Analog Devices Inc. Distributor

Go To Product Training Module Index Page

Digi-Key’s library of more than 1700 exclusive PTM Online… On Demand® product training modules is a collection of training tools created with you – the busy design engineer – in mind. They are provided with the cooperation of participating supplier partners. From this one source, you can learn about the latest products and technologies, download datasheets, check inventory, contact our technical staff, and place an order for same-day shipment.

These modules are available in audio and non-audio formats and listed by supplier in easy-to-find alphabetical order. Simply locate the module that interests you and click on your format of choice. We hope you find these tools useful, and with new modules added continuously, we invite you to stop back often to see what’s new.

Product Training Modules Online...On Demand® is a registered trademark of Digi-Key Corporation.

= Updated Product Training Module - PTM New PTM

= New Product Training Module - PTM

Module Name	Preview	Audio	Non-Audio	Duration	Parts List
ADN469xE Multipoint LVDS Transceivers		2.2MB	755KB	5 min	Parts List
Amplifiers: Active Filter Design Tools		7.2MB	3.1MB	40 min	Parts List
Amplifiers: Current Sense Amplifiers		2.2MB	542KB	5 min	Parts List
Amplifiers: Instrumentation Amplifier Primer		4.5MB	1.5MB	5 min	Parts List
Amplifiers: Instrumentation Amplifiers Performance		5.7MB	900KB	20 min	Parts List
Amplifiers: Op Amp Basics	Play	7.6MB	865KB	30 min	Parts List
Amplifiers: Top 5 Problems in Photodiode Opamp Circuits		4.4MB	1.2MB	5 min	Parts List
Amplifiers: Top Five Instrumentation Amplifier Problems		4.8MB	1.1MB	10 min	Parts List
Amplifiers: Voltage Supervisor 101	Play	3.2MB	650KB	15 min	Parts List
Data Converter: Data Converter Fundamentals	Play	8.2MB	2.3MB	25 min	Parts List
Data Converters: AD5933 Impedance-Digital Converter	Play	4.5MB	1.5MB	25 min	Parts List
Data Converters: ADC Applications	Play	4.5MB	1.3MB	15 min	Parts List
Data Converters: ADC Architecture		5.0MB	900KB	10 min	Parts List
Data Converters: DAC Architectures		4.9MB	671KB	10 min	Parts List
DiffAmpCalc™ Overview		6.7MB	2.4MB	5 min	Parts List
Digital Isolation: ADuM347x DC/DC Controller		3.0MB	940MB	5 min	Parts List
Direct Digital Synthesis Tutorial Series (1 of 7): Introduction		1.6MB	580KB	5 min	Parts List
Direct Digital Synthesis Tutorial Series (2 of 7): The Accumulator		4.2MB	486KB	5 min	Parts List
Direct Digital Synthesis Tutorial Series (3 of 7): Angle to Amplitude Converter	Play	6.4MB	607KB	20 min	Parts List
Direct Digital Synthesis Tutorial Series (4 of 7): Digital-to-Analog Converter		3.6MB	400KB	5 min	Parts List
Direct Digital Synthesis Tutorial Series (5 of 7): Digital-to-Analog Reconstruction Filter		4.8MB	397KB	5 min	Parts List
Direct Digital Synthesis Tutorial Series (6 of 7): SINC Envelope Correction		2.1MB	172KB	5 min	Parts List
Direct Digital Synthesis Tutorial Series (7 of 7): DDS in Action		11MB	8.4MB	5 min	Parts List
DSP Blackfin STAMP BSP		5.6MB	1.2MB	45 min	Parts List
DSP: Arcturus uCBF54x-EMM		5.5MB	1.2MB	5 min	Parts List
DSP: Blackfin Processor Core Architecture Overview		Play	---	55 min	Parts List
DSP: Blackfin® Device Drivers		Play	---	90 min	Parts List
DSP: Blackfin® Optimizations for Performance and Power Consumption		Play	---	60 min	Parts List
DSP: Blackfin® System Services		Play	---	55 min	Parts List
DSP: Interfacing AV Converters to Blackfin Processors		6.4MB	1.2MB	60 min	Parts List
DSP: Multimedia Starter Kit		Play	---	50 min	Parts List
DSP: SHARC Processor Overview		Play	---	30 min	Parts List
