Microprocessor Designs Inc

03-Microprocessor Designs Inc
Mailing Address: 65 Longmeadow Dr, POB 160, Shelburne, VT  05482 USA
Design Services Contact: Jeff Finkelstein, 802-985-2535, jfink@updesigns.com
About 03-Microprocessor Designs Inc
The team assembled at Microprocessor Designs has a wide variety of skills required for embedded product development. To assure your products are developed properly they use a top-down development approach that enables them to tackle even the most difficult problems.

Product development is broken down into phases which include: product definition, system design, hardware design, software/firmware design and the transfer to manufacturing process. They encourage peer review at all critical milestones. They use state of the art tools for product development and documentation yielding designs that are manufacturable worldwide.
Capabilities
     Hardware Design
    • Design for RoHS Compliance
    • DSP
    • Ethernet
    • General - Digital and Analog Circuitry
    • High Density/Low Profile/BGA Packaging
    • Impedance Controlled PCB Design
    • Multilayer High-Speed Mixed Digital and Analog
    • PCB Design/Layout
    • Power Supply Design
    • Schematic Capture
    • USB
    • Video - HDMI, Display Port, DVI
     Mechanical Design
    • Enclosure Design
    • Full Product 3D Modeling
    • PCB and Component 3D Modeling
     Project Management/Logistics
    • Component Purchasing
    • Product Cost Estimating
    • Project Management
     Prototype/Manufacturing
    • Design for Manufacturing
    • Documented Pre-Production Prototypes
    • Low to Medium Volume Production Runs
    • Manufacturing Services
    • Prototype Assembly and Testing
    • Rapid Prototyping Capability
    • Test Fixture Development
     Software Design
    • ARM
    • Board Bring Up (BBU)
    • Boot Loaders
    • C/C++
    • Device Drivers (Linux, Custom Kernel)
    • DSP Algorithms, Signal Processing IP
    • Embedded Graphical User Interfaces (GUIs)
    • Microcontroller Class Embedded Software/Firmware
    • OS Based Microprocessor Embedded Software/Firmware
    • PC Based Graphical User Interfaces
    • PC Software
    • RTOS
    • RTOS-Micrium
     System Level Design
    • Design for EMI/RFI Immunity
    • Design for Testability
     Wireless Design
    • Bluetooth
    • Discrete RF Design
    • GPS
    • Pre-Certified Module Integration
    • Wi-Fi
    • ZigBee/802.15.4
    Development Tools
       IDE/Compiler
      • ADI - Visual DSP++/CROSSCORE
      • Atmel AVR Studio
      • Cypress PSOC Designer
      • Freescale Code Warrior
      • IAR
      • Microchip MPLAB
      • Texas Instruments Code Composer Studio
       Mechanical
      • SolidWorks
       Schematic/Board Layout
      • Cadence Allegro/Orcad
      • Mentor Graphics PADS
       Simulation
      • Spice/Simulation
       Other
      • National Instruments LabView
        Industries Served
        • Automotive
        • Consumer
        • Fitness Equipment
        • Industrial
        • Medical
        • Sporting Goods
          Partners
          • ANT
          • Atmel
          • Freescale Semiconductor, Inc.
          • Microchip Technology
          • Renesas Electronics America
          • Texas Instruments

          The listing of any of these providers in the Design Services Providers Network does not constitute or imply an endorsement, sponsorship, or recommendation by Digi-Key of the third party, its Web site, or the information or services available from those sources or that it is suitable for your needs. Digi-Key is not responsible for the services or information obtained from any of these sources. This information is provided as a convenience for users of the Digi-Key web site. You must make your own decision based on your independent review regarding your interactions or communications with any of these providers.