E-Switch Briefcase Solutions

E-Switch is a supplier of broad-based electromechanical switches. Our products consist of low to high power solutions. Below is a visual aid sampling of some Panel Mount, Illuminated and PCB Mount switches. Click on the interactive briefcases below to learn more.

This includes many rocker switches, pushbutton switches, toggle switches and more, with illumination options, custom marking options, sealed, and power rated. Choose a switch below for more information.

Panel Mount Switch Series

300 Series Miniature Rocker and Paddle Switches

300 Series Miniature Rocker and Paddle Switches

• Up to 5A 120VAC or 28VDC rating, also available in gold
• Panel or PC board mount design
• Up to 4 poles momentary and maintained functions
500 Series Miniature Slide Switches

500 Series Miniature Slide Switches

• 1 or 2 poles with up to 3 positions
• Panel or PC board mounting designs
• Vertical and horizontal actuation options
700 Series Snap-Acting Push Button Switches

700 Series Snap-Acting Push Button Switches

• 3A 120VAC or 28VDC rating
• Through hole mounting design
• 1 or 2 poles momentary functions
• Variety of bushing and terminal options
700 Series Snap-Acting, Panel Mount Push Button Switches

700 Series Snap-Acting, Panel Mount Push Button Switches

• 3A 120VAC or 28VDC rating
• 1 or 2 poles momentary functions 
• Panel mount design
• Solder lug and quick connect termination
700C Series Alternate Action, Miniature Pushbutton Switch

700C Series Alternate Action, Miniature Pushbutton Switch

• 3A 120VAC or 28VDC rating
• Through hole mounting design
• 1 pole momentary function
• Variety of bushing and terminal options
800 Series Sub-Miniature Pushbutton Switches

800 Series Sub-Miniature Pushbutton Switches

• 3A 120VAC or 28VDC rating
• Through hole mounting design
• 1 pole momentary functions
• Variety of bushing and terminal options
KJD17 Series Heavy Duty, Industrial Power Pushbutton Switches

KJD17 Series Heavy Duty, Industrial Power Pushbutton Switches

• 46mm x 22mm x 2.5mm panel cutout
• 16A 120VAC 1/2HP with IP54 rating
• Off-On, Off-On with Remote Trip, and NO and NC with Remote Trip functions
KO Series Keylock Switches

KO Series Keylock Switches

• Up to 4A 125VAC available dependent on series
• Panel mount design
• From 1 to 5,000 key codes dependent on series
• A variety of key types and key pull options
L16 Series Illuminated, Pilot Indicator

L16 Series Illuminated, Pilot Indicator

• 8A 125VAC rating
• Circular, rectangular, and square panel mount designs
• Full illumination options
• Exclusively a pilot indicator light
LA Series Process Sealed, Illuminated Pushbutton Switches

LA Series Process Sealed, Illuminated Pushbutton Switches

• 8A 125VAC rating
• Circular panel cutouts from 22mm to 30.5mm in diameter
• Full illumination options
• Momentary, maintained and pilot functions
LP1 Series Illuminated, Round Pushbutton with Multiple Color Options

LP1 Series Illuminated, Round Pushbutton with Multiple Color Options

• 100mA 30VDC rating
• 8.2mm panel cutout
• Full LED illumination options
• 1 pole momentary function
MDP-16 Series Modular Pushbutton Switch - Interchangeable Actuators

MDP-16 Series Modular Pushbutton Switch - Interchangeable Actuators

• 8A 125VAC rating
• Circular, rectangular, and square panel mount design
• Full illumination options
• 1 or 2 poles momentary and maintained functions
P16 Series Illuminated Pushbutton Switches

P16 Series Illuminated Pushbutton Switches

• 8A 125VAC rating
• Circular, rectangular, and square panel mount designs
• Momentary and maintained functions
• Exclusive socket design
P197 Series Power Pushbutton Switches

P197 Series Power Pushbutton Switches

• 10A 125VAC rating
• Panel and PC board mount options
• 1 or 2 poles momentary and maintained functions
P227 Series Power Pushbutton Switches

P227 Series Power Pushbutton Switches

• 7A 125VAC rating
• Panel and PC board mount design
• 2 poles momentary and maintained functions
PA4 Series Illuminated, Power Pushbutton Switches

PA4 Series Illuminated, Power Pushbutton Switches

• 16A 125VAC rating
• 13mm x 19mm panel cutout
• Full illumination options
PB1973 Series Snap in, Illuminated, Panel Mount Pushbutton

PB1973 Series Snap in, Illuminated, Panel Mount Pushbutton

• 15A 250VAC rating
• 13mm x 19.2mm panel cutout
• Full illumination options
• 1 or 2 poles momentary and maintained functions
PB2 Series Illuminated, Power Pushbutton Switches

PB2 Series Illuminated, Power Pushbutton Switches

• 20A 125VAC with IP54 rating
• 22mm x 30mm panel cutout
• Spot illumination options
PP1 Series Push Pull Pushbutton Switches

PP1 Series Push Pull Pushbutton Switches

• 16A 125VAC 1HP rating
• 13.3mm x 28.2mm panel cutout
• 1 pole push-pull function
PP2 Series Push Pull Pushbutton Switches

PP2 Series Push Pull Pushbutton Switches

• 16A 125VAC 1HP rating
• 13.5mm x 36mm panel cutout
• 2 poles push-pull function
PR1 Series Round, Illuminated, Power Pushbutton Switches

PR1 Series Round, Illuminated, Power Pushbutton Switches

• 16A 125VAC 3/4HP rating
• 25mm diameter panel cutout
• Full illumination options
PV1 Series Long Life, Water Resistant Anti-vandal Switches

PV1 Series Long Life, Water Resistant Anti-vandal Switches

• 19mm diameter panel cutout
• 1 pole Off-(On) with IP65 rating
• Solder and screw terminal options available
PV2 Series Water Resistant, Long Life Anti-vandal Switches

PV2 Series Water Resistant, Long Life Anti-vandal Switches

• 16mm diameter panel cutout
• 1 pole Off-(On) with IP65 rating
• Solder and screw terminal options available
PV3 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV3 Series Illuminated, Sealed, Long Life Anti-vandal Switches

• 16mm diameter panel cutout
• Dot and ring illumination options available
• 1 or 2 poles momentary functions
• Up to IP65 rating
PV4 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV4 Series Illuminated, Sealed, Long Life Anti-vandal Switches

• 19mm diameter panel cutout
• Dot and ring illumination options available 
• 1 or 2 poles maintained, momentary and double break functions with IP65 rating
PV5 Series Sealed, Long Life Anti-vandal Switches

PV5 Series Sealed, Long Life Anti-vandal Switches

• 12mm diameter panel cutout
• Solder terminal options available 
• 1 pole momentary switch
• IP65 rated
PV6 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV6 Series Illuminated, Sealed, Long Life Anti-vandal Switches

• 16mm diameter panel cutout
• 1 pole Off-(On) with IP65 rating
• Dot and ring illumination options available
• Solder terminal options available
PV7 Series Sealed, Long Life, Illuminated Anti-vandal Switches

PV7 Series Sealed, Long Life, Illuminated Anti-vandal Switches

• 22mm diameter panel cutout
• Dot and ring illumination options available 
• 2 poles maintained and momentary functions
• IP65 rated
PV8 Series Illuminated, Sealed Anti-vandal Switches

PV8 Series Illuminated, Sealed Anti-vandal Switches

• 25mm diameter panel cutout
• Dot and ring illumination options available 
• 1 or 2 poles maintained and momentary functions
• IP65 rated
R1973 Series Illuminated Rocker Switches

R1973 Series Illuminated Rocker Switches

• 9A 125VAC rating
• 13mm x 19.2mm panel cutout
• Full illumination options
• 1 or 2 pole maintained functions
R4 Series Illuminated Rocker Switches

R4 Series Illuminated Rocker Switches

• 20A 125VAC rating
• 11mm x 30mm panel cutout
• Full illumination options
R5 Series Illuminated Rocker Switches

R5 Series Illuminated Rocker Switches

• 20A 125VAC rating
• 22mm x 30mm panel cutout
• Full illumination options
R6 Series Slim-line Rocker Switches

R6 Series Slim-line Rocker Switches

• 10A 125VAC rating
• 6.65mm x 19.2mm panel cutout
• 1 pole maintained and momentary functions
RA1 Series Power Rocker Switches With PVC Cap

RA1 Series Power Rocker Switches With PVC Cap

• Up to 16A 125VAC rating
• 13mm x 19.2mm panel cutout
• Full illumination options
RA2 Series Power Rocker Switches UL Rated

RA2 Series Power Rocker Switches UL Rated

• Up to 16A 125VAC 1/3HP rating
• 22mm x 19.2mm panel cutout
• 1 or 2 pole maintained and momentary functions
RA4 Series Power Rocker Switches UL Rated

RA4 Series Power Rocker Switches UL Rated

• Up to 16A 125VAC 1/3HP rating
• 22mm x 19.2mm panel cutout
• 1 or 2 pole maintained and momentary functions
RA8 Series Illuminated Power Rocker Switch

RA8 Series Illuminated Power Rocker Switch

• 16A 125VAC rating
• 13mm x 19mm panel cutout
• 1 or 2 pole maintained functions
RB1 Series Illuminated Power Rocker Switches

RB1 Series Illuminated Power Rocker Switches

• 20A 125VAC 3/4HP rating
• 11mm x 30mm panel cutout
• Full or spot illumination options
RB2 Series Illuminated, Power Rocker Switches

RB2 Series Illuminated, Power Rocker Switches

• 20A 125VAC 3/4HP rating
• 22mm x 30mm panel cutout
• Full or spot illumination options
RB4 Series Illuminated, Power Rocker Switches

RB4 Series Illuminated, Power Rocker Switches

• 16A 125VAC rating
• 22mm x 30mm panel cutout
• Full or spot illumination options
RBW2 Series Fully Illuminated IP66 Rated Rocker Switch

RBW2 Series Fully Illuminated IP66 Rated Rocker Switch

• 16(16)A 125VAC 1/3HP rating
• 22mm x 30mm panel cutout
• Full illumination options
• IP66 rated
RD1 Series Compact, Power Rocker Switches

RD1 Series Compact, Power Rocker Switches

• Up to 16A 125VAC 1/3HP rating
• 6.8mm x 19.4mm panel cutout
• 1 pole Off-On function
RE1 Series Oval, Power Rocker Switches

RE1 Series Oval, Power Rocker Switches

• Up to 16A 125VAC 1/3HP rating
• 13.5mm x 23.3mm oval panel cutout
• Full illumination options
RP3508 Series Round, Illuminated Pushbutton

RP3508 Series Round, Illuminated Pushbutton

• 3A 125VAC rating
• 15mm x 16mm rounded edge panel cutout
• Full LED illumination options
• 1 pole momentary and maintained functions
RP8100 Series Round, Illuminated Pushbutton

RP8100 Series Round, Illuminated Pushbutton

• 125mA 125VAC rating
• 13.6mm diameter panel cutout
• 1 pole momentary function
• IP65 sealed
RP8200 Series Illuminated, Round Pushbutton Switch

RP8200 Series Illuminated, Round Pushbutton Switch

• 100mA 24VDC rating
• 13.6mm diameter panel cutout
• 200,000 cycle life expectancy
• IP65 sealed
RP8300 Series Round, Illuminated, Panel Mount Pushbutton Switch

RP8300 Series Round, Illuminated, Panel Mount Pushbutton Switch

• 125mA 125VAC rating; 100mA 50VDC rating
• 13.6mm diameter panel cutout
• 1 pole momentary function
• IP65 sealed
RP8400 Series Square, Illuminated Pushbutton Switch

RP8400 Series Square, Illuminated Pushbutton Switch

• 100mA 50VDC rating; 125mA 125VAC rating
• 13.6mm diameter panel cutout
• 500,000 cycle life expectancy
• IP65 sealed
RR1 Series Illuminated, Round Power Rocker Switch

RR1 Series Illuminated, Round Power Rocker Switch

• Up to 16A 125VAC 1/3HP rating
• 20mm diameter panel cutout
• Full and spot illumination options
RR3112 Series Round Rocker, Illuminated Panel Mount

RR3112 Series Round Rocker, Illuminated Panel Mount

• 16A 125VAC rating
• 20.2mm diameter panel cutout
• Full illumination options
• 1 pole momentary and maintained functions
RR3130 Series Round Rocker for Panel Mounting

RR3130 Series Round Rocker for Panel Mounting

• 10A 125VAC rating
• 18.2mm diameter panel cutout
• 1 or 2 pole maintained functions
RR3402 Series Panel Mount, Paddle Style Rocker

RR3402 Series Panel Mount, Paddle Style Rocker

• 6A 125VAC rating
• 15mm diameter panel cutout
• Paddle actuator design
• 1 pole maintained functions
RR5 Series Round, Power Rocker Switches

RR5 Series Round, Power Rocker Switches

• 20A 125VAC rating
• 20mm diameter panel cutout
• 1 pole maintained and momentary functions
RR8 Series Round, Illuminated Power Rocker Switches

RR8 Series Round, Illuminated Power Rocker Switches

• Up to 16A 125VAC 1/3HP rating
• 20mm diameter panel cutout
• Full illumination options
RRA Series Round, Illuminated Power Rocker Switches

RRA Series Round, Illuminated Power Rocker Switches

• Up to 15A 125VAC 1/3HP rating
• 22mm diameter panel cutout
• Full illumination options
RRG3 Series Round, Power Rocker Switches

RRG3 Series Round, Power Rocker Switches

• Up to 16A 125VAC 1/3HP rating
• 20mm diameter panel cutout
• 1 pole maintained and momentary functions
RRGA Series Round, Power Rocker Switches

RRGA Series Round, Power Rocker Switches

• Up to 16A 125VAC 1/3HP rating
• 22mm diameter panel cutout
• 1 pole maintained and momentary functions
RSC Series Power Rocker Switch With Illumination and Bi-Color Actuator Options

RSC Series Power Rocker Switch With Illumination and Bi-Color Actuator Options

• 20A 125VAC 1/4HP rating
• Full illumination options 
• 4 different panel cutouts ranging between 12.1 and 13.9mm x 27.2 and 28.6mm
RVW Series Full Size Power Rocker Switches

RVW Series Full Size Power Rocker Switches

• 20A 125VAC 2HP rating
• 37.5mm x 21mm panel cutout
• 1 or 2 pole maintained and momentary functions
• IP54 rated
ST-1 Series High Amp Toggle Switches

ST-1 Series High Amp Toggle Switches

• Up to 20A 125VAC 2HP rating
• 1 pole, 1 or 2 throws maintained and momentary functions
• 12mm diameter panel cutout
ST-2 Series Power Toggle Switches

ST-2 Series Power Toggle Switches

• Up to 20A 125VAC 2HP rating
• 2 poles, 1 or 2 throws maintained and momentary functions
• 12mm diameter panel cutout
ST-3 Series Power Toggle Switches

ST-3 Series Power Toggle Switches

• Up to 24A 125VAC 2HP rating
• 3 poles, 1 or 2 throws maintained and momentary functions
• 12mm diameter panel cutout
WB2 Series 20 Amp Power Rocker Switches

WB2 Series 20 Amp Power Rocker Switches

• Up to 20A 125VAC 2HP
• 22mm x 30mm panel cutout
• 2 pole maintained and momentary functions 
• IP55 rated

This kit includes many tact switches and pushbutton switches and offers a vast array of cap options, right angle and thru hole mounts. Choose a switch below for more information.