Five Things to Know About DACs Part 1: Resolution vs. Accuracy		2.0MB	409KB	5 min	Parts List
Five Things to Know About DACs Part 2: Total Unadjusted Error (TUE)		2.0MB	640KB	5 min	Parts List
Five Things to Know About DACs Part 3: Noise		1.8MB	555KB	5 min	Parts List
Five Things to Know About DACs Part 4: Buffering		2.4MB	514KB	5 min	Parts List
Five Things to Know About DACs Part 5: Dynamic Performance		1.8MB	443KB	5 min	Parts List
Healthcare: Pulse Oximetry Solutions		3.5MB	1.2MB	10 min	Parts List
Indirect Current Feedback Instrumentation Amplifier Applications Guide		4.1MB	420KB	10 min	Parts List
Industrial: Motor Control	Play	4.3MB	763KB	15 min	Parts List
Industrial: Power Line Monitoring		3.8MB	932KB	10 min	Parts List
Industrial: Process Control		3.6MB	588KB	10 min	Parts List
Industrial: Weigh Scale Introduction		4.5MB	1.6MB	10 min	Parts List
Interface: Fully Isolated ADM3251E RS-232 Transceiver		2.8MB	890KB	5 min	Parts List
Interface: High Frequency CMOS Switches for Low Power ISM Applications		2.4MB	689KB	5 min	Parts List
Interface: iCoupler Digital Isolator Technology		2.7MB	537KB	5 min	Parts List
Introduction to Analog RMS-to-DC Technology: Converters and Applications		3.2MB	520KB	10 min	Parts List
Isolated Switching Regulator Using iCoupler Technology		2.9MB	670KB	5 min	Parts List
isoPower Technology		2.8MB	576KB	5 min	Parts List
Microcontroller: ARM7 Applications & Tools	Play	11MB	2.5MB	60 min	Parts List
Microcontroller: ARM7 Core & Microconverters	Play	12MB	2.7MB	60 min	Parts List
Miscellaneous: Practical Guide High Speed PCB Layout	Play	3.1MB	1.8MB	45 min	Parts List
Power Management: ADM1185 - Quad Voltage Monitor & Sequencer		2.2MB	655KB	10 min	Parts List
Power Management: ADP2102 DSP Battery Life Applications	Play	2.5MB	1.1MB	15 min	Parts List
Power Management: Hot Swap Design		8.1MB	2.3MB	20 min	Parts List
Power Management: Low Drop Out (LDO) Regulators		3.3MB	770KB	10 min	Parts List
Power Management: Powering 90nm/65nm FPGAs and Processors		3.9MB	804KB	10 min	Parts List
Power Management: Powering FPGAs		9.8MB	2.5MB	20 min	Parts List
RF: ADF7xxx ISM Transceivers		3.5MB	1.5MB	10 min	Parts List
RF: Choosing and Using RF Detectors		9.0MB	2.0MB	10 min	Parts List
RF: Differential Circuit Design Techniques for Communication Applications	Play	8.7MB	1.2MB	15 min	Parts List
RF: IQ Demodulator	Play	3.7MB	558KB	10 min	Parts List
RF: RF-IF Amplifier Product Overview		4.2MB	1.3MB	10 min	Parts List
Sensors: iSensor™	Play	5.6MB	1.8MB	15 min	Parts List
Sensors: Temperature Sensors		2.9MB	890KB	10 min	Parts List
Switches/Multiplexers: iCMOS™ Switches and Multiplexers for Data Acquisition		2.7MB	764KB	5 min	Parts List
Switches/Multiplexers: Switch Fundamentals	Play	8.7MB	2.7MB	20 min	Parts List

To view modules, you will need Adobe Flash Player 9, or greater, installed on your computer. Adobe Flash Player is available FREE from Adobe.

Flash Player | Flash Player Support Center

AD8436 RMS-to-DC Converter - The Analog Devices AD8436 is a new generation, translinear precision, low power, true RMS-to-DC converter loaded with options. It computes a precise DC equivalent of the RMS value of AC wave-forms, including complex patterns such as those generated by switch mode power supplies and TRIACs. Its accuracy spans a wide range of input levels (see Figure 2) and temperatures. The ensured accuracy of ≤±0.5% and ≤10 μV output offset result from the latest Analog Devices technology. The crest factor error is <0.5% for CF values between 1 and 10. The AD8436 delivers true RMS results at less cost than misleading peak, averaging, or digital solutions. More...

