LIGHT-N-LOK Connectors

LIGHT-N-LOK connectors for flourescent ballast lighting applications

Image of TE Connectivity's LIGHT-N-LOK ConnectorsA new connector for fluorescent ballast lighting applications provides a hot-pluggable disconnect to allow safe field servicing without exposing personnel to electrical shock hazards. Available in 2 or 3 position pre assembled mated connector sets or with factory installed flying leads. The connector accepts 18 AWG solid wire.

  • Available in 2 and 3 position sizes
  • Poke-in termination for 18 AWG solid wire for easy tool-less, field or factory installation
  • Integral strain relief prevents inadvertent wire twist out and pull out
  • Designed for hot plugging
  • Snag resistant rounded housings
  • Compact connector housings: 2 position assembly fits through a 5/8” diameter knock-out opening; 3 position assembly fits through a 7/8” diameter knock-out opening

  • Connector latches prevent unintentional disconnect of connector
  • Standard 3/8” wire strip length 
  • Can be supplied as pre-assembled mated connector sets with or without factory installed flying leads
  • Product is marked (English/French) in support of CSA luminaire labeling requirements


  • Commercial lighting applications for UL2459
  • Meets new NEC and CEC requirements

LIGHT-N-LOK Connectors

ImageManufacturer Part NumberDescriptionConnector TypeContact TypeAvailable Quantity
CONN MATED PAIR 2POS LIGHT-N-LOK2008144-1CONN MATED PAIR 2POS LIGHT-N-LOKPlug and ReceptacleFemale Socket; Male Pin10230 - Immediate
2008144-1 product page link
CONN MATED PAIR 3POS LIGHT-N-LOK2008152-1CONN MATED PAIR 3POS LIGHT-N-LOKPlug and ReceptacleFemale Socket; Male Pin2933 - Immediate
2008152-1 product page link
Published: 2008-05-15