OPA316 CMOS Operational Amplifier


TI's 10 MHz, low-power, low-noise, RRIO, 1.8 V CMOS op amp

Texas Instruments' OPA316 family of single-, dual- and quad-operational amplifiers represents a new generation of general purpose, low-power operational amplifiers. Featuring rail-to-rail input and output swings, low quiescent current (400 µA/ch typ) combined with a wide bandwidth of 10 MHz and very-low noise (11 nV/√Hz at 1 kHz) make this family very attractive for a variety of applications that require a good balance between cost and performance. The low input bias current supports those operational amplifiers to be used in applications with MΩ source impedances.

The robust design of the OPA316 device provides ease-of-use to the circuit designer – unity-gain stable, integrated RFI/EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4 kV HBM).

Features
  • Unity-gain bandwidth: 10 MHz
  • Low IQ: 400 µA/ch
  • Wide supply range: 1.8 to 5.5 V
  • Low noise: 11 nV/√Hz at 1kHz
  • Low input bias current: ±5 pA
 
  • Offset voltage: ±0.5 mV
  • Unity-gain stable
  • Internal RFI/EMI filter
  • Shutdown version: OPA2316S
  • Extended temperature range: -40°C to +125°C

OPA316 CMOS Operational Amplifier

Manufacturer Part Number Description Available Quantity Datasheets
OPA316IDCKT IC OPAMP GP 10MHZ RRO SC-70 299