AD8476 Differential Precision Amplifier - The Analog Devices AD8476 is a very low power, fully differential precision amplifier with integrated gain resistors for unity gain. It is an ideal choice for driving low power, high-performance ADCs as a single-ended-to-differential or differential-to-differential amplifier. It provides a precision gain of 1, common-mode level shifting, low temperature drift, and rail-to-rail outputs for maximum dynamic range. The AD8476 also provides overvoltage protection from large industrial input voltages up to ±23 V while operating on a dual 5 V supply. Power dissipation on a single 5 V supply is only 1.5 mW. More...

iCoupler® Digital Isolators - Analog Devices, Inc. Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industry’s only digital isolators with certified 8 mm creepage. More...

ADXL362 Evaluation Boards - The Analog Devices ADXL362 is an ultra-low power, 3-axis MEMS accelerometer that consumes less than 2 μA at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode. Unlike accelerometers that use power duty cycling to achieve low power consumption, the ADXL362 does not alias input signals by undersampling; it samples the full bandwidth of the sensor at all data rates. The ADXL362 always provides 12-bit output resolution; 8-bit formatted data is also provided for more efficient single-byte transfers when a lower resolution is sufficient. More...

Selection Guides

iCoupler Digital Isolator Product Selection and Resource Guide

Tools and Software

NI Multisim, Analog Devices Edition

NI Multisim™ Component Evaluator - Analog Devices™ Edition is a free, downloadable version of National Instruments Multisim 11 Circuit Simulation Software, tailored for evaluating ADI components. SPICE models, online example circuits, and datasheets are all connected through a single evaluation environment. The result is an easier, faster and far more productive approach to design.

Download NI Multisim Component Evaluator - ADI Edition [released 12/2010] Note - this link will take you to the National Instruments website where you can download the tool.

ADIsimPower

ADIsimPower™ design tool is designed to both simplify the IC selection process and to provide the information required to build an optimized dc-to-dc converter. In four simple steps you get a customized power solution for your design, complete with detailed schematic and bill of materials.

Other Design and Selection Tools

Analog Devices Line Card

Data Converters

High Speed ADC Evaluation Board Software and Behavioral Models

ADIsimDAC Tool for Precision D/A's
The purpose of the ADIsimDAC™ tool is to assist the user with finding Analog Devices DAC's and DAC Application Circuits.

ADIsimADC™ Tool
ADIsimADC simulates behavior using many critical specifications of data converters, including offset, gain, sample rate, bandwidth, jitter, latency, both AC and DC linearity. These models provide a way to validate performance of the converter at the system level to determine the applicability of a selected device.

ADIsimDDS™ Tool
The purpose of this tool is to assist a user in selecting and evaluating Analog Devices, Direct Digital Synthesis (DDS) IC's. It allows a user to select a device, enter the desired operating conditions and evaluate its general performance.

Amplifiers

ADI DiffAmpCalc™ Calculator Tool
ADI's new ADI DiffAmpCalc™ is a free, downloadable calculator for designing differential amplifier circuits. The tool is easy to use and features an interactive user interface to quickly get you up and running.

Analog Filter Wizard™ v2.0
Analog Filter Wizard™ helps you select and design in an operational amplifier that fits your filter application needs. It works in conjunction with the Active Filter Synthesis Design Tool which together will guide you through the filter application design process. These steps include Entering Filter Criteria, Reviewing Recommended Parts, Active Filter Synthesis Design, and finally generating a Bill of Materials and/or a Spice Netlist.

RF

ADIsimPLL™ Circuit Design & Evaluation Software
ADIsimPLL enables the rapid and reliable evaluation of new high performance PLL products from ADI. It is the most comprehensive PLL Synthesizer design and simulation tool available today. Simulations performed include all key non-linear effects that are significant in affecting PLL performance. ADIsimPLL removes at least one iteration from the design process, thereby speeding the design- to-market.

ADIsimRF™ Signal Chain Calculator
ADI’s ADIsimRF design tool provides calculations for the most important parameters within the RF signal chain, including cascaded gain, noise figure, IP3, P1dB, and total power consumption.

ADIsimCLK™ Tool
ADIsimCLK is the design tool developed specifically for Analog Devices' range of ultra-low jitter clock distribution and clock generation products. Whether your application is in wireless infrastructure, instrumentation, networking, broadband, ATE or other areas demanding predictable clock performance, ADIsimCLK will enable you to rapidly develop, evaluate and optimize your design.