Illuminated Switch Series

5500 Series Illuminated Pushbutton Switches

5500 Series Illuminated Pushbutton Switches

• 50mA 12VDC rating
• Through hole mounting design
• Single or dual LED options
• Momentary actuation
D16 Series Illuminated Pushbutton Switches

D16 Series Illuminated Pushbutton Switches

• 8A 125VAC rating
• Circular, rectangular, and square panel mount designs
• Momentary and maintained functions
• Exclusive solder lug design
L16 Series Illuminated, Pilot Indicator

L16 Series Illuminated, Pilot Indicator

• 8A 125VAC rating
• Circular, rectangular, and square panel mount designs
• Full illumination options
• Exclusively a pilot indicator light
LA Series Process Sealed, Illuminated Pushbutton Switches

LA Series Process Sealed, Illuminated Pushbutton Switches

• 8A 125VAC rating
• Circular panel cutouts from 22mm to 30.5mm in diameter
• Full illumination options
• Momentary, maintained and pilot functions
LP1 Series Illuminated, Round Pushbutton with Multiple Color Options

LP1 Series Illuminated, Round Pushbutton with Multiple Color Options

• 100mA 30VDC rating
• 8.2mm panel cutout
• Full LED illumination options
• 1 pole momentary function
LP11 Series Illuminated Pushbutton with Multiple LED Color Options

LP11 Series Illuminated Pushbutton with Multiple LED Color Options

• 100mA 12VDC rating
• Through hole mounting design
• 1 pole momentary function
• Tactile or non-tactile feel options
LP15 Series Illuminated Pushbutton Switch

LP15 Series Illuminated Pushbutton Switch

• 1mA 20VDC rating
• Through hole mounting design
• Full LED illumination options
• 1 pole momentary function
LP16 Series Long Life, Illuminated Pushbutton Switch

LP16 Series Long Life, Illuminated Pushbutton Switch

• 50,000,000 cycle life expectancy
• Long, 3.3mm travel
• Multiple illumination options
• 2 cap sizes
LP2 Series Illuminated Pushbutton Switch

LP2 Series Illuminated Pushbutton Switch

• 5mA 5VDC rating
• Through hole mounting design
• Full LED illumination options
• 1 pole momentary function
LP37 Series Illuminated, Right Angle Pushbutton Switch

LP37 Series Illuminated, Right Angle Pushbutton Switch

• 10mA 20mVDC to 250mA 50VDC
• Right angle surface mount design
• Multiple LED illumination options
• SPDT momentary function
LP4 Series Illuminated Pushbutton Switch

LP4 Series Illuminated Pushbutton Switch

• 100mA 30VDC rating
• Right angle and vertical through hole mount design
• Full LED illumination options
• 2 poles momentary and maintained functions
LP6 Series Illuminated Pushbutton with Multiple LED Color Options

LP6 Series Illuminated Pushbutton with Multiple LED Color Options

• 12mA 12VDC rating
• Through hole mount design
• Full LED illumination options
• 1 or 2 poles momentary functions
MDP-16 Series Modular Pushbutton Switch - Interchangeable Actuators

MDP-16 Series Modular Pushbutton Switch - Interchangeable Actuators

• 8A 125VAC rating
• Circular, rectangular, and square panel mount design
• Full illumination options
• 1 or 2 poles momentary and maintained functions
P16 Series Illuminated Pushbutton Switches

P16 Series Illuminated Pushbutton Switches

• 8A 125VAC rating
• Circular, rectangular, and square panel mount designs
• Momentary and maintained functions
• Exclusive socket design
PA4 Series Illuminated, Power Pushbutton Switches

PA4 Series Illuminated, Power Pushbutton Switches

• 16A 125VAC rating
• 13mm x 19mm panel cutout
• Full illumination options
PB1973 Series Snap in, Illuminated, Panel Mount Pushbutton

PB1973 Series Snap in, Illuminated, Panel Mount Pushbutton

• 15A 250VAC rating
• 13mm x 19.2mm panel cutout
• Full illumination options
• 1 or 2 poles momentary and maintained functions
PB2 Series Illuminated, Power Pushbutton Switches

PB2 Series Illuminated, Power Pushbutton Switches

• 20A 125VAC with IP54 rating
• 22mm x 30mm panel cutout
• Spot illumination options
PR1 Series Round, Illuminated, Power Pushbutton Switches

PR1 Series Round, Illuminated, Power Pushbutton Switches

• 16A 125VAC 3/4HP rating
• 25mm diameter panel cutout
• Full illumination options
PV3 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV3 Series Illuminated, Sealed, Long Life Anti-vandal Switches

• 16mm diameter panel cutout
• Dot and ring illumination options available
• 1 or 2 poles momentary functions
• Up to IP65 rating
PV4 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV4 Series Illuminated, Sealed, Long Life Anti-vandal Switches

• 19mm diameter panel cutout
• Dot and ring illumination options available 
• 1 or 2 poles maintained, momentary and double break functions with IP65 rating
PV6 Series Illuminated, Sealed, Long Life Anti-vandal Switches

PV6 Series Illuminated, Sealed, Long Life Anti-vandal Switches

• 16mm diameter panel cutout
• 1 pole Off-(On) with IP65 rating
• Dot and ring illumination options available
• Solder terminal options available
PV7 Series Sealed, Long Life, Illuminated Anti-vandal Switches

PV7 Series Sealed, Long Life, Illuminated Anti-vandal Switches

• 22mm diameter panel cutout
• Dot and ring illumination options available 
• 2 poles maintained and momentary functions
• IP65 rated
PV8 Series Illuminated, Sealed Anti-vandal Switches

PV8 Series Illuminated, Sealed Anti-vandal Switches

• 25mm diameter panel cutout
• Dot and ring illumination options available 
• 1 or 2 poles maintained and momentary functions
• IP65 rated
R1966 Series Illuminated Rocker Switches

R1966 Series Illuminated Rocker Switches

• 15A 125VAC rating
• 13mm x 19.2mm panel cutout
• Full LED illumination options
R1973 Series Illuminated Rocker Switches

R1973 Series Illuminated Rocker Switches

• 9A 125VAC rating
• 13mm x 19.2mm panel cutout
• Full illumination options
• 1 or 2 pole maintained functions
R4 Series Illuminated Rocker Switches

R4 Series Illuminated Rocker Switches

• 20A 125VAC rating
• 11mm x 30mm panel cutout
• Full illumination options
R5 Series Illuminated Rocker Switches

R5 Series Illuminated Rocker Switches

• 20A 125VAC rating
• 22mm x 30mm panel cutout
• Full illumination options
WBL Series Illuminated, Right-Angle Pushbutton Switch

WBL Series Illuminated, Right-Angle Pushbutton Switch

• 300mA 30VDC
• Right angle through hole mount design
• Multiple LED colors, including bi-color LEDs
• DPDT & 4PDT momentary and maintained functions
RA1 Series Power Rocker Switches With PVC Cap

RA1 Series Power Rocker Switches With PVC Cap

• Up to 16A 125VAC rating
• 13mm x 19.2mm panel cutout
• Full illumination options
RA2 Series Power Rocker Switches UL Rated

RA2 Series Power Rocker Switches UL Rated

• Up to 16A 125VAC 1/3HP rating
• 22mm x 19.2mm panel cutout
• 1 or 2 pole maintained and momentary functions
RA4 Series Power Rocker Switches UL Rated

RA4 Series Power Rocker Switches UL Rated

• Up to 16A 125VAC 1/3HP rating
• 22mm x 19.2mm panel cutout
• 1 or 2 pole maintained and momentary functions
RA8 Series Illuminated Power Rocker Switch

RA8 Series Illuminated Power Rocker Switch

• 16A 125VAC rating
• 13mm x 19mm panel cutout
• 1 or 2 pole maintained functions
RB1 Series Illuminated Power Rocker Switches

RB1 Series Illuminated Power Rocker Switches

• 20A 125VAC 3/4HP rating
• 11mm x 30mm panel cutout
• Full or spot illumination options
RB2 Series Illuminated, Power Rocker Switches

RB2 Series Illuminated, Power Rocker Switches

• 20A 125VAC 3/4HP rating
• 22mm x 30mm panel cutout
• Full or spot illumination options
RB4 Series Illuminated, Power Rocker Switches

RB4 Series Illuminated, Power Rocker Switches

• 16A 125VAC rating
• 22mm x 30mm panel cutout
• Full or spot illumination options
RBW2 Series Fully Illuminated IP66 Rated Rocker Switch

RBW2 Series Fully Illuminated IP66 Rated Rocker Switch

• 16(16)A 125VAC 1/3HP rating
• 22mm x 30mm panel cutout
• Full illumination options
• IP66 rated
RE1 Series Oval, Power Rocker Switches

RE1 Series Oval, Power Rocker Switches

• Up to 16A 125VAC 1/3HP rating
• 13.5mm x 23.3mm oval panel cutout
• Full illumination options
RP3508 Series Round, Illuminated Pushbutton

RP3508 Series Round, Illuminated Pushbutton

• 3A 125VAC rating
• 15mm x 16mm rounded edge panel cutout
• Full LED illumination options
• 1 pole momentary and maintained functions
RP8100 Series Round, Illuminated Pushbutton

RP8100 Series Round, Illuminated Pushbutton

• 125mA 125VAC rating
• 13.6mm diameter panel cutout
• 1 pole momentary function
• IP65 sealed
RP8200 Series Illuminated, Round Pushbutton Switch

RP8200 Series Illuminated, Round Pushbutton Switch

• 100mA 24VDC rating
• 13.6mm diameter panel cutout
• 200,000 cycle life expectancy
• IP65 sealed
RP8300 Series Round, Illuminated, Panel Mount Pushbutton Switch

RP8300 Series Round, Illuminated, Panel Mount Pushbutton Switch

• 125mA 125VAC rating; 100mA 50VDC rating
• 13.6mm diameter panel cutout
• 1 pole momentary function
• IP65 sealed
RP8400 Series Square, Illuminated Pushbutton Switch

RP8400 Series Square, Illuminated Pushbutton Switch

• 100mA 50VDC rating; 125mA 125VAC rating
• 13.6mm diameter panel cutout
• 500,000 cycle life expectancy
• IP65 sealed
RR1 Series Illuminated, Round Power Rocker Switch

RR1 Series Illuminated, Round Power Rocker Switch

• Up to 16A 125VAC 1/3HP rating
• 20mm diameter panel cutout
• Full and spot illumination options
RR3112 Series Round Rocker, Illuminated Panel Mount

RR3112 Series Round Rocker, Illuminated Panel Mount

• 16A 125VAC rating
• 20.2mm diameter panel cutout
• Full illumination options
• 1 pole momentary and maintained functions
RR8 Series Round, Illuminated Power Rocker Switches

RR8 Series Round, Illuminated Power Rocker Switches

• Up to 16A 125VAC 1/3HP rating
• 20mm diameter panel cutout
• Full illumination options
RRA Series Round, Illuminated Power Rocker Switches

RRA Series Round, Illuminated Power Rocker Switches

• Up to 15A 125VAC 1/3HP rating
• 22mm diameter panel cutout
• Full illumination options
RSC Series Power Rocker Switch With Illumination and Bi-Color Actuator Options

RSC Series Power Rocker Switch With Illumination and Bi-Color Actuator Options

• 20A 125VAC 1/4HP rating
• Full illumination options 
• 4 different panel cutouts ranging between 12.1 and 13.9mm x 27.2 and 28.6mm
TL1220 Series Illuminated Multi-Option Tact Switch

TL1220 Series Illuminated Multi-Option Tact Switch

• Multiple illuminated cap options
• Single color LED options
• 180 ± 50 gram force
• PC board mount design
TL1240 Series Illuminated Tact Switches

TL1240 Series Illuminated Tact Switches

• 6mm x 6mm tactile switch
• 160 ± 50 gram force
• Multiple LED color options
• Silver plated contacts
TL1250 Series Illuminated Right Angle Tact Switch

TL1250 Series Illuminated Right Angle Tact Switch

• 6.8mm x 8.3mm tactile switch
• 120 ± 60; 180 ± 60; 280 ± 70 gram force options
• Right angle through hole mount design
• Silver or gold plated contacts
TL1260 Series Right Angle Illuminated Tact Switch

TL1260 Series Right Angle Illuminated Tact Switch

• 6.8mm x 7mm tactile switch
• 160 ± 50 gram force option
• LED illumination options
• Right angle through hole mount design
TL1265 Series Illuminated Vertical Tact Switch

TL1265 Series Illuminated Vertical Tact Switch

• 6.8mm x 7mm tactile switch
• 160 ± 50 gram force option
• LED illumination options
• Vertical through hole mount design
TL1290 Series Right Angle Illuminated Tactile Switch

TL1290 Series Right Angle Illuminated Tactile Switch

• 9.45mm x 8mm tactile switch
• 400 ± 125 gram force option
• Right angle through hole mount design
TL2205 Series Illuminated Pushbutton Switches

TL2205 Series Illuminated Pushbutton Switches

• 100mA 30VDC
• Through hole mount design
• Multiple LED illumination options 
• DPDT momentary and maintained functions
TL3200 Series SMT Tact Switch

TL3200 Series SMT Tact Switch

• 6.8mm x 4.5mm tactile switch
• 160 +75/-30 gram force
• Single or dual illumination options
• Surface mount design
TL3210 Series Miniature Illuminated Tact Switch

TL3210 Series Miniature Illuminated Tact Switch

• 5.6mm x 3.4mm tactile switch
• 160 ± 50 gram force options
• Surface mount design
• Tape & reel packaging
TL3240 Series Illuminated SMT Tact Switch

TL3240 Series Illuminated SMT Tact Switch

• 6mm x 7.8mm tactile switch
• 100, 160 & 260 gram force options
• Surface mount design
• Tape & reel packaging
TL3253 Series Dual LED Tact Switch

TL3253 Series Dual LED Tact Switch

• 7.5mm x 22.6mm tactile switch
• 160 gram force
• Dual LEDs
• Right angle mount
ULP Series Illuminated Pushbutton

ULP Series Illuminated Pushbutton

• 500mA 25VDC rating
• Panel or PC board mount design with several button options
• Full LED illumination options
• 1 or 2 poles momentary and maintained functions

This briefcase includes a huge number of tact switches, rocker switches, pushbutton switches, slide switches, snap action switches and more. Choose a switch below for more information.

PCB Mount Switch Series

200B Series Sealed SMT Sub-Miniature Toggle Switches

200B Series Sealed SMT Sub-Miniature Toggle Switches

• 3A 120VAC rating, also available in gold
• Surface mount design
• 1 pole momentary and maintained functions
• IP67 sealed
400B Series Sub-Miniature SMT, Sealed Rocker

400B Series Sub-Miniature SMT, Sealed Rocker

• 3A 120VAC rating, also available in gold
• Surface mount design
• 1 pole momentary and maintained functions
• IP67 sealed
500A Series Sub-Miniature Slide Switches

500A Series Sub-Miniature Slide Switches

• 1 pole with up to 3 positions
• Panel, surface mount, and PC board mounting designs
• Vertical and horizontal actuation options
800B Series Sealed, Sub-Miniature Pushbutton Switches

800B Series Sealed, Sub-Miniature Pushbutton Switches

• 3A 120VAC or 28VDC rating
• Surface mount design
• 1 pole either in single or double throw options
• Tape and reel packaging available
900 Series Sub-Miniature SMT Detector Switch

900 Series Sub-Miniature SMT Detector Switch

• Surface mount detector switch
• 100mA 50VDC rating
• Right angle actuation
• Low operating force
EG Series Sub-Miniature Slide Switches

EG Series Sub-Miniature Slide Switches

• Up to 6 poles available or up to 6 positions
• Panel and PC board mounting designs
• Vertical and horizontal actuation options
JS1300 Series 5-position Navigation Switch

JS1300 Series 5-position Navigation Switch

• 5 position navigation switch
• 9.8mm x 9.8mm base
• Only 1.55mm tall
• Surface mount design
JS1400 Series 5-position Navigation Switch

JS1400 Series 5-position Navigation Switch

• 5 position navigation switch
• 7.4mm x 7.7mm
• 3 different actuator height options
• Surface mount design
JS5208 Series 5-position Navigation Switch

JS5208 Series 5-position Navigation Switch

• 5 position navigation switch
• 12.4mm x 12.4mm base
• 12.2mm tall
• Surface mount design
KAJ Series Low Profile Dip Switches

KAJ Series Low Profile Dip Switches

• Through hole and surface mount DIP Switch
• From 2 to 12 positions
• Tape sealing available
• Tube or tape and reel packaging options
KAN Series Half-Pitch Low Profile Dip Switches

KAN Series Half-Pitch Low Profile Dip Switches

• Half-Pitch surface mount DIP Switch
• From 2 to 10 positions
• Tape sealing available
• Tube or tape and reel packaging options
LP37 Series Illuminated, Right Angle Pushbutton Switch

LP37 Series Illuminated, Right Angle Pushbutton Switch

• 10mA 20mVDC to 250mA 50VDC
• Right angle surface mount design
• Multiple LED illumination options
• SPDT momentary function
RDM Series Rotary Dip Switch

RDM Series Rotary Dip Switch

• Offers IP67 sealing protection
• 10 or 16 positions
• Right angle or vertical mount
• Ultra slim size
RDT Series Rotary DIP Switch

RDT Series Rotary DIP Switch

• Offers IP67 sealing protection
• 4, 6, 8, 10 or 16 positions
• Right angle or vertical mount
• SMT or thru hole
TL1014 Series Micro-Miniature Right Angle SMT Tact

TL1014 Series Micro-Miniature Right Angle SMT Tact

• 4.7mm x 3.5mm tactile switch
• 180 ± 50 gram force
• Right angle surface mount design
• Silver plated contacts
TL1015 Series Micro-Miniature Tact Switch

TL1015 Series Micro-Miniature Tact Switch

• 3mm x 4mm tactile switch
• 160 ± 50 gram force
• Surface mount design
• Silver plated contacts
TL3200 Series SMT Tact Switch

TL3200 Series SMT Tact Switch

• 6.8mm x 4.5mm tactile switch
• 160 +75/-30 gram force
• Single or dual illumination options
• Surface mount design
TL3210 Series Miniature Illuminated Tact Switch

TL3210 Series Miniature Illuminated Tact Switch

• 5.6mm x 3.4mm tactile switch
• 160 ± 50 gram force options
• Surface mount design
• Tape & reel packaging
TL3240 Series Illuminated SMT Tact Switch

TL3240 Series Illuminated SMT Tact Switch

• 6mm x 7.8mm tactile switch
• 100, 160 & 260 gram force options
• Surface mount design
• Tape & reel packaging
TL3300 Series SMT Tact Switch

TL3300 Series SMT Tact Switch

• 12mm x 12mm tactile switch
• 160, 260, 320, 520 gram force options
• Surface mount design
• Multiple actuator options
TL3301 Series SMT Tactile Switches

TL3301 Series SMT Tactile Switches

• 6mm x 6mm tactile switch
• 100 ± 50; 160 ± 50; 260 ± 50 gram force options
• Surface mount design
• Silver or gold plated contacts
TL3302 Series 3.5mm x 6mm SMT Tactile Switch

TL3302 Series 3.5mm x 6mm SMT Tactile Switch

• 3.5mm x 6mm tactile switch
• 130 ± 50; 180 ± 50; 260 ± 50 gram force options
• Surface mount design
• Silver plated contacts
TL3303 Series 6mm x 6mm SMT Tact Switch

TL3303 Series 6mm x 6mm SMT Tact Switch

• 6mm x 6mm tactile switch
• 100 ± 50; 160 ± 50; 260 ± 50 gram force options
• Surface mount design
• Silver plated contacts
TL3313 Series Sub-Miniature Tactile Switch with Small Foot Print

TL3313 Series Sub-Miniature Tactile Switch with Small Foot Print

• 4.8mm x 4.8mm tactile switch
• 100 ± 50; 160 ± 50; 250 ± 50 gram force options
• Surface mount design
• Silver plated contacts
TL3315 Series Low Profile SMT Tactile Switch

TL3315 Series Low Profile SMT Tactile Switch

• 4.5mm x 4.5mm tactile switch
• Ultra low profile with .55mm height
• 100 ± 30; 160 ± 50; 250 ± 50 gram force options
• Surface mount design
TL3330 Series SMT Right Angle Tactile Switch

TL3330 Series SMT Right Angle Tactile Switch

• 6.9mm x 3.3mm tactile switch
• 100 ± 40; 200 ± 50 gram force options
• Right angle surface mount design
• Silver plated contacts
TL3340 Series SMT Sub-Miniature Tactile Switch

TL3340 Series SMT Sub-Miniature Tactile Switch

• 4.25mm x 3.3mm tactile switch
• 160 ± 50 gram force options
• Surface mount design
• Silver plated contacts
TL3700 Series Ultra Miniature Micro Tact Switch SMT

TL3700 Series Ultra Miniature Micro Tact Switch SMT

• 3.0mm x 2.6mm x 0.65mm tactile switch
• Up to 100,000 cycles life expectancy
• 100gf and 160gf options
• Surface mount design
TL6120 Series Process Sealed SMT Tactile Switch

TL6120 Series Process Sealed SMT Tactile Switch

• 7.2mm x 7.2mm tactile switch
• 130 ± 50; 160 ± 50; 300 ± 50; 500 ± 100 gf options
• Surface mount design 
• Process sealed
TL6700 Series Sealed SMT Tactile Switch

TL6700 Series Sealed SMT Tactile Switch

• 6.9mm x 6.2mm tactile switch
• 160 ± 50; 260 ± 50 gram force options
• Surface mount design
• Process sealed
TS2 Series Surface Mount Snap Action Switch

TS2 Series Surface Mount Snap Action Switch

• 100mA 125VAC or 48VDC rating
• 3,000,000 cycle life
• Subminiature size
• Surface mount design

 

R5 Series Illuminated Rocker Switches

View product page link View datasheet link

The R5 Series rocker switches, available in both illuminated and non-illuminated versions, are .850 inches in width and are designed to snap into the panel. They are double pole double throw and work great in industrial, audio/visual and lighting ballast applications. This series rocker switch also has horse power ratings, up to 1HP.

