Z+ Series Power Supplies

TDK-Lambda's 200 to 800 W programmable AC/DC power supplies

Image of TDK-Lambda Corporation's Z+ Series Power SuppliesTDK-Lambda’s Z+ high-density, 2 U format, bench-top and rack-mountable power supplies are designed to meet the demands of a wide variety of ATE, laboratory and OEM applications, including test and measurement, semiconductor burn-in, component test, LED/Laser test, RF amplifiers, electromagnetic and electrochemical.

The Z+ models can provide between 200 to 800 W of output power with output voltages from 0 to 650 VDC and output currents up to 72 A. The Z+ devices are 33% smaller and 40% lighter than the previous generation (ZUP series) and similar products, thus providing a 49% increase in power density. The standard models are only 3.27" high by 2.76" wide, so up to 6 units can be installed in the optional 19" rack housing and blanking plates are available for unused slots. Options for front panel output-jacks and multiple-unit housings are available for bench-top applications.

Features and Benefits  
  • 2 U high
  • Built-in USB, RS-232 and RS-485 interface
  • Optional LAN, GPIB and Isolated Analog programming
  • Bench or rack mount
  • Constant-current or voltage modes
  • Five-year warranty
  • Test and Measurement
    • Built-in Last-Setting memory based on flash memory; no battery or capacitor backup simplifies test design and requirements.
    • Built-in RS-232/RS-485 gives maximum system flexibility along with 0-5 V and 0-10 V selectable analog programming.
    • Wide range of available inputs allows testing of many different devices.
  • Semiconductor Burn-in
    • Safe-Start mode ENABLED to re-start at Output OFF to protect load.
    • Wide range input (85-265 VAC) with Active Power Factor correction rides through input transients easily.
  • Component Test
    • High power density, zero-stacking, and single-wire parallel operation give maximum system flexibility.
  • Laser Diode
    • OVP is directly set on Voltage Display, assuring accurate protection settings.
    • Fast constant current response with no over-shoot.
    • Current Limit FoldBack assures load is protected from current surges.
  • Heater Supplies
    • Smooth, reliable encoders enhance front panel control.
    • Remote analog programming is user selectable at 0-5 V or 0-10 V.
  • RF Amplifiers and Magnets
    • Robust design assures stable operation under a wide variety of loads, with high linearity in voltage and current modes.

Z+ Series

ImageManufacturer Part NumberDescriptionPart StatusTypeAccessory TypeAvailable Quantity
Z-BP datasheet linkBLANKING PANEL FOR ZNL100 70MMZ-BPBLANKING PANEL FOR ZNL100 70MMActivePower SupplyBlanking Panel91 - Immediate
Z-BP product page link
Z-NL100 datasheet linkHOUSING 19" RACKZ-NL100HOUSING 19" RACKActivePower SupplyHousing25 - Immediate
Z-NL100 product page link
Z20-20-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-20VZ20-20-UAC/DC PROGRAMMABLE SUPPLY 0-20VActiveBench (AC to DC)85 ~ 265VAC3 - Immediate
Z20-20-U product page link
Z60-14-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-60VZ60-14-UAC/DC PROGRAMMABLE SUPPLY 0-60VActiveBench (AC to DC)85 ~ 265VAC4 - Immediate
Z60-14-U product page link
Z20-10-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-20VZ20-10-UAC/DC PROGRAMMABLE SUPPLY 0-20VActiveBench (AC to DC)85 ~ 265VAC12 - Immediate
Z20-10-U product page link
Z100-4-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-100VZ100-4-UAC/DC PROGRAMMABLE SUPPLY 0-100VActiveBench (AC to DC)85 ~ 265VAC5 - Immediate
Z100-4-U product page link
Z100-8-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-100VZ100-8-UAC/DC PROGRAMMABLE SUPPLY 0-100VActiveBench (AC to DC)85 ~ 265VAC4 - Immediate
Z100-8-U product page link
Z20-40-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-20VZ20-40-UAC/DC PROGRAMMABLE SUPPLY 0-20VActiveBench (AC to DC)85 ~ 265VAC2 - Immediate
7 - Factory Stock
Z20-40-U product page link
Z650-1.25-U datasheet linkPWR SUPPLY OUTPUT 0-650V 0-1.25AZ650-1.25-UPWR SUPPLY OUTPUT 0-650V 0-1.25AActiveBench (AC to DC)85 ~ 265VAC5 - Immediate
Z650-1.25-U product page link
Z160-5-U datasheet linkPWR SUPPLY OUTPUT 0-160V 0-5AZ160-5-UPWR SUPPLY OUTPUT 0-160V 0-5AActiveBench (AC to DC)85 ~ 265VAC3 - Immediate
Z160-5-U product page link
Z-485-9 datasheet linkZ+ RS485 CABLE (9 PIN)Z-485-9Z+ RS485 CABLE (9 PIN)ActivePower SupplyCable9 - Immediate
14 - Factory Stock
Z-485-9 product page link
Z60-3.5-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-60VZ60-3.5-UAC/DC PROGRAMMABLE SUPPLY 0-60VActiveBench (AC to DC)85 ~ 265VAC4 - Immediate
Z60-3.5-U product page link
Z10-20-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-10VZ10-20-UAC/DC PROGRAMMABLE SUPPLY 0-10VActiveBench (AC to DC)85 ~ 265VAC3 - Immediate
Z10-20-U product page link
Z100-2-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-100VZ100-2-UAC/DC PROGRAMMABLE SUPPLY 0-100VActiveBench (AC to DC)85 ~ 265VAC2 - Immediate
Z100-2-U product page link
Z36-12-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-36VZ36-12-UAC/DC PROGRAMMABLE SUPPLY 0-36VActiveBench (AC to DC)85 ~ 265VAC5 - Immediate
Z36-12-U product page link
Z60-7-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-60VZ60-7-UAC/DC PROGRAMMABLE SUPPLY 0-60VActiveBench (AC to DC)85 ~ 265VAC3 - Immediate
Z60-7-U product page link
Z10-40-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-10VZ10-40-UAC/DC PROGRAMMABLE SUPPLY 0-10VActiveBench (AC to DC)85 ~ 265VAC2 - Immediate
Z10-40-U product page link
Z36-6-LAN-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-36VZ36-6-LAN-UAC/DC PROGRAMMABLE SUPPLY 0-36VActiveBench (AC to DC)85 ~ 265VAC2 - Immediate
6 - Factory Stock
Z36-6-LAN-U product page link
Z100-2-LAN-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-100VZ100-2-LAN-UAC/DC PROGRAMMABLE SUPPLY 0-100VActiveBench (AC to DC)85 ~ 265VAC2 - Immediate
Z100-2-LAN-U product page link
Z100-4-LAN-U datasheet linkAC/DC PROGRAMMABLE SUPPLY 0-100VZ100-4-LAN-UAC/DC PROGRAMMABLE SUPPLY 0-100VActiveBench (AC to DC)85 ~ 265VAC2 - Immediate
3 - Factory Stock
Z100-4-LAN-U product page link
View More
Published: 2012-08-29