AVX Corporation Distributor

MLO™ RF-DC SMT Crossover

AVX's MLO™ SMT RF-DC Crossover has a very low profile that intersects an RF and DC circuit trace in an SMT package

AVX Corporation's crossovers are miniature, low-profile devices that allow designers to avoid the use of PCB vias or coaxial jumper cables when DC supply voltage lines must cross one another or cross over RF signal lines. They are manufactured using MLO technology, which matches the CTE of PCB material and provides low loss across a wide RF spectrum. The MLO™ SMT RF-DC Crossover is a very-low-profile crossover that intersects an RF and DC circuit trace in an SMT package. The RF-DC Crossover is a low-cost solution for applications where a critical RF circuit trace intersects a DC circuit. This precludes the need for an expensive multilayer printed circuit board. The SMT package can support frequencies up to 6 GHz.
AVX Corporation's MLO™ RF-DC SMT Crossover

Features Applications
  • High isolation
  • RF-RF Crossover (X2B)
  • RF-DC Crossover (X2A)
  • Temp range of −55°C to 85°C
  • Frequency range of 2.5 GHz to 6.0 GHz
  • Radar
  • Satellites
  • Transceivers
  • RF power amplifiers

Digi-Key P/N Manufacturer P/N Description  
478-7860-2-ND X2A2020RFDCT MLO RF-DC CROSSOVER SMD Datasheet
478-7861-2-ND X2B2020RFRFT MLO RF-RF CROSSOVER SMD Datasheet
Available in Tape & Reel (-2-ND), Cut Tape (-1-ND), and custom Digi-Reel® (-6-ND)