SPECIFICATIONS

  • CONTACT RATING:
    • Versions D,G,I: 10A 250VAC, 15A 125VAC
    • Versions A,B,C,E,F,H: 16A 250V, 1HP
    • 20A 125VAC, 3/4 HP
  • MECHANICAL LIFE: 30,000 Cycles
  • ELECTRICAL LIFE: 10,000 Cycles
  • CONTACT RESISTANCE: 20mΩ (Initial)
  • INSULATION RESISTANCE: >1,000MΩ at 500VDC
  • DIELECTRIC STRENGTH: >1,500V AC 1 Minute (Initial)
  • OPERATING TEMP: -20°C to 55°C
  • SAFETY STANDARD APPROVAL: UL, CSA, VDE

MATERIALS

  • BODY: Nylon 6/6 (UL94 V-2)
  • ROCKER: Nylon 6/6 PC for Illuminated Versions (UL94 V-2)
  • CONTACT SURFACE: Silver Nickel Alloy
  • TERMINAL: Silver Plated Brass
  • ILLUMINATED ROCKER: Neon Lamp or Incandescent Bulb

R4 Series Illuminated Rocker Switches

View product page link View datasheet link

The R4 Series rocker switches are available in both illuminated and non-illuminated versions, with neon or incandescent lamps

SPECIFICATIONS

  • CONTACT RATING:
    • Versions D,G,I - 10A 250V, 15A 125VAC
    • Versions A,B,C,E,F,H - 15A 250V, 20A 125VAC
  • MECHANICAL LIFE: 30,000 Cycles
  • ELECTRICAL LIFE: 6,000 Cycles
  • CONTACT RESISTANCE: 20mΩ Max. Typical Initial at 2-4VDC
  • INSULATION RESISTANCE: >1,000MΩ
  • DIELECTRIC STRENGTH: >1,500V for 1 Minute Between Terminals
  • OPERATING TEMP: -20°C to 55°C
  • SAFETY STANDARD APPROVAL: UL, VDE

MATERIALS

  • BODY: Nylon 6/6 (UL94 V-2)
  • ROCKER: Nylon 6/6 (UL94 V-2)
  • CONTACT SURFACE: Silver Over Nickel Alloy
  • TERMINAL: Silver Plated Copper Alloy
  • ILLUMINATED ROCKER: Neon Lamp or Incandescent Bulb

RR3112 Series Round Rocker, Illuminated Panel Mount

View product page link View datasheet link

Introducing the RR3112 round panel-mount rocker in illuminated and non-illuminated verions. There are two illuminated version of the RR3112- Option "B" has NEON wired inline to produce an illuminated actuator, while the "L" option has an LED wired separate and viewable through a window on the actuator.

Great for industrial, audio/visual and lighting ballast operations.

SPECIFICATIONS

  • CONTACT RATING:
    • 16A 125VAC
    • 10A 250VAC
  • LIFE EXPECTANCY (MECHANICAL): 20,000 Cycles
  • LIFE EXPECTANCY (ELECTRICAL): 6,000 Cycles
  • CONTACT RESISTANCE: 50MΩ (Initial)
  • INSULATION RESISTANCE: 100mΩ at 500VDC
  • DIELECTRIC STRENGTH: 1,500V Min. for 1 Minute
  • OPERATING TEMP: 0°C to 65°C

RR3130 Series Round Rocker for Panel Mounting

View product page link View datasheet link

This RR3130 round rocker switch is panel mounted and has a light, ergonomic feel which is great in designing your applications. Markets include use in telecommunications, audio/visual, instrumentation, computers and peripherals, and more.

SPECIFICATIONS

:

  • CONTACT RATING:
    • 10A 125VAC
    • 6A 250VAC
  • MECHANICAL LIFE: 20,000 Cycles
  • ELECTRICAL LIFE: 6,000 Cycles
  • CONTACT RESISTANCE: 50mΩ
  • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
  • DIELECTRIC STRENGTH: 1500V Min. for 1 Minute
  • TERMINATION: Solder Lug, Silver-Plated
  • OPERATING TEMP: 0°C to 65°C
  • STORAGE TEMP: -25°C to 85°C

R1966 Series Illuminated Rocker Switches

View product page link View datasheet link

The R1966 Series illuminated rocker switches are available with a variety of colored housings, actuators and LEDs. The panel cut out size is an industry standard size.

SPECIFICATIONS

  • RATING:
    • 15A 125VAC
    • 8A 250VAC
    • 6A 250VAC
  • MECHANICAL LIFE: 30,000 Cycles
  • ELECTRICAL LIFE: 10,000 Cycles
  • CONTACT RESISTANCE: 20mΩ Typical, Initial
  • INSULATION RESISTANCE: >1,000MΩ
  • DIELECTRIC STRENGTH:
    • >1,500V for 1 Minute
    • >3000V Between Poles
  • OPERATING TEMPERATURE: -30°C to 65°C
  • SAFETY STANDARD APPROVAL: UL, VDE, ENEC
  • MATERIALS

    • TERMINAL: Silver Plated Copper Alloy
    • CONTACT: Coin Silver, Silver Plated

    R1973 Series Illuminated Rocker Switches

    View product page link View datasheet link

    The R1973 Series illuminated rocker switches are available with a variety of colored housings, actuators and LEDs. The panel cut out size is an industry standard size.

    Markets include Audio/Visual, Consumer Electronics and Test/Instrumentation.

    SPECIFICATIONS

    • RATING:
      • 9A 125VAC
      • 6A 250VAC
      • 4A 250VAC
    • MECHANICAL LIFE: 30,000 Cycles
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 20mΩ Max. Typical, Initial
    • INSULATION RESISTANCE: >1,000MΩ
    • DIELECTRIC STRENGTH:
      • >1,500V for 1 Minute
      • >3000V Between Poles
    • OPERATING TEMPERATURE: -30°C to 85°C
    • SAFETY STANDARD APPROVAL: UL, CSA, VDE/ENEC

    MATERIALS

    • CONTACT: Coin Silver, Silver Plated

    R6 Series Slim-line Rocker Switches

    View product page link View datasheet link

    The R6 Series rocker switches are available in SPST and offer a width of .378 inch, presented in a slim-line package design.

    Great for audio/visual, consumer electronics and test/instrumentation applications.

    SPECIFICATIONS

    • CONTACT RATING:
      • 10A 125VAC
      • 6A 250VAC
      • 4(1)A 250VAC
    • MECHANICAL LIFE: 50,000 Cycles
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: <20mΩ (Initial)
    • INSULATION RESISTANCE: >1,000MΩ at 500VDC
    • DIELECTRIC STRENGTH: >1,500VAC for 1 Minute (Initial)
    • OPERATING TEMP: -20°C to 65°C
    • SAFETY STANDARD APPROVAL: UL, cUL

    MATERIALS

    • BODY: Nylon 6/6 (UL94 V-2)
    • ROCKER: Nylon 6/6 (UL94 V-2)
    • CONTACT SURFACE: Coin Silver
    • TERMINAL: Silver Plated Copper Alloy

    WB2 Series 20 Amp Power Rocker Switches

    View product page link View datasheet link

    The WB2 series high amp rocker switch has a panel cutout of 22mm x 30mm and an internal dust and water protection seal, rated to IP55.

    SPECIFICATIONS

    • RATING:
      • Maintained Switches:
        • 20A 125VAC [cULus]
        • 20A 250VAC [cULus]
        • 2HP 125/250VAC [cULus]
        • 22(14)A 250V~ 5E4 T85 [European]
      • Momentary Switches:
        • 20A 125VAC T85 [cULus]
        • 20A 250VAC T85 [cULus]
        • 1.5HP 125/250VAC [cULus]
        • 18(10)A 250V~ 5E4 T85 [European]
    • TEMPERATURE: -20°C to 65°C Min.
    • CONTACT RESISTANCE: 50mΩ Max.
    • INSULATION RESISTANCE: 500MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
    • INGRESS PROTECTION: IP55 Standard

    MATERIALS

    • BODY: Polyamide 6/6
    • ACTUATOR: Polyamide 6/6
    • MOUNTING EARS: Polyamide 6/6
    • RUBBER SEAL: Ethylene Propylene
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Brass

    RVW Series Full Size Power Rocker Switches

    View product page link View datasheet link

    The RVW series high power rated heavy duty full size rocker switch features an internal dust and water protection seal, rated to IP54. Glossy finish option.

    SPECIFICATIONS

    • RATING:
      • Maintained Switches:
        • 20A 125VAC [cULus UL508]
        • 15A 277VAC [cULus UL508]
        • 2HP 220-240VAC [cULus UL508]
      • Momentary Switches:
        • 20A 125VAC [cULus UL508]
        • 15A 277VAC [cULus UL508]
        • 1.5HP 220-240VAC [cULus UL508]
    • TEMPERATURE: -20°C to 55°C
    • ELECTRICAL LIFE: 6,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max.
    • INSULATION RESISTANCE: 800MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
    • INGRESS PROTECTION: IP54 Standard

    MATERIALS

    • BODY: Polyamide 6/6, UL94 V-2
    • ACTUATOR: Polyamide 6/6, UL94 V-2
    • CONTACTS: Silver Alloy
    • TERMINALS: Brass, Silver Plated Brass

    RE1 Series Oval, Power Rocker Switches

    View product page link View datasheet link

    The RE1 series illuminated power switch features a unique oval shape and high ratings with UL and ENEC approvals.

    SPECIFICATIONS

    • RATING:
      • Rating Option C:
        • 16A 125VAC [UL, cUL]
        • 10A 250VAC [UL, cUL]
        • 1/3HP 125/250VAC [UL, cUL]
        • 10(4)A 250V~ 1E4 T125 [SEMKO, ENEC]
        • 10(2)A 250V~ 5E4 T85 [SEMKO, ENEC]
      • Rating Option 3:
        • 10A 125VAC [UL, cUL]
        • 6(2)A 250V~ 1E4 T125 [SEMKO, ENEC]
    • TEMPERATURE:
      • -20°C to 105°C [UL, cUL]
      • -20°C to 125°C [SEMKO, ENEC]
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 35mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute

    MATERIALS

    • BODY: Polyamide 6/6, UL94 V-2
    • ACTUATOR:
      • Polyamide 6/6, UL94 V-2
      • Polycarbonate, UL94 V-2
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Copper

    RA4 Series Power Rocker Switches UL Rated

    View product page link View datasheet link

    The RA4 series illuminated power rocker switch has ratings up to 16A and UL, ENEC approvals. This RA4 series power switch has curved and paddle actuator options, and a PVC cap for dust and water protection.

    SPECIFICATIONS

    • RATING:
      • Rating Option C:
        • 16A 125VAC [UL, cUL]
        • 10A 250VAC [UL, cUL]
        • 1/3HP 125/250VAC 105C [UL, cUL]
        • 10(4)A 250V~ T125 1E4 [SEMKO, ENEC]
        • 10(2)A 250V~ T85 5E4 [SEMKO, ENEC]
      • Rating Option 3:
        • 10A 125VAC [UL, cUL]
        • 6(2)A 250V~ T125 1E4 [SEMKO, ENEC]
    • TEMPERATURE:
      • -20°C to 105°C [UL, cUL]
      • -20°C to 125°C [SEMKO, ENEC]
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 35mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
    • INGRESS PROTECTION: IP54 with PVC Cap

    MATERIALS

    • BODY: Polyamide 6/6, UL94 V-2
    • ACTUATOR:
      • Polyamide 6/6, UL94 V-2
      • Polycarbonate, UL94 V-2
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Copper

    300 Series Miniature Rocker and Paddle Switches

    View product page link View datasheet link

    The 300 Series miniature rocker and paddle switches offer a variety of model styles and actuator options. Available in up to 4 poles they have multiple termination options, and a snap-in panel mount option is available. For use in instrumentation, test equipment, telecommunications, networking, test equipment and more.

    SPECIFICATIONS

    • CONTACT RATING: Dependent Upon Contact Material
    • MECHANICAL LIFE: 40,000 Make-and-Break Cycles
    • CONTACT RESISTANCE: 10mΩ Max. Initial
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS for 1 Minute
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • TERMINAL/SWITCH SUPPORT: Brass or Steel Electrotin Plated
    • CONTACTS/TERMINALS: Silver or Gold Plated Copper Alloy

    RSC Series Power Rocker Switch With Illumination and Bi-Color Actuator Options

    View product page link View datasheet link

    The RSC series illuminated power rocker switch has a bi-color actuator, and 4 bodies to cover many popular cutouts. High current capacity.

    SPECIFICATIONS

    • RATING:
      • Rating Option D:
        • 20A 125VAC [cULus]
        • 16A 250VAC [cULus, CSA]
        • 1/4HP 125/250VAC [CSA]
        • 3/4HP 125/250VAC [cULus]
        • 16(4)A 250V~ 1E4 T85 [ENEC, VDE]
        • 20(8)A 250V~ 1E4 T125 [ENEC, VDE]
        • 10(2)A 250V~ 5E4 T85 [ENEC, VDE]
      • Rating Option C:
        • 15A 125VAC [cULus]
        • 10(4)A 250V~ 1E4 T85 [European]
    • TEMPERATURE:
      • -20°C to 65°C [cULus, CSA]
      • -20°C to 105°C [cULus]
      • -20°C to 85°C [ENEC, VDE]
      • -20°C to 125°C [ENEC, VDE]
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 20mΩ Max. at 1A 5VDC
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,000VAC for 1 Minute

    MATERIALS

    • BODY: Polyamide 6/6, UL94 V-2
    • ACTUATOR:
      • Polyamide 6/6, UL94 V-2
      • Polycarbonate, UL94 V-2
    • CONTACTS: Silver
    • TERMINALS: Silver Plated Copper

    RA2 Series Power Rocker Switches UL Rated

    View product page link View datasheet link

    The RA2 series illuminated power rocker switch has a high rating with UL and ENEC approvals. Has a PVC cap for dust and water protection.

    SPECIFICATIONS

    • RATING:
      • Rating Option C:
        • 16A 125VAC, 10A 250VAC [UL, cUL]
        • 1/3HP 125/250VAC 105C [UL, cUL]
        • 10(4)A 250V~ T125 1E4 [SEMKO, ENEC]
        • 10(2)A 250V~ T85 5E4 [SEMKO, ENEC]
      • Rating Option 3:
        • 10A 125VAC [cULus]
        • 6(2)A 250V~ T125 1E4 [SEMKO, ENEC]
    • TEMPERATURE:
      • -20°C to 105°C [UL, cUL]
      • -20°C to 125°C [SEMKO, ENEC]
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 35mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
    • INGRESS PROTECTION: IP54 with PVC Cap

    MATERIALS

    • BODY: Polyamide 6/6, UL94 V-2
    • ACTUATOR:
      • Polyamide 6/6, UL94 V-2
      • Polycarbonate, UL94 V-2
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Copper

    PV1 Series Long Life, Water Resistant Anti-vandal Switches

    View product page link View datasheet link

    PV1 series water resistant, sealed, anti-vandal switches feature long life and custom laser engraved markings. This anti-vandal switch features a clean, aesthetic look for high end products. This switch has a panel cutout size of 19mm.

    Popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications.

    SPECIFICATIONS

    • RATING: 2A 48VDC
    • TEMPERATURE: -20°C to 55°C
    • MECHANICAL LIFE: 1,000,000 Cycles
    • ELECTRICAL LIFE: 200,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
    • INGRESS PROTECTION: IP65
    • PANEL CUTOUT: 19mm Diameter

    MATERIALS

    • BUSHING:
      • Gold Plated Brass
      • Nickel Plated Brass
      • Stainless Steel
    • ACTUATOR:
      • Gold Plated Brass
      • Nickel Plated Brass
      • Stainless Steel
    • BASE: Polybutylene Terephthalate
    • SEALING:
      • Silicone Rubber
      • Stainless Steel
    • INNER ASSEMBLY:
      • Polyamide 6/6
      • Brass
    • SPRING: Stainless Steel
    • CONTACT: Silver Alloy
    • TERMINALS:
      • Silver Plated Brass
      • Steel
    • HARDWARE: Nickel Plated Brass

    PV2 Series Water Resistant, Long Life Anti-vandal Switches

    View product page link View datasheet link

    PV2 series anti-vandal switch is vandal resistant and water resistant. This anti-vandal switch has a long life expectancy. and a panel cutout size of 16mm.

    Popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications.

    SPECIFICATIONS

    • RATING: 2A 48VDC
    • TEMPERATURE: -20°C to 55°C
    • MECHANICAL LIFE: 1,000,000 Cycles
    • ELECTRICAL LIFE: 200,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
    • INGRESS PROTECTION: IP65
    • PANEL CUTOUT: 16mm Diameter

    MATERIALS

    • BUSHING:
      • Gold Plated Brass
      • Nickel Plated Brass
      • Stainless Steel
    • ACTUATOR:
      • Gold Plated Brass
      • Nickel Plated Brass
      • Stainless Steel
    • BASE: Polybutylene Terephthalate
    • SEALING: Silicone
    • INNER ASSEMBLY:
      • Polyamide 6/6
      • Brass
      • Polyoxymethylene
    • SPRING: Stainless Steel
    • CONTACT: Silver Alloy
    • TERMINALS:
      • Silver Plate Brass
      • Steel
    • HARDWARE: Nickel Plated Brass

    PV3 Series Illuminated, Sealed, Long Life Anti-vandal Switches

    View product page link View datasheet link

    The PV3 series illuminated anti-vandal switch is water resistant to IP40/IP65 ratings, and has many functions including long life expectancy. It has a panel cutout of 16mm, and LED illumination options include a dot or ring.

    These switches are popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications.

    SPECIFICATIONS

    • RATING: 2A 48VDC
    • ILLUMINATION BASE RATING:
      • Red, Yellow and Orange: 20mA 1.8V
      • Blue, Green and White: 20mA 2.8V
    • TEMPERATURE: -20°C to 55°C
    • MECHANICAL LIFE: 200,000 Cycles
    • ELECTRICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
    • INGRESS PROTECTION: IP40/IP65
    • PANEL CUTOUT: 16mm Diameter

    MATERIALS

    • BUSHING:
      • Gold Plated Brass
      • Nickel Plated Brass
      • Stainless Steel
      • Aluminum
    • ACTUATOR:
      • Gold Plated Brass
      • Nickel Plated Brass
      • Stainless Steel
      • Aluminum
      • Polycarbonate
    • BASE:
      • Polybutylene Terephthalate
      • Polycarbonate
    • SEALING:
      • Silicone Rubber
      • Stainless Steel
    • INNER ASSEMBLY:
      • Polyoxymethylene
      • Polycarbonate
      • Silver Plated Brass
      • Stainless Steel
    • SPRING:
      • Stainless Steel
      • Beryllium Copper
    • MOBILE CONTACT: Phosphor Bronze
    • CONTACT: Silver Alloy
    • TERMINALS: Silver Plated Brass
    • HARDWARE: Nickel Plated Brass

    PV4 Series Illuminated, Sealed, Long Life Anti-vandal Switches

    View product page link View datasheet link

    PV4 series anti-vandal switches are water resistant to IP65 ratings. Featuring a colored bezel and multiple actuator options, the PV4 series anti-vandal switches have a long life expectancy. Both dot and ring illumination are available. This switch features a panel cutout size of 19mm.

    The PV4 series anti-vandal switch is popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications.

    SPECIFICATIONS

    • RATING: 2A 48VDC
    • ILLUMINATION BASE RATING:
      • Red, Yellow and Orange: 20mA 1.8V
      • Blue, Green and White: 20mA 2.8V
    • TEMPERATURE: -20°C to 55°C
    • MECHANICAL LIFE: 1,000,000 Cycles
    • ELECTRICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
    • INSULATION RESISTANCE: 1,000MΩ Min. 500VDC
    • DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
    • INGRESS PROTECTION: IP65
    • PANEL CUTOUT: 19mm Diameter

    MATERIALS

    • BUSHING:
      • Stainless Steel
    • Aluminum
    • ACTUATOR:
      • Stainless Steel
      • Aluminum
    • BASE:
      • Polybutylene Terephthalate
      • Polycarbonate
      • Polyamide 6/6
    • SEALING: Silicone
    • INNER ASSEMBLY:
      • Polycarbonate
      • Polyoxymethylene
      • Brass
    • SPRING: Stainless Steel
    • CONTACT: Silver Alloy
    • TERMINALS:
      • Brass
      • Silver Plated Brass
      • Steel
    • HARDWARE: Nickel Plated Brass

    RR3402 Series Panel Mount, Paddle Style Rocker

    View product page link View datasheet link

    The RR3402 rocker switches has an ergonomic feel with multiple circuit options. The RR3402 rocker switch is great for the industrial, audio visual and lighting ballast industries.

    SPECIFICATIONS

    • CONTACT RATING:
      • 6A 125VAC
      • 3A 250VAC
    • MECHANICAL LIFE: 20,000 Cycles
    • ELECTRICAL LIFE: 6,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max. (Initial)
    • INSULATION RESISTANCE: 100MΩ at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
    • OPERATING TEMP: 0°C to 65°C

    MATERIALS

    • TERMINATION: Solder Lug, Silver-Plated

    PV5 Series Sealed, Long Life Anti-vandal Switches

    View product page link View datasheet link

    PV5 anti-vandal switch features a long life expectancy and IP65 rating. It offers a 12mm panel cutout size, and a domed actuator with multiple color options including black, white, yellow, blue, green, red, nickel and stainless steel.

    This switch is popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications.

    SPECIFICATIONS

    • RATING: 2A 48VDC
    • TEMPERATURE: -20°C to 55°C
    • ELECTRICAL LIFE: 200,000 Cycles
    • MECHANICAL LIFE: 1,000,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max. at 1A 12VDC
    • INSULATION RESISTANCE 1,000MΩ Min. 500VDC
    • DIELECTRIC STRENGTH: 2,000VAC for 1 Minute
    • INGRESS PROTECTION: IP65
    • PANEL CUTOUT: 12mm Diameter

    MATERIALS

    • BUSHING:
      • Stainless Steel
      • Nickel Plated Brass
      • Aluminum
    • ACTUATOR:
      • Stainless Steel
      • Nickel Plated Brass
      • Polybutylene Terephthalate
    • BASE: Polybutylene Terephthalate
    • SEALING: Silicone Rubber
    • INNER ASSEMBLY:
      • Polyamide 6/6
      • Brass
    • SPRING: Stainless Steel
    • CONTACT: Silver Alloy
    • TERMINALS:
      • Silver Plated Brass
      • Steel
    • HARDWARE: Nickel Plated Brass

    PV6 Series Illuminated, Sealed, Long Life Anti-vandal Switches

    View product page link View datasheet link

    PV6 series anti vandal switches feature a long life expectancy and are water resistant. Illumination LED colors include red, yellow, orange, blue, green and white. Available with dot or ring illumination and a 16mm panel cutout size.

    Applications include elevator and kiosks, among other designs that require vandal resistance.

    SPECIFICATIONS

    • RATING: 2A 48VDC
    • ILLUMINATION BASE RATING:
      • Red, Yellow and Orange: 20mA 1.8V
      • Blue, Green and White: 20mA 2.8V
    • TEMPERATURE: -20°C to 55°C
    • MECHANICAL LIFE: 1,000.000 Cycles
    • ELECTRICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max.
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 2,000VAC
    • INGRESS PROTECTION: IP65
    • PANEL CUTOUT: 16mm Diameter

    MATERIALS

    • BUSHING:
      • Stainless Steel
      • Nickel
      • Aluminum
      • Polyoxymethlyne
    • ACTUATOR:
      • Stainless Steel
      • Nickel
      • Polycarbonate
      • Polyoxymethylene
      • Aluminum
    • BASE: Poliamide 6/6
    • SEALING: Silicone Rubber
    • INNER ASSEMBLY:
      • Polycarbonate
      • Brass
    • SPRING: Stainless Steel
    • CONTACTS: Silver Alloy
    • TERMINALS: Brass
    • HARDWARE: Nickel Plated Brass

    PV7 Series Sealed, Long Life, Illuminated Anti-vandal Switches

    View product page link View datasheet link

    PV7 series anti vandal switches feature a long life expectancy and are water resistant. Illumination LED colors include red, yellow, orange, blue, green and white. Available in dot or ring illumination. Panel cutout size is 22mm.

    Applications include elevator and kiosks, among other designs that require vandal resistance.

    SPECIFICATIONS

    • RATING: 2A 48VDC
    • ILLUMINATION BASE RATING:
      • Red, Yellow and Orange: 20mA 1.8V
      • Blue, Green and White: 20mA 2.8V
    • TEMPERATURE: -20°C to 55°C
    • MECHANICAL LIFE: 1,000,000 Cycles
    • ELECTRICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max.
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 2,000VAC
    • INGRESS PROTECTION: IP65
    • PANEL CUTOUT: 22mm Diameter

    MATERIALS

    • BUSHING:
      • Stainless Steel
      • Aluminum
      • Nickel
    • ACTUATOR:
      • Stainless Steel
      • Aluminum
      • Nickel
      • Polycarbonate
    • BASE: Polyamide 6/6
    • SEALING: Silicone Rubber
    • INNER ASSEMBLY:
      • Polycarbonate
      • Polyoxymethylene
      • Stainless Steel
      • Brass
    • SPRING: Stainless Steel
    • CONTACT: Silver Alloy
    • TERMINALS: Brass
    • HARDWARE: Nickel Plated Brass

    PV8 Series Illuminated, Sealed Anti-vandal Switches

    View product page link View datasheet link

    PV8 series anti vandal switches feature a long life expectancy and are water resistant. Illumination LED colors include red, yellow, orange, blue, green and white. Dot or ring illumination options are available. 25mm panel cutout size.

    This anti-vandal switch is available with 2 or 4 poles, and offers momentary or maintained options.

    Applications include elevator and kiosks, among other designs that require vandal resistance.

    SPECIFICATIONS

    • RATING: 2A 48VDC
    • ILLUMINATION BASE RATING:
      • Red, Yellow and Orange: 20mA 1.8V
      • Blue, Green and White: 20mA 2.8V
    • TEMPERATURE: -20°C to 55°C
    • MECHANICAL LIFE: 1,000,000 Cycles
    • ELECTRICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max.
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 2,000VAC
    • INGRESS PROTECTION: IP65
    • PANEL CUTOUT: 25mm Diameter

    MATERIALS

    • BUSHING:
      • Stainless Steel
      • Aluminum
      • Nickel
    • ACTUATOR:
      • Stainless Steel
      • Aluminum
      • Nickel
      • Polycarbonate
    • BASE: Polyamide 6/6
    • SEALING: Silicone Rubber
    • INNER ASSEMBLY:
      • Polycarbonate
      • Polyoxymethylene
      • Stainless Steel
      • Brass
    • SPRING: Stainless Steel
    • CONTACT: Silver Alloy
    • TERMINALS: Brass
    • HARDWARE: Nickel Plated Brass

    KO Series Keylock Switches

    View product page link View datasheet link

    KO series keylock switches provide a variety of size and product package options for your application. You can choose between barrel or flat key options, key code options, and more. Dozens of types and sizes of keylock switches are available.

    These keylock switches work great for security applications, personal transportation vehicles, or elevator/kiosk controls.

    SPECIFICATIONS

    • CONTACT RATING: As Per Individual Model Number
    • INITIAL CONTACT RESISTANCE: 10mΩ Max.
    • INSULATION RESISTANCE: As Per Individual Model Number
    • DIELECTRIC STRENGTH: As Per Individual Model Number

    MATERIALS

    • HOUSING AND CYLINDER:
      • Die Cast Zinc Alloy
      • Finish Dependent Upon Individual Model Number
    • CONTACT: Silver Plated Copper Alloy
    • KEYS: As Per Individual Model Number

    KC Series Rotary Switches

    View product page link View datasheet link

    The KC Series Rotary switches combine a proven reliable design in an industry standard package at a very competitive price.

    There are dozens of different models, please see the PDF data sheet for specific information. The models are SP, DP, 3P and 4P. Some come standard with stops, some come without stops. Up to 12 positions. PC Pin or Solder Lug termination options. Many different actuator lengths.

    SPECIFICATIONS

    • LIFE EXPECTANCY: 10,000 Cycles Typical
    • RATINGS: 300mA 125VAC, 150mA 250VAC
    • CONTACT RESISTANCE: 50mΩ Inital 2-4VDC, 100mA
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 500V RMS Max. at Sea Level
    • OPERATING FORCE: .8 ± .3kg-cm

    MATERIALS

    • HOUSING, BASE, SHAFT: Glass Filled Nylon
    • MOVING AND FIXED CONTACT: Silver Plated Copper Alloy
      • Gold Flash Over Silver Plate
    • HARDWARE: Nut-Zinc, Nickel Plated
      • Lockwasher-Steel, Zinc Plated
      • Stop Ring-Brass, Nickel Plated

    PP1 Series Push Pull Pushbutton Switches

    View product page link View datasheet link

    The PP1 series pushbutton / detector switch features a push pull function and various terminal options. This switch has high ratings with UL approvals, up to 16A with 1HP. The PP1 series push-pull switch acts as a door-interlock switch or detector switch. It has a very high tolerance for activation, and the ability to include push and pull activation for manual maintenance.

    This switch is available with either a short or long body, and fits a panel cutout size of 36.5mm x 13.5mm.

    This door interlock switch is used in a variety of applications including slot machines, kiosk and gaming equipment, where a technician can come and service the machine, pushing or pulling the switch as needed to power on or off the unit. It can also be found in appliances, HVAC and security devices.

    SPECIFICATIONS

    • ELECTRICAL RATING:
      • 16A 125VAC [cULus]
      • 12A 250VAC [cULus]
      • 1HP 125/250VAC [cULus]
    • TEMPERATURE: 0°C to 85°C
    • ELECTRICAL LIFE: 6,000 Cycles [cULus]
    • CONTACT RESISTANCE: 50mΩ Max.

    MATERIALS

    • BODY: Polyamide 6/6
    • ACTUATOR: Polyamide 6/6
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Brass

    PP2 Series Push Pull Pushbutton Switches

    View product page link View datasheet link

    The PP2 series push button | detector switch is a power rated push-pull switch with momentary functions. There are various actuator and terminal options, with high ratings and UL approvals at 16A and 1HP.

    Both short and long bodies are available with the PP2 series push pull door interlock switch. It has the ability to include both push and pull activation for manual maintenance.

    This push pull switch acts as a door interlock switch, and can be used in a variety of applications where a service technician needs to be able to turn on and off the machine while the technician is working on the back panel (such as a kiosk, slot machine, or other gaming equipment). It also can be found in commercial appliances, HVAC equipment and security devices.

    SPECIFICATIONS

    • ELECTRICAL RATING OPTION 1:
      • 10R(4)A 277VAC 5E4 [UL]
    • ELECTRICAL RATING OPTION 7:
      • 16A 125VAC [cURus]
      • 12A 250VAC [cURus]
      • 1HP 125/250VAC [cURus]
    • ELECTRICAL LIFE: 6,000 Cycles
    • MECHANICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 10mΩ Max.
    • INSULATION RESISTANCE: 10mΩ Max.
    • OPERATING TEMPERATURE: 0°C to 85°C
    • PANEL CUTOUT: 13.5mm x 36mm
    • FUNCTION: DPDT, On-On or On1-On2-(On1)

    PB1973 Series Snap in, Illuminated, Panel Mount Pushbutton

    View product page link View datasheet link

    These rectangular illuminated panel mount pushbutton switches come in many colors. Great for telecommunications, performance audio, external hard drives and modems, networking, computers, servers, instrumentation and low power on/off designs.

    SPECIFICATIONS

    • CONTACT RATING:
      • 15A 250VAC UL Listed
      • 10A 250VAC VDE Listed
    • MECHANICAL LIFE: ≥30,000 Cycles
    • ELECTRICAL LIFE: ≥10,000 Cycles
    • CONTACT RESISTANCE: <20mΩ
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: >1,500V
    • OPERATING TEMPERATURE: -10°C to 55°C

    MATERIALS

    • HOUSING: Nylon
    • ACTUATOR: Polycarbonate
    • MOVING CONTACTS: Silver Alloy
    • TERMINALS: Brass, Silver Plated

    D16 Series Illuminated Pushbutton Switches

    View product page link View datasheet link

    These illuminated pushbutton switches are available in solder lug types. The P16 ones are available in sockets and the L16 have pilot indicators. They come in up to 4 poles, have latching and momentary functions, and round, square or rectangular pushbutton heads. Neon, incandescent and LED lamps available.

    Applications include low power on/off designs, telecommunications, networking, computers/servers, performance audio, external hard drives and modems, and instrumentation.

    SPECIFICATIONS

    • RATING:
      • 5A 250VAC
      • 8A 125VAC
      • 6A 24VDC
    • MECHANICAL LIFE: 100,000 Cycles
    • ELECTRICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max. Typical; Initial at 2-4VDC
    • INSULATION RESISTANCE: >1,000MΩ
    • DIELECTRIC STRENGTH:
      • >1,500V for 1 Minute
      • >3,000V Between Poles
    • OPERATING FORCE: 300g/pole
    • OPERATING TEMPERATURE: -20°C to 55°C
    • SAFETY STANDARD AND APPROVALS: D16: UL, CSA, VDE, Semko, Nemko, Demko, Fimko

    MATERIALS

    • SWITCH HOUSING: Polyetherimide (PEI)
    • CONTACT HOUSING: Diallyl Phthalate (DAP)
    • LENS: Polycarbonate (PC)
    • CONTACTS: Silver Plated Copper Alloy
    • TERMINALS: Silver Plated Copper Alloy

    RP3508 Series Round, Illuminated Pushbutton

    View product page link View datasheet link

    The RP3508 is a panel mount pushbutton switch that comes with green, red or yellow LED options. The applications for this round pushbutton switch include telecommunications, networking, computers and servers, performance audio, instrumentation, low power on/off designs and external hard drives/modems.

