The pluggable I/O interface offers significant advantages as a high speed I/O interconnect. With a standard equipment I/O interface and the flexibility of pluggable modules come the options for fiber and copper links, and various data rates and protocols.
TE Connectivity has always been a leader in the development of pluggable I/O standards. TE Connectivity continues to be engaged in new pluggable interface standards to support the rapidly changing market needs for higher bandwidth, and remains and industry leader with the technical expertise required to deliver superior designs for signal integrity and EMI at higher data rates.
TE’s zQSFP+ (z-Quad Small Form-factor Pluggable Plus) connector and cage assembly has been designed for applications in the telecommunications, data center and networking markets that require a high-speed, high-density connector. The interconnect offers four channels of high-speed differential signals with data rates ranging from 25 Gbps up to potentially 40 Gbps, and will support 100 Gbps (4x25 Gbps) Ethernet and 100 Gbps 4X InfiniBand Enhanced Data Rate (EDR) requirements.
The Quad Small Form-factor Pluggable (QSFP) interconnect system from TE Connectivity (TE) is a four-channel package, offering 3 times the density of traditional SFP ports and supports speeds up to 10Gb/s per channel (suitable for 8G Fiber Channel and 10G Ethernet). The system is ideal for switches, routers, and host bus adapters (HBA's) where bandwidth is essential. Our QSFP family includes cages, connectors, and copper and optical cable assemblies for a complete solution, developed within the QSFP MSA (Multi-Source Agreement).
Cages feature enhanced EMI springs that have been proven in our SFP product to effectively contain EMI between both cage-to-bezel and cage-to-module interfaces. Cages are available with options for riding heat sinks (similar to XFP) and lightpipes. Ganged (multi-port) cages are available for additional density gains. All cages use press-fit technology for board termination, and can be used in belly-to-belly (double-sided) applications. An XFP-style gasket is also supported to maintain the cage opening behind the bezel. All QSFP cages will accept copper cables, optical cables, and transceiver modules.
SFP (Small Form-factor Pluggable) I/O Products support the hot swap of various fiber optic and copper based transceivers and cable assemblies into host equipment. SFP products provide a shielded port for Gigabit Ethernet, Fibre Channel, and InfiniBand switches, hubs and host bus adapters. Designs are based on the industry standard SFP Multi-Source Agreement (MSA), of which TE Connectivity (TE) was a founding member.
TE offers SFP cages in single port and multi-port designs for added density. Chassis grounds are achieved through EMI springs at the bezel interface and ensure EMI containment. The SFP board mount connector is a 20 position interface, with surface mount termination or press-fit when integrated into a one-piece cage/connector assembly.
Other options include integrated lightpipes for port indicators and riding heatsinks for improved thermal management.
The TE Connectivity (TE) SFP+ product family extends the use of the Small Form-Factor Pluggable (SFP) interconnect up to 10 Gbps. This system meets the performance requirements of SFF (Small Form-Factor) specification SFF-8431 and supports 8G Fiber Channel, 10G Ethernet, InfiniBand™ standard and Fibre Channel over Ethernet (FCoE) applications. The SFP+ product family includes cable assemblies, cages and connectors.
Our SFP+ direct attach copper cable assemblies provide a cost-effective solution over fiber optics in short reach applications. The design allows for serial data transmission up to 10Gbps in each direction. The mechanical design of the cable braid crimp and EMI skirt suppress EMI radiation. Low power consumption helps make the SFP+ copper cable assembly an economical solution for within rack or rack-to-rack applications. Both passive and active copper cable assemblies are available.
The passive cable assembly design has no signal amplification in the cable assembly. Electronic Dispersion Compensation (EDC) is typically used on host board designs when passive SFP+ copper assemblies are utilized. EDC allows for an extended length of passive cable assemblies. The industry standard EEPROM signature enables the host system to differentiate between a passive copper cable and a fiber optic module.
The active cable assembly design has signal amplification and equalization in the assembly. Active copper assemblies are typically used in host systems that do not employ EDC. Active SFP+ cable assemblies also incorporate Rx LOS and Tx Disable features. As with passive cables, the industry standard EEPROM signature enables the host system to differentiate between an active copper cable and a fiber optic module.
TE Connectivity (TE) led in the mechanical design within the XFP Multi-Source Agreement (MSA). The MSA specifies the mechanical and electrical requirements for the pluggable modules, cage hardware, thermal heat sinks and PCB connector. This technology converts serial electrical signals to external serial optical or electrical signals and is intended to be flexible enough to support OC192/STM-64, 10x Fibre Channel, G.709, and 10G Ethernet.
XFP is a cage/connector/module system that features gasketing for excellent EMI containment, a riding heatsink for thermal dissipation, an intuitive latching system, and a 30 position SMT connector based on the SFP connector design. TE also offers copper cable assemblies that plug directly into an XFP port for lower cost short-reach applications.
TE Connectivity is the lead developer of the connectors and mechanical components for the CFP MSA (Multi Source Agreement), a new high speed pluggable I/O interface. This interconnect system supports 40Gb/s and 100Gb/s, as required by the IEEE 802.3ba specification as well as other developing telecom protocols. The CFP connector features multiple channels, each supporting 10Gb/s with electrical performance surpassing that of existing 10Gb/s interfaces.
The connector interface is a two piece solution consisting of a plug connector which is integrated by optical transceiver suppliers, and a host board receptacle connector. The additional host board components include the receptacle cover, guide rails, external bracket assembly, backer plate and riding heat sink to provide a complete solution. The integrated system provides the mechanical, EMI and thermal performance necessary to support the demanding requirements of the CFP MSA Optical Transceivers and OEM host line cards.
TE Connectivity's CXP connector and cage assembly offers 12 channels of 10 Gbps data rates for 120Gbps of total bandwidth in one-piece press-fit assembly. TE's CXP system complies with InfiniBand CXP 12x QDR and IEEE 100 Gbps Ethernet standards and enables pluggable copper or optical cable options. The system has been engineered for applications in high-speed data environments with EMI gasketing at bezel opening and EMI springs for plug-to receptacle containment. It provides one-step placement to the host board and comes with multiple heat-sink, lightpipe and EMI/dust plug options. Enhanced EF, dual sourced footprint offers reduced cross-talk and improved electrical performance.
TE also offers a complement of fiber optic cable assemblies with CXP fiber paths to interconnect CXP transceivers to CXP, QSFP+ and SFP+ transceivers. All are available with OM2 and OM3 fiber as a standard offering, with OM4 being available upon request.
TE Connectivity and TE connectivity (logo) are trademarks.