HIGH SPEED PLUGGABLE I/O SOLUTIONS

 

Pluggable I/O interfaces offer significant advantages as a high-speed I/O interconnect. Along with a standard equipment I/O interface and the flexibility of pluggable modules, TE Connectivity’s (TE) high-speed pluggable I/O products include options for fiber and copper links, as well as various data rates and protocols.

TE has always been a leader in the development of pluggable I/O standards. TE continues to be engaged in new pluggable interface standards to support the rapidly changing market needs for higher bandwidth, and remains an industry leader with the technical expertise required to deliver superior designs for signal integrity and EMI at higher data rates.

Jump to:
MICRO SFP+ | zSFP+ | zQSFP+ | QSFP | SFP | SFP+ | XFP | CFP | CXP

MICRO SFP+ CONNECTOR & CABLE ASSEMBLY – NEW!Micro SFP+ Connector & Cable Assembly Product Page

TE Micro SFP+ connector and cable assembly

TE micro SFP+ connector and cable assembly empower you to dream big when designing your communication system through a footprint that’s up to 50% smaller than current SFP+ interconnects. The micro SFP+ interconnects allow you to increase faceplate density while freeing up additional PCB space due to the board connector’s shortened length. The products’ designs have also been enhanced to improve signal routing, minimize EMI and optimize automated manufacturing processes.

Applications:

  • Telecommunications: cellular infrastructure, hubs servers and switches
  • Data communication: servers and storage equipment
  • Medical diagnostic equipment
  • Networking: network interface, storage, power supplies and test and measurement equipment
Part Number Description  
2246041-1 CONN SFP+ RCPT W/CAGE 2246041-1 Product Page
2246040-1 CONN SFP+ RCPT W/CAGE 2246040-1 Product Page
2142969-1 ETHERNET CABLE SFP+ 2142969-1 Product Page
2142969-4 ETHERNET CABLE SFP+ 2142969-4 Product Page
2142969-7 ETHERNET CABLE SFP+ 2142969-7 Product Page
back to top

zSFP+ InterconnectzSFP+ Interconnect Product Page

zSFP+ Interconnec

TE's zQSFP+ interconnects offer an increased data rate of 28 Gbps in an industry standard, scalable design that allows for backwards compatibility with QSFP/QSFP+ cables and transceivers, providing a simple upgrade path from 10 Gbps to 28 Gbps. The complete portfolio of interconnects deliver a large range of simple and customizable design options to meet most customer requirements.

Key Features:

Increased Data Rates

  • 2.5 times more throughput than traditional QSFP solutions
  • Data transfer rates of 28 Gbps
  • Supports 100 Gbps Ethernet (28 Gbps x 4), and 100 Gbps InfiniBand (IB) Enhanced Data Rate (EDR) requirements

Industry Standard and Customizable Design

  • Industry standard interface
  • Backwards compatible with QSFP/QSFP+ cables and transceivers
  • Higher loss budget for optics and copper cables at 10 Gbps

Comprehensive Portfolio and Inventory

  • Dual sourced product available through Molex, LLC.
  • Features behind and through bezel cages with various lightpipe and heat sink options
  • Well-stocked distribution channel

Improved EMI Performance

  • Increased data rates make EMI protection more challenging
  • Provide excellent EMI protection through 28 Gbps

Applications:

  • Network Interface
  • Switches
  • Servers
  • Routers
  • Wireless Base Stations
  • Test and Measurement Equipment
Part Number Description  
2170088-1 CONN ZSFP+ 20CKT 30U 2170088-1 Product Page
2198318-2 ZSFP+ STACKED 2X1 W/4 LP GASKET 2198318-2 Product Page
2198318-6 ZSFP+ STACKED 2X1 W/4 LP SPRING 2198318-6 Product Page
2180324-2 ZSFP+ STACKED 2X4 W/4 LP GASKET 2180324-2 Product Page
2180324-6 ZSFP+ STACKED 2X4 W/4 LP SPRING 2180324-6 Product Page
2198339-2 ZSFP+ STACKED 2X6 W/4 LP GASKET 2198339-2 Product Page
2198339-6 ZSFP+ STACKED 2X6 W/4 LP SPRING 2198339-6 Product Page
back to top