    SPECIFICATIONS

    • CONTACT RATING:
      • 3A 125VAC
      • 1.5A 250VAC
    • MECHANICAL LIFE: ≥20,000 Cycles
    • ELECTRICAL LIFE: ≥6,000 Cycles
    • INSULATION RESISTANCE: >1,000MΩ
    • DIELECTRIC STRENGTH: >1,500V for 1 Minute
    • OPERATING TEMPERATURE: 0°C to 65°C
    • STORAGE TEMPERATURE: -25°C to 85°C

    MATERIALS

    • SWITCH HOUSING: UL94-HB
    • TERMINALS: Solder Lug, Silver-Plated

    PA4 Series Illuminated, Power Pushbutton Switches

    View product page link View datasheet link

    PA4 series power pushbutton switch is durable, robust and economical. Featuring the popular 13mm x 19mm cutout and high power ratings, both standard and water resistant versions and illuminations options.

    SPECIFICATIONS

    • RATING OPTION C:
      • 16A 125/250VAC [UR, cUR, CSA]
      • 16(4)A 250V~ 1E4 T125/55 [ENEC]
    • RATING OPTION J:
      • 16A 125/250VAC [UR, cUR, CSA]
      • 16(8)A 250V~ 1E4 T125/55 [ENEC]
    • TEMPERATURE:
      • -20°C to 65°C [UR, cUR, CSA]
      • -20°C to 125°C [ENEC]
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 20mΩ Min. at 1A 5VDC
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,000VAC for 1 Minute

    MATERIALS

    • UPPER BODY: Polyamide 6/6, UL94 V-2
    • LOWER BODY: PBT, UL94 V-2
    • ACTUATOR:
      • Polyamide 6/6, UL94 V-2
      • Polycarbonate, UL94 V-2
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Copper

    LA Series Process Sealed, Illuminated Pushbutton Switches

    View product page link View datasheet link

    The LA series illuminated pushbutton switches have an IP65 rating. Come in up to 4 poles and a variety of color options.

    Now available in a Flush Mount configuration - with an appealing aluminum bezel.

    These work great for the telecommunications, networking, computers, instrumentation, performance audio and external hard drive industries.

    SPECIFICATIONS

    • RATING:
      • 5A 250VAC
      • 8A 125VAC
      • 2A 250VDC
      • 6A 24VDC
    • MECHANICAL LIFE: ≥100,000 Cycles
    • ELECTRICAL LIFE: ≥50,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max. Typical, Initial at 2-4VDC
    • INSULATION RESISTANCE: >1,000MΩ
    • DIELECTRIC STRENGTH:
      • >1,500V for 1 Minute
      • >3,000V Between Poles
    • ACTUATION FORCE: 300g/pole
    • OPERATING TEMPERATURE: -20°C to 55°C
    • DEGREE OF PROTECTION: IP65

    MATERIALS

    • SWITCH HOUSING: Polyethermide (PEI)
    • CONTACT HOUSING: Diallyl Phthalate (DAP)
    • ACTUATOR RING: Polycarbonate (PC)
    • LENS: Polycarbonate (PC)
    • CONTACTS: Silver Plated Copper Alloy
    • TERMINALS: Silver or Gold Plated Copper Alloy

    RP8100 Series Round, Illuminated Pushbutton

    View product page link View datasheet link

    E-Switch introduces their newest illuminated pushbutton switch, the RP8100! Offered in a sleek, round design, you can get it in a threaded or snap-in panel mount version. There are 5 LED color options for the illumination, or you can get it without illumination. Sealed with an IP65 rating, this switch is great for audio/visual, telecommunications, appliance, instrumentation and consumer electronics markets, to name a few.

    SPECIFICATIONS

    • CONTACT RATING: 125mA 125VAC; 100mA 50VDC
    • LIFE EXPECTANCY: 500,000 Cycles at Full Load
    • CONTACT RESISTANCE: 50mΩ Max. (Initial)
    • INSULATION RESISTANCE: 1,000MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,000VAC RMS
    • OPERATING FORCE: 350gf ± 150gf
    • OPERATING TEMPERATURE: -30°C to 85°C
    • CONTACT BOUNCE: 10ms Max.
    • TRAVEL: 1.5mm ± .25mm

    MATERIALS

    • HOUSING: Nylon
    • BUTTON: Nylon
    • TERMINAL CASE: Thermo Plastic
    • TERMINALS: Copper Alloy, Plated
    • CONTACT: Copper Alloy, Plated

    700 Series Snap-Acting, Panel Mount Push Button Switches

    View product page link View datasheet link

    The 700 series push button switches have a snap-in panel mount option (see the data sheet on the left for more information). Has a snap acting contact design and multiple termination options.

    Applications and markets include telecommunications, networking, computers/servers, performance audio, instrumentation, low power on/off designs and more.

    SPECIFICATIONS

    • RATINGS:
      • 1A 250VAC
      • 3A 120VAC or 28VDC
    • ELECTRICAL LIFE: 50,000 Cycles Typical
    • CONTACT RESISTANCE:
      • 10mΩ Max. Typical at 2-4VDC
      • 100mA For Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING FORCE: 200gf ± 50gf
    • OPERATING TEMP: -30°C to 85°C

    MATERIALS

    • CASE: Diallyl Phthalate (DAP)
    • PLUNGER: Glass Filled Nylon or Glass Filled Polyester
    • BUSHING: Nickel Plated Brass
    • HOUSING: Stainless Steel
    • CONTACTS: Silver or Gold Plated Copper Alloy

    LP1 Series Illuminated, Round Pushbutton with Multiple Color Options

    View product page link View datasheet link

    This latest round pushbutton switch is a panel mount illuminated LED switch. Available with multiple illumination color options with a momentary pushbutton function.

    Markets for this switch include computer servers/peripherals, performance audio, instrumentation, telecommunications, networking and more.

    SPECIFICATIONS

    • CONTACT RATING: 100mA 30VDC
    • ELECTRICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Inital Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 500VAC
    • FORCE: 250gf ± 100gf
    • TRAVEL: 1.8mm ± 0.3mm
    • OPERATING TEMPERATURE: -40°C to 85°C
    • STORAGE TEMPERATURE: -40°C to 85°C

    PR1 Series Round, Illuminated, Power Pushbutton Switches

    View product page link View datasheet link

    The PR1 series pushbutton switch is a high rated switch with UL and VDE approvals. Features maintained and momentary options and a PVC cap for water and dust protection.

    SPECIFICATIONS

    • RATING:
      • Rating Option C:
        • 16A 125VAC [UL, cUL]
        • 3/4HP 250VAC [UL, cUL]
        • 16(6)A 250V~ 1E4 T125 [VDE]
        • 10(4)A 250V~ 5E4 T125 [VDE]
    • TEMPERATURE:
      • -20°C to 105°C [UL, cUL]
      • -20°C to 125°C [VDE]
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 35mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
    • INGRESS PROTECTION: IP54 with PVC Cap

    MATERIALS

    • BODY: Polyamide 6/6, UL94 V-2
    • ACTUATOR:
      • Polyamide 6/6, UL94 V-2
      • Polycarbonate, UL94 V-2
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Brass

    ULP Series Illuminated Pushbutton

    View product page link View datasheet link

    The ULP series lighted push-button switches provide a positive tactile response and many color options are available. The applications for these switches include telecommunications, external hard drives and modems, instrumentation, performance audio, computers/servers, networking and low power on/off designs.

    SPECIFICATIONS

    • CONTACT RATING:
      • Gold, 0.4VA Max. at 28V (AC or DC)
      • Silver, 0.5A at 25VDC; 0.2A at 250VAC
    • MECHANICAL LIFE: 1,000,000 Cycles
    • ELECTRICAL LIFE:
      • 200,000 Cycles Silver
      • 200,000 Cycles Gold
    • CONTACT RESISTANCE: 50mΩ Silver, 100mΩ Gold
    • INSULATION RESISTANCE: >100MΩ at 500VDC
    • DIELECTRIC STRENGTH: 1000VAC for 1 Minute
    • OPERATING FORCE:
      • 200gf ± 100gf SPDT
      • 300gf ± 150gf DPDT
    • OPERATING TEMPERATURE: -20°C to 70°C

    PB2 Series Illuminated, Power Pushbutton Switches

    View product page link View datasheet link

    PB2 series push button switch has a popular 22mm x 30mm cutout, and high power ratings up to 20A. Internal O-rings for water resistance, and illumination options are available.

    SPECIFICATIONS

    • RATINGS:
      • 20A 125VAC [cULus UL508]
      • 250VAC [cULus UL508]
    • TEMPERATURE: 0°C to 85°C
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max.
    • INSULATION RESISTANCE: 5MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
    • INGRESS PROTECTION: IP54

    MATERIALS

    • BODY: Polyamide 6/6
    • BEZEL: Polyamide 6/6
    • LENS: Polycarbonate
    • GASKET: Polyvinyl Chloride
    • CONTACTS: Silver Plated Copper
    • TERMINALS: Silver Plated Brass
    • O-RING: Silicone

    ST-1 Series High Amp Toggle Switches

    View product page link View datasheet link

    ST1 series high amp toggle switches feature heavy rating with UL approvals and a rubber boot for water and dust protection.

    SPECIFICATIONS

    • RATING:
      • Maintained Switches:
        • 20A 125VAC [cULus]
        • 15A 250VAC [cULus]
        • 2HP 125-250VAC [cULus]
      • Momentary Switches:
        • 20A 125VAC [cULus]
        • 15A 250VAC [cULus]
        • 1.5HP 125-250VAC [cULus]
    • TEMPERATURE: -20°C to 85°C
    • ELECTRICAL LIFE: 6,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max.
    • INSULATION RESISTANCE: 800MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute

    MATERIALS

    • BODY: Phenolic, UL94 V-0
    • ACTUATOR: Nickel Plated Brass
    • BUSHING: Nickel Plated Brass
    • HOUSING: Stainless Steel
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Brass

    ST-2 Series Power Toggle Switches

    View product page link View datasheet link

    ST2 series toggle switches have a heavy duty rating with UL approvals, and a rubber boot for water and dust protection. Tab, screw and solder terminal options.

    SPECIFICATIONS

    • RATING:
      • Maintained Switches:
        • 20A 125VAC [cULus]
        • 15A 250VAC [cULus]
        • 2HP 125-250VAC [cULus]
      • Momentary Switches:
        • 20A 125VAC [cULus]
        • 15A 250VAC [cULus]
        • 1.5HP 125-250VAC [cULus]
    • TEMPERATURE: -20°C to 85°C
    • ELECTRICAL LIFE: 6,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Max.
    • INSULATION RESISTANCE: 800MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute

    MATERIALS

    • BODY: Phenolic, UL94 V-0
    • ACTUATOR: Nickel Plated Brass
    • BUSHING: Nickel Plated Brass
    • HOUSING: Stainless Steel
    • CONTACTS: Silver Alloy
    • TERMINALS: Silver Plated Brass

    800 Series Sub-Miniature Pushbutton Switches

    View product page link View datasheet link

    The 800 series subminiature pushbutton switches have a snap-in panel mount option and butt contact design. They come in a variety of termination options and work great in the telecommunications, networking, computers, performance audio, instrumentation and low power on/off design applications.

    SPECIFICATIONS

    • RATINGS:
      • 1A 250VAC
      • 3A 120VAC or 28VDC
    • ELECTRICAL LIFE: 50,000 Cycles Typical
    • CONTACT RESISTANCE:
      • 10mΩ Max. Typical at 2-4VDC
      • 100mA For Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING FORCE: 200gf ± 50gf
    • OPERATING TEMP: -30°C to 85°C

    MATERIALS

    • CASE: Diallyl Phthalate (DAP)
    • PLUNGER: Glass Filled Nylon or Glass Filled Polyester
    • BUSHING: Nickel Plated Brass
    • HOUSING: Stainless Steel
    • CONTACTS: Silver or Gold Plated Copper Alloy

    200 Series Sub-Miniature Toggle Switches

    View product page link View datasheet link

    The 200 Series sub-miniature toggle switches are offered in both SPDT and DPDT. These switches come with a variety of switching functions and bushing options. Eight different termination options are available.

    Applications include telecommunications, instrumentation, networking, and medical equipment devices.

    SPECIFICATIONS

    • CONTACT RATING: Dependent on Contact Material
    • MECHANICAL LIFE: 30,000 Make-and-Break Cycles
    • ELECTRICAL LIFE: 6,000 at Full Power
    • CONTACT RESISTANCE: 10mΩ Max. Initial for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • CONTACTS: Silver or Gold Plated Copper Alloy

    100A Series Sealed Miniature Toggle Switches

    View product page link View datasheet link

    The 100A Series miniature toggle switches are sealed to IP-67 standards.

    Applications include telecommunications, instrumentation, networking and medical equipment devices.

    SPECIFICATIONS

    • CONTACT RATING: Dependent on Contact Material
    • MECHANICAL LIFE: 30,000 Make-and-Break Cycles
    • ELECTRICAL LIFE: 6,000 at Max. Power
    • CONTACT RESISTANCE: 10mΩ Max. Initial for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • CONTACTS: Silver or Gold Plated

    100 Series Miniature Toggle Switches

    View product page link View datasheet link

    The 100 Series miniature toggle switches offer numerous actuator options and termination options including right angle PC mount. These toggle switches offer up to 4 poles. They are PCB mounted and are available in through whole or right angle termination.

    NOW available with a locking toggle!!!!!! See the K1 and K2 actuator options on the PDF data sheet.

    Applications include telecommunications, instrumentation, networking and medical equipment.

    SPECIFICATIONS

    • CONTACT RATING: Dependent on Contact Material
    • MECHANICAL LIFE: 40,000 Make-and-Break Cycles
    • ELECTRICAL LIFE: 6,000 at Full Power
    • CONTACT RESISTANCE: 10mΩ Max. Initial
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C
    • TORQUE: Max. 5kg·cm (70 ounce·inch)

    MATERIALS

    • CONTACTS/TERMINALS: Silver or Gold Plated Copper Alloy

    700C Series Alternate Action, Miniature Pushbutton Switch

    View product page link View datasheet link

    These alternative action pushbutton switches with a push-on push-off design have a snap acting contact design and a snap-in panel mount option. With multiple termination and bushing options, you will be able to find the one right for you. Great for telecommunications, performance audio, networking, computers, instrumentation and low power on/off designs.

    SPECIFICATIONS

    • CONTACT RATING:
      • Gold, 0.4VA Max. 20V (AC or DC) Max.
      • Silver, 3A 120VAC or 28VDC, 1A 250VAC
    • LIFE EXPECTANCY: 50,000 Cycles
    • CONTACT RESISTANCE: 20mΩ
    • INSULATION RESISTANCE: 1,000MΩ
    • DIELECTRIC STRENGTH: 1,000V RMS
    • OPERATING FORCE:
      • SP7, 400 +/- 150g
      • DP7, 600 +/- 150g
    • OPERATING TEMPERATURE: -30°C to 85°C
    • TRAVEL: 3.0mm

    MATERIALS

    • CASE: DAP, UL94V0
    • ACTUATOR: Nylon, UL94V0
    • FRAME: Stainless Steel
    • CONTACTS: Brass, Silver or Gold Plated
    • TERMINALS: Silver or Gold Plated Copper Alloy

    700A Series IP-67 Sealed Pushbutton Switches

    View product page link View datasheet link

    This sealed pushbutton switch has a snap acting contact design and comes with multiple termination options. Sealed to IP67 specs. Great for applications in telecommunications, networking, computers/servers, performance audio, instrumentation and more.

    SPECIFICATIONS

    • CONTACT RATING:
      • Gold - 0.4VA 20V (AC or DC) Max.
      • Silver - 3A 120VAC or 28VDC, 1A 250VAC
    • LIFE EXPECTANCY: 50,000 Cycles
    • CONTACT RESISTANCE: 20mΩ
    • INSULATION RESISTANCE: 1000MΩ
    • DIELECTRIC STRENGTH: 1500V RMS
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • HOUSING: Nylon, UL94V0
    • ACTUATOR: Nylon, UL94V0
    • CONTACTS: Brass, Silver or Gold Plated
    • TERMINALS: Silver or Gold Plated Copper Alloy

    LP16 Series Long Life, Illuminated Pushbutton Switch

    View product page link View datasheet link

    The LP16 series illuminated pushbutton switch series has many features. Its' long life of 50,000,000 cycles is realized by the help of magnets. There are two cap sizes - 12.2mm and 14.6mm square, and there are quite a few illumination options. You can choose the cap color, LED color options, and/or a diffuser color.

    This illuminated pushbutton switch also has a long travel of 3.3mm.

    The markets for this pushbutton switch include the audio/visual market, instrumentation, telecommunication, networking and computer peripheral market.

    SPECIFICATIONS

    • CONTACT RATING: 100mA, 20VDC
    • LIFE EXPECTANCY: 50,000,000 Cycles
    • CONTACT RESISTANCE: 150mΩ Max. Initial
    • INSULATION RESISTANCE: 10MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 500VAC for 1 Minute
    • OPERATING FORCE: 250 gf ± 50gf
    • OPERATING TEMPERATURE: -5°C to 60°C
    • TOTAL TRAVEL: 3.3mm ± 0.3mm
    • FUNCTION: SPST, Off-(On)

    LP11 Series Illuminated Pushbutton with Multiple LED Color Options

    View product page link View datasheet link

    This latest Illuminated pushbutton switch from E-Switch, the LP11, has many options. You can get it with a tactile or non-tactile feel. Also it has multiple cap sizes and LED color combinations.

    Applications for the LP11 include computer servers, peripherals, performance audio, instrumentation, telecommunications/networking and more.

    SPECIFICATIONS

    • CONTACT RATING: 100mA 12VDC - SPST
    • ELECTRICAL LIFE: 1,000,000 Cycles
    • CONTACT RESISTANCE: 200mΩ Inital Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 500VAC
    • FORCE: 250gf ± 100gf
    • TRAVEL: 4.50 ± 0.2mm
    • OPERATING TEMPERATURE: -20°C to 70°C
    • STORAGE TEMPERATURE: -20°C to 70°C

    LP6 Series Illuminated Pushbutton with Multiple LED Color Options

    View product page link View datasheet link

    This latest illuminated pushbutton design features a sculptured square cap with either an SPST or DPST circuit. Multiple LED color options.

