Quick Links:
Selected Filters
|
Supplier: Harwin Inc
Subtitle:
EZ-Coin Cell Battery Holders
Description:
EZ-BoardWare coin cell battery holders comprise of ultra-low, single piece surface mountable coin cell holders, and a selection of insulated coin cell holders. All holders ensure coin cell batteries are securely retained in place while cutting assembly time.
Category: Test, Tools, Other Products - Battery Products - Battery Holders, Clips, Contacts |
|
Supplier: Harwin Inc
Subtitle:
Clearance Round Spacer
Description:
M3 and M4 circular clearance thread size spacers.
Category: Test, Tools, Other Products - Hardware - Board Spacers, Standoffs |
|
Supplier: Harwin Inc
Subtitle:
Brass Hexagonal Pillars Male/Female
Description:
Base material is free machining brass, with nickel plating.
Category: Test, Tools, Other Products - Hardware - Board Spacers, Standoffs |
|
Supplier: Harwin Inc
Subtitle:
Brass Hexagonal Pillars Male/Male
Description:
Base material is free machining brass, with nickel plating.
Category: Test, Tools, Other Products - Hardware - Board Spacers, Standoffs |
|
Supplier: Harwin Inc
Subtitle:
Metric and Imperial Spacers
Description:
Brass spacers are base material is free machining brass, with nickel plating.
Category: Test, Tools, Other Products - Hardware - Board Spacers, Standoffs |
|
Supplier: Harwin Inc
Subtitle:
Self Locking Spacer
Description:
Fit spacer to underside of upper board, then attach lower board to bottom of spacer.
Category: Test, Tools, Other Products - Hardware - Board Supports |
|
Supplier: Harwin Inc
Subtitle:
Surface Mount EZ-Test Point
Description:
the S1751R is a 2mm high, surface mount test terminal, ideally suited for use with standard probes, clips and hooks. By soldering these surface mount Tests Points to a circuit board, test engineers have easy and convenient points on the PCB to take their readings. This minimizes the damage risk, ...
Category: Test, Tools, Other Products - Test and Measurement - Test Points |
|
Supplier: Harwin Inc
Subtitle:
Spring Probe - Two Part
Description:
2.54mm recommended mounting pitch, 4.20mm travel, 18.5mm body length.
Category: Test, Tools, Other Products - Test and Measurement - Test Probe Tips |
|
Supplier: Harwin Inc
Subtitle:
Sleeve for Spring Probe - Two Part
Description:
2.54mm recommended mounting pitch.
Category: Test, Tools, Other Products - Test and Measurement - Test Probe Tips |
|
Supplier: Harwin Inc
Subtitle:
Hand Crimp Tool
Description:
The Z20-320 Hand Crimp Tool consists of a ratchet mechanism hand tool and a set of jaws. The jaws comprise of upper and lower crimp dies. The contact is correctly crimped when the tool is free to open at the fully closed position, i.e. when the ratchet releases.
Category: Test, Tools, Other Products - Tools - Crimpers - Crimpers - Applicators, Presses - Hand Crimper - Circular and Rectangular Contacts |
