HVD72
SN65HVD75
SN65HVD78
IEC ESD, Half duplex 0.25 Mbps
20 Mbps
50 Mbps
–40°C to 125°C 3.3V SOIC-8, MSOP-8,
SON-8
Buy NowDatasheet
SN65HVD82 IEC ESD, Half duplex 0.25 Mbps –40°C to 85°C 5V SOIC-8 Buy NowDatasheet
SN65HVD37 Low power, Full duplex 20 Mbps –40°C to 85°C 3.3V SOIC-14 Buy NowDatasheet
CAN Family
SN65HVD255
SN65HVD256
Short prop delay, Fast loop times, RXD supply input 2 Mbps –40°C to 125°C 5V SOIC-8 Buy NowDatasheet
SN65HVD257 Short prop delay, Fast loop times, Functional safety 2 Mbps –40°C to 125°C 5V SOIC-8 Buy NowDatasheet
SN55HVD251 Small package, high temperature range 1 Mbps –55°C to 125°C 5V SON-8 Buy NowDatasheet

For more devices, refer to the CAN Reference Guide or RS-485 Reference Guide.

SN65HVD82 - 5V supply, Half-Duplex RS-485 with IEC ESD Protection

SN65HVD82 296-35043-1-ND IC TXRX ROBUST RS485 ESD 8SOIC Datasheet
  • Bus I/O Protection
    • ±16kV HBM protection
    • ±12kV IEC61000-4-2 Contact Discharge
    • ±4kV IEC61000-4-4 Fast Transient Burst
  • Large Receiver Hysteresis (60mV typ) for Noise Rejection
  • Low Power Consumption (<1 μA Standby Current & <1 mA Quiescent Current)
  • Signaling Rate Optimized for 250 kbps

Tools: SN65HVD72EVM | RS485-HF-DPLX-EVM

Videos: One-Minute RS-485: Selecting Speed Grade | One Minute RS-485 Common Mode Voltage | One Minute RS-485 Receiver Failsafe | One Minute RS-485 Supply Current | One Minute RS-485 Introduction

SN65HVD37 - Low-Power 3.3V Supply Full-Duplex RS-485 Transceiver

SN65HVD37 296-30073-1-ND IC DVR/RCVR RS485 14SOIC Datasheet
  • Low quiescent current (<1mA), 50% lower than competition
  • Low-Current Standby Mode: <1 µA Typical
  • High receiver hysteresis (60mV typical), 4X competition provides higher noise immunity
  • Driver Output Transition Times Optimized for Signaling Rate up to 20 Mbps

Tools: SN65HVD22EVM

Videos: One-Minute RS-485: Selecting Speed Grade | One Minute RS-485 Common Mode Voltage | One Minute RS-485 Receiver Failsafe | One Minute RS-485 Supply Current | One Minute RS-485 Introduction

SN65HVD255/6 - 5V Turbo CAN Transceiver with Fast Loop Times for Fast Data Rates and Highly Loaded Networks

SN65HVD255 296-30092-1-ND IC TXRX CAN 5V HS 8SOIC Datasheet
SN65HVD256 296-30093-1-ND IC TXRX CAN 5V HS 8SOIC Datasheet
  • Extremely short propagation delay times and fast loop times for data rates up to 2Mbps
  • CAN FD ready enabling >2Mbps data rates
  • Next generation for SN65HVD251 and SN65HVD1050
  • "Ideal Passive" behavior when unpowered
  • TXD dominant time out feature while supporting data rates to 10kbps (CANopen)
  • Special features: I/O level shifting (HVD256)

Tools: SN65HVD255DEVM

SN65HVD257 - Turbo CAN Transceiver with Fast Loop Times for Fast Data Rates and Features for Functional Safety & Redundancy

SN65HVD257 296-34886-1-ND IC TXRX CAN 5V HS 8SOIC Datasheet
  • Extremely short propagation delay times and fast loop times for data rates up to 2Mbps
  • CAN FD ready enabling >2Mbps data rates
  • TXD and RXD dominant time out protection
  • FAULT output pin for fault indication to host processor
  • Enables use in redundant & multi-topology CAN networks

Tools: SN65HVD255DEVM | SN65HVD257EVM

SN55HVD251 - Industrial CAN Transceiver with Wider Temperature Range and Smallest Package

SN55HVD251 296-27215-1-ND IC TXRX CAN 5V 8SON Datasheet
  • Improved replacement for the PCA82C250 and PCA82C251
  • Bus-Fault Protection of ±36 V
  • Increased temperature range from -55C° to 125C°
  • 50% reduction in package size saves board space

Accelerate Time-to-Market with Easy-to-Use Video Solutions.