    Applications include computer servers/peripherals, performance audio, instrumentation, telecommunications/networking and more.

    SPECIFICATIONS

    • CONTACT RATING: 12mA 12VDC Both SPST and DPST
    • ELECTRICAL LIFE: 200,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Initial Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 500VAC
    • OPERATING FORCE: 150gf ± 100gf for SPST, 200gf ± 100gf for DPST
    • TRAVEL: 2.20 ± 0.2mm
    • OPERATING TEMPERATURE: -20°C to 70°C
    • STORAGE TEMPERATURE: -20°C to 70°C

    TL1250 Series Illuminated Right Angle Tact Switch

    View product page link View datasheet link

    The TL1250 is an illuminated, right angle tact switch with a sharp, tactile response. Single color LED options in blue, red, green and yellow are available for the TL1250 tactile switch.

    Markets for the TL1250 illuminated tact switch include telecommunications, consumer electronics, audio/visual, medical, computers, peripherals and more.

    SPECIFICATIONS

    • CONTACT RATING: 12VDC 50mA
    • MECHANICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 100mΩ at 5VDC Initial Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 100V
    • DIELECTRIC STRENGTH: 250VAC
    • FORCE: 120 ± 60gf; 180 ± 60gf; 280 ± 70gf
    • TRAVEL: 0.25mm ± 0.1mm
    • BOUNCE: 5m Second Max.
    • OPERATING TEMPERATURE: -20°C to 70°C

    LP4 Series Illuminated Pushbutton Switch

    View product page link View datasheet link

    The latest illuminated pushbutton switch offered by E-Switch comes in either latching or momentary function and right angle or verticle PC mount options. There are multiple bezel and button designs to choose from, and six LED options.

    Markets for the LP4 illuminated pushbutton switch include telecommunications, consumer electronics, audio/visual, medical, testing/instrumentation, computer/peripherals.

    SPECIFICATIONS

    • CONTACT RATING: 30VDC, 0.1A
    • MECHANICAL LIFE: 50,000 Cycles
    • CONTACT RESISTANCE: 50mΩ Initial Max
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 500VAC
    • OPERATING FORCE: 250gf ± 100gf
    • TRAVEL: 1.0mm ± 0.3mm Latching; 1.5mm ± 0.3mm Full
    • OPERATING TEMPERATURE: -20°C to 70°C

    TL1240 Series Illuminated Tact Switches

    View product page link View datasheet link

    The TL1240 Series illuminated tact switch offers multiple LED options, reliable dome technology, independent LED leads, multiple cap options and LED color matching upon request.

    Applications can be found in the consumer electronics and telecommunications markets, along with medical devices, computer/peripherals, and testing/instrumentation.

    SPECIFICATIONS

    • RATING: 50mA 12VDC
    • MECHANICAL LIFE: 100,000 Cycles
    • CONTACT RESISTANCE: 100mΩ (Max.) Typical, Initial at 2-4VDC
    • INSULATION RESISTANCE: 100MΩ (Min.)
    • OPERATING FORCE: 160gf ± 50gf
    • OPERATING TEMP: -20°C to 70°C
    • TRAVEL: 0.25 +0.2 / -0.1mm

    TL1220 Series Illuminated Multi-Option Tact Switch

    View product page link View datasheet link

    The TL1220 is an illuminated tactile switch with multiple cap options. Single color LED options are available. Markets for the TL1220 Illuminated tact switch include telecommunications, consumer electronics, audio/visual, medical and computer/servers.

    SPECIFICATIONS

    • CONTACT RATING: 12VDC 50mA
    • MECHANICAL LIFE: 500,000 Cycles
    • CONTACT RESISTANCE (Initial Max.): 100mΩ at 1.5VDC; 100mA
    • INSULATION RESISTANCE (Min. at 500V): 100MΩ
    • DIELECTRIC STRENGTH (1 Minute): 500VAC
    • FORCE: 180gf ± 50gf
    • OPERATING TEMPERATURE: -20°C to 70°C
    • TRAVEL: 0.2mm ± 0.1mm
    • BOUNCE: 10m Second Max.

    LP2 Series Illuminated Pushbutton Switch

    View product page link View datasheet link

    The new LP2 series illuminated pushbutton switch features multiple LED colors, custom marking options on the caps, and different cap sizes. The LED colors feature red, blue, green, yellow, white and none. You can choose from six different button colors, as well: black, red, white, gray, transparent red, and transparent blue. You can choose your graphic or customize the graphic for the button.

    The markets and applications for the LP2 series illuminated pushbutton switch include audio/visual, consumer electronics, telecommunications, medical, testing/instrumentation, computer servers and more.

    SPECIFICATIONS

    • CONTACT RATING: 20VDC 1mA; 5VDC 5mA
    • OPERATING LIFE: 300,000 Cycles
    • CONTACT RESISTANCE (Initial Max): 200Ω Max. at 5VDC, 1mA
    • CONTACT ARRANGEMENT: SPST, Normally Open
    • INSULATION RESISTANCE: 100MΩ Min. at 100VDC
    • DIELECTRIC STRENGTH (1 min.): 250VAC
    • OPERATING FORCE: 125gf ± 35gf
    • TRAVEL: 1.3mm ± 0.3mm
    • OPERATING/STORAGE TEMPERATURE: -20°C to 70°C

    LP15 Series Illuminated Pushbutton Switch

    View product page link View datasheet link

    The new LP15 series illuminated pushbutton switch features multiple LED colors, custom marking options on the caps, and different cap sizes. The LED colors feature red, blue, green, yellow, white and none. You can choose from four different button colors, as well: black, red, white, and transparent. You can choose your graphic or customize the graphic for the button.

    The markets and applications for the LP15 series illuminated pushbutton switch include audio/visual, consumer electronics, telecommunications, medical, testing/instrumentation, computer servers and more.

    SPECIFICATIONS

    • CONTACT RATING: 1mA 20VDC
    • OPERATING LIFE: 300,000 Cycles
    • CONTACT RESISTANCE (Initial Max): 200Ω Max. at 5VDC, 1.5mA
    • CONTACT ARRANGEMENT: SPST, Normally Open
    • DIELECTRIC STRENGTH (1 Min.): 250VAC
    • FORCE: 125gf ± 35gf
    • TRAVEL: 1.3mm ± 0.3mm
    • OPERATING/STORAGE TEMPERATURE: -20°C to 70°C

    LP37 Series Illuminated, Right Angle Pushbutton Switch

    View product page link View datasheet link

    The new LP37 series illuminated pushbutton switch features multiple LED colors and a right angle termination. The LED colors feature red, green, yellow. The right angle design provides a unique long travel.

    The markets and applications for the LP37 series illuminated pushbutton switch include audio/visual, consumer electronics, telecommunications, medical, testing/instrumentation, computer servers and more.

    SPECIFICATIONS

    • CONTACT RATING: 20mVDC to 50VDC; 10mA to 250mA
    • OPERATING LIFE: 30,000 Cycles
    • CONTACT RESISTANCE (Initial Max): 50mΩ Max.
    • CONTACT ARRANGEMENT: SPDT
    • INSULATION RESISTANCE: 1,000MΩ Min. at 100VDC
    • DIELECTRIC STRENGTH (1 min.): 250VAC
    • OPERATING FORCE: 250gf ± 100gf
    • TRAVEL: Full: 5.1mm ± 0.5mm; Switching: 2.95mm Nom.; Latching: 3.3mm Nom.
    • OPERATING/STORAGE TEMPERATURE: -30°C to 85°C

    TL3200 Series SMT Tact Switch

    View product page link View datasheet link

    The TL3200 illuminated tact switch has a dual LED SMT design. Sub-miniature -- measures only 4.5mm x 6.8mm x 2mm. Single or dual color options available.

    Used in telecommunications equipment, computer/servers/peripherals, testing and instrumentation, medical devices, audio/visual and consumer electronics applications.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 30,000 Cycles
    • CONTACT RESISTANCE: 500mΩ
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 160gf +75/-30gf
    • OPERATING TEMP: -25°C to 85°C
    • TRAVEL: 0.25mm +0.2/-0.1mm

    TL1100 Series Tact Switches

    View product page link View datasheet link

    The TL1100 12mm x 12mm thru hole tactile switch offers reliable dome contact technology with strong tactile/audible feedback. Its multiple operating force options allows it to be applied to many industries: telecommunications, consumer electronics, medical, testing/instrumentation, computer/servers/peripherals and audio/visual.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 100,000 Cycles
    • CONTACT RESISTANCE:
      • 100mΩ Max. Typical at 2-4VDC
      • 100mA for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 160gf ± 50gf; 260gf ± 50gf
    • OPERATING TEMPERATURE: -20°C to 70°C

    MATERIALS

    • HOUSING: Polybutylene Terephthalate (PBT)
    • ACTUATOR: Polybutylene Terephthalate (PBT)
    • COVER: Polyester
    • CONTACTS: Silver Plated Phosphor Bronze
    • TERMINALS: Silver Plated Copper Alloy

    TL1105 Series Tact Switches

    View product page link View datasheet link

    The TL1105 series 6mm x 6mm tactile switch comes with a right angle option, many actuator lengths and multiple operating forces. The TL1105 tact switch features reliable dome contact technology, and a strong tactile feedback.

    Applications for this through hole tact switch include telecommunications, consumer electronics, audio/visual, medical device, testing/instrumentation, computer peripherals and more.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 100,000 Cycles
    • CONTACT RESISTANCE:
      • 100mΩ Max. Typical at 2-4VDC
      • 100mA for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 100MΩ Min. at 100VDC for 1 Minute
    • DIELECTRIC STRENGTH: 250VAC
    • OPERATING FORCE: 100gf ± 50gf; 160gf ± 50gf; 250gf ± 50gf
    • OPERATING TEMP: -20°C to 70°C
    • BOUNCE: <10m Second

    MATERIALS

    • HOUSING: 6/6 Nylon
    • ACTUATOR: 6/6 Nylon or Acetal
    • COVER: Polyester
    • CONTACTS: Silver or Gold Plated Bronze
    • TERMINALS: Silver or Gold Plated Brass

    TL6100 Series Sealed Tact Switch

    View product page link View datasheet link

    Introducing the new TL6100 series of tactile switches that are process sealed to prevent contamination of the switch contacts during wave soldering or water-wash processes. Designed for through-hole mounting on a circuit board, the switches are ideal for computer keyboards, personal digital assistants,video games, cell phones, appliances and electronic instrumentation. Available with either a phosphor bronze dome or a stainless steel dome, the TL6100 series features a life expectancy of 80,000 cycles minimum.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 50VDC
    • LIFE EXPECTANCY: 80,000 Cycles
    • CONTACT RESISTANCE:
      • 50mΩ Max, Typical at 5VDC
      • 100mA for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 10,000MΩ Min.
    • DIELECTRIC STRENGTH: 300VAC
    • ACTUATION FORCE: 130gf ± 50gf; 160gf ± 50gf; 300gf ± 50gf; 500gf ± 100gf
    • OPERATING TEMP: -40°C to 85°C

    TL6190 Series Right Angle Sealed Thru-Hole Tactile Switch

    View product page link View datasheet link

    E-Switch introduces the NEW TL6190 - a process sealed right angle thru-hole tactile switch. With reliable dome technology and multiple operating forces to choose from, it works great in the telecommunications, consumer electronics, audio/visual and computer/peripheral markets.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • MECHANICAL LIFE: 100,000 Cycles
    • ELECTRICAL LIFE: 100,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Initial Max.
    • INSULATION RESISTANCE: 100MΩ Min. at 100V
    • DIELECTRIC STRENGTH: 500VDC
    • FORCE: 160gf ± 60gf; 220gf ± 60gf; 320gf ± 60gf
    • TRAVEL: 0.50 ± 0.20mm
    • OPERATING/STORAGE TEMP (Switch): -40°C to 105°C
    • OPERATING/STORAGE TEMP (Button): -40°C to 85°C

    TL2201 and TL4201 Series Sub-miniature Pushbutton Switches

    View product page link View datasheet link

    These subminiature pushbutton switches come in a variety of styles and a variety of actuator and cap options. The applications for these switches include telecommunications, networking, computers/servers, performance audio, instrumentation and more.

    SPECIFICATIONS

    • LIFE EXPECTANCY: 10,000 Cycles
    • CONTACT RATING: 100mA 30VDC
    • CONTACT RESISTANCE: 100mΩ Max.
    • INSULATION RESISTANCE: >100MΩ Min.
    • DIELECTRIC STRENGTH: 500VAC
    • OPERATING FORCE: See Individual Model
    • TRAVEL: See Individual Model

    PBH Series Miniature Pushbutton Switch

    View product page link View datasheet link

    PBH series miniature pushbutton switches that an ultra light feel with a short stroke. Ideal for telecommunications and test equipment, as well as professional audio and instrumentation applications.

    SPECIFICATIONS

    • CONTACT RATING: 100mA 30VDC
    • MECHANICAL LIFE: 30,000 Cycles Min.
    • ELECTRICAL LIFE: 10,000 Cycles Min.
    • CONTACT RESISTANCE: 100mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC for 60 Seconds
    • OPERATING FORCE:
      • 2 Pole: 230gf ± 50gf
      • 4 Pole: 280gf ± 50gf
      • 6 Pole: 380gf ± 50gf
    • OPERATING TEMPERATURE: -20°C to 70°C

    MATERIALS

    • HOUSING: PBT (UL94-HB) Standard or (UL94-V0)
    • ACTUATOR: POM Standard or PA66 (UL94-V0)
    • TERMINAL BASE: PA66 (UL94-HB) Standard or (UL94-V0)
    • MOVING CONTACTS: Silver (std) or Gold Copper Alloy
    • TERMINALS: Silver Over Brass

    LC Series Pushbutton Switches

    View product page link View datasheet link

    The LC series of pushbutton switches offered by E-Switch have both latching or momentary functions and shorting or non-shorting options. There is a variety of housing styles available.

    Great for performance audio, low power on/off designs, external hard drives and modems, telecommunications, networking and computers/servers.

    SPECIFICATIONS

    • CONTACT RATING: 300mA 30VDC
    • LIFE EXPECTANCY: 10,000 Cycles Typical
    • CONTACT RESISTANCE: 20mΩ Max. Initial at 2-4VDC, 100mA
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING FORCE: See Individual Specifications
    • OPERATING TEMPERATURE: -20°C to 85°C

    MATERIALS

    • HOUSING: Tin Over Steel
    • ACTUATOR: Acetal
    • TERMINAL BASE: Phenolic
    • SPRING: Spring Steel
    • TERMINALS: Silver Over Brass
    • CONTACT: Silver Over Phosphor Bronze

    TL3301 Series SMT Tactile Switches

    View product page link View datasheet link

    The TL3301 series is a 6mm x 6mm SMT tact switch.

    Designed for SMT applications, each model has different features ranging from low profile designs, normally opened, right angle, and dual action.

    Applications include telecommunications, consumer electronics, audio/visual, medical devices, testing/instrumentation and computer/peripherals.

    SPECIFICATIONS

    • RATING: 50mA 12VDC
    • MECHANICAL LIFE: ≥100,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 100gf ± 50gf; 160gf± 50gf; 260gf ± 50gf

    TL6700 Series Sealed SMT Tactile Switch

    View product page link View datasheet link

    The TL6700 is our newest addition to our sealed tact switch line. An SMT Sealed Tactile switch, it features an improved seal design and protects against more aggressive wash processes.

    Great for use in portable handheld devices, consumer electronics, telecommunications and medical devices.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 100,000 cycles at 260gf; 500,000 cycles at 160gf
    • CONTACT RESISTANCE: 100mΩ Max. Initial at 2-4VDC
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 160gf ± 50gf; 260gf ± 50gf
    • OPERATING TEMP: -20°C to 70°C
    • TRAVEL: 0.35 ± 0.2mm

    TL6120 Series Process Sealed SMT Tactile Switch

    View product page link View datasheet link

    The TL6120 is one of the TL6100 models. Other models include the TL6105 (Earth Ground Termination) and TL6110 (Right Angle Thru Hole Version).

    The TL6120 is the Surface Mountable version of the TL6100, and is process sealed. It comes with multiple actuator length options and multiple gram force options. It is mainly used in the telecommunications and consumer electronics industries, and has many other applications.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 80,000 Cycles
    • CONTACT RESISTANCE:
      • 50mΩ Max., Typical at 5VDC
      • 100mA for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 10,000MΩ Min.
    • DIELECTRIC STRENGTH: 300VAC
    • ACTUATION FORCE: 130gf ± 50gf; 160gf ± 50gf; 300gf ± 50gf; 500gf ± 100gf
    • OPERATING TEMP: -40°C to 85°C

    MS Series Miniature Snap Action Switches

    View product page link View datasheet link

    These miniature snap-action switches come with a wide variety of actuator, operating force and termination options. They are available in gold and 5 amp versions and are used in the appliance, gaming, industrial controls and vending machine markets, among others. Please check the PDF data sheet to your left for more information, including part numbers.

    SPECIFICATIONS

    • CONTACT RATING:
      • Gold; 0.4VA Max. at 20VDC or VAC Max.
      • 5Amps at 125/250VAC-UL, CUL
    • LIFE EXPECTANCY: 50,000 Cycles Minimum
    • MECHANICAL LIFE: 1,000,000 Cycles Typical
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 1,000VAC for 1 Minute
    • OPERATING TEMP: -25°C to 85°C (std)
    • OPERATING FORCE: See Chart on Data Sheet

    MATERIALS

    • SWITCH HOUSING: High Temperature PBT (UL94-V0)
    • ACTUATOR BUTTON: High Temperature PBT (UL94-V0)
    • CONTACTS: Silver (std) or Gold
    • TERMINALS: Copper Alloy, Plated

    TL9000 Series Soft Touch Tactile

    View product page link View datasheet link

    The TL9000 series is a soft touch tactile switch with a long travel and light force. Its carbon pill contact design works great for the telecommunications, consumer electronics, audio/visual, medical, testing/instrumentation and computer markets.

    SPECIFICATIONS

    :

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 100,000 Cycles Min.
    • CONTACT RESISTANCE: 1,000mΩ
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATOR FORCE: 120gf ± 50gf Min.
    • OPERATING TEMP: -20°C to 70°C
    • TRAVEL: 1.00 ± .20mm

    TL3302 Series 3.5mm x 6mm SMT Tactile Switch

    View product page link View datasheet link

    TL3302 series tact switches feature a 3.5mm x 6mm packaged design. The TL3302 is an SMT tactile switch with reliable dome contact technology and strong tactile feedback.

    Applications for this switch include telecommunications, consumer electronics, audio/visual, medical devices, testing/instrumentation and computer/peripherals.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 20,000-50,000 Cycles, Depending on Model
    • CONTACT RESISTANCE: 100mΩ Max., Typical at 2-4VDC; 100mA
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 130gf ± 50gf, 180gf ± 50gf, 260gf ± 50gf
    • OPERATING TEMPERATURE: -20°C to 70°C
    • TRAVEL: 0.25 + .02/-0.1mm

    TL3315 Series Low Profile SMT Tactile Switch

    View product page link View datasheet link

    The TL3315 series tactile switches features a very low profile (.55mm) and is surface mount, making it a great tact switch for applications that have a tight fit.

    This switch is great for consumer electronics and audio/visual devices. It is also great for medical devices, testing/instrumentation, telecommunications and computers/peripherals.

    SPECIFICATIONS

    • ELECTRICAL LIFE:
      • 1,000,000 Cycles - 100gf
      • 500,000 Cycles - 160gf
      • 200,000 Cycles - 250gf
    • CONTACT RATING: 50mA
    • CONTACT RESISTANCE: 200mΩ Initial Max.
    • INSULATION RESISTANCE: 50MΩ Min. at 100VDC
    • DIELECTRIC STRENGTH: 250VAC
    • FORCE: 100gf ± 30gf; 160gf ± 50gf; 250gf ± 50gf
    • TRAVEL: 0.20mm
    • OPERATING TEMPERATURE: -20°C to 70°C
    • STORAGE TEMPERATURE: -25°C to 80°C

    TL2243 Series Double Stacked Low Profile Tactile Switch

    View product page link View datasheet link

    TL2243 tactile switches are a low profile, double stacked tact switch that can save space on the PC board.

    Applications are used in telecommunications equipment, medical, testing and instrumentation, consumer electronics, audio/visual and computers.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 30,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max
    • INSULATION RESISTANCE: 100MΩ Min. @100VDC
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 180gf ± 50gf
    • OPERATING TEMP: -20°C to 70°C
    • TRAVEL: 0.25mm

    TL1150 Series Tactile Switches

    View product page link View datasheet link

    TL1150 thru hole tactile switch has a long operating life cycle: 1,000,000 actuations. It has a 2-lead 6mm x 6mm design and is used in the following applications: Telecommunications, Consumer Electronics, Audio/Visual, Medical, Testing/Instrumentation, Computer/Servers/Peripherals.

    SPECIFICATIONS

    • RATING: 50mA 30VDC
    • ELECTRICAL LIFE: 1,000,000 Cycles
    • CONTACT RESISTANCE: 100mΩ at 5VDC
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 600VAC
    • OPERATING FORCE: 70gf ± 20gf
    • OPERATING TEMP: -25°C to 85°C
    • TRAVEL: 0.35 ± 0.2mm

    TL1140 Series Long Life Thru-Hole Tactile Switch

    View product page link View datasheet link

    The TL1140 series thru hole tact switch has a long operating life of 1,000,000 cycles. Two lead design. Markets include telecommunications, consumer electronics, audio/visual, medical, testing/instrumentation, computer servers and peripherals.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 30VDC
    • LIFE EXPECTANCY: 1,000,000 Cycles
    • CONTACT RESISTANCE: 100mΩ at 5VDC
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 600VAC
    • ACTUATION FORCE: 70gf ± 20gf
    • OPERATING TEMP: -25°C to 85°C
    • TRAVEL: 0.35mm ± 0.2mm

    TL58 & TL59 Series Tact Switches

    View product page link View datasheet link

    The TL58 and TL59 series switches come with radial lead packaging and are designed for automatic feed. The TL58 is right angle. Many actuator lengths are available and multiple operating forces.

    Applications include consumer electronics, telecommunications and more.

    SPECIFICATIONS

    • RATING: 50mA 12VDC
    • MECHANICAL LIFE: ≥ 100,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max.
    • INSULATION RESISTANCE: > 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 100gf ± 50gf; 160gf ± 50gf; 260gf ± 50gf

    TL52 Series Sealed Radial Lead Tact Switch

    View product page link View datasheet link

    The TL52 series tactile switch is a thru hole switch that comes in radial packaging and is a sealed switch with IP-67 rating. The TL52 tactile switch with radial leads is very popular in the appliance market, and other applications, including testing/instrumentation, medical, and more.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • MECHANICAL LIFE: 100,000 Cycles
    • CONTACT RESISTANCE (Initial Max.): 100mΩ
    • INSULATION RESISTANCE: 100MΩ Min. at 100VDC
    • DIELECTRIC STRENGTH: 250VAC
    • FORCE: 160gf ± 50gf; 260gf ± 50gf
    • OPERATING TEMPERATURE: -25°C to 85°C
    • TRAVEL: 0.3 +0.2/-0.1mm
    • BOUNCE: 10m Second Max.

    TL2285 Series Pushbutton Switches

    View product page link View datasheet link

    These subminiature pushbutton switches feature a long travel and momentary and latching designs. Included in this series are the TL2201, TL2202, TL2230, TL2285 and the TL4201. Many actuator and cap options are available.

    SPECIFICATIONS

    • CONTACT RATING: 100mA 30VDC
    • MECHANICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 500VAC

    TL2230 Series Pushbutton Switches

    View product page link View datasheet link

    These subminiature pushbutton switches feature a long travel and momentary and latching designs. Included in this series are the TL2201, TL2202, TL2230, TL2285 and the TL4201. Many actuator and cap options are available.

    SPECIFICATIONS

    • CONTACT RATING: 100mA 30VDC
    • MECHANICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 500VAC

    TL2203 Series Pushbutton Switches

    View product page link View datasheet link

    These subminiature pushbutton switches feature a long travel and momentary and latching designs. Included in this series are the TL2201, TL2202, TL2230, TL2285 and the TL4201. Many actuator and cap options are available.

    SPECIFICATIONS

    • CONTACT RATING: 100mA 30VDC
    • MECHANICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 500VAC

    TL3320 Series SMT Right Angle Tactile Switch

    View product page link View datasheet link

    TL3320 series right angle SMT tactile switch features a unique design that allows PC board edge mounting.

    Applications include computer peripherals, medical equipment, testing/instrumentation, consumer electronics, audio visual, and telecommunications.

    SPECIFICATIONS

    • CONTACT RATING: 50mA @ 12VDC
    • LIFE EXPECTANCY: 80,000 Cycles
    • CONTACT RESISTANCE: 100mΩ @ 5VDC
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • OPERATING TEMP: -20°C to 70°C
    • TRAVEL: 0.25 ± 0.15mm

    TL3330 Series SMT Right Angle Tactile Switch

    View product page link View datasheet link

    The TL3330 series SMT right angle tactile switches have a small profile that works great for many consumer electronics applications. Multiple gram force options.

    Other applications include audio/visual, telecommunications, medical, computers and more.

    SPECIFICATIONS

    • CONTACT RATING: 50mA @ 12VDC
    • LIFE EXPECTANCY: 50,000 Cycles - 130gf; 30,000 Cycles - 260gf
    • CONTACT RESISTANCE: 100mΩ
    • INSULATION RESISTANCE: 100MΩ
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 130gf ± 40gf; 260gf ± 50gf
    • OPERATING TEMP: -30°C to 70°C
    • TRAVEL: 0.25mm ± 0.15mm

    TL3340 Series SMT Sub-Miniature Tactile Switch

    View product page link View datasheet link

    The TL3340 series SMT sub-miniature tact switch features reliable dome technology and a strong tactile force.

    Its sub-miniature surface mount design works great in telecommunications, consumer electronics, audio/visual, medical equipment, computers and server applications.

    SPECIFICATIONS

    • CONTACT RATING: 50mA @ 12VDC
    • MECHANICAL LIFE: 100,000 Cycles
    • ELECTRICAL LIFE: 100,000 Cycles
    • CONTACT RESISTANCE: 500mΩ (Initial Max.)
    • INSULATION RESISTANCE: 100MΩ (Min. @ 100V)
    • DIELECTRIC STRENGTH: 500VDC
    • ACTUATION FORCE: 160gf ± 50gf
    • OPERATING TEMPERATURE: -35°C to 85°C
    • STORAGE TEMPERATURE: -35°C to 85°C
    • TRAVEL: 0.20 ± 0.10mm

    TL1014 Series Micro-Miniature Right Angle SMT Tact

    View product page link View datasheet link

    The TL1014 subminiature tact switch is side mount actuated. This right angle SMT tact switch comes in tape and reel packaging for easy insertion into your design. Applications include telecommunications, consumer electronics, audio/visual, medical, computer servers, and testing/instrumentation.

    SPECIFICATIONS

    • CONTACT RATING: 12VDC, 50mA
    • LIFE EXPECTANCY: 100,000 Cycles Minimum
    • CONTACT RESISTANCE: 100mΩ Max.
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATOR FORCE: 180gf ± 50gf Min.
    • OPERATING TEMP: -20°C to 70°C
    • TRAVEL: 0.3 ± 0.1mm

    MATERIALS

    • HOUSING: Nylon 46
    • ACTUATOR: Nylon 46 COVER: Stainless Steel CONTACT DOME: Stainless Steel TERMINALS: Silver Plated Brass

    901 Series Right Angle SMT Tact Switch

    View product page link View datasheet link

    The 901 series right angle SMT tactile switch features a unique design that allows PC board edge mounting. Its subminiature size saves space in your design.

    Applications for the 901 series right angle SMT tact switch include telecommunications, consumer electronics, audio/visual, medical instrumentation, testing equipment and computer peripherals.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 50,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max. Initial
    • INSULATION RESISTANCE: 100MΩ Min. at 100VDC
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATOR FORCE: 180gf ± 50gf Min.
    • OPERATING TEMPERATURE: -20°C to 70°C
    • TRAVEL: 0.30 ± 0.1mm

    JS1300 Series 5-position Navigation Switch

    View product page link View datasheet link

    The JS1300 series navigation switch is the latest in design and functionality of E-Switch's Navigation series. Loaded with features, including the 5-position navigation, very low profile, sleek, SMT design, it replaces 5 independent switches. This navigation switch is great for use in consumer applications where user interface is needed, such as GPS tracking systems, handheld consumer devices, wireless communications, and navigation.

    SPECIFICATIONS

    • CONTACT RATING: 20mA 12VDC
    • LIFE EXPECTANCY: 200,000 Actuations in Any Direction (X, Y, or Z)
    • CONTACT RESISTANCE: 500mΩ
    • INSULATION RESISTANCE: 100MΩ
    • DIELECTRIC STRENGTH: 100VAC for 1 Minute
    • OPERATING TEMPERATURE: -25°C to 70°C
    • OPERATING FORCE:
      • Push = 360gf ± 70gf
      • Tilt = 180gf ± 60gf
      • TRAVEL: Push: 0.15 ± .01mm
    • Tilt: .20 ± .01mm, (3.5 +5/-1 degrees)

    MATERIALS

    • COVER: Nickel Silver
    • BASE: Nylon
    • ACTUATOR: Nylon
    • MOVING CONTACT: Stainless Steel, Silver Plated
    • TERMINALS: Copper Alloy, Silver Plated
    • TAPE: Teflon

    JS1400 Series 5-position Navigation Switch

    View product page link View datasheet link

    The JS1400 series navigation switch is an SMT, 5-position joystick switch. Navigation switches are used in applications where user interface is needed.

    The JS1400 series navigation switch applications include handheld instrumentation, navigation, telecommunications, and consumer electronics where user interface is required.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 100,000 Actuations
    • CONTACT RESISTANCE: 100mΩ
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 250VAC
    • OPERATING TEMPERATURE: -20°C to 70°C
    • OPERATING FORCE:
      • Push = 360gf ± 60gf
      • Tilt = 160gf ± 50gf
    • TRAVEL:
      • Center Direction: 0.25+0.1/-0.2mm
      • Tilt: 5+2.5/-1 Degrees

    TL1015 Series Micro-Miniature Tact Switch

    View product page link View datasheet link

    Micro tact switch: The TL1015 series ultra-miniature tact switch is top actuated for miniature SMT applications. Switch available with Boss (locating pin) and without Boss. Comes in tape and reel packaging. Applications include consumer electronics, telecommunications, audio/visual, medical and more.

    SPECIFICATIONS

     

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 50,000 Cycles
    • CONTACT RESISTANCE: 100mΩ Max. Initial
    • INSULATION RESISTANCE: 100MΩ Min. at 100VDC
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATOR FORCE: 160gf ± 50gf
    • OPERATING TEMP: -20°C to 70°C
    • TRAVEL: 0.2 ± 0.1mm
    • PACKAGING: Tape and Reel
    • TAPE & REEL: 2,500 Pieces per Reel

    TL3342 Series Low Profile SMT Tact Switch

    View product page link View datasheet link

    The TL3342 series SMT tactile switch has a very low profile design and positive tactile response.

    Markets for this switch include medical, testing/instrumentation, consumer electronics, telecommunications and more.

    SPECIFICATONS

    • CONTACT RATING: 50mA 12VDC
    • LIFE EXPECTANCY: 100,000 Cycles Typical
    • CONTACT RESISTANCE: 20mΩ Max. Initial at 2-4VDC, 100mA
    • INSULATION RESISTANCE: 100MΩ
    • DIELECTRIC STRENGTH: 1,000 Vrms at Sea Level
    • ACTUATION FORCE: 160gf ± 50gf; 260gf ± 50gf

    TL3310 Series Normally Closed Tactile Switch

    View product page link View datasheet link

    The TL3310 series normally closed, surface mount (SMT) tactile switch offers the user big quality in a little package.

    Applications include telecommunications, consumer electronics, audio/visual, medical equipment, testing/instrumentation, and computer peripherals.

    SPECIFICATIONS

    • CONTACT RATING: 50mA 50VDC
    • LIFE EXPECTANCY:
      • 100,000 Cycles - (100gf)
      • 50,000 Cycles - (200gf)
    • CONTACT RESISTANCE: 100mΩ Max., Typical at 2-4VDC
    • INSULATION RESISTANCE: 1000MΩ
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE: 100gf ± 40gf, 200gf ± 50gf
    • OPERATING TEMP:
      • -20°C to 70°C (100gf)
      • -30°C to 80°C (200gf)
    • TRAVEL:
      • 0.3mm ± 0.15mm (100gf)
      • 0.5mm ± 0.2mm (200gf)

    TL3350 Series Dual Action Tactile Switch

    View product page link View datasheet link

    The TL3350 series dual action tactile switch gives positive tactile feedback in 2 distinct positions. This tact switch comes with or without an actuator in its low profile, SMT surface mount tact switch design.

    The TL3350 SMT tact switch is great for consumer electronics applications, especially digital camera products. It is also used in telecommunications, medical equipment, audio/visual, testing/instrumentation, and computer peripherals where a tact switch saves space with its small footprint.

    SPECIFICATIONS

    • CONTACT RATING: 20mA 30VDC
    • LIFE EXPECTANCY: 10,000 Cycles
    • CONTACT RESISTANCE: 200mΩ
    • INSULATION RESISTANCE: 50MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC
    • ACTUATION FORCE:
      • 100gf ± 40gf 1st Circuit
      • 250gf ± 80gf 2nd Circuit
      • OPERATING TEMP: -20°C to 70°C
    • TRAVEL:
      • 0.30 ± 0.10mm 1st Circuit
      • 0.55 ± 0.15mm 2nd Circuit

    SS Series Sub-Miniature Snap Action Switches

    View product page link View datasheet link

    These NEW sub-miniature snap action switches are designed for higher reliability applications. With their small package size they work great in the following markets: Appliance, Timing Controls, Vending Machines, Gaming and Industrial Controls.

    SPECIFICATIONS

    • CONTACT RATING:
      • Gold; 0.4VA Max. at 20VDC or VAC Max.
      • 0.1Amps at 5VDC
      • 1.5Amps at 250-UL
      • 3Amps at 125-UL
    • LIFE EXPECTANCY: 100,000 Cycles Typical
    • MECHANICAL LIFE: 1,000,000 Cycles Typical
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 500VDC
    • OPERATING TEMPERATURE: -25°C to 75°C
    • OPERATING FORCE: See Chart in Data Sheet

    MATERIALS

    • SWITCH HOUSING: High Temperature PBT (UL94 V-0)
    • ACTUATOR BUTTON: High Temperature PBT (UL94 V-0)
    • TERMINALS: Copper Alloy, Plated
    • CONTACTS: Silver Alloy (Standard) or Gold
    • SPRING: Spring Steel

    TS Series Sub-Miniature Snap Action Switches

    View product page link View datasheet link

    The TS series subminiature snap action switch comes with a vertical, left angle or right angle PC pin termination. The applications for the TS switch include security and detection devices, appliances, instrumentation, power tools and more.

    SPECIFICATIONS

    • CONTACT RATING: 0.3A 6VDC
    • MECHANICAL LIFE: 50,000 Cycles Typical
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 250VAC for 1 Minute
    • OPERATING TEMPERATURE: -25°C to 85°C
    • STORAGE TEMPERATURE: -30°C to 85°C

    TS2 Series Surface Mount Snap Action Switch

    View product page link View datasheet link

    The TS2 Snap Action Switch has surface mount termination (SMT). It has a subminiature package size and is designed for higher reliability applications. Great for the appliance market and gaming/vending applications. Also used for timing controls and testing/instrumentation.

