ADI New Product Express

Analog Devices and Digi-Key present New Product Express - a fast, easy way to get ADI's newest products. These products are in full production, having passed ADI's quality and reliability testing, and are available from Digi-Key to order today!

If you would like to receive regular new product updates from Analog Devices, please visit the eNewsletter subscription center.

Volume 1 | Volume 2 | Volume 3 | Volume 4 | Volume 5 | Volume 6

Archive

AD511X Family of ±8% Resistor Tolerance, Non-Volatile Digital Potentiometers:

Model Resistance(kΩ) Position Interface
AD5110 10, 80 128 12C
AD5111 10, 80 128 Up/Down
AD5112 5, 10, 80 64 12C
AD5113 5, 10, 80 64 Up/Down
AD5116 5, 10, 80 64 Push-Button
AD5114 10, 80 32 12C
AD5115 10, 80 32 Up/Down

Key Features

AD511X
  • Single channel, 128-/64-/32-tap digital potentiometers
  • 5k ohm, 10k ohm, 80k ohm nominal resistance options
  • I2C, Up/Down and Push-Button interfaces
  • Maximum ±8% nominal resistance tolerance
  • 5 ppm/°C Temperature Coefficient (potentiometer mode)
  • Low power: Idd = 750nA typical
  • -40°C to +125°C operating temperature range

Applications

  • Mechanical potentiometer replacement
  • Portable electronics level adjustment
  • Audio volume control
  • Low resolution DAC
  • LCD panel brightness and contrast control
AD5110 Buy Now Datasheet
AD5111 Buy Now Datasheet
AD5112 Buy Now Datasheet
AD5113 Buy Now Datasheet
AD5114 Buy Now Datasheet
AD5115 Buy Now Datasheet
AD5116 Buy Now Datasheet

AD9633 (80/105/125 MSPS) and AD9637 (40/80 MSPS): Quad, 12-Bit, Serial LVDS 1.8 V A/D Converters

AD9633 / AD9637

AD9633 Key Features

  • 1.8 V supply operation
  • Low power: 100 mW per channel at 125 MSPS with scalable power options
  • SNR = 71 dB (to Nyquist); SFDR = 91 dBc (to Nyquist)
  • DNL = ±0.3 LSB (typical); INL = ±0.5 LSB (typical)
  • Serial LVDS (ANSI-644, default) and low power, reduced signal option (similar to IEEE 1596.3)

AD9637 Key Features

  • Low power: 60 mW per channel at 80 MSPS with scalable power options
  • SNR = 71.5 dBFS (to Nyquist); SFDR = 92 dBc (to Nyquist)
  • DNL = ±0.4 LSB (typical); INL = ±0.5 LSB (typical)
  • Serial LVDS (ANSI-644, default)
  • Low power, reduced signal option (similar to IEEE 1596.3)
  • Data and frame clock outputs

Applications

  • Medical imaging and nondestructive ultrasound
  • Portable ultrasound and digital beam-forming systems
  • Quadrature radio receivers
  • Diversity radio receivers
  • Optical networking
AD9633 Buy Now Datasheet
AD9637 Buy Now Datasheet

AD6657A: 11-bit, 200 MSPS, Quad IF Receiver

AD6657a

Key Features

  • 11-bit, 200 MSPS output data rate per channel
  • Integrated noise shaping requantizer
  • Performance with NSR enabled
    • SNR: 75.5 dBFS in 40 MHz band to 70 MHz at 185 MSPS
    • SNR: 73.7 dBFS in 60 MHz band to 70 MHz at 185 MSPS
    • SNR: 70.0 dBFS in 65 MHz band to 70 MHz at 185 MSPS
  • Performance with NSR disabled
    • SNR: 66.5 dBFS to 70 MHz at 185 MSPS
    • SFDR: 89 dBc to 70 MHz at 185 MSPS
  • Low power: 1.2 W at 185 MSPS

Applications

  • Communications
  • Diversity radio and smart antenna (MIMO) systems
  • Multimode digital receivers (35):  WCDMA, LTE, CDMA2000, WiMAX, TD-SCDMA
  • I/Q demodulation systems
AD6657A Buy Now Datasheet