Texas Instruments is a total solutions provider to the professional and broadcast video industry and offers the most comprehensive analog, mixed-signal, and DSP solutions portfolio of energy-efficient, easy-to-use products that save design time and reduce development cost

SN65DSI84 - MIPI DSI Bridge to FlatLink LVDS Single Channel DSI to Dual-Link LVDS Bridge

SN65DSI84 SN65DSI84ZQER-ND IC BRIDGE DSI-FLATLINK 64BGA Datasheet

Click to enlarge
  • Implements MIPI D-PHY Version 1.00.00 Physical Layer Front-End and Display Serial Interface (DSI) Version 1.02.00
  • Suitable for 60 fps WUXGA 1920 x 1200 Resolution at 18 bpp and 24 bpp Color, 60 fps 1920 x 1080 at 18 bpp and 24 bpp
  • LVDS Output Clock Range of 25 MHz to 154 MHz in Dual-Link or Single-Link Modes
  • Low Power Features Include SHUTDOWN Mode, Reduced LVDS Output Voltage Swing, Common Mode, and MIPI® Ultra-Low Power State (ULPS) Support
  • Packaged in 64-pin 5x5mm PBGA (ZQE)

Tools: SN65DSI85 Hspice Model | DSI Tuner

Videos: Live From CES 2013-Mobile Tablet Interface

Application Notes: SN65DSI8x Video Configuration Guide and Configuration Tool Software Users Manual

SN65DSI85 - MIPI DSI Bridge to FlatLink LVDS

SN65DSI85 SN65DSI85ZQER-ND IC BRIDGE DSI-FLATLINK 64BGA Datasheet

Click to enlarge
  • Implements MIPI® D-PHY Version 1.00.00 Physical Layer Front-End and Display Serial Interface (DSI) Version 1.02.00
  • Suitable for 60 fps WQXGA 2560 x 1600 Resolution at 18 bpp and 24 bpp Color, and WUXGA 1920 x 1200 Resolution with 3D Graphics at 60 fps (120 fps Equivalent)
  • Supports Dual Channel DSI ODD or EVEN and LEFT or RIGHT Operating Modes
  • LVDS Output Clock Range of 25 MHz to 154 MHz in Dual-Link or Single-Link Mode
  • Low Power Features Include SHUTDOWN Mode, Reduced LVDS Output Voltage Swing, Common Mode, and MIPI® Ultra-Low Power State (ULPS) Support
  • Packaged in 64-pin 5x5mm PBGA (ZQE)

Tools: SN65DSI85 Hspice Model | DSI Tuner

Videos: Live From CES 2013-Mobile Tablet Interface

Application Notes: SN65DSI8x Video Configuration Guide and Configuration Tool Software Users Manual

SN65LVDS301 - Programmable 27-Bit Display Serial Interface Transmitter

SN65LVDS301 296-21491-1-ND IC PROG 27-BIT SERDES TX 80 BGA Datasheet
  • FlatLink 3G serial interface technology, compatible with FlatLink 3G receivers such as SN65LVDS302
  • 24-Bit RGB Data, 3 Control Bits, 1 Parity Bit and 2 Reserved Bits Transmitted over 1, 2 or 3 Differential Lines
  • Effective Data Throughput up to 1755 Mbps, Pixel Clock Range of 4 MHz–65 MHz
  • Three Operating Modes to Conserve Power
  • Active-Mode QVGA 17.4 mW (typ)
  • Active-Mode VGA 28.8 mW (typ)
  • Shutdown Mode ≠ 0.5 µA (typ)
  • Standby Mode ≠ 0.5 µA (typ)
  • Very low EMI meets SAE J1752/3 'M'-spec
  • Packaging: 80 Pin 5mm x 5mm µBGA®

