Intersil Supplier Page

ISL32600E Transceivers


Intersil's ISL32600E series of 1.8 V to 3.3 V, micro-power, ±15 kV ESD, +125°C, slew-rate limited RS-485/RS-422 transceivers


Intersil's ISL32600E TransceiversThe Intersil ISL32600E series are ±15 kV IEC61000, ESD protected, micro power, wide supply range transceivers for differential communication. The ISL32600E operates with VCC ≥ 2.7 V and has maximum supply currents as low as 100 µA with both the transmitter (Tx) and receiver (Rx) enabled. These transceivers have very low bus currents, so they present less than a 1/8 unit load to the bus. This allows more than 256 transmitters on the network, without violating the RS-485 specification’s 32 unit load maximum.

Rx inputs feature symmetrical switching thresholds, and up to 65 mV of hysteresis, to improve noise immunity and to reduce duty cycle distortion in the presence of slow moving input signals. The Rx input common mode range is the full -7 V to +12 V RS-485 range for supply voltages ≥ to 3 V.

Hot Plug circuitry ensures that the Tx and Rx outputs remain in a high impedance state while the power supply stabilizes.

This transceiver family utilizes slew rate limited drivers, which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications.

The ISL32600E is configured for full duplex (separate Rx input and Tx output pins) applications. The half duplex versions multiplex the Rx inputs and Tx outputs to allow transceivers with output disable functions in 8 Ld packages.

Features Applications
  • Single 1.8 V, 3 V, or 3.3 V supply
  • IEC61000 ESD protection on RS-485 IO pins: ±5 kV
    • Class 3 ESD levels on all other pins: >8 kV HBM
  • Symmetrical switching thresholds for reduced duty cycle distortion
  • Up to 65 mV hysteresis for improved noise immunity
  • Data rates from 128 kbps to 460 kbps
  • Specified for +125°C operation
  • 1/8 unit load allows up to 256 devices on the Bus
  • -7 V to +12 V common mode input output voltage range (VCC ≥ 3 V)
  • Half and full duplex pinouts; three state Rx and Tx outputs
  • 5 V tolerant logic inputs
  • Tiny MSOP packages consume 50% less board space
  • Differential sensor interfaces
  • Process control networks
  • Security camera networks
  • Building environmental control and lighting systems

Digi-Key P/N Manufacturer P/N Packaging Description
ISL32600EFBZ-T7ACT-ND ISL32600EFBZ-T7A Cut Tape (CT) IC TXRX RS485/RS422 14SOIC Datasheet
ISL32600EFBZ-T7ATR-ND Tape & Reel (TR)
ISL32600EFBZ-T7ADKR-ND Digi-Reel®