AD8428: Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

AD8428

Key Features

  • Fixed gain of 2000
  • Access to internal nodes provides flexibility
  • Low noise: 1.5 nV/√Hz input voltage noise
  • High accuracy dc performance
    • Gain drift: 10 ppm/°C
    • Offset drift: 1 μV/°C
    • Gain accuracy: 0.2%
    • CMRR: 130 dB min
  • Bandwidth: 3.5 MHz
  • Slew rate: 40 V/μs
  • Power supply range:  ±4 V to ±18 V

Applications

  • Sensor interface
  • Medical instrumentation
  • Patient monitoring
AD8428 Buy Now Datasheet

ADA4940-2 (dual): Ultralow Power, Low Distortion ADC Drivers

ADA4940-2

Key Features

  • Small signal bandwidth: 260 MHz
  • Extremely low harmonic distortion
    • 122 dB THD at 50 kHz
    • 96 dB THD at 1 MHz
  • Low input voltage noise:  3.9 nV/√Hz
  • Very low power consumption: 6.25 mW (5 V supply)
  • 0.35 mV maximum offset voltage
  • Externally adjustable gain
  • Differential-to-differential or single-to-differential operation

Applications

  • Low power SAR ADC driver
  • Single-ended-to-differential  conversion
  • Differential buffers
  • Line drivers
  • Industrial process controls
ADA4940-2 Buy Now Datasheet

ADA4638-1: 30V Auto-Zero, Rail-to-Rail Output Precision Amplifier

ADA4638-1

Key Features

  • Single Supply Operation:  4.5 V to 30V
  • Dual supply operation:  ±2.5 V to ±15 V
  • Low offset voltage:  4 μV maximum
  • Input offset voltage drift: 0.05 μV/°C maximum
  • High gain: 130 dB minimum
  • High PSRR: 120 dB minimum
  • High CMRR: 130 dB minimum

Applications

  • Electronic weigh scale
  • Pressure and position sensors
  • Strain gage amplifiers
  • Medical instrumentation
  • Thermocouple amplifiers
ADA4638-1 Buy Now Datasheet

ADA4084-2: 30V Precision, RRIO Low Power Dual Op Amp

ADA4084-2

Key Features

  • Rail-to-rail input/output
  • Low power: 625 μA typical
  • Gain bandwidth product:  15.9 MHz at AV =100 typical
  • Unity-gain crossover:  9.9 MHz typical
  • −3 dB closed-loop bandwidth: 13.9 MHz typical at ±15 V
  • Low offset voltage:  100 μV maximum (SOIC)
  • Unity-gain stable

Applications

  • Battery-powered instrumentation
  • Power supply control and protection
  • Telecommunications
  • DAC output amplifier
  • ADC input buffer
ADA4084-2 Buy Now Datasheet

AD9557 (dual input) and AD9558 (quad input): Dual-Input Multiservice Line Card Adaptive Clock Translators

AD9557/AD9558

Key Features

  • Supports GR-1244 Stratum 3 stability in holdover mode
  • Provides smooth reference switchover with virtually no disturbance on output phase.
  • Supports Telcordia GR-253 jitter generation, transfer, and tolerance for SONET/SDH up to OC-192 Systems.
  • Supports ITU-T G.8262 Synchronous Ethernet slave clocks.
  • Supports ITU-T G.823, G.824, G.825, and G.8261.

Applications

  • Network synchronization, including synchronous Ethernet and SDH to OTN mapping/demapping
  • Cleanup of reference clock jitter
  • SONET/SDH clocks up to OC-192, including FEC
  • Stratum 3 holdover, jitter cleanup, and phase transient control
  • Wireless base station controllers
AD9557 Buy Now Datasheet
AD9558 Buy Now Datasheet

AD9577: Clock Generator with Dual PLLs, Spread Spectrum, and Margining

AD9577

Key Features

  • Fully integrated dual PLL/VCO cores
  • 1 integer-N and 1 fractional-N PLL
  • Continuous frequency coverage from 11.2 MHz to 200 MHz
    • Most frequencies from 200 MHz to 637.5 MHz available
  • PLL1 phase jitter (12 kHz to 20 MHz): 460 fs rms typical
  • PLL2 phase jitter (12 kHz to 20 MHz)
    • Integer-N mode: 470 fs rms typical
    • Fractional-N mode: 660 fs rms typical
  • Input crystal or reference clock frequency