z-Quad Small Form-factor Pluggable Plus (zQSFP+) Interconnect System z-Quad Small Form-factor Pluggable Plus Product Page

z-Quad Small Form-factor Pluggable Plus

TE’s zQSFP+ (z-Quad Small Form-factor Pluggable Plus) connector and cage assembly has been designed for applications in the telecommunications, data center and networking markets that require a high-speed, high-density connector. The interconnect offers four channels of high-speed differential signals with data rates ranging from 25 Gbps up to potentially 40 Gbps, and will support 100 Gbps (4 x 25 Gbps) Ethernet and 100 Gbps 4X InfiniBand Enhanced Data Rate (EDR) requirements.

Key Features:

  • Backwards-compatible with QSFP optical modules and cable assemblies
  • Enhanced EMI cage helps provide excellent thermal performance/EMI protection
  • 1 x 1 through 1 x 6 ganged cages
  • Stacked 2 x 1 through 2x3 cages with thermally enhancements available
  • Coupled, narrow-edged, blanked- and formed-contact geometry/insert molding
  • Staggered press-fit pins for belly-to-belly applications
  • High-temperature, thermoplastic housing

Applications:

  • Telecommunications: Servers, switches, access routers and switches, and cellular infrastructure
  • Data Center: Servers and storage
  • Medical: Diagnostic equipment
  • Networking: Network interface, routers, switches and storage
  • Test and measurement equipment
Part Number Description  
1551920-2 CONN RECPT ZQSFP+ SMD R/A 38POS 1551920-2 Product Page
2170752-2 CAGE ASSEMBLY, QSFP28 1X1, GASKE 2170752-2 Product Page
2170705-7 CAGE ASSY, QSFP28 1X1, SPRING, H 2170705-7 Product Page
2227103-2 1X2 CAGE ASSY BHND BZL ZQSFP+ 2227103-2 Product Page
2227249-2 1X4 CAGE ASSY BHND BZL ZQSFP+ 2227249-2 Product Page
2170785-6 CAGE ASSY 1X4 QSFP28 2170785-6 Product Page
2170747-6 CAGE ASSY 1X4 QSFP29 2170747-6 Product Page
2170708-1 CAGE ASSY, 1X6, QSFP28, SPRING, 2170708-1 Product Page
2227224-3 ZQSFP+ STACKED RECEPTACLE ASSEMB 2227224-3 Product Page
2227669-3 ZQSFP+ STACKED RECEPTACLE ASSEMB 2227669-3 Product Page
2227225-2 ZQSFP+ STACKED RECEPTACLE ASSEMB 2227225-2 Product Page
2227670-2 ZQSFP+ STACKED RECEPTACLE ASSEMB 2227670-2 Product Page
2227226-3 ZQSFP+ STACKED RECEPTACLE ASSEMB 2227226-3 Product Page
2227671-3 ZQSFP+ STACKED RECEPTACLE ASSEMB 2227671-3 Product Page
1551891-1 zQSFP+ 1x1 CAGE ASSEMBLY BEHIND-BEZEL 1551891-1 Product Page
2173238-1 zQSFP+ 1x3 CAGE ASSEMBLY BEHIND-BEZEL 2173238-1 Product Page
1551892-1 zQSFP+ 1x1 CAGE ASSEMBLY BEHIND-BEZEL WITH HEAT SINK 1551892-1 Product Page
2173239-1 zQSFP+ 1x3 CAGE ASSEMBLY BEHIND-BEZEL WITH HEAT SINK 2173239-1 Product Page
back to top

