NXP Semiconductors Supplier Page

LPC1100 Series 50-MHz, 32-bit Cortex-M0™ Microcontrollers

NXP Semiconductors and Digi-Key introduce the LPC11C00 Cortex-M0 CAN microcontrollers

LPC11xx Series 50-MHz, 32-bit Cortex-M0™ MicrocontrollersNXP Semiconductors' LPC1111/12/13/14 is one of the world’s first Cortex-M0 based microcontroller series offering users a cost effective, very easy to use 32-bit MCU that is code and tool compatible with other NXP ARM-based MCU products. With 32-bit performance combined with multiple power modes and very low deep-sleep power, the LPC11xx offers industry leading energy efficiency greatly extending battery life. The LPC11xx sets new benchmarks in performance efficiency with dramatically improved code density enabling longer battery life and lower system costs.
  • Overview
  • Features/Applications
  • LPCXpresso Kit
  • Buy Now
  • Related Products


ARM Cortex-M0 processor
  • 50-MHz operation
  • Nested vectored interrupt controller for fast deterministic interrupts
  • Wakeup interrupt controller allows automatic wake from an priority interrupt
  • Three reduced-power modes: sleep, deep-sleep, and deep power-down
  • Up to 32 KB Flash memory
  • Up to 8 KB SRAM
Serial Peripherals
  • UART with fractional baud rate generation, internal FIFO, and RS-485 support
  • SPI Controller with FIFO and multi-protocol capabilities
  • I²C-bus interface supporting full I²C-bus specification and Fast mode plus with a data rate of 1 Mbit/s with multiple address recognition and monitor mode
  • CAN 2.0B C_Can controller with on-chip CANopen drivers
Analog Peripherals
  • 10-bit Analog-to-Digital Converter (ADC) with eight channels and conversion rates up to 250K samples per second
Other peripherals
  • Up to 42 General Purpose I/O (GPIO) pins with configurable pull-up/down resistors and a new, configurable open-drain operating mode
  • Four general purpose counter/timers, with a total of four capture inputs and 13 match outputs
  • Programmable watchdog timer (WDT) with lock-out feature
  • System tick timer
  • Each peripheral has its own clock divider for power savings


  • Serial wire debug and serial wire trace port
  • High-current output driver (20 mA) on one pin
  • High-current sink drivers (20 mA) on two pins
  • Power-On Reset (POR)
  • Single 3.3 V power supply (1.8 V to 3.6 V)
  • Crystal oscillator with an operating range of 1 MHz to 25 MHz
  • Available as 48-pin LQFP package and 33-pin HVQFN package
  • 15 GPIO pins can be used as edge and level sensitive interrupt sources
  • Processor wake-up from deep-sleep mode via interrupts from various peripherals
  • Brownout detect with four separate thresholds for interrupt and forced reset
  • 12 MHz internal RC oscillator trimmed to 1% accuracy that can optionally be used as a system clock
  • PLL allows CPU operation up to the maximum CPU rate without the need for a high-frequency crystal
  • May be run from the main oscillator, the internal RC oscillator, or the watchdog oscillator
  • Integrated PMU (Power Management Unit) to minimize power consumption during sleep, deep-sleep, and deep power-down modes
  • Clock generation unit with divider that can reflect the main oscillator clock, IRC clock, CPU clock, and watchdog clock.


  • Battery-powered systems
  • e-Metering
  • Consumer peripherals
  • Remote sensors
  • 16-bit applications

LPCXpresso Kit

LPCXpresso Overview LPC1300 LPCXpresso imageNXP Semiconductors' low-cost development tool platform provides a quick way to develop advanced, low-power applications using NXP’s highly efficient and low-power LPC microcontrollers. It includes everything to take end users from evaluation to final production. NXP’s low-cost LPCXpresso development tool platform includes an Eclipse-based IDE, an optimized GNU toolchain, and a low-cost target board that features a JTAG debugger. It is an end-to-end solution that makes it easy to develop innovative, low-power applications – from initial evaluation to final production. It is a complete, no-fuss, front-to-back toolchain, ready to run with a single simple install.

Digi-Key P/N Manufacturer P/N Flash Total SRAM
568-4918-ND OM11041

NXP Microcontroller Solution Page

NXP LPC1100 Design Challenge

Buy Now

Digi-Key P/N NXP Part Number Package Memory C_Can Datasheet
Flash RAM
568-4948-ND LPC1114FHN33/301,5 33-HVQFN 32K 8K - Datasheet
568-4949-ND LPC1114FHN33/201,5 33-HVQFN 32K 4K - Datasheet
568-4950-ND LPC1114FBD48/301,1 48-LQFP 32K 8K - Datasheet
568-4951-ND LPC1113FHN33/301,5 33-HVQFN 24K 8K - Datasheet
568-4952-ND LPC1113FHN33/201,5 33-HVQFN 24K 4K - Datasheet
568-4953-ND LPC1113FBD48/301,1 48-LQFP 24K 8K - Datasheet
568-4954-ND LPC1112FHN33/201,5 33-HVQFN 16K 2K - Datasheet
568-4955-ND LPC1112FHN33/101,5 33-HVQFN 16K 4K - Datasheet
568-4956-ND LPC1111FHN33/201,5 33-HVQFN 8K 4K - Datasheet
568-4957-ND LPC1111FHN33/101,5 33-HVQFN 8K 2K - Datasheet
568-5098-ND LPC11C14FBD48/301 48-LQFP 32KB 8K 1 Datasheet

Related Product

Digi-Key P/N NXP Part Number Description Datasheet
568-4859-ND OM11049 BOARD LPCXPRESSO LPC1114 Datasheet

Related Products

LPC1102 32-Bit ARM Microcontroller LPC1102 32-Bit ARM Microcontroller

NXP Semiconductors' LPC1102 is targeted at applications requiring an ultra-miniature board footprint. As the newest member of the highly successful LPC11xx microcontroller family, the LPC1102 delivers the same key features of low power, high performance, and high value while adding the new dimension of miniaturization. The LPC1102, with 32 kB of flash and 8 kB of RAM on-chip, is available in wafer level chip scale packaging (WL-CSP) with dimensions of 2.17 mm x 2.32 mm, a thickness of 0.65 mm, and a pitch of 0.5 mm. More...

LPC1100L 32-Bit MCU LPC1100L 32-Bit MCU

NXP's LPC1100L is a low priced 32-bit MCU solution. This particular MCU is higher value and easier to use than existing 8-/16-bit microcontrollers by its unprecedented performance, simplicity, low power, and more importantly, dramatic reductions in code size for all 8-/16-bit applications. The LPC1100L series offers a seamless entry point for any 8-/16-bit customers looking to start with the scalable ARM architecture throughout their entire range of product development. More...

LPC122x Cortex-M0 microcontrollers LPC122x Cortex-M0 microcontrollers

NXP expands its award-winning and low-power Cortex-M0 microcontroller offerings with the LPC122x series. The LPC122x series adds more features and performances to customers’ applications, including up to 128 kB of flash, DMA, CRC, 4 timers, RTC, comparators, ADC, Fast-Mode-Plus I2C, SPI and a Windowed Watch-dog timer. The LPC122x’s 128 kB flash supports an erase sector as small as 512 bytes. Its 12 MHz internal oscillator with 1% accuracy can optionally be used as a system clock output. More...

Please visit Digi-Key's Microcontroller Solutions Technology Zone to learn more about NXP Semiconductors' microcontroller products.