Applications

  • Low jitter, low phase noise multioutpute clock generator for data communications applications including Ethernet, Fibre Channel, SONET, SDH, PCI-e, SATA, PTN, OTN, ADC/DAC, and digial video
  • Spread spectrum clocking
AD9577 Buy Now Datasheet

ADL5565: 6 GHz Differential Amplifier

ADL5565

Key Features

  • 3 dB bandwidth of 6 GHz (AV = 6 dB)
  • Pin strappable gain adjust: 6 dB, 12 dB, and 15.5 dB
  • Gain range from 0 dB to 15.5 dB using two external resistors
  • Differential or single-ended input to differential output
  • Low noise input stage: NF = 8.7 dB at 15.5 dB gain
  • IMD3 of −113 dBc at 100 MHz center
  • Slew rate: 11 V/ns
  • Fast settling and overdrive recovery of 2 ns

Applications

  • Differential ADC drivers
  • Single-ended-to-differential conversion
  • RF/IF gain blocks
  • Saw filter interfacing
ADL5565 Buy Now Datasheet

ADF4150: Fractional-N / Integer-N PLL Synthesizer

ADF4150

Key Features

  • Fractional-N synthesizer and integer-N synthesizer
  • Programmable divide-by-1/-2/-4/-8/-16 output
  • 5.0 GHz RF bandwidth
  • 3.0 V to 3.6 V power supply
  • 1.8 V logic compatibility
  • Separate charge pump supply (VP) allows extended tuning voltage in 3 V systems

Applications

  • Wireless infrastructure
  • Microwave point-to-point/point-to-point multipoint radios
  • VSAT radios
  • Test equipment
ADF4150 Buy Now Datasheet

ADXRS646: High Stability, Low Noise Vibration Rejecting Yaw Rate Gyro

ADXRS646

Key Features

  • Complete rate gyroscope on a single chip
  • Z-axis (yaw rate) response
  • 8°/hour bias stability
  • 0.01°/√second angle random walk
  • High vibration rejection over wide frequency
  • Measurement range extendable to a maximum of ±450°/s
  • 10,000 g powered shock survivability

Applications

  • Industrial application
  • Severe mechanical environments
  • Platform stabilization
ADXRS646 Buy Now Datasheet

ADM2682E (16Mbps) and ADM2687E (500 kbps): 5 kV rms, Signal & Power Isolated RS-485 Transceivers with ±15 kV ESD Protection

ADM2682E/ADM2687E

Key Features

  • 5 kV rms isolated RS-485/RS-422 transceiver, configurable as half or full duplex
  • isoPower® integrated isolated dc-to-dc converter
  • ±15 kV ESD protection on
  • RS-485 input/output pins
  • Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E)
  • Data rate: 16 Mbps (ADM2682E0 and 500 kbps (ADM2687E)
  • 5 V or 3.3 V operation
  • Connect up to 256 nodes on one bus

Applications

  • Isolated RS-485/RS-422 interfaces
  • Industrial field networks
  • Multipoint data transmission systems
ADM2682E Buy Now Datasheet
ADM2687E Buy Now Datasheet

ADM3054: 5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

ADM3054

Key Features

  • 5 kV rms signal isolated CAN transceiver
  • 5 V or 3.3 V operation on VDD1
  • 5 V operation on VDD2
  • VDD2SENSE to detect loss of power on VDD2
  • Complies with ISO 11898 standard
  • High speed data rates of up to 1 Mbps
  • Short-circuit protection on CANH and CANL against shorts to power/ground in 24 V systems
  • Unpowered nodes do not disturb the bus

Applications

  • CAN data buses
  • Industrial field networks
ADM3054 Buy Now Datasheet

ADM3051: High Speed Industrial CAN Transceiver with Bus Protection for 24 V Systems

ADM3051

Key Features

  • Physical layer CAN transceiver
  • 5 V operation on VCC
  • Complies with ISO 11898 standard
  • High speed data rates up to
  • 1 Mbps
  • Short-circuit protection on CANH and CANL against shorts to power/ground in 24 V systems
  • Unpowered nodes do not disturb the bus
  • Connect 110 or more nodes on the bus