Tools: SN65LVDS301 CAD/CAE Symbols

Videos: Live From CES 2013-Mobile Tablet Interface

SN65LVDS302 - Programmable 27-Bit Display Serial Interface Receiver

SN65LVDS302 296-21492-1-ND IC PROG 27-BIT SERDES RCVR 80 BGA Datasheet
  • Serial Interface Technology, compatible with FlatLink 3G such as SN65LVDS301
  • Supports Video Interfaces up to 24-bit RGB Data and 3 Control Bits Received over 1, 2 or 3 SubLVDS Differential Lines
  • Up to 1.755 Gbps Data Throughput, Pixel Clock Range of 4 MHz–65 MHz
  • Three Operating Modes to Conserve Power
  • Active mode QVGA - 17 mW
  • Typical Shutdown - 0.7 µW
  • Typical Standby Mode - 27 µW Typical
  • Very low EMI meets SAE J1752/3 'Kh'-spec
  • Packaged in 5 mm x 5 mm MicroStar Junior µBGA® with 0,5 mm Ball Pitch

Tools: SN65LVDS302 CAD/CAE Symbols

Videos: Live From CES 2013-Mobile Tablet Interface

SN75LVDS83B - FlatLink 10-135MHz Transmitter

SN75LVDS83B 296-24529-1-ND IC FLATLINK XMITTER 56 TSSOP Datasheet
  • LVDS Display Serdes Interfaces Directly to LCD Display Panels with Integrated LVDS
  • Transfer Rate up to 135Mpps (Mega Pixel Per Second); Pixel Clock Frequency Range 10MHz to 135MHz
  • Suited for Display Resolutions Ranging From HVGA up to HD With Low EMI
  • Operates From a Single 3.3V Supply and 170mW (typ.) at 75MHz
  • Support Spread Spectrum Clocking (SSC), Selectable Rising or Falling Clock Edge Triggered Inputs
  • Compatible with all OMAP2x, OMAP™3x, and DaVinci Application Processor
  • Package Options: 4.5mm x 7mm BGA, and 8.1mm x 14mm TSSOP

Tools: SN75LVDS83B IBIS Model | TI Tablet Solutions (Rev. D)

Videos: SN75LVDS83B FlatLink 10-135 Mhz transmitter for a glueless connection to low-power processors

Application Notes: HDMI/DVI to LVDS Bridge | FlatLink™ Data Transmission System Using SN75LVDS83B/SN75LVDS82/SN75LVDS86A

SN75LVDS83C - FlatLink 10-85MHz Transmitter

SN65HVD82 296-35043-1-ND IC TXRX ROBUST RS485 ESD 8 SOIC Datasheet
  • LVDS Display Serdes Interfaces Directly to LCD Display Panels with Integrated LVDS
  • Transfer Rate up to 85Mpps (Mega Pixel Per Second); Pixel Clock Frequency Range 10MHz to 85MHz
  • Suited for Display Resolutions Ranging From HVGA up to HD With Low EMI
  • Operates From a Single 3.3V Supply and 148mW (typical) at 75MHz
  • Support Spread Spectrum Clocking (SSC), selectable Rising or Falling Clock Edge Triggered Inputs
  • Package: 4.5mm x 7mm BGA

Tools: TI Tablet Solutions (Rev. D)

Videos: Live From CES 2013-Mobile Tablet Interface

Application Notes: HDMI/DVI to LVDS Bridge

SN65LVDS324 - High Definition Image Sensor Receiver

SN65LVDS324 296-35517-1-ND IC HD IMAGE SENSOR RCVR 59 BGA Datasheet
  • Bridges the Interface Between Video Image Sensors and Processors
  • Receives Aptina HiSPi, Panasonic LVDS, or Sony LVDS Interface; Outputs 1.8V CMOS with 10/12/14/16 Bits at 18.5MHz to 162MHz
  • SubLVDS Inputs Support Up To 648Mbps
  • Integrated 100Ω Differential Input Termination
  • Compatible with TI OMAP and DaVinci Including DM385, DM8127, DM36x, and DMVA
  • Packaged in 4.5 x 7mm BGA

Tools: SN65LVDS324 IBIS Model | SN65LVDS324 I2C Calculator(requires Java)

Videos: Live From CES 2013-Mobile Tablet Interface

Application Notes: SN65LVDS324 Implementation Guide

SN65LVDS314 - Programmable 27-Bit Serial-to-Parallel Receiver

SN65LVDS314 296-34921-1-ND IC RCVR SRL/PAR PROG 2-7BIT 64 QFN Datasheet
  • Compatible with FlatLink 3G such as SN65LVDS301 and SN65LVDS311
  • Supports Video Interfaces up to 24-bit RGB Data and 3 Control Bits Received over 1, 2 or 3 SubLVDS Differential Lines
  • Up to 1.755 Gbps Data Throughput with a Pixel Clock Range of 4 MHz–65 MHz
  • Three Operating Modes to Conserve Power
    • Active mode QVGA - 17 mW
    • Typical Shutdown - 0.6 µW
    • Typical Standby Mode - 54 µW Typical
  • Packaged in 8 mm x 8 mm QFN with 0.4 mm pin pitch
  • Very low EMI meets SAE J1752/3 'Kh'-spec

