t-Global Technology

- t-Global Technology is a leading manufacturer and supplier of thermal management solutions. t-Global manufactures materials in their state of art facilities in Taiwan and the UK. Their broad product portfolio covers silicone and non-silicone gap fillers, silicone and non-silicone putties, ceramic heat spreaders, combined thermal and EMI absorbers and a wide selection of die-cut insulators. Taiwan is the central location for new product development and research and the UK takes responsibility for complex engineering projects, rapid prototyping and dispensing technology. t-Global’s philosophy is based around a very short leadtime and low MOQ’s, which translates into rapid prototyping and a short time to market. 

  • Product
    Training
  • Video
     
  • Product
    Listing
  • New
    Products
  • Featured
    Products
  • Tools
    & Support
  • Company
    Information
  • Custom
    Products
Go To Product Training Module Index Page

Digi-Key’s library of more than 2000 exclusive PTM Online… On Demand® product training modules is a collection of training tools created with you – the busy design engineer – in mind. They are provided with the cooperation of participating supplier partners. From this one source, you can learn about the latest products and technologies, download datasheets, check inventory, contact our technical staff, and place an order for same-day shipment.

These modules are available in audio and non-audio formats and listed by supplier in easy-to-find alphabetical order. Simply locate the module that interests you and click on your format of choice. We hope you find these tools useful, and with new modules added continuously, we invite you to stop back often to see what’s new.


Product Training Modules Online...On Demand® is a registered trademark of Digi-Key Corporation.


Updated PTM = Updated Product Training Module - PTM        New PTM = New Product Training Module - PTM

Module NamePreviewAudioNon-AudioDurationParts List
  • Die Cut Thermal Interface Product Offering
2.9MB1.2MB5 minParts List
New PTM
  • Flexible Black Epoxy Potting Compounds
2.1MB963KB5 minParts List
  • GT Silicone Based Thermal Insulators
1.6MB380KB5 minParts List
  • H48 Product Range
3.3MB1.1MB10 minParts List
  • H48-6A Silicone Based Gap Filter
2.9MB925KB5 minParts List
  • Heat Spreading Solutions for TV Applications
3.2MB1.4MB10 minParts List
  • Introduction to the FAM Product Range
4.8MB1.9MB10 minParts List
  • Introduction to the GP2000 Range of Thermally Conductive Caps
1.6MB630KB5 minParts List
  • Introduction to the THINC Range of Thermally Conductive Caps
1.2MB264KB5 minParts List
  • L37-3 Product Range
Play3.7MB1.6MB15 minParts List
  • L37-3L Low-Bleeding Gap Fillers for Optical Devices
3.7MB1.1MB5 minParts List
  • L37-3S Ultra-soft Gap Filler for LCD
3.3MB1.1MB10 minParts List
  • LI Series Thermal Interface Material
1.9MB882KB5 minParts List
  • LI-98 Thermally Conductive Adhesive Tape
1.2MB256KB5 minParts List
  • Li98 Thermally Conductive Adhesive Tape for LED Lighting Applications
8.3MB1MB10 minParts List
  • Non-silicone Gap Fillers
4.9MB1.8MB10 minParts List
  • NSP-25 Non-Silicone Putty Introduction
4.7MB1.8MB10 minParts List
  • PC99 Series: Phase Change Materials
1.5MB226KB5 minParts List
  • PCM-99 in Automotive Battery Applications
5.1MB2.1MB10 minParts List
  • PH3 Heat Spreader Line
2.2MB861KB5 minParts List
  • T62 Graphite Based Thermal Interface Products
1.0MB295KB5 minParts List
  • T68 Product Range
2.1MB281KB5 minParts List
  • TG Series Soft Thermal Conductive Pads
3.3MB1.4MB10 minParts List
  • TG4040-D Product Overview
1.8MB200KB5 minParts List
  • TG4040S Thermal Management for Remote Radio Head
2.5MB849KB5 minParts List
  • TG-CPCB Ceramic PCBs
2.5MB725KB5 minParts List
New PTM
  • TG-NSP35 Non-Silicone Putty Materials
5.0MB1.8MB10 minParts List
  • Thermal Interface Product Selection
3.5MB489KB10 minParts List
  • Thermally Conductive Gap Filler Rolls Product Range
6.4MB3MB30 minParts List
  • TI900 Silicone Based Thermally Conductive Insulators
1.2MB282KB5 minParts List

To view modules, you will need Adobe Flash Player 9, or greater, installed on your computer. Adobe Flash Player is available FREE from Adobe.

