Energy Harvesting Solutions

Energy Harvesting devices can derive energy from a variety of sources including solar, vibration, and temperature variation. By utilizing these natural energy sources, designers can create applications that are maintenance-free and allow for new forms of implementation. With the broadest selection of energy harvesting devices and components in the industry, Digi-Key offers solutions and the most flexible options for your Energy Harvesting design.

Product Highlights | View All (23)

Capacitors designed for use in applications which demand low impedance, high ripple, miniaturization, and ultra long life properties.
Publish Date: 2012-09-07
Allowing very slim on-wall mountable rocker switches or remote controls, PTM 200 can be integrated in units for implementation of application-specific solutions.
Publish Date: 2013-07-02
The EPCOS X1 capacitors have been designed for an extended operating voltage of up to 530 V AC.
Publish Date: 2015-04-27
Eaton's high capacitance 5.0V PowerStor supercapacitor packs expand the portfolio of power management products.
Publish Date: 2012-06-29

Product Training Modules | View All (12)

The demise of lead finished ICs and Maxim’s two relevant solutions, based on low or high volume, which offer SnPb finishes.
Publish Date: 2012-02-27
Vibration energy harvesting is cost effective as there are low ownership costs and it may replace traditional battery power. See Volture products from Mide'.
Publish Date: 2011-03-30
Contains an integrated full speed USB module and offers up to 24 MHz bus frequency and up to 60 K of flash; JM60 is NXP's highest performing 8-bit USB MCU.
Publish Date: 2011-09-20
Electrical and physical characteristics of wire insulation and jackets which effect cable performance and should be considered when choosing cable.
Publish Date: 2011-04-28

Videos | View All (38)

Overview of the Cymbet EVAL-09 EnerChip EP Universal Energy Harvesting evaluation kit.
Joe Keating, Sr. Director of Applications Engineering with Infinite Power Solutions (IPS) demonstrates the ADP-201: THINERGY Application Development Platform.
The Solar Car team discusses the next process in designing and assembling the solar car Quantum. They show us the process of using carbon fiber for the car.
Lorandt explains how to utilize Wurth Electronics Energy Harvesting Solution to Go Kit
Analog Devices ADP5091/ADP5092 for Smart Energy Harvesting
English  |  Español