QSFP (Quad Small Form-factor Pluggable)QSFP (Quad Small Form-factor Pluggable) Product Page

QSFP (Quad Small Form-factor Pluggable)

QSFP (or quad SFP) connectors provide four channels of data in one pluggable interface. Each channel is capable of transferring data up to 14 Gbps, supporting a total of 56 Gbps. These interconnects have 3x the density of SFP+ interconnects. The QSFP product family includes cages in single and ganged configurations with various heat sink and lightpipe options. The connector is a 38-position, high-speed SMT connector. EMI plugs are offered for empty ports

Key Features:

  • 4-channels in one interface, providing 3 to 4x density of, SFP+ and XFP
  • Meets QSFP+ 10 Gbps Ethernet and 14 Gbps InfiniBand requirements (total 40- and 56-Gbps interface)
  • Uses 38-position SMT connector
  • Cages offered in single port and ganged configurations
  • 2x1 and 2x2 stacked assemblies also available
  • Cages accommodate belly-to-belly mounting
  • Heat sinks and lightpipes available

Applications:

  • Storage
  • Servers
  • Networking
  • Switches, routers and hubs
  • Network Interface Cards (NICs)
  • Telecommunication equipment
Part Number Description  
2110819-1 QSFP+ ENH EVERCLEAR PT CONN 2110819-1 Product Page
1888617-1 CONN CAGE THRU-BEZEL QSFP 1888617-1 Product Page
1888781-1 CONN CAGE BEHIND-BEZEL QSFP 1888781-1 Product Page
1888631-1 CONN CAGE+ PCI HSINK THRU QSFP 1888631-1 Product Page
1888631-2 CONN CAGE+ SAN HSINK THRU QSFP 1888631-2 Product Page
1888968-1 CONN CAGE+ PCI HSINK BEHIND QSFP 1888968-1 Product Page
1888968-2 CONN CAGE+ SAN HSINK BEHIND QSFP 1888968-2 Product Page
1888810-2 DUST CAP FOR XFP AND QSFP 1888810-2 Product Page
back to top

Small Form-factor Pluggable (SFP)Small Form-factor Pluggable (SFP) Product Page

Small Form-factor Pluggable (SFP)

TE’s family of SFP+ interconnects is designed to transfer data at speeds of up to 16 Gb/s. The portfolio features 20-position SMT connectors as well as cages in multiple configurations, and with elastomeric gasket or enhanced EMI springs to address EMI containment at higher data rates. The SFP+ interconnect family also includes thermal- and EMI-enhanced stacked configurations to further improve performance.

Key Features:

  • Supports applications up to 16 Gb/s
  • Offers cages in single-port, ganaged and stacked configurations. Belly-to-belly mounting cages also offered
  • Uses enhanced 20-position connector that is backward-compatible with SFP connectors
  • Features elastomeric gaskets and springs for EMI containment
  • Offers heat sink and light pipe options

Applications:

  • Storage, servers, routers, switches and hubs
  • Network Interface Cards (NICs)
  • Other telecommunications equipment
Part Number Description  
6367035-1 CONN SFP UPPER CAGE PCB 6367035-1 Product Page
1367629-1 CONN SFP CAGE SINGLE PF W/PIPE 1367629-1 Product Page
1761007-1 CONN SFP CAGE 1X2 W/LIGHT PIPE 1761007-1 Product Page
1761008-1 CONN SFP CAGE 1X4 W/LIGHT PIPE 1761008-1 Product Page
1658939-1 CONN SFP CAGE 1X6 W/LIGHT PIPE 1658939-1 Product Page
1367073-1 CONN PT USE W/SFP CAGES 15AU 1367073-1 Product Page
1367073-2 CONN PT USE W/SFP CAGES 30AU 1367073-2 Product Page
6367034-1 CONN SFP LOWER CAGE PCB 6367034-1 Product Page
1367147-1 DUST COVER SFP 1367147-1 Product Page
back to top

SFP+ (Small Form-factor Pluggable)SFP+ (Small Form-factor Pluggable) Product Page

SFP+ (Small Form-factor Pluggable)

The TE SFP+ product family extends the use of the Small Form-factor Pluggable (SFP) interconnect up to 10 Gbps. This system meets the performance requirements of SFF (Small Form-factor) specification SFF-8431 and supports 8 G Fiber Channel, 10G Ethernet, InfiniBand™ standard and Fibre Channel over Ethernet (FCoE) applications. The SFP+ product family includes cable assemblies, cages and connectors.