Flash Player  |  Flash Player Support Center

NSP-35 One-Part Liquid Thermal Gap FillerNSP-35 One-Part Liquid Thermal Gap Filler - NSP-35 is a one-part, fully-cured, non-silicone gap filler from t-Global. It can be easily dispensed using standard industrial dispensing equipment and can be used to fill gaps over a wide range of tolerances. Its unique formulation makes it highly conformable, form stable in application and produces virtually no compressive forces on solder joints or delicate components. It has a thermal conductivity of 3.5 W/mk.  More...

GP2000 Tube Thermal Interface MaterialGP2000 Tube Thermal Interface Material - GP2000 thermally-conductive tubes are manufactured from high-grade conductive silicone and designed for use with clip-mounted plastic power packages that require both thermal conductivity and electrical isolation. They provide a dielectric breakdown voltage of 7 KV (DC) and a thermal conductivity of 1.3 W/m-k. These tubes are available in various diameters and lengths appropriate for many standard packages. Custom lengths and sizes are also available from t-Global. GP2000 is UL94VO approved and REACH and ROHS compliant.  More...

More about t-Global

t-Global Technology Co., Ltd is dedicated to the development, manufacture and marketing of high-performance thermal interface materials. We pride ourselves on rapid sampling, flexible production methodologies and world-class technical support to our customers. We have significant experience in the thermal management arena and look forward to working with our customers, wherever they are in the world, and however demanding their needs are. And now, our products have been sold in more than 1,500 global customers.
Custom Product Request

t-Global Technology can customize most of their thermal products (Pads, Gels, Greases, Ceramics, etc) to your specifications. Ranging from custom thickness and sizes for sheet product, to various containers for gels and greases, to custom packaging or labeling requirements.

To begin the quote process, please send us an email at Customt-GlobalProducts with a detailed drawing (.DFX format preferred if available) or description of your customization needs.

Below is a sample of t-Global's custom capabilities. If your custom product needs are not on this list, please let us know and we can work with you to find a solution to your particular product or packaging requirements.

Thermal Interface Sheet Materials

View t-Global's Standard Die Cut Product Tolerances

Packaging Options
  1. Bag (good for low volumes)
  2. Bag with tabbed liners (tabbed for easy release and handling)
  3. Kiss cut on a standard sheet (good for high volumes)
  4. Kiss cut on a standard sheet with tabbed liners (tabbed for easy release and handling)
  5. Die cut parts on a roll with tabbed liners (tabbed for easy release and handling)
  6. Die cut parts on a roll without tabbed liners
  7. Adhesive Options
    1. One side on silicone side
    2. One side on fibreglass side (some products)
    3. Both sides
    4. None
    5. Types of Adhesive
      1. Standard
      2. High performance adhesive - for more rugged applications
      3. Other - as per customers specific request or requirements
  8. Release Liner
    1. Plain - default option
    2. Printed with logo or instructions
Putties, Gels and Greases - Default options are 30 g, 1 kg, and 25 kg pots
  1. 30 g pot
  2. 50 g pot
  3. 1 kg pot
  4. 2.5 kg pot
  5. 10 cc
  6. 30 cc taper tip syringe
  7. 180 cc cartridge
  8. 300 cc aluminum cartridge
  9. 1 gallon pail
  10. 25 kg pail
  11. 64 kg pail
t-Global Technology
Part Search:




Part Search Listing by Category
Manufacturer's Link