This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Ethernet or any other boards with an FTDI cable-compatible connector.
It features the ATmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The USB Serial module has an ISCP interface, allowing you to reprogram the chip when placed in DFU mode.
The pinouts on the connector are compatible with a standard FTDI header.
- Accessory Type:USB to Serial Adapter
- For Use With/Related Products:Arduino Boards or other MCU Boards
|A000059||USB TO SERIAL CONVERTER BOARD||USB to Serial Adapter||Arduino Boards or other MCU Boards|