For more information on ADI’s tools, visit the Analog Devices website.

More about Analog Devices, Inc.

The ADI company brand is recognized throughout the electronics industry for innovative, high-performance technology and world-class engineering support. ADI's portfolio of more than 10,000 products serves the needs of more than 60,000 customers worldwide. ADI's brand, portfolio of products, breadth of customers and core competency in signal processing technology combine to form one of the strongest franchises in the entire semiconductor industry.

ADI currently has a worldwide workforce of approximately 8,600 employees, including 3,100 engineers. There are wafer fabrication facilities using high-performance analog manufacturing processes in Massachusetts, California and Ireland. Additional manufacturing facilities are located in the United States and the United Kingdom. Product test and assembly is conducted at our facilities in the Philippines. Corporate headquarters is located in Norwood, MA, USA.

Since ADI was founded in 1965, its focus has been to solve the engineering challenges associated with signal processing in electronic equipment. ADI's products play a fundamental role in converting real-world phenomena such as temperature, motion, pressure, light and sound into electrical signals to be used in a wide array of applications ranging from industrial process control, factory automation, radar systems and CAT scanners to cellular base stations, broadband modems, wireless telephones, computers, cars and digital cameras.

ADI's unique value to its customers is its ability to overcome the seemingly insurmountable barriers of speed, accuracy and cost, to solve intricate engineering challenges and to create ICs—whether they are general purpose or customized individual components—that enable portability, connectivity and multimedia. ADI designs, manufactures and markets high-performance, high-precision signal processing ICs that make pictures vibrant, voices clear, connections continuous and products portable.

Webinars

Design And Develop Innovative And Robust Touch Sensor Interfaces Using Capacitive-To-Digital Converters
Designing for 1 ppm Voltage Source Accuracy
Designing Power Supplies for High-speed A/D Converter Applications
ECG and Heart Rate Monitoring Design Techniques
Fundamentals of Designing with Semiconductors: Powering Your Circuit Webcast
Noise Optimization in Sensor Signal Conditioning Circuits (Part I)
Noise Optimization in Sensor Signal Conditioning Circuits (Part II)
Options and Solutions For RF System Design
Options, Techniques, and Tradeoffs In Modern RF Transceiver Design
Performance Clocks: Demystifying Jitter
Pros and Cons of using Multi-Channel ADCs
RF Detectors Demystified
Solving Power Design Problems using High Efficiency, Integrated Switching Regulators
System-level Analog Architectures for Process Control I/O Modules
Tips and Tricks for High Speed Printed Circuit Board Design
Understanding and Applying DACs

Brochures

Aerospace and Defense
High Performance Power Management Products

Other Resources from Analog Devices

Technical Support
Quickly connect with our Technical Support teams around the globe:

Get application support from our engineers with product selection and recommendations, design-in support, and troubleshooting.
Our expert specialists are ready to support you with everything to make your design challenges easier.
Connect with us today via email or phone in a choice of languages.

EngineerZONE™ Community

EngineerZone is an online support community for engineers who are using Analog Devices products to ask questions, share knowledge and search for answers to their design questions. Collaborate with Analog Devices engineers and other designers in this open forum at ez.analog.com.

ADI Cross Reference Tool
This cross-reference search will assist you in finding Analog Devices products that are equivalent to other Analog Devices products or products of other manufacturers.

Subscribe to ADI’s newsletter
Stay current on ADI’s new products and design resources with one or more of our e-newsletters.

Analog Devices Solutions for Xilinx FPGAs

Together with Xilinx, the world's leading provider of programmable platforms, Analog Devices develops industry-leading analog solutions to complement FPGA systems. Easy interface and connectivity of ADI components to Xilinx FPGAs is enabled through the use of FMC boards, FMC interposers, and Pmods. For additional seamless integration with Xilinx ecosystems and tools, ADI offers HDL interface code, device drivers, and reference designs.

Analog Devices and Bourns EMC compliant RS-485 Interface Design Tool

Analog Devices and Bourns have partnered to extend their offering of system oriented solutions by co-developing the industry’s first EMC compliant RS-485 interface design tool that provides up to Level 4 protection levels for IEC61000-4-2 ESD, IEC61000-4-4 EFT, and IEC61000-4-5 surge.