The TE SFP+ direct-attach copper cable assemblies provide a cost-effective solution over fiber optics in short reach applications. The design allows for serial data transmission up to 10 Gbps in each direction. The mechanical design of the cable braid crimp and EMI skirt suppress EMI radiation. Low power consumption helps make the SFP+ copper cable assembly an economical solution for within rack or rack-to-rack applications. Both passive and active copper cable assemblies are available.

The passive cable assembly design has no signal amplification in the cable assembly. Electronic Dispersion Compensation (EDC) is typically used on host board designs when passive SFP+ copper assemblies are utilized. EDC allows for an extended length of passive cable assemblies. The industry-standard EEPROM signature enables the host system to differentiate between a passive copper cable and a fiber optic module.

The active cable assembly design has signal amplification and equalization in the assembly. Active copper assemblies are typically used in host systems that do not employ EDC. Active SFP+ cable assemblies also incorporate Rx LOS and Tx Disable features. As with passive cables, the industry-standard EEPROM signature enables the host system to differentiate between an active copper cable and a fiber optic module.

Key Features:

  • MSA SFF-8431
  • Supports serial data rates up to 10 Gbps
  • Low-cost alternative to fiber optic assemblies
  • Low power consumption
  • Enhanced EMI suppression
  • 24 AWG through 30 AWG cable available
  • Pull-to-release retractable pin latch design

Applications:

  • Switches
  • Networking: servers, routers and hubs
  • Enterprise storage
  • Telecommunications equipment
  • Network Interface Cards (NIC's)

EEPROM is a trademark of NEC Electronics Corporation.
InfiniBand™ is a trademark of INFINIBAND Trade Association.

Part Number Description  
2007637-5 CONN ASSY 4 PORTS 2007637-5 Product Page
2007562-6 CONN STACKED SFP+ 2X6 2007562-6 Product Page
2007464-1 CONN CAGE & HEAT SINK SGL PORT 2007464-1 Product Page
2007399-5 CONN ASSY 8 PORTS 2007399-5 Product Page
1888247-1 CONN PT USE W/SFP+ CAGE 30AU SMD 1888247-1 Product Page
1888247-2 CONN PT USE W/SFP+ CAGE 15AU SMD 1888247-2 Product Page
2007169-1 CONN SFP+ CAGE 1X6 W/LGHT GASKET 2007169-1 Product Page
2007170-1 CONN SFP+ CAGE 1X6 EMI GASKET 2007170-1 Product Page
2007193-1 CONN SFP+ CAGE SGL PCI SPRINGS 2007193-1 Product Page
2007093-1 CONN SFP+ CAGE 1X4 W/ LIGHTPIPES 2007093-1 Product Page
2007132-1 CONN SFP+ CAGE 1X4 SPRINGS 2007132-1 Product Page
2007135-1 CONN SFP+ CAGE 1X4 EMI GASKET 2007135-1 Product Page
2007178-1 CONN SFP+ CAGE 1X4 W/LIGHT SPRNG 2007178-1 Product Page
2007180-1 CONN SFP+ CAGE 1X2 W/ LIGHTPIPES 2007180-1 Product Page
2007181-1 CONN SFP+ CAGE 1X2 EMI GASKET 2007181-1 Product Page
2007198-1 CONN SFP+ CAGE SGL SPRINGS 2007198-1 Product Page
2007215-1 CONN SFP+ CAGE SGL PCI 1 DEG 2007215-1 Product Page
2007250-1 CONN SFP+ CAGE 1X6 W/LIGHT SPRNG 2007250-1 Product Page
2007251-1 CONN SFP+ CAGE 1X6 SPRINGS 2007251-1 Product Page
2007254-1 CONN SFP+ CAGE SGL W/LIGHT SPRNG 2007254-1 Product Page
2007262-1 CONN SFP+ CAGE 1X2 W/LIGHT SPRNG 2007262-1 Product Page
2007263-1 CONN SFP+ CAGE 1X2 SPRINGS 2007263-1 Product Page
2007194-1 CONN SFP+ CAGE SGL PCI SPRINGS 2007194-1 Product Page
back to top