Applications

  • CAN data buses
  • Industrial field networks
  • DeviceNet applications
  • CanOpen, CanKingdom
ADM3051 Buy Now Datasheet

ADP5023 and ADP5037: Dual 3 MHz, 800 mA Buck Regulators with 300 mA LDO’s on-board (ADP5023 has one LDO and ADP5037 has two)

ADP5023/ADP5037

Key Features

  • Main input voltage range:  2.3 V to 5.5 V
  • Two 800 mA buck regulators
  • One 300 mA LDO for ADP5023; two 300 mA LDOs for ADP5037
  • 24-lead, 4 mm × 4 mm LFCSP package
  • Regulator accuracy: ±3%
  • Factory programmable or external adjustable VOUTx
  • 3 MHz buck operation with forced PWM and auto PWM/PSM modes
  • BUCK1/BUCK2: output voltage range from 0.8 V to 3.8 V

Applications

  • Power for processors: ASICs, FPGAs and RF chipsets
  • Portable instrumentation and medical devices
  • Space constrained devices
ADP5023 Buy Now Datasheet
ADP5037 Buy Now Datasheet

ADP5034: Dual 3 MHz, 1200 mA Buck Regulator with two 300 mA LDOs on-board

ADP5034

Key Features

  • Main input voltage range: 2.3 V to 5.5 V
  • Two 1200 mA buck regulators
  • One 300 mA LDO for ADP5024; two 300 mA LDOs for ADP5034
  • 24-lead, 4 mm × 4 mm LFCSP package
  • Regulator accuracy: ±3%
  • Factory programmable or external adjustable VOUTx
  • 3 MHz buck operation with forced PWM and automatic PWM/PSM modes
  • BUCK1/BUCK2: output voltage range from 0.8 V to 3.8 V

Applications

  • Power for processors: ASICs, FPGAs and RF chipsets
  • Portable instrumentation and medical devices
  • Space constrained devices
ADP5034 Buy Now Datasheet

ADP223: Dual, 300 mA, Low Noise, High PSRR Voltage Regulator with adjustable output

ADP223

Key Features

  • Input voltage range: 2.5 V to 5.5 V
  • Small, 8-lead, 2 mm x 2 mm LFCSP package
  • Initial accuracy: ±1%
  • High PSRR: 70 dB at 10 kHz, 60 dB at 100 kHz, 40 dB at 1 MHz
  • Low noise: 27 μV rms at VOUT = 1.2 V, 50 μV rms at VOUT = 2.8 V
  • Excellent transient response
  • Low dropout voltage: 170 mV at 300 mA load
  • Adjustable output voltage range from 0.5V to 5.0 V

Applications

  • Portable and battery power equipment
  • Portable medical devices
  • Post dc-to-dc regulation
  • Point of sale terminals
  • Credit card readers
ADP223 Buy Now Datasheet

ADP224 and ADP225: Dual, 300 mA , QOD, Low Noise, High PSRR Voltage Regulators ADP224 has fixed output;  ADP225 has adjustable output)

Key Features

  • Input voltage range: 2.5 V to 5.5 V
  • Small, 8-lead, 2 mm x 2 mm LFCSP package
  • Initial accuracy: ±1%
  • High PSRR: 70 dB at 10 kHz, 60 dB at 100 kHz, 40 dB at 1 MHz
  • Low noise: 27 μV rms at VOUT = 1.2 V, 50 μV rms at VOUT = 2.8 V
  • Excellent transient response
  • Low dropout voltage: 170 mV at 300 mA load
  • Quick output discharge (QOD)
  • Fixed output voltage range from 0.8V to 3.3V: ADP224
  • Adjustable output voltage range from 0.5V to 5.0 V: ADP225

Applications

  • Portable and battery power equipment
  • Portable medical devices
  • Post dc-to-dc regulation
  • Point of sale terminals
  • Credit card readers
ADP224 Buy Now Datasheet
ADP225 Buy Now Datasheet

Associated Products

ADP150/ADP151 CMOS Linear Regulators

ADIS16210 iSensor