Videos: Live From CES 2013-Mobile Tablet Interface

TI analog USB Interface products are a subset of Analog & Mixed-Signal solutions. This page is your resource to download datasheets, application notes, order samples and use parametric search to research other Interface-related analog solutions

TUSB9261 - 2nd Generation SuperSpeed USB 3.0 to Serial ATA Bridge

TUSB9261 296-28827-ND IC USB3 TO SATA-II BRDGE 64HTQFP Datasheet
  • Universal Serial Bus (USB)
    • USB Attached SCSI Protocol (UASP)
    • USB Mass Storage Class Bulk-Only Transport (BOT)
    • Support for Error Conditions per the 13 Cases (Defined in the BOT Specification)
    • USB Bootability Support
    • USB Human Interface Device (HID
  • SATA Interface
    • Serial ATA Specification Revision 2.6
    • Support for Mass-Storage Devices Compatible With the ATA/ATAPI-8 Specification
  • Integrated ARM Cortex M3 Core with up to 12 GPIOs for End-User Configuration

Tools: TUSB9261DEMO | TUSB926x Default Firmware, U1/U2 Disabled | TUSB926x FlashBurner Utility | TUSB926x SpeedBoost Monitor

Videos: TI knows SuperSpeed USB

SN65LVPE502A - Dual Channel USB3.0 Redriver/Equalizer

SN65LVPE502A SN65LVPE502ARGER-ND IC REDRIVER/EQUALIZER 2CH 24VQFN Datasheet
  • Single Lane USB 3.0 Equalizer/Redriver with selectable Equalization, De-Emphasis and Output Swing Control
  • Low Active Power (U0 state)
    • 315 mW (TYP), VCC = 3.3V
  • USB 3.0 Low Power Support
    • 7 mW (TYP) When no Connection Detected
    • 70 mW (TYP) When Link in U2/U3 Mode
  • Excellent Jitter and Loss Compensation Capability:
    • >40" of Total 4 mil Stripline on FR4
  • Small Foot Print – 24 Pin (4mm x 4mm) QFN Package

Tools: SN65LVPE502A HSpice Model

Videos: Active Copper Cable in Data Center Applications

Digital Isolation is an exciting and heavily industrial field. Texas Instruments has been leading the way with our capacitive-based isolation technology and enhancing our portfolio with high-value items that leverage not only our groundbreaking isolation technology, but also combine them with our existing interface portfolio, creating innovative products the market needs.

ISO76XXFX - 4KVPK High Speed & Very Low Power 3 & 4-Ch Isolators

ISO7631FC 296-35465-1-ND IC DGTL ISO 3CH LOGIC 16SOIC Datasheet
ISO7631FM ISO7631FMDWR-ND IC DGTL ISO 3CH LOGIC 16SOIC Datasheet
ISO7641FC ISO7641FCDWR-ND IC DGTL ISO 4CH LOGIC 16SOIC Datasheet
ISO7640FM ISO7640FMDWR-ND IC DGTL ISO 4CH LOGIC 16SOIC Datasheet
ISO76441FM 296-35966-1-ND IC DGTL ISO 4CH LOGIC 16SOIC Datasheet
  • Integrated SiO2 Dielectric Capacitor
    • 2ns Skew, 200ps Pulse Distortion
    • C-grade: 25 Mb/s, 0.7mA/ch(3.3V), Noise Filter
    • M-grade: 150 Mb/s, 1mA/ch(3.3V), 7ns prop delay,
    • DC Signal Pass with Fail Safe Output-Low
  • Immunity and Certifications
    • High Magnetic Immunity (1E6 > Inductive)
    • CMTI > 25 kV/µs; ESD > 4 kV on All Pins
    • 4kVPK Transient,
    • 1414VPK Working Voltage
    • 2.5 kVRMS per UL1577,
    • 4 kVPK per DIN EN 60747-5-2
    • CSA
  • Power and Package
    • 3.3V and 5V Supply Support, 2.7V (M-grade),
    • Wide-Body SOIC-16 package

