Swissbit Supplier Page

C-320 Series CompactFlash Card

32 GByte, Type I Industrial UDMA CompactFlash Card from Swissbit


Swissbit's C-320 Series CompactFlash CardSwissbit's CompactFlash is a small-form-factor, non-volatile memory card which provides high-capacity data storage. Its aim is to capture, retain and transport data, audio, and images, and facilitating the transfer of all types of digital information between a large variety of digital systems. The card operates in three basic modes: PC card ATA I/O mode, PC card ATA memory mode, and True IDE mode. The CompactFlash also supports Advanced Timing modes. Advanced Timing modes are ATA I/O modes that are 100 ns or faster, and ATA Memory modes that are 100 ns or 80 ns. Standard cards are shipped as max. PIO6 and MDMA4 (80 ns) and UDMA4 (30 ns).

If the cards should be used in extended speed modes, they should be qualified on the target system, and the system should fulfill the requirements listed below. It conforms to the PCMCIA Card Specification 2.1 when operating in the ATA I/O mode, and in the ATA Memory mode (Personal Computer Memory Card International Association standard, JEIDA in Japan), and to the ATA specification when operating in True IDE Mode. CompactFlash Cards can be used with passive adapters in a PC-Card Type II or Type III socket. The cards have an internal intelligent controller which manages interface protocols, data storage and retrieval, as well as hardware RS-code Error Correction Code (ECC), defect handling, diagnostics and clock control. The wear-leveling mechanism assures an equal usage of the Flash memory cells to extend their life-time. Once the card has been configured by the host, it behaves as a standard ATA (IDE) disk drive. The hardware RS-code ECC allows to detect and correct 4 symbols per 528 Bytes. The card has a voltage detector and a powerful power-loss management feature to prevent data corruption after power-down. The specification has been realized and approved by the CompactFlash Association (CFA). This non-proprietary specification enables users to develop CF products that function correctly and are compatible with future CF design.

Features
  • Fully compliant with:
    • CompactFlashTM specification 3.0, compatible with specification 4.1
    • PCMCIA specification and PC Card ATA Interface
    • True IDE mode compatible
    • Fix drive (IDE mode) and removable drive (PCMCIA mode) as default in the same card
  • Hot swappable in PCMCIA modes
  • FULL S.M.A.R.T. Interface support for life time monitoring
  • Small form factor
  • Patented power-off reliability
  • Wear-Leveling
  • High reliability
  • Temperature ranges
    • Commercial temperature range: 0 to +70°C
    • Industrial temperature range: -40 to +85°C
  • Controlled BOM and PCN process
  • High performance
  • Power Supply (Low-power CMOS technology)

Digi-Key P/N Manufacturer P/N Description  
1052-1014-ND SFCF4096H1BO2TO-I-D1-523-SMA FLASH SLC UDMA/MDMA/PIO 4 Datasheet
1052-1017-ND SFCF32GBH1BO4TO-I-NC-523-SMA FLASH SLC UDMA/MDMA/PIO 32G
1052-1013-ND SFCF2048H1BO2TO-I-M0-523-SMA FLASH SLC UDMA/MDMA/PIO 2G
1052-1015-ND SFCF8192H1BO2TO-I-Q1-523-SMA FLASH SLC UDMA/MDMA/PIO 8G
1052-1016-ND SFCF16GBH1BO4TO-I-Q1-523-SMA FLASH SLC UDMA/MDMA/PIO 16G