XFP 10 Gigabit Serial Pluggable ProductsXFP 10 Gigabit Serial Pluggable Products Page

XFP 10 Gigabit Serial Pluggable Products

XFP is a cage/connector/module system that features gasketing for excellent EMI containment, a riding heatsink for thermal dissipation, an intuitive latching system, and a 30 position SMT connector based on the SFP connector design. TE also offers copper cable assemblies that plug directly into an XFP port for lower cost short-reach applications. This technology converts serial electrical signals to external serial optical or electrical signals and is intended to be flexible enough to support OC192/STM-64, 10x Fibre Channel, G.709, and 10 G Ethernet.

Key Features:

  • 10 Gb/s serial link
  • EMI containment features
  • Module to XFP Cage
  • XFP Cage to Chassis
  • Uses 30 pin surface mount connector
  • Patented riding heat sink for thermal management
  • Press-fit cage termination
  • Designed to support belly-to-belly applications

Applications:

  • Ethernet
  • Fibre channel
Part Number Description  
788862-1 CONN XFP 30POS 15GOLD SMD 788862-1 Product Page
1489951-1 CONN CAGE XFP PRESS-FIT 1489951-1 Product Page
788862-2 CONN XFP 30POS 30GOLD SMD 788862-2 Product Page
1367500-1 CONN XFP 30POS HI-SPEED 30AU SMD 1367500-1 Product Page
1888481-1 CONN XFP CAGE/HEAT SINK PRESSFIT 1888481-1 Product Page
1542706-2 HEAT SINK XFP NETWORK APPS 1542706-2 Product Page
1542618-2 HEAT SINK XFP SAN APPLICATIONS 1542618-2 Product Page
back to top

CFP Compliant Ethernet Connectors & ComponentsCFP Compliant Ethernet Connectors & Components Product Page

CFP Compliant Ethernet Connectors & Components

This interconnect system supports 40 Gb/s and 100 Gb/s, as required by the IEEE 802.3ba specification as well as other developing telecom protocols. The CFP connector features multiple channels, each supporting 10 Gb/s with electrical performance surpassing that of existing 10 Gb/s interfaces.

The connector interface is a two piece solution consisting of a plug connector which is integrated by optical transceiver suppliers, and a host board receptacle connector. The additional host board components include the receptacle cover, guide rails, external bracket assembly, backer plate and riding heat sink to provide a complete solution. The integrated system provides the mechanical, EMI and thermal performance necessary to support the demanding requirements of the CFP MSA Optical Transceivers and OEM host line cards.

Key Features:

  • 148-position interconnect
  • Supports 10 Gb/s per channel
  • Designed for belly-to-belly port positioning
  • Accepts all CFP MSA-compliant optical transceivers
  • Excellent EMI shielding
  • RoHS compliant

Applications:

  • Switches
  • Routers
  • Optical Transport equipment
  • Long Haul, Metro and MultiService Provisioning Platform
Part Number Description  
2057629-1 CONN CFP MODULE ASSY 100GIG 2057629-1 Product Page
2057630-1 CONN CFP RCPT HOST BOARD SMD 2057630-1 Product Page
2057592-2 CONN CFP GUIDE RAIL 2057592-2 Product Page
2057631-1 CONN CFP CONNECTOR COVER 2057631-1 Product Page
2057930-1 CONN CFP BACKER PLATE 100GIG 2057930-1 Product Page
2057626-1 CONN CFP EXTERNAL BRACKET ASSY 2057626-1 Product Page
1963856-1 HEATSINK CFP RIDING 1963856-1 Product Page
back to top

CXP Connector and Cage AssembliesCXP Product Page

CXP Connector and Cage Assemblies

TE's CXP connector and cage assembly offers twelve channels of 12.5 Gbps data rates for 150 Gbps of total bandwidth in a one-piece press-fit assembly. TE's CXP system complies with InfiniBand CXP 12x QDR and IEEE 100 Gbps Ethernet standards and enables pluggable copper or optical cable options. The system has been engineered for applications in high-speed data environments with EMI gasketing at bezel opening and EMI springs for plug-to receptacle containment. It provides one-step placement to the host board and comes with multiple heatsink, lightpipe and EMI/dust plug options. Enhanced EF, dual sourced footprint offers reduced cross-talk and improved electrical performance.

TE also offers a complement of fiber optic cable assemblies with CXP fiber paths to interconnect CXP transceivers to CXP, QSFP+ and SFP+ transceivers. All are available with OM2 and OM3 fiber as a standard offering, with OM4 being available upon request.

Key Features:

  • Standard CXP interface complies with InfiniBand CXP 12x QDR and IEEE 100 Gbps Ethernet
  • Provides 12 channels of 12.5 Gbps data rates for 150 Gbps of total bandwidth in a one-piece press-fit assembly
  • Dual-sourced, Enhanced Footprint (EF) offers reduced cross-talk
  • Pre-assembled (one-piece) connector and cage assembly offers one-step placement to the board
  • EMI gasketing at bezel opening and EMI springs for plug-to-receptacle containment
  • CXP cages accommodate belly-to-belly mounting (can be applied to both sides of the board)
  • Offering includes multiple heatsink, lightpipe and EMI/dust plug options to fit customer applications

Applications:

  • Controller Cards and servers
  • Network switches
  • Routers
  • Storage devices
  • Direct Attached Storage (DAS)
  • Storage Attached Networks (SAN)
  • Network Attached Storage (NAS)
Part Number Description  
2149448-1 CONN RCPT W/CAGE CXP 84POS 2149448-1 Product Page
2149152-1 CONN RCPT CXP 84POS R/A 2149152-1 Product Page
2149157-1 CONN RCPT CXP 84POS W/HEAT SINK 2149157-1 Product Page
2149157-3 CONN RCPT CXP 84POS W/HEAT SINK 2149157-3 Product Page
2149157-5 CONN RCPT CXP 84POS W/HEAT SINK 2149157-5 Product Page
2149159-1 CONN RCPT CXP 84POS W/LT PIPE 2149159-1 Product Page
2149159-3 CONN RCPT CXP 84POS W/LT PIPE 2149159-3 Product Page
2149159-5 CONN RCPT CXP 84POS W/LT PIPE 2149159-5 Product Page
2149159-7 CONN RCPT CXP 84POS W/LT PIPE 2149159-7 Product Page
2149699-1 CONN RCPT W/CAGE CXP 84POS R/A 2149699-1 Product Page
2149701-1 CONN RCPT W/CAGE CXP 84POS R/A 2149701-1 Product Page
2149731-1 CONN RCPT W/CAGE CXP 84POS R/A 2149731-1 Product Page
2149733-1 CONN RCPT W/CAGE CXP 84POS R/A 2149733-1 Product Page
back to top

TE Connectivity and TE connectivity (logo) are trademarks.

zSFP+ and zQSFP+ are part of the ZXP® family of connectors and use ZXP technology. ZXP is a trademark of Molex, LLC.

 
English  |  Español