Tools: ISO723X724XEVM

Model: ISO76XX (Rev. A) IBIS Model

E2E Forum: Industrial Interface

ISO742x - 4KVPK/2.5 KVRMS, High Speed & Low Power 2-Ch Isolators

ISO7420E 296-28554-ND IC DGTL ISO 2CH LOGIC 8SOIC Datasheet
ISO7421E 296-36600-1-ND IC DGTL ISO 2CH LOGIC 8SOIC Datasheet
ISO7420FE 296-28742-1-ND IC DGTL ISO 2CH LOGIC 8SOIC Datasheet
ISO7421FE 296-28426-ND IC DGTL ISO 2CH LOGIC 8SOIC Datasheet
ISO7420FCC ISO7420FCCD-ND IC DGTL ISO 2CH LOGIC 8SOIC Datasheet
  • Integrated SiO2 Dielectric Capacitor
    • >50Mbps and DC Signal Pass with Fail Safe
    • CC Grade -> Integrated Noise Filter
    • E grade -> 7ns prop delay
    • 1.5mA per channel typical (3.3V)
    • High Magnetic Immunity (1E6 > Inductive)
    • CMTI > 25kV/us | ESD >3kV on all pins
  • Immunity and Certifications
    • 2.5kVrms Iso Rating (UL 1577)
    • 4kVPKTransient (DIN EN 60747-5-2)
    • 400VPK (Unipolar and DC) Working Voltage
    • IEC 61010-1/ 60950-1, 60601-1 & CSA approvals
  • Power and Package
    • 3.3V and 5V Supply Support
    • Narrow-Body SOIC-16 package

Tools: ISO7622XVM

Model: ISO7420 (Rev. A) IBIS Model | IS07421FE IBIS Model

E2E Forum: Industrial Interface

What’s better than Digital Isolation? Combing it with an already critical function in your design, saving you time, space, and money, all the while getting your design closer to crossing the finish line. TI is proud to offer you a great selection of it’s already high precision interface devices in digitally isolated form!

ISO1050 - 2nd Generation SuperSpeed USB 3.0 to Serial ATA Bridge

ISO1050 296-24818-1-ND IC TXRX CAN 5V 8SOP Datasheet
  • Industry's first Isolated CAN transceiver
  • Meets or Exceeds ISO 11898
  • Isolated CAN with Ultra low loop time
  • Very Low EME (Electro-Magnetic Emissions)
  • Silicon Integrated SiO2 Insulation
    • 4kVpk / 2.5kVrms - DUB

Tools: ISO1050EVM

Model: ISO1050 IBIS Model

Solution Guides: CAN Reference Guide | Energy Harvesting: Solar Solutions Guide

Application Notes: Isolated CAN solution by using ISO1050 and SN6501

E2E Forum: Industrial Interface

Videos: ISO1050 Isolated 5-V CAN transceiver

ISO154x - Low-Power Bidirectional I2C Isolators

ISO1540 296-34871-1-ND IC DGTL ISO 4CH I2C 8SOIC Datasheet
ISO1541 296-34872-1-ND IC DGTL ISO 3CH I2C 8SOIC Datasheet
  • Isolated Bidirectional I2C Communication
  • Safety Certifications
    • 2.5kVrms per UL1577
    • 4kVpk per DIN EN 60747-5-2
    • CSA
  • Uni- & Bidirectional Clock
  • Fast Mode Plus (1 MHz) Operation
  • ± 50 kV/s Typical Transient Immunity
  • 4 kV ESD Protection on All Pins
  • Extended Temp Range -40C to 125C
  • 8-pin Narrow-body SOIC package

Tools: ISO154XEVM

Model: ISO1540 IBIS Model

E2E Forum: Industrial Interface

SN6501 - Transformer Driver for Isolated Power Supplies

SN6501 296-30388-1-ND IC REG CONV PWR SUPPLIES SOT23-5 Datasheet
  • Push-Pull Driver for Small Transformers
  • Single 3.3V or 5V Supply
  • High Primary-side Current Drive:
  • 5 V Supply: 350 mA (max)
  • 3.3 V Supply: 150 mA (max)
  • Low Output Ripple Permits Small Output
  • Capacitors
  • Small 5-pin SOT-23 (2.9mm x 2.8mm) Package
  • Wide Temp Range: -40oC to 125oC

Tools: SN6501-3EVM

Model: SN6501 TINA-TI Transient Spice Model

Reference Design:  Reference Design for Powering the Hot Side of an Isolated Current Shunt Monitor

Application Notes: Isolated CAN solution by using ISO1050 and SN6501

E2E Forum: Industrial Interface