Micrel Supplier Page

MIC22205 Buck Regulator


Micrel's MIC22205 is a 2 A, integrated switch, high-efficiency, synchronous buck regulator that is frequency programmable up to 4 MHz


Micrel's MIC22205 Buck RegulatorThe Micrel MIC22205 is a high-efficiency, 2 A, integrated switch, synchronous buck (step-down) regulator. This device is optimized for the highest possible efficiency, achieving more than 95% efficiency while still switching at 1 MHz. The ultra-high speed control loop keeps the output voltage within regulation, even under the extreme transient load swings commonly found in FPGAs and low-voltage ASICs. The output voltage is pre-bias safe and can be adjusted down to 0.7 V to address all low-voltage power needs.

The MIC22205 offers a full range of sequencing and tracking options. The Enable/Delay (EN/DLY) pin, combined with the Power Good (PG) pin, allows multiple outputs to be sequenced in any way during turn-on and turn-off. The Ramp Control™ (RC) pin allows the device to be connected to another product in the MIC22xxx and/or MIC68xxx family, to keep the output voltages within a certain ΔV on start-up.

Features
  • Input voltage range: 2.9 V to 5.5 V
  • Output voltage adjustable down to 0.7 V
  • Safe start-up into a pre-biased output
  • Full sequencing and tracking capability
  • Efficiency >95% across a broad load range
  • Thermal-shutdown and current-limit protection
  • -40°C to +125°C junction temperature range
  • Output load current up to 2 A
  • 12-pin 3 mm x 3 mm MLF®
  • Power Good output
  • Easy RC compensation
  • 100% maximum duty cycle
  • Ultra-fast transient response
  • Fully-integrated MOSFET switches

Digi-Key P/N Manufacturer P/N Packaging Description
576-3966-1-ND MIC22205YML TR Cut Tape IC REG SYNC BUCK 2A HIEFF 12MLF Datasheet
Available in Tape & Reel (-2-ND), Cut Tape (-1-ND), and custom Digi-Reel® (-6-ND)