    SPECIFICATIONS

    • CONTACT RATING: 0.1A 125VAC or 48VDC
    • MECHANICAL LIFE: 3,000,000 Cycles
    • CONTACT RESISTANCE (Initial Max.): 300mΩ at 5VDC
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH (1 Min.): 1,000V
    • BOUNCE: 5m Second Max
    • OPERATING TEMPERATURE: -25°C to 85°C
    • FORCE: 70gf ± 20gf

    LS Series Standard Snap Action Switches

    View product page link View datasheet link

    These LS Series snap action switches are available in gold and 15 amp versions. Also available in a wide variety of actuator, operating force and termination options. Please refer to the PDF data sheet to the left to get more information about these options.

    The applications these switches are designed for include the appliance and gaming industries, industrial controls, power tools, vending machines and timing controls.

    SPECIFICATIONS

    • CONTACT RATING:
      • Gold; 0.4VA Max. at 20VDC or VAC Max.
      • 15Amps at 125/250VAC-UL, CUL, VDE
    • LIFE EXPECTANCY: 50,000 Cycles Minimum
    • MECHANICAL LIFE: 1,000,000 Cycles Typical
    • INSULATION RESISTANCE: 100MΩ Min.
    • DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
    • OPERATING TEMP: -25°C to 85°C (std)

    MATERIALS

    • SWITCH HOUSING: High Temperature PBT (UL94 V0)
    • ACTUATOR BUTTON: High Temperature PBT (UL94 V0)
    • CONTACTS: Silver (std) or Gold
    • TERMINALS: Copper Alloy, Plated

    200A Series Sealed Sub-Miniature Toggle Switches

    View product page link View datasheet link

    The 200A Series sub-miniature toggle switches are sealed to IP-67 standards.

    Applications include telecommunications, instrumentation, networking, and medical equipment devices.

    SPECIFICATIONS

    • CONTACT RATING: Dependent on Contact Material
    • MECHANICAL LIFE: 30,000 Make-and-Break Cycles
    • ELECTRICAL LIFE: 6,000 at Full Load
    • CONTACT RESISTANCE: 10mΩ Max. Initial for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • CONTACTS: Silver or Gold Plated Copper Alloy
    • TERMINAL SEAL: Epoxy

    200B Series Sealed SMT Sub-Miniature Toggle Switches

    View product page link View datasheet link

    The 200B Series Toggle Switch is an IP-67 rated, sub-miniature SMT switch that provides a variety of switching functions. Its applications include telecommunications, instrumentation, networking, medical equipment and more.

    SPECIFICATIONS

    • CONTACT RATING: Dependent on Contact Material
    • MECHANICAL LIFE: 30,000 Make-and-Break Cycles
    • CONTACT RESISTANCE: 20mΩ Max. Initial for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • CONTACTS/TERMINALS: Gold Plate Over Nickel Plated Copper Alloy
    • TERMINAL SEAL: Epoxy

    400 Series Sub-Miniature Rocker Switches

    View product page link View datasheet link

    The 400 Series sub-miniature rocker switches offer a variety of model styles and actuator options and are used in the instrumentation, telecommunications, test equipment, computer peripherals and networking markets.

    SPECIFICATIONS

    • CONTACT RATING: Dependent on Contact Material
    • ELECTRICAL LIFE: 30,000 Make-and-Break Cycles
    • CONTACT RESISTANCE: 20mΩ Max. Initial
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • CONTACTS: Silver or Gold Plated Copper Alloy

    400A Series Sealed, Sub-Miniature Rocker Switches

    View product page link View datasheet link

    The 400 Series sub-miniature rocker switches feature a variety of switching options and are sealed to IP67 ratings.

    The 400 series sub-miniature sealed rocker switches are used in the instrumentation, telecommunications, test equipment, computer peripherals and networking markets.

    SPECIFICATIONS

    • CONTACT RATING: Dependent on Contact Material
    • ELECTRICAL LIFE: 30,000 Make-and-Break Cycles at Full Load
    • CONTACT RESISTANCE:
      • 10mΩ Max. Initial at 2-4VDC
      • 100mA for Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • HOUSING: Glass Filled Nylon, Flame Retardant, Heat Stabilized (UL94-V0)
    • ACTUATOR: Nylon, Black std. (UL94-HB)
    • ACTUATOR SEAL: Internal O-Ring
    • SWITCH SUPPORT: Brass or Steel, Tin Plated
    • ACTUATOR PIVOT & MOUNTING BRACKET: Nylon (UL94-HB)
    • ACUTATOR PIVOT RETAINER: Stainless Steel
    • CONTACTS/TERMINALS: Silver or Gold Plated Copper Alloy
    • TERMINAL SEAL: Epoxy

    400B Series Sub-Miniature SMT, Sealed Rocker

    View product page link View datasheet link

    The 400 B series sub-miniature SMT rocker switch offers a variety of model styles and actuator options and are used in the instrumentation, telecommunications, test equipment, computer peripherals and networking markets. Features include: low profile for SMT applications; ergonomically designed for human interface; right angle design strengthens support to pc board. Rated to IP67 standards.

    SPECIFICATIONS

    • CONTACT RATING: 0.4VA 20V AC or DC Max.
    • LIFE EXPECTANCY: 50,000 Make-and-Break Cycles at Full Load
    • CONTACT RESISTANCE: 20mΩ Max Initial
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMP: -30°C to 85°C
    • PACKAGING: Tape and Reel

    MATERIALS

    • CONTACTS/TERMINALS: Gold Plate Over Nickel Plated Copper Alloy
    • TERMINAL SEAL: Epoxy

    800A Series Sealed, Sub-Miniature Pushbutton Switches

    View product page link View datasheet link

    This sealed sub-miniature pushbutton switch has a butt contact design and an IP-67 sealed option. Markets for this switch include telecommunications, networking, computers/servers, performance audio, instrumentation, low power on/off designs, external hard drives and modems.

    SPECIFICATIONS

    • RATINGS: 1A 120VAC
    • LIFE EXPECTANCY: 50,000 Cycles Typical
    • CONTACT RESISTANCE:
      • 10mΩ Max. Typical at 2-4VDC
      • 100mA For Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING FORCE: 200gf ± 50gf

    MATERIALS

    • CASE: Diallyl Phthalate (DAP)
    • PLUNGER: Glass Filled Nylon or Glass Filled Polyester
    • BUSHING: Nickel Plated Brass
    • HOUSING: Stainless Steel
    • CONTACTS: Silver or Gold Plated Copper Alloy

    800B Series Sealed, Sub-Miniature Pushbutton Switches

    View product page link View datasheet link

    These sealed subminiature pushbutton switches come in a surface mount design and tape and reel packaging. Applications include telecommunications, networking, performance audio, instrumentation, computers/servers, external hard drives and modems, and low power on/off designs. IP67 rated.

    SPECIFICATIONS

    • CONTACT RATING:
      • 0.4VA 20VAC or DC Max. (Gold)
      • 3A 120VAC or 28VDC (Silver)
      • 1A 250VAC (Silver)
    • LIFE EXPECTANCY: 50,000 Make-and-Break Cycles at Full Load
    • CONTACT RESISTANCE: 20mΩ Typ. Initial at 2-4VDC, 100mA
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C
    • PACKAGING Tape & Reel

    MATERIALS

    • CASE & BUSHING: High Temp Material, Glass Filled 4/6 Nylon, Flame Retardant, Heat Stabilized (UL94-V0)
    • PLUNGER: High Temp Material, Glass Filled Nylon 4/6, Flame Retardant, Heat Stabilized (UL94-V0) Internal O-Ring Seal Standard
    • SWITCH SUPPORT: Brass/Steel, Tin or Tin-Lead Plated
    • CONTACTS/TERMINALS: Gold or Silver Plate Over Nickel Plated Copper Alloy
    • TERMINAL SEAL: Epoxy

    500 Series Miniature Slide Switches

    View product page link View datasheet link

    The 500 series slide switches are PC Board mountable or panel mountable. They come in single or double pole options and have multiple actuator height options. They are used in consumer electronics, instrumentation, computer servers/peripherals, and test/measurement applications.

    SPECIFICATIONS

    • CONTACT RATING:
      • Gold - 0.4VA 20V AC or DC
      • Silver - 5A 120VAC, 2A 250VAC
    • ELECTRICAL LIFE: 50,000 Make-and-Break Cycles at Full Load
    • CONTACT RESISTANCE:
      • 10mΩ Max. Typical at 2-4VDC
      • 100mA for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • CASE: Diallyl Phthalate (DAP) UL 94V0
    • HOUSING: Stainless Steel
    • SLIDE HANDLE: Nylon UL 94HB
    • CONTACTS: Silver or Gold Plated Copper Alloy

    500A Series Sub-Miniature Slide Switches

    View product page link View datasheet link

    The 500A series are sub-miniature slide switches that have 3 mounting options: SMT, Panel mount or PC Board mount. Used in many consumer electronics and computer peripheral applications.

    SPECIFICATIONS

    • CONTACT RATING:
      • 3A 120VAC
      • 1A 250VAC
    • ELECTRICAL LIFE: 30,000 Make-and-Break Cycles at Full Load
    • CONTACT RESISTANCE:
      • 10mΩ Max. Typical at 2-4VDC
      • 100mA for Both Silver and Gold Plated Contacts
    • INSULATION RESISTANCE: 1,000MΩ Min.
    • DIELECTRIC TEMPERATURE: 1,000V RMS at Sea Level
    • OPERATING TEMPERATURE: -30°C to 85°C

    MATERIALS

    • CASE: Diallyl phthalate (DAP)
    • HOUSING: Stainless Steel
    • SLIDE HANDLE: Nylon
    • CONTACTS & TERMINALS: Gold or Silver Plated Copper Alloy

    EG1300 Series Slide Switch with 3 Position

    View product page link View datasheet link

    This new EG1300 series slide switch features tape and reel packaging, and is a 3-position switch. Offers two actuator lengths to best fit your application.

    The markets for this product include computer servers/peripherals, consumer electronics, instrumentation and test & measurement, among others.

    SPECIFICATIONS

    • CONTACT RATING: 300mA at 4VDC
    • MECHANICAL LIFE: 10,000 Cycles
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 70mΩ (Initial Max.)
    • INSULATION RESISTANCE: 100MΩ (Min. at 100VDC)
    • DIELECTRIC STRENGTH: 100VAC
    • OPERATING TEMPERATURE: -10°C to 60°C
    • STORAGE TEMPERATURE: -20°C to 80°C
    • FORCE: 200gf ± 150gf to Center Position, 150gf ± 100gf from Center Position
    • TRAVEL: 1.5 ± 0.1mm from Each Position

    EG1390 Series 2 Position SMT Sub-Miniature Slide Switch

    View product page link View datasheet link

    2-position SMT subminiature slide switch comes in tape and reel packaging.

    Applications include computer servers/peripherals, consumer electronics, instrumentation, test & measurement, and more.

    SPECIFICATIONS

    • CONTACT RATING: 300mA 4VDC
    • MECHANICAL LIFE: 10,000 Cycles
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 70mΩ Initial Max.
    • FORCE: 200gf ± 150gf to Center Position
    • INSULATION RESISTANCE: 100MΩ Min. at 100VDC
    • DIELECTRIC STRENGTH: 100VAC
    • OPERATING TEMPERATURE: -10°C to 60°C
    • STORAGE TEMPERATURE: -20°C to 70°C
    • TRAVEL: 1.5 ± 0.1mm Each Position

    EG1400 Series 3 Position Sub-Miniature SMT Slide Switch

    View product page link View datasheet link

    3-position SMT slide switch is sub-miniature in design and comes in tape and reel packaging.

    Applications include computer servers and peripherals, consumer electronics, instrumentation, and test & measurement.

    SPECIFICATIONS

    • CONTACT RATING: 300mA 4VDC
    • MECHANICAL LIFE: 10,000 Cycles
    • ELECTRICAL LIFE: 10,000 Cycles
    • CONTACT RESISTANCE: 70mΩ Initial Max.
    • FORCE: 200 ± 150gf in Both Directions
    • INSULATION RESISTANCE: 100MΩ Min. at 100VDC
    • DIELECTRIC STRENGTH: 100VAC
    • OPERATING TEMPERATURE: -10°C to 60°C
    • STORAGE TEMPERATURE: -20°C to 80°C
    • TRAVEL: 1.5 ± 0.1mm Each Position

    KAN Series Half-Pitch Low Profile Dip Switches

    View product page link View datasheet link

    The KAN series half-pitch low profile DIP switches are surface mountable and come in tape and reel packaging. These DIP switches are used for garage door openers, test & instrumentation, telecommunications, and controller applications, among others.

    SPECIFICATIONS

    • OPERATING LIFE: 2,000 Make-and-Brake Cycles, Each Circuit
    • SWITCH FUNCTION: 2, 4, 6, 8 and 10 Positions
    • RATINGS:
      • Switch: 25mA 24VDC
      • Carry: 100mA 50VDC
    • CONTACT RESISTANCE: Initial 50mΩ Typical @ 2-4VDC, 100mA
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • DIELECTRIC STRENGTH: 500V RMS at Sea Level Between Adjacent Terminals
    • OPERATING TEMPERATURE: -40°C to 85°C

    MATERIALS

    • BASE: PPS UL94-V0, Black Finish
    • COVER: PPS UL94-V0, Black Finish
    • ACTUATOR: Nylon UL94-V0, White Finish
    • MOVABLE CONTACT: Copper Alloy, Gold Finish
    • TERMINAL CONTACT: Brass, Gold Finish
    • TAPE SEAL: Mylar, Amber Color

    KAS Series Slide Dip Switches

    View product page link View datasheet link

    The KAS series slide DIP switches are available with PC pin or right angle PC pin termination. Available in up to 12 positions, these DIP switches come with tape seal options and are great for controller applications, along with telecommunications and test and instrumentation.

    PLEASE NOTE: The right angle PC Pin termination option is not available with the recessed actuator. It is only available with the extended actuator.

    SPECIFICATIONS

    • CONTACT RATING:
      • Switch: 25mA 24VDC
      • Carry: 100mA 50VDC
    • OPERATING LIFE: 2,000 Make-and-Break Cycles, Each Circuit
    • CONTACT RESISTANCE:
      • Initial: 50mΩ Typical at 2-4VDC at 100mA
      • After Life: 100mΩ Typical at 2-4VDC at 100mA
    • INSULATION RESISTANCE: 100MΩ Min. at 500VDC
    • OPERATING FORCE: 1000gf Max.
    • DIELECTRIC STRENGTH: 500V RMS Min. at Sea Level Between Adjacent Terminals
    • TRAVEL, ACTUATOR: 2.00mm Typical
    • TEMPERATURE RANGE: Operating/Storage: -40°C to 85°C
    • VIBRATION: To MIL-STD-202F, Method 201 A
    • SHOCK: To MIL-STD-202F, Method 213B, Condition A
    • CAPACITANCE: 5pf Max. Between Adjacent Terminals
    • SWITCH FUNCTION: SPST, 1 Thru 12 Positions (Except Position 11)
    • SOLDERING RECOMMENDATION
      • Wave: 500°F (260°C) for 5s Max.
      • Hand: 30W Soldering Iron at 608°F (320°C) for 2s Typical
      • Keep all switches in the "OFF" position during soldering and cleaning process.

    MATERIALS

    • HOUSING AND ACTUATOR: Glass Filled Polyester (PBT) UL94-V0
    • CONTACTS: Phosphor Bronze With Gold Plate Over Nickel Plate
    • TERMINALS: Phosphor Bronze With Gold Plate Over Nickel Plate
    • TAPE: Mylar

    PACKAGING

    • Switches are supplied in standard IC tubes with all poles "OFF".

    KAP Series Piano Dip Switches

    View product page link View datasheet link

    The KAP series piano DIP switches employ a reliable wiping contact mechanism that ensures stable contact at low resistance. Available features include:

    • Gold plated contacts (over nickel).
    • Choice of recessed or extended actuators.
    • All materials are high temperature UL 94V0.
    • Choice of top-side "OFF" or top-side "ON" configurations.
    • Top tape sealed versions designed to withstand wave soldering and board washing.

    Applications for the KAP series piano DIP switches include garage door openers, test & instrumentation, telecommunications and controller applications.

    SPECIFICATIONS

    • OPERATING LIFE: 2,000 Make-and-Break Cycles, Each Circuit
    • SWITCH FUNCTION: SPST, 2 Thru 12 Positions (Except Position 11)
    • CONTACT RATING:
      • Switch: 25mA @ 24VDC
      • Carry: 100mA @ 50VDC
    • CONTACT RESISTANCE:
      • Initial: 50mΩ Typical @ 2-4VDC @ 100mA
      • After Life: 100mΩ Typical @ 2.4DC @ 100mA
    • INSULATION RESISTANCE: 100MΩ Min. @ 500V DC
    • OPERATING FORCE: 1000gf Max.
    • TRAVEL, ACTUATOR: 2.0mm Typical
    • DIELECTRIC STRENGTH: 500V RMS Min. at Sea Level Between Adjacent Terminals
    • TEMPERATURE RANGE: Operating/Storage: -40°C to 85°C
    • VIBRATION: To MIL-STD-202F, Method 201 A
    • SHOCK: To MIL-STD-202F, Method 213B, Condition A
    • CAPACITANCE: 5pf Max. Between Adjacent Terminals
    • SOLDERING RECOMMENDATION
      • Wave: 500°F (260°C) for 5s Max.
      • Hand: 30W Soldering Iron at 608°F (320°C) for 2s Typical
      • Keep all switches in the "OFF" position during soldering and cleaning process.

    MATERIALS

    • HOUSING AND ACTUATOR: Glass Filled Polyester (PBT) UL94-V0
    • CONTACTS: Phosphor Bronze With Gold Plate Over Nickel Plate
    • TERMINALS: Phosphor Bronze With Gold Plate Over Nickel Plate
    • TAPE: Mylar

    PACKAGING

    • Switches are supplied in standard IC tubes with all poles "OFF".