Serial Attached SCSI (SAS) Connectors

3M™ Serial Attached SCSI (SAS) Connector, 1.27 mm

Image of 3M's Serial Attached SCSI (SAS) Connectors3M Serial Attached SCSI (SAS) Connectors are offered in both device plug and backplane receptacle combo formats and are designed to the SFF-8482 specification. This standard was designed to support internal backplane environments which allow a direct connection from the hard disk drive (HDD) to the backplane (device-to-host). The SAS combo plug, 29 position from 3M is used on the device side (optical or HDD) and has a variety of features that makes it appealing for high-volume environments. The plug connector is available in two different configurations: surface-mount, vertical and straddle-mount, right angle. The surface-mount plug version is equipped with PCB guides to ensure the proper alignment between the HDD PCB and connector contact tails. The 3M SATA plug, 22 positions is designed for interoperability with the 29 position SAS receptacles.

Technical Information
  • SFF-8482 specification
  • 1.27 mm in-line contacts
  • EMLB contacts for HOT plugging
  • Extended height combo receptacle for backplane
  • Low voltage requirement (1600 mV peak-to-peak)
  • Point-to-point signaling
  • Accommodates 3.3, 5.0, and 12 V requirements
  • Blind-mate guide
  • 2.5” and 3.5” HDD interface
  • Serial Advanced Technology Attachment (SATA) interoperability
Serial Attached SCSI SAS Connectors
ImageManufacturer Part NumberDescriptionConnector StyleAvailable QuantityBuy Now
CONN SOCKET SAS 29POS VERT ELEVSBR-EV-29-P-MLCONN SOCKET SAS 29POS VERT ELEVReceptacle784 - Immediate
CONN RCPT VERT SCSI 29POS T/HSBR-ST-29-S-MLCONN RCPT VERT SCSI 29POS T/HReceptacle9034 - Immediate
CONN PLUG SAS 29POS STRADDLE MNTSBH-ST-29-SA-MLCONN PLUG SAS 29POS STRADDLE MNTPlug1493 - Immediate
CONN PLUG SAS 29POS STANDARD SMDSBH-ST-29-SM-MLCONN PLUG SAS 29POS STANDARD SMDPlug0